Oracle 8.1.7 on WinME
Hi!
I just installed Oracle 8.1.7 on WinME.
Everything is working out fine.
However, while I wanna login to SQL*Plus,
it shows the error as below:
ora-12560: TNS : protocol interface error
Does anyone can help me out?
I am not sure it's my problem or WinME?
The thing is it works well in Win NT.
Thank you!!
Yvonne
Sounds like you tnsnames.ora file isn't configured correctly. I believe you need to run the Net8 Assistant to get you going, or copy your TNSNAMES.ORA file from NT and modify it for ME.
Similar Messages
-
Problems with Personal Oracle Instal on WinME
Hi,
Can someone throw some light on this, please?
I am trying to install Personal Oracle on a machine running ME.
When I use Personal Oracle for '98, it stops with a message about the paths to Source and Destination of the software. I checked many times about the availability of the directories, but it does not go forward. I tried the JREW = ... in the COMPATIBILITY95 section of the WIN.INI without success.
When I try to install Personal Oracle for Win2K, it apparently installs the EE, and tries to configure the network. Here it asks for the name of the host. When the server and the client are to be on the same machine, what is the need for a network connection?
That aside, what is the correct version to install on a ME machine? Are there any work-arounds for these problems?
Any help is appreciated.
Thanks,
[email protected]I have the same problem in ME
null -
Oracle ODBC Driver for Rdb on WinME
The Oracle Universal Installer is not working properly when I try installing the new ODBC driver for Rdb (version 3.0.1.2). The Installer starts, but does not present the NAME field as it has for both Win95 and Win2K. In the destination PATH field is the pathname to the temporary folder I've unzipped the Installer/Driver to and when I change this to an existing folder, i.e., C:\ORAHOME, the Installer informs me that it cannot access the staging area and asks that I check the staging area and destination pathnames.
I have successfully installed the older version 2 driver on ME, but it uses the older installer software. Despite Oracle's claims to the contrary, this new Java-based Installer just doesn't work on ME.
If anyone can help with I would greatly appreciate it. Thanks.
TerryHello,
Take a loot at http://www.connx-net.com/rdb.htm they have a 64 bit ODBC OLE DB JBC and .NET solution.
Regards,
Ant -
Oracle 9.0.1 on RH8.0
hi all,
i am having oracle 9.0.1 CDs for linux but i don't have runinstaller file in the cd. i have the following files on the ist CD
Volume in drive E is Ora 9i DB-Linux1
Volume Serial Number is 47EC-7781
Directory of E:\
01/25/2002 10:12p <DIR> Actions
01/25/2002 10:12p <DIR> Components
01/25/2002 10:12p <DIR> Dialogs
06/11/2001 05:30a 68 disk.label
06/11/2001 05:30a 2,505,873 install1.jar
06/11/2001 05:30a 2,381,301 install2.jar
06/11/2001 05:30a 627,040 install3.jar
01/25/2002 10:12p <DIR> locks
06/11/2001 05:30a 200,762 products.jar
01/25/2002 10:12p <DIR> Queries
when i searched the CD i found the runInstaller in the following location
Directory of E:\Components\oracle.swd.oui\2.0.1.4.0\1\DataFiles\Expanded\install\linux
06/11/2001 05:30a 28,277 runInstaller
06/11/2001 05:30a 53 runInstaller.sh
now i am confussed as how to start and weather these runistalled scrips are usefull for hte installation.
pl help
thanks
kamal mattahi! I manage to install oracle 9i personal of winme. :0
use the universal installer + use the custom installation option + pick the default options in there.
but I lack one user. other faults is still under exploration.
ok.
Poh -
Oracle 9.0.1 error on RH 133 9.01. Please help
I am new to Linux please help me. This message occur while i run runInstaller.
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the
value of the DISPLAY variable.
at sun.awt.motif.MToolkit.<init>(MToolkit.java:43)
at java.awt.Toolkit.getDefaultToolkit
(Toolkit.java:399)
at java.awt.Font.initializeFont(Font.java:106)
at java.awt.Font.<init>(Font.java:121)
at oracle.sysman.oii.oiif.oiifm.OiifmSplashScreen.<init>(OiifmSplashScreen.java:42)
at oracle.sysman.oii.oiif.oiifm.OiifmSplashScreen.<init>(OiifmSplashScreen.java:64)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:423)hi! I manage to install oracle 9i personal of winme. :0
use the universal installer + use the custom installation option + pick the default options in there.
but I lack one user. other faults is still under exploration.
ok.
