Oracle 8i batch command

All,
I have a situation where I am running 8i, looking to execute several (3) Stored Procs during a set time intervals...
I am under the impression that the REPEAT command can perform this quite well...
However I am having problems..
Any suggestions?

I did, however I am cautious due to I am using 9i to command an 8i database. From my understanding, two versions are not user friendly or intuitive...
I wrote dbms_job
EXECUTE stored_proc Immediate.

Similar Messages

Batch command line in the Discoverer 4i

Dear All,
I am searching for an answer regarding the chance to use the batch command line in the Discoverer 4i user edition to export an xls file with the pivot format.
It is not possible to do this in the previous version, but it's possible in the 4i version choosing the xls pivot format while exporting the report interactively.
So we are looking for a specific parameter to be used in the command line.
Thank you for your help,
Carola Buora

Hi Carola,
May I suggest reposting this question to the Dicoverer forum
http://forums.oracle.com/forums/forum.jsp?id=422740
Your chances for getting the right set of answers are probably much better there. Hope this helps.
Cheers,
-lars

I am trying to install oracle 11g xe on ubuntu aws instance when i execute sudo /etc/init.d/oracle-xe configure command iam getting this error: sudo: /etc/init.d/oracle-xe : command not found

i am trying to install oracle 11g xe on ubuntu aws instance when i execute sudo /etc/init.d/oracle-xe configure command iam getting this error: sudo: /etc/init.d/oracle-xe : command not found.

"command not found" means ... there is no such thing.
Has the .rpm been installed?
http://docs.oracle.com/cd/E17781_01/install.112/e18802/toc.htm#XEINL122

Batch command in FileAdapter

Till yesterday the batch command in file adapter working fine, from today none of the batch commands in file adapter are not working. Please suggest the solution?

I have a requirment where i have to raise PI alerts when proxy exceptions getting triggered.
I came to know , we have to call function module 'SALRT_CREATE_API' in the proxy.
Can any one let me know the step by step configuration as iam already reffering to
http://help.sap.com/saphelp_nw04/helpdata/en/d0/5e073c8e56f658e10000000a114084/content.htm
Any pdf would be appreciated?

Installing Oracle - /etc/init.d/oracle-xe configure command missing?

I've AMD64 system with Ubuntu 11.04 installed. It's been rough ride for me to install oracle-xe-universal. I've already spent more than 2 days on this. Still unsuccessful.
1) First I downloaded the packages libaio_0.3.104-1_i386.deb and oracle-xe-universal_10.2.0.1-1.1_i386.deb
2) Then I ran
sudo apt-get install bc (ran fine)
sudo dpkg -i --force-architecture libaio_0.3.104-1_i386.deb (ran fine)
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb (gave me dependency error for libc6 (>= 2.3.2), I modified the control file to remove dependency and rebuilt the package) (now worked fine)
Oracle xe is now installed. Then I tried to start the DB it started but it's HTTP client never started. So I decided to uninstall the oracle-xe=universal. None of the sudo apt-get remove oracle-xe-universal command's didn't worked for me. So i went for manual uninstallation directions as per oracle link.
I ran the following command-
Manually uninstalling Oracle 10g
sudo rm -rf /usr/lib/oracle /etc/oratab /etc/init.d/oracle-xe /etc/sysconfig/oracle-xe /usr/share/doc/oracle_xe /usr/share/doc/oracle_xe_client
Then I again ran the following command to install oracle-xe
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.0_i386.deb
See below what I got as the output-
rocky@ubuntu:~/git/mygit/edas2/libaio$ sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb
dpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
(Reading database ... 184865 files and directories currently installed.)
Preparing to replace oracle-xe-universal:i386 10.2.0.1-1.1 (using oracle-xe-universal_10.2.0.1-1.1_i386.deb) ...
Unpacking replacement oracle-xe-universal:i386 ...
Setting up oracle-xe-universal:i386 (10.2.0.1-1.1) ...
Executing Post-install steps...
Processing triggers for ureadahead ...
Processing triggers for bamfdaemon ...
Rebuilding /usr/share/applications/bamf.index...
Processing triggers for desktop-file-utils ...
Processing triggers for python-gmenu ...
Rebuilding /usr/share/applications/desktop.en_US.utf8.cache...
Processing triggers for man-db ...
Processing triggers for python-support ...
rocky@ubuntu:~/git/mygit/edas2/libaio$
Now if I try to run the following command, it says command not found-
rocky@ubuntu:~/git/mygit/edas2/libaio$ sudo /etc/init.d/oracle-xe configure
sudo: /etc/init.d/oracle-xe: command not found
rocky@ubuntu:~/git/mygit/edas2/libaio$
Even in applications menu I don't see the if oracle has been installed.
So i conclude first time installation was ok but somehow http client didn't worked.
After manual uninstallation, second installation didn't even loaded/installed the oracle-xe in init.d directory.
Please help here.