Poh -
Oracle 8i (8.1.7) Personal Edition on Windows Millenium wont install
I try to install Oracle 8i (8.1.7) Personal Edition on my
Windows Millenium laptop (PIII, 256MB, 30GB). When running
universal installer, after first initial screen when installer
has loaded G:\stage\products.jar (G drive is my CD drive), I got
the following message (I translated from french, so english text
may be a little bit different):
Invalid intermediate area. No top level component
for Wondows 95 is available to install from this
intermediate area.
The original french message is:
Zone intermidiaire non valide. Aucun composant de
niveau supirieur pour Windows 95 disponible pour
linstallation ` partir de cette zone intermidiaire.
I don't know what to do to correct this problem ! I searched
thru provided documentation without finding anything about this
problem. Note that the message talk about Windows 95 but my
system is a Windows Millenium (4.90.3000) with latest upadtes
from Microsoft installed and with IE5.50.
Any help appreciated...
[email protected]
The author for the freeware multi-tier middleware MidWare
The author of the freeware Internet Component Suite (ICS)
http://www.overbyte.beNot only the Oracle Personal Edition but even the Oracle Client
can not be installed on WinMe. I suspect this may be because the
JVM matter. You can try to install JRE1.3.1 and see if it works.
Remember to add in path and Classpath in Autoexec.bat. -
I'm using ODBC to connect to an Oracle database. I've installed the Oracle client successfully in windows 2000, but when i try to do the same in Windows Me, I get an error in the staging area.
any suggestion?
bye
d.
nullIIRC, the Oracle client doesn't officially support Windows ME. If you search the Oracle newsgroups, I know there are a number of folks who have encountered this problem and posted installation workarounds. Be aware that if you get around the installation issue, you may encounter problems later on since the code hasn't been tested on WinME.
Justin -
Error while invoking a WS-Security secured web service from Oracle BPEL..
Hi ,
We are facing some error while invoking a WS-Security secured web service from our BPEL Process on the windows platform(SOA 10.1.3.3.0).
For the BPEL process we are following the same steps as given in an AMIS blog : - [http://technology.amis.nl/blog/1607/how-to-call-a-ws-security-secured-web-service-from-oracle-bpel]
but sttill,after deploying it and passing values in it,we are getting the following error on the console :-
“Header [http://schemas.xmlsoap.org/ws/2004/08/addressing:Action] for ultimate recipient is required but not present in the message”
Any pointers in this regard will be highly appreciated.
Thanks,
SaurabhHi James,
Thanks for the quick reply.
We've tried to call that web service from an HTML designed in Visual Studios with the same username and password and its working fine.
But on the BPEL console, we are getting the error as mentioned.
Also if you can tell me how to set the user name and password in the header of the parter link.I could not find how to do it.
Thanks,
Saurabh -
Error while running a customize report in oracle ebs
Hi ..
can anybody suggest how to solve the follwing error while running a customize report in oracle ebs?
XXIFMS: Version : UNKNOWN
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
Current system time is 03-JUN-2011 11:09:24
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_DATE_FROM='2010/04/01 00:00:00'
P_DATE_TO='2011/06/03 00:00:00'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
stat_low = 9
stat_high = 0
emsg:was terminated by signal 9
ld.so.1: rwrun: fatal: librw.so: open failed: No such file or directory
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program was terminated by signal 9
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 1068011.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 1068011 on node D0005 at 03-JUN-2011 11:09:24.
Post-processing of request 1068011 failed at 03-JUN-2011 11:09:24 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Finished executing request completion options.
Concurrent request completed
Current system time is 03-JUN-2011 11:09:24Please post the details of the application release, database version and OS.
Is the issue with this specific concurrent program?
Can you find any errors in the CM/OPP log files?
Please see if these docs help.
On R12.1.1/Solaris Platform While Generating Oracle Reports Files Failed With Error " ld.so.1: rwconverter: fatal: librw.so: open failed: No such file or directory [ID 1067786.1]
Apps UPG Fail With Error Ld.So.1: Rwserver: Fatal: Librw.So [ID 961222.1]
Thanks,
Hussein -
HELP! Can not install Oracle 8.1.5 w/ RedHat 6.1!
I can not get Oracle 8.1.5 to install onto Linux RedHat 6.1. The
Oracle installation script generates several errors. I have
tried several attempts, using different options, but they all
generate errors.
Please help. The Oracle Installation scripts appear to be very
buggy... or perhaps they are incompatible with the standard
RedHat 6.1 release. Either way, it is very frustrating.
I have documented one of my (failed) installation attempts below.
Does anyone have any words of wisdom?
I am installing Oracle onto a Dell Latitude CPi PC w/ 128MB RAM,
a 366MHz Pentium II, and RedHat 6.1 (using the standard Linux
2.2.12-2 kernel). RedHat was installed using the standard "Gnome
Workstation" configuration.
The Oralce CD is labeled:
"Oralce 8i Enterprise Edition
Release 8.1.5
for Linux
(c) Oracle Corporation 1999"
I got this CD about one week ago at Oracle OpenWorld '99 in Los
Angeles... it should be their "latest & greatest" version so far.
1. Pre-Installation and ./runInstall
I created an "oracle" Unix account w/ groups "oinstall" (the
primary group) and "dba" (a secondary group).
I created directories /u01 through /u04, belonging to oracle.
I setup .cshrc and sourced it, containing:
umask 022
setenv DISPLAY `hostname`:0
xhost +
setenv ORACLE_BASE /u01/app/oracle
setenv ORACLE_HOME ${ORACLE_BASE}/product/8.1.5
setenv ORACLE_SID cprtest
setenv PATH ${ORACLE_HOME}/bin:${PATH}
setenv LD_LIBRARY_PATH ${ORACLE_HOME}/lib
setenv NLS_LANG US7ASCII
I downloaded jre116_v5 and installed to /usr/local/jre.
Finally, I executed (from the "oracle" Unix account):
cd /mnt/cdrom
./runInstall
Problem: I got the error (from ./runInstall):
Initializing Java Virtual Machine from /usr/local/jre/bin/jre.
Please wait...
Error in CreateOUIProcess(): -1
: Bad address
Workaround: Executed the following commands instead:
cd /mnt/cdrom/install/linux
./runIns.sh
3. runIns.sh and root.sh
I selected the following options (from ./runIns.sh):
Source: /mnt/cdrom/stage/products.jar
Destination: /u01/app/oracle/product/8.1.5
Oracle 8i Enterprise Edition 8.1.5.0.0
Typical (585MB)
Installable Components: Oralce Intelligent Agent 8.1.5.0.0
Global Database Name: cprtest.parkrussell.com
SID: cprtest
Directory for Database Files: /u02
Then (when instructed by ./runIns.sh), I attempted to execute
(from the
"root" Unix account):
cd /u01/app/oracle/product/8.1.5
./root.sh
Problem: I got the error:
"bash: ./root.sh: Permission denied"
The execute bit was not set.
Workaround: I executed:
chmod a+x root.sh
./root.sh
5. Configuration Tools
The Oracle Installer (./runIns.sh) attempted to execute:
A. Net8 Configuration Agent
B. Oracle Database Configuration Agent
Problem: The "Oracle Database Configuration Agent" failed with
the following error message:
"One or more tools have failed. It is recommended but not
required that these tools succeed for this installation.
You can now select these tools, read its details to examine
why they have failed, fix those problems, and retry them.
Or, you can click "Next" to continue."
When I selected the "Oracle Database Configuration Agent" for
more info, I got the following additional details (as the cause
of the error):
"A required command line argument is missing."
The log file
"/u01/app/oracle/oraInventory/logs/installActions.log" recorded:
"Command which is being spawned is /usr/local/jre/bin/jre
-Duser.dir=/u01/app/oracle/product/8.1.5/assistants/dbca/jlib
-classpath
/usr/local/jre/lib/rt.jar:/u01/app/oracle/product/8.1.5/jlib/ewt-3_1_10.jar:/u01/app/oracle/produc
/8.1.5/jlib/share-1_0_6.jar:/u01/app/oracle/product/8.1.5/assistants/dbca/jlib/DBAssist.jar:/u01/a
p/oracle/product/8.1.5/assistants/jlib/jnls.jar:/u01/app/oracle/product/8.1.5/assistants/jlib/ACC.
AR:/u01/app/oracle/product/8.1.5/jlib/help-3_0_7.jar:/u01/app/oracle/product/8.1.5/jlib/oracle_ice
4_03_3.jar:/u01/app/oracle/product/8.1.5/jlib/HotJavaBean.jar:/u01/app/oracle/product/8.1.5/jlib/n
tcfg.jar:/usr/local/jre/lib/i18n.jar
DBCreateWizard /createtype seed /numusers NO_VALUE /apptype
NO_VALUE /cartridges NO_VALUE /options NO_VALUE /demos NO_VALUE
/seedloc NO_VALUE /sid cprtest /orahome
/u01/app/oracle/product/8.1.5 /orabase /u01/app/oracle /dbloc
/u02 /clususer NO_VALUE /cluspswd NO_VALUE /nodeinfo NO_VALUE
/gdbName cprtest.parkrussell.com
Invalid Exit Code. The following result code will be used for
configuration tool: 1
Configuration tool Oracle Database Configuration Assistant
failed"
Workaround: There is obviously nothing I can do to fix this
problem. It appears to be an internal bug in ./runIns.sh.
Therefore, I selected "Next" and executed "dbassist" directly.
6. dbassist
I executed:
dbassist
Problem: I got the following error:
"JNLS Execution:oracle.ntpg.jnls.JNLSException
Unable to find any National Character Sets. Please
check your Oracle installation."
Workaround: Press "OK" and ignore the error.
7. dbassist (cont.)
I selected the following options:
Create database
Typical
Copy existing database files from the CD
Global Database Name: cprtest.parkrussell.com
SID: cprtest
Problem: I got the following error:
"CD-ROM drive not detected on this system.
Database not created."
(Note: I've been running the installation scripts from the
CDROM drive this entire time. "df" shows the CDROM drive
mounted on /mnt/cdrom. "ls /mnt/cdrom" works too.)
Workaround: Abort (which generated the additional error: "Unable
to create database. DBCA-00003: No CD-ROM drive detected.") and
run dbassist again, this time using different parameters.
8. dbassist, again
I executed "dbassist" again and selected the following options:
Create database
Typical
Create new database files
Hybrid
Concurrently connected users: 5
Options: Oralce interMedia, Oralce JServer, and iM demos
Global Database Name: cprtest2.parkrussell.com
SID: cprtest2
Create database now
Problem: I got the following error:
"ORA-01012: not logged on"
Workaround: Try, try again.
9. dbassist, one last time
Executed "dbassist" once more and selected the following options:
Create database
Typical
Create new database files
Hybrid
Concurrently connected users: 5
Options: Oralce interMedia, Oralce JServer, and interMedia
demos
Global Database Name: cprtest3.parkrussell.com
SID: cprtest3
Output creation script
Then, I executed (from the "oracle" Unix account):
cd /u01/app/oracle/product/8.1.5/install
setenv ORACLE_SID cprtest3
./sqlcprtest3.sh
Problem: I got the following output:
"Oracle Server Manager Release 3.1.5.0.0 - Production
(c) Copyright 1997, Oracle Corporation. All Rights Reserved.
Oracle8i Enterprise Edition Release 8.1.5.0.0 - Production
With the Partitioning and Java options
PL/SQL Release 8.1.5.0.0 - Production
SVRMGR> SVRMGR> Connected.
SVRMGR> ORACLE instance started.
ORA-01012: not logged on
SVRMGR> 2> 3> 4> 5> 6> 7>
8> 9> CREATE DATABASE "cprtest3"
ORA-01012: not logged on
SVRMGR> Disconnected."
Workaround: Beats me.
10. sqlplus
I attempted to execute sqlplus, but got the following error
message:
"/u01/app/oracle/product/8.1.5/bin/sqlplus: Permission denied."
The execute bit was not set.
Workaround: I executed:
chmod a+x /u01/app/oracle/product/8.1.5/bin/sqlplus
sqlplus
I gave up for now... there were just too many things wrong with
this installation, starting with the very first command I was
supposed to execute (./runInstaller).
I can't fathom why Oracle's installation script has so many bugs.
Am I just doing something terribly wrong?
Please help.
nullI'm using enlightenment version 0.15.5-41, which is more recent
than the 0.15.5-37 version (containing the Oracle installer
patch) that you recommended. Unfortunately, it fails when using
this version.
I also tried installing Oracle using twm, with enlightenment
disabled. This didn't help either.
Furthermore, the errors that I'm encountering in the OUI are
not just toward the end of the installation. They happen from
the very beginning, right after I enter "./runInstall", and
continue every step of the way.
Calvin Mitchell (guest) wrote:
: Check out my thread: "Assistants Failure Toward end of Oracle
: Install" to see where i've gone with this.
: if your running Enlightenment as your window manager you need
to
: upgrade to 0.15.5-37, that will solve the OUI error.
: Let me know if you solve any of your problems.
: Chris Russell (guest) wrote:
: : I can not get Oracle 8.1.5 to install onto Linux RedHat 6.1.
: The
: : Oracle installation script generates several errors. I have
: : tried several attempts, using different options, but they all
: : generate errors.
: : Please help. The Oracle Installation scripts appear to be
very
: : buggy... or perhaps they are incompatible with the standard
: : RedHat 6.1 release. Either way, it is very frustrating.
: : I have documented one of my (failed) installation attempts
: below.
: : Does anyone have any words of wisdom?
: : I am installing Oracle onto a Dell Latitude CPi PC w/ 128MB
: RAM,
: : a 366MHz Pentium II, and RedHat 6.1 (using the standard Linux
: : 2.2.12-2 kernel). RedHat was installed using the standard
: "Gnome
: : Workstation" configuration.
: : The Oralce CD is labeled:
: : "Oralce 8i Enterprise Edition
: : Release 8.1.5
: : for Linux
: : (c) Oracle Corporation 1999"
: : I got this CD about one week ago at Oracle OpenWorld '99 in
Los
: : Angeles... it should be their "latest & greatest" version so
: far.
: : 1. Pre-Installation and ./runInstall
: : I created an "oracle" Unix account w/ groups "oinstall" (the
: : primary group) and "dba" (a secondary group).
: : I created directories /u01 through /u04, belonging to oracle.
: : I setup .cshrc and sourced it, containing:
: : umask 022
: : setenv DISPLAY `hostname`:0
: : xhost +
: : setenv ORACLE_BASE /u01/app/oracle
: : setenv ORACLE_HOME ${ORACLE_BASE}/product/8.1.5
: : setenv ORACLE_SID cprtest
: : setenv PATH ${ORACLE_HOME}/bin:${PATH}
: : setenv LD_LIBRARY_PATH ${ORACLE_HOME}/lib
: : setenv NLS_LANG US7ASCII
: : I downloaded jre116_v5 and installed to /usr/local/jre.
: : Finally, I executed (from the "oracle" Unix account):
: : cd /mnt/cdrom
: : ./runInstall
: : Problem: I got the error (from ./runInstall):
: : Initializing Java Virtual Machine from
: /usr/local/jre/bin/jre.
: : Please wait...
: : Error in CreateOUIProcess(): -1
: : : Bad address
: : Workaround: Executed the following commands instead:
: : cd /mnt/cdrom/install/linux
: : ./runIns.sh
: : 3. runIns.sh and root.sh
: : I selected the following options (from ./runIns.sh):
: : Source: /mnt/cdrom/stage/products.jar
: : Destination: /u01/app/oracle/product/8.1.5
: : Oracle 8i Enterprise Edition 8.1.5.0.0
: : Typical (585MB)
: : Installable Components: Oralce Intelligent Agent 8.1.5.0.0
: : Global Database Name: cprtest.parkrussell.com
: : SID: cprtest
: : Directory for Database Files: /u02
: : Then (when instructed by ./runIns.sh), I attempted to execute
: : (from the
: : "root" Unix account):
: : cd /u01/app/oracle/product/8.1.5
: : ./root.sh
: : Problem: I got the error:
: : "bash: ./root.sh: Permission denied"
: : The execute bit was not set.
: : Workaround: I executed:
: : chmod a+x root.sh
: : ./root.sh
: : 5. Configuration Tools
: : The Oracle Installer (./runIns.sh) attempted to execute:
: : A. Net8 Configuration Agent
: : B. Oracle Database Configuration Agent
: : Problem: The "Oracle Database Configuration Agent" failed
with
: : the following error message:
: : "One or more tools have failed. It is recommended but not
: : required that these tools succeed for this installation.
: : You can now select these tools, read its details to
examine
: : why they have failed, fix those problems, and retry them.
: : Or, you can click "Next" to continue."
: : When I selected the "Oracle Database Configuration Agent" for
: : more info, I got the following additional details (as the
cause
: : of the error):
: : "A required command line argument is missing."
: : The log file
: : "/u01/app/oracle/oraInventory/logs/installActions.log"
: recorded:
: : "Command which is being spawned is /usr/local/jre/bin/jre
: : -Duser.dir=/u01/app/oracle/product/8.1.5/assistants/dbca/jlib
: : -classpath
/usr/local/jre/lib/rt.jar:/u01/app/oracle/product/8.1.5/jlib/ewt-
: 3_1_10.jar:/u01/app/oracle/product/8.1.5/jlib/share-
1_0_6.jar:/u01/app/oracle/product/8.1.5/assistants/dbca/jlib/DBAs
sist.jar:/u01/app/oracle/product/8.1.5/assistants/jlib/jnls.jar:/
u01/app/oracle/product/8.1.5/assistants/jlib/ACC.JAR:/u01/app/ora
: cle/product/8.1.5/jlib/help-
: 3_0_7.jar:/u01/app/oracle/product/8.1.5/jlib/oracle_ice-
4_03_3.jar:/u01/app/oracle/product/8.1.5/jlib/HotJavaBean.jar:/u0
1/app/oracle/product/8.1.5/jlib/netcfg.jar:/usr/local/jre/lib/i18
: n.jar
: : DBCreateWizard /createtype seed /numusers NO_VALUE /apptype
: : NO_VALUE /cartridges NO_VALUE /options NO_VALUE /demos
NO_VALUE
: : /seedloc NO_VALUE /sid cprtest /orahome
: : /u01/app/oracle/product/8.1.5 /orabase /u01/app/oracle /dbloc
: : /u02 /clususer NO_VALUE /cluspswd NO_VALUE /nodeinfo NO_VALUE
: : /gdbName cprtest.parkrussell.com
: : Invalid Exit Code. The following result code will be used
for
: : configuration tool: 1
: : Configuration tool Oracle Database Configuration Assistant
: : failed"
: : Workaround: There is obviously nothing I can do to fix this
: : problem. It appears to be an internal bug in ./runIns.sh.
: : Therefore, I selected "Next" and executed "dbassist"
directly.
: : 6. dbassist
: : I executed:
: : dbassist
: : Problem: I got the following error:
: : "JNLS Execution:oracle.ntpg.jnls.JNLSException
: : Unable to find any National Character Sets. Please
: : check your Oracle installation."
: : Workaround: Press "OK" and ignore the error.
: : 7. dbassist (cont.)
: : I selected the following options:
: : Create database
: : Typical
: : Copy existing database files from the CD
: : Global Database Name: cprtest.parkrussell.com
: : SID: cprtest
: : Problem: I got the following error:
: : "CD-ROM drive not detected on this system.
: : Database not created."
: : (Note: I've been running the installation scripts from the
: : CDROM drive this entire time. "df" shows the CDROM drive
: : mounted on /mnt/cdrom. "ls /mnt/cdrom" works too.)
: : Workaround: Abort (which generated the additional error:
: "Unable
: : to create database. DBCA-00003: No CD-ROM drive detected.")
: and
: : run dbassist again, this time using different parameters.
: : 8. dbassist, again
: : I executed "dbassist" again and selected the following
options:
: : Create database
: : Typical
: : Create new database files
: : Hybrid
: : Concurrently connected users: 5
: : Options: Oralce interMedia, Oralce JServer, and iM demos
: : Global Database Name: cprtest2.parkrussell.com
: : SID: cprtest2
: : Create database now
: : Problem: I got the following error:
: : "ORA-01012: not logged on"
: : Workaround: Try, try again.
: : 9. dbassist, one last time
: : Executed "dbassist" once more and selected the following
: options:
: : Create database
: : Typical
: : Create new database files
: : Hybrid
: : Concurrently connected users: 5
: : Options: Oralce interMedia, Oralce JServer, and interMedia
: : demos
: : Global Database Name: cprtest3.parkrussell.com
: : SID: cprtest3
: : Output creation script
: : Then, I executed (from the "oracle" Unix account):
: : cd /u01/app/oracle/product/8.1.5/install
: : setenv ORACLE_SID cprtest3
: : ./sqlcprtest3.sh
: : Problem: I got the following output:
: : "Oracle Server Manager Release 3.1.5.0.0 - Production
: : (c) Copyright 1997, Oracle Corporation. All Rights
Reserved.
: : Oracle8i Enterprise Edition Release 8.1.5.0.0 - Production
: : With the Partitioning and Java options
: : PL/SQL Release 8.1.5.0.0 - Production
: : SVRMGR> SVRMGR> Connected.
: : SVRMGR> ORACLE instance started.
: : ORA-01012: not logged on
: : SVRMGR> 2> 3> 4> 5> 6> 7>
: : 8> 9> CREATE DATABASE "cprtest3"
: : ORA-01012: not logged on
: : SVRMGR> Disconnected."
: : Workaround: Beats me.
: : 10. sqlplus
: : I attempted to execute sqlplus, but got the following error
: : message:
: : "/u01/app/oracle/product/8.1.5/bin/sqlplus: Permission
: denied."
: : The execute bit was not set.
: : Workaround: I executed:
: : chmod a+x /u01/app/oracle/product/8.1.5/bin/sqlplus
: : sqlplus
: : I gave up for now... there were just too many things wrong
with
: : this installation, starting with the very first command I was
: : supposed to execute (./runInstaller).
: : I can't fathom why Oracle's installation script has so many
: bugs.
: : Am I just doing something terribly wrong?
: : Please help.
null -
Logical operators in Oracle select query
Hello all,
Can i use logical operators in oracle select queries?
for 1 and 0 =0 ; 1 or 0 =0
if i have two fileds in a table COL1 have a value of 1010 and COL2 have a value of 0001.
Is there any way to use select col1 or col2 from table? where or is a logical operator?
Regards,Hi,
NB wrote:
Hello all,
Can i use logical operators in oracle select queries?Sure; Oracle has the logical operators AND, NOT and OR. All the comparison operators, including >, >=, = !=, EXISTS, IN, IS NULL, LIKE and REGEXP_LIKE are really logical operators, since they return logical values. You can use them in SELECT statements, and other places, too.
for 1 and 0 =0 ; 1 or 0 =0
if i have two fileds in a table COL1 have a value of 1010 and COL2 have a value of 0001.It's unclear what you want. Maybe you'd be interested in the BITAND function:
http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/functions014.htm#sthref1080
BITAND is the only logical function that I know of. Many other functions, especially numberical fucntions such as MOD, have applications in logic.
Is there any way to use select col1 or col2 from table? where or is a logical operator?Whenever you have a question, please post a little sample data (CREATE TABLE and INSERT statements), and also post the results you want from that data.
Explain how you get those results from that data.
Always say which version of Oracle you're using. -
Strange scenario,Oracle can not display the data in mysql correctly
I use Heterogeneous Service+ODBC to achieve "oracle access mysql"(any other method?),and now i find Oracle can not display the data in mysql correctly:
-------mysql------------
mysql> create table tst(id int,name varchar(10));
Query OK, 0 rows affected (0.00 sec)
mysql> insert into tst values(1,'a');
Query OK, 1 row affected (0.00 sec)
mysql> select * from tst;
------------+
| id | name |
------------+
| 1 | a |
------------+
1 row in set (0.00 sec)
mysql> show create table tst\G
*************************** 1. row ***************************
Table: tst
Create Table: CREATE TABLE `tst` (
`id` int(11) DEFAULT NULL,
`name` varchar(10) DEFAULT NULL
) ENGINE=MyISAM DEFAULT CHARSET=utf8
1 row in set (0.00 sec)
-------------oracle ------------------
SQL> select count(*) from "tst"@mysql;
COUNT(*)
49
SQL> select * from "tst"@mysql;
id
1
SQL> desc "tst"@mysql;
Name Null? Type
id NUMBER(10)You can make the following query on the result page:
"select * from the_table where movietitle = ? and cinema = ?"
then you set movietitle and cinema to those which the user selected. If the resultset contains more than 0 rows, that means the movie is available.
Below is the sample code, it assumes you have a connection to the database:
PreparedStatement stat = myConnection.prepareStatement("select * from the_table where movietitle = ? and cinema = ?");
stat.setString(1, usersMovieTitleSelection);
stat.setString(2, usersCinemaSelection);
ResultSet res = stat.executeQuery();
if (res.next()) {
out.print("The movie is available");
} else {
out.print("The movie is not available");
}Now just add that to your JSP page. Enjoy ! =) -
SSO to Oracle Forms 6.0 and Oracle Reports 6.0
Hi,
Could somebody please explain how I should implement the SSO so that I can log on a forms application?
Should I use external partner app. ??
How can I parse the right parameters to the forms server ??
thanks,
JeromeHi,
Oracle Forms 6i does not support Advances Security for SQL*Net if this is what your question is. ASO is supported with Forms 9i and above
Frank -
Oracle, Null and empty Strings
Currently I'm facing problems with a class, which contains a String, which
is set to "" (empty String).
When the class is persistent, oracle writes null to the table column
(which seems to be common oracle behaviour) and when retrieving the class,
the field is set to null as well, giving me a lot of null-pointer
exceptions.
Anyway ... I can cope with that (just a lot of extra work)
far worse is the problem, wenn searching objects, that have this field set
to "" oder null.
Oracle can't find the records because JDO creates Querys "where
string=null" or "where string=''" , where oracle expects "where string is
null" to find the records.
Is there a workaround or solution ?Yeah, that would work as well, thx, but since I have to cope with
null-Strings now everywhere in my program, it doesn't hurt just to forbid
empty strings on the program side.
In future times I'll test on Oracle first, then porting to DB/2 - this way
I suppose work is far less to garant compability.
Nevertheless ... having to set the bankcode into quotes is a kodo bug in
my opinion.
Kodo knows the type of classfields (in this case string) and shouldn't
send the parameter as a BigDecimal to the database.
Given that, and having only bankcodes of null (only neccesary when using
Oracle), the method would look like:
public Collection getAccounts (String bankCode)
throws Exception
return getAccounts (Account.class, "bankcode=="+bankcode);
which is how a transparent persistent layer, um, should be , um , I mean
... just transparent ;-D
Marc Prud'hommeaux wrote:
Stefan-
Couldn't you just do something like:
public Collection getAccounts (String bankCode)
throws Exception
String filter;
if (bankCode == null || bankCode.length () == 0)
filter = "(bankCode == null || bankCode == "")";
else
filter = "bankCode == "" + bankCode + """;
return getAccounts (Account.class, filter);
If I understand the problem correctly, this should work for all the
databases.
In article <[email protected]>, Stefan wrote:
What operations are you performing to cause this SQL to be issued? You
say you are having trouble removing objects, but this is clearly not a
DELETE statement. Is this the SQL that is issued when looking up
objects by identity?I'm not removing objects, I was removing just quotes from parameters ;-)
A string column... is it also represented as a string field in your class?Yeah ... just to give you an impression of the code:
First we have a class, representing a bank account:
public class Account {
private AccountMgr myAccountMgr;
private String bankCode;
private String id;
Note, that in nearly all cases bankCode will be a number or null.
I have a second class "AccountMgr", which does all of the persistant stuff
(seaching, making persistent etc.)
This class has two methods, one versatile (protected) to retrieve accounts
by a given filterString and one who just returns accounts by bankCode,
building the expected filterstring. Here is my current working version:
public class AccountMgr {
public Collection getAccounts(String bankCode) throws Exception {
if (bankCode!=null) {
if (bankCode.equals("")) {
throw new Exception("check code, bankCode='' not allowed to get
same behavior from DB2 and Oracle");
// if set, quote the bankCode
bankCode="""+bankCode+""";
return getAccounts(Account.class,"bankCode=="+bankCode);
protected Collection getAccounts(Class accountClass, String filterAdd)
throws Exception {
PersistenceManager pm = MyHelper.getPersistenceManager();
String filter="";
if (filterAdd!=null && !filterAdd.trim().equals("")) {
filter+=filterAdd + " && ";
filter += "myAccountMgr==_accMgr";
Query query = pm.newQuery(accountClass, filter);
query.declareParameters("AccountMgr _accMgr");
return (Collection) query.execute(this);
As you can see, in the first method I have to set the bankCode into
quotes, when it's not null.
This is because otherwise a filter like "bankCode=1234" will be translated
in a way, where 1234 is send as a BigDecimal to the database:
[...] executing statement <4239745>: (SELECT [...] FROM JDO_ACCOUNT t0
WHERE t0.BANKCODE = ? : [reused=1;params={(BigDecimal) 1234}]
Marc Prud'hommeaux [email protected]
SolarMetric Inc. http://www.solarmetric.com -
Installation Problem on Pentium4 with ORACLE 8.1.7 Client
I tried to Install the ORACLE Client 8.1.7/8.1.6 on Pentium4 with NT platform. On inserting the CD it gave the first prompt and after Clicking the "INSTALL/DE-INSTALL PRODUCTS", system stops. Checking in the TaskManager helps us to know that 'setup.exe' and 'java.exe' were started for a fraction of the second and then stopped.
Tried to explore the issue and it seems that the JAVA version which ORACLE is using for the INSTALLATION of 8.1.7 is NonCompatible with the P4[NT Platform].
However, 8.0.5/8.0.6 Client version were successfully Installed on the same configuration.
Can Anyone help me out in Installing 8.1.6 on P4[NT base].
Thanks in advanceIs the machine you're trying to install on the
machine your display is running on?
If not, doing a
'xhost + name_of_machine_you_are_installing_on'
on the machine your display is running on should do the
trick.
Hope that helps.
M. Geselle
Maybe you are looking for
-
Poor performance and high number of gets on seemingly simple insert/select
Versions & config: Database : 10.2.0.4.0 Application : Oracle E-Business Suite 11.5.10.2 2 node RAC, IBM AIX 5.3Here's the insert / select which I'm struggling to explain why it's taking 6 seconds, and why it needs to get > 24,000 blocks: INSERT INTO
-
HT4528 How to unlock my iphone if I locked it?
I set a lock on my iphone and I don't remember my password. How do I get it to unlock?
-
How to combine TrivialPageFlowEngine with JAZN XML-based provider ?
With help TrivialPageFlowEngine possible will limit access to pages, and also to set pages for logon. However, JAZN XML-provider provides the same functionality. How to combine these two approaches
-
Hi, I'm looking for an "User Access Report" but other the one in the Vibe Administration Console only with rights, that are dedicated granted to the user account, not the access rights a user get due to group memberships or inheritance. If there is n
-
Time to search PATH varies by HOME directory path ?
I have a rather strange question, as I am running in a somewhat strange environment. I have a SunBlade running Solaris connected via Cisco VPN to my corporate network. After I start the VPN I run a number of mount commands to make my local environmen