user1680826 wrote:
I've AMD64 system with Ubuntu 11.04 installed. It's been rough ride for me to install oracle-xe-universal. I've already spent more than 2 days on this. Still unsuccessful.Not surprising, given that Ubuntu is not a supported OS for Oracle products.
Any reason you are not using a supported OS?
And any reason you are running two threads on the same problem? /etc/init.d/oracle-xe is missing?
>
1) First I downloaded the packages libaio_0.3.104-1_i386.deb and oracle-xe-universal_10.2.0.1-1.1_i386.deb
2) Then I ran
sudo apt-get install bc (ran fine)
sudo dpkg -i --force-architecture libaio_0.3.104-1_i386.deb (ran fine)
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb (gave me dependency error for libc6 (>= 2.3.2), I modified the control file to remove dependency and rebuilt the package) (now worked fine)
Oracle xe is now installed. Then I tried to start the DB it started but it's HTTP client never started. So I decided to uninstall the oracle-xe=universal. None of the sudo apt-get remove oracle-xe-universal command's didn't worked for me. So i went for manual uninstallation directions as per oracle link.
I ran the following command-
Manually uninstalling Oracle 10g
sudo rm -rf /usr/lib/oracle /etc/oratab /etc/init.d/oracle-xe /etc/sysconfig/oracle-xe /usr/share/doc/oracle_xe /usr/share/doc/oracle_xe_client
Then I again ran the following command to install oracle-xe
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.0_i386.deb
See below what I got as the output-
rocky@ubuntu:~/git/mygit/edas2/libaio$ sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb
dpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
(Reading database ... 184865 files and directories currently installed.)
Preparing to replace oracle-xe-universal:i386 10.2.0.1-1.1 (using oracle-xe-universal_10.2.0.1-1.1_i386.deb) ...
Unpacking replacement oracle-xe-universal:i386 ...
Setting up oracle-xe-universal:i386 (10.2.0.1-1.1) ...
Executing Post-install steps...
Processing triggers for ureadahead ...
Processing triggers for bamfdaemon ...
Rebuilding /usr/share/applications/bamf.index...
Processing triggers for desktop-file-utils ...
Processing triggers for python-gmenu ...
Rebuilding /usr/share/applications/desktop.en_US.utf8.cache...
Processing triggers for man-db ...
Processing triggers for python-support ...
rocky@ubuntu:~/git/mygit/edas2/libaio$
Now if I try to run the following command, it says command not found-
rocky@ubuntu:~/git/mygit/edas2/libaio$ sudo /etc/init.d/oracle-xe configure
sudo: /etc/init.d/oracle-xe: command not found
rocky@ubuntu:~/git/mygit/edas2/libaio$
Even in applications menu I don't see the if oracle has been installed.
So i conclude first time installation was ok but somehow http client didn't worked.
After manual uninstallation, second installation didn't even loaded/installed the oracle-xe in init.d directory.
Please help here.Edited by: EdStevens on Jul 24, 2011 4:56 PM

Oracle VM Manager Command Line Interface

Can anybody suggest any tool for Oracle VM Manager Command Line Interface?
Are they free?
What kind of jobs we can automate using Command line?
If they are not free is it worth spending money to buy them?

Try public-yum.oracle.com
and look at the oracle-addons channel below OEL.
http://public-yum.oracle.com/repo/EnterpriseLinux/EL5/oracle_addons/i386/
Regards
Sebastian

SQl server to Oracle -- Replicat error command disallowed by current ..

I am trying to set replication b/w sql serve *& oracle..
Source -- SQL server 2005 SP4.
Target - Oracle 11.2.0.3 - using ASM ..single instance..
The error log is ....
2012-02-10 17:33:47 ERROR OGG-00664 Oracle GoldenGate Delivery for Oracle, rcatd1.prm: OCI Error beginning session (status = 15000-ORA-15000: command disallowed by current instance type).
2012-02-10 17:33:47 ERROR OGG-01668 Oracle GoldenGate Delivery for Oracle, rcatd1.prm: PROCESS ABENDING.
2012-02-10 17:34:00 INFO OGG-00987 Oracle GoldenGate Command Interpreter for Oracle: GGSCI command (oracle): edit params RCATD1.
2012-02-10 17:34:10 INFO OGG-00987 Oracle GoldenGate Command Interpreter for Oracle: GGSCI command (oracle): start replicat RCATD1.
2012-02-10 17:34:10 INFO OGG-00963 Oracle GoldenGate Manager for Oracle, mgr.prm: Command received from GGSCI on host 10.1.7.80 (START REPLICAT RCATD1 ).
2012-02-10 17:34:10 INFO OGG-00975 Oracle GoldenGate Manager for Oracle, mgr.prm: REPLICAT RCATD1 starting.
2012-02-10 17:34:10 INFO OGG-00995 Oracle GoldenGate Delivery for Oracle, rcatd1.prm: REPLICAT RCATD1 starting.
2012-02-10 17:34:11 ERROR OGG-00664 Oracle GoldenGate Delivery for Oracle, rcatd1.prm: OCI Error beginning session (status = 15000-ORA-15000: command disallowed by current instance type).
2012-02-10 17:34:11 ERROR OGG-01668 Oracle GoldenGate Delivery for Oracle, rcatd1.prm: PROCESS ABENDING.
edit params RCATD1
REPLICAT RCATD1
SOURCEDEFS /home/oracle/GG/dirdef/catalog.def
USERID ggs,PASSWORD ggs
MAP dbo.tmp_webskuchs,TARGET catalog.tmp_webskuchs;
the steps I am doing are
[oracle@fl1dvmatgdb2 GG]$ ./ggsci
Oracle GoldenGate Command Interpreter for Oracle
Version 11.1.1.1.2 OGGCORE_11.1.1.1.2_PLATFORMS_111004.2100
Linux, x64, 64bit (optimized), Oracle 11g on Oct 4 2011 23:49:46
Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
GGSCI (fl1dvmatgdb2) 1> dblogin userid ggs, password ggs
Successfully logged into database.
GGSCI (fl1dvmatgdb2) 2> start replicat RCATD1
Sending START request to MANAGER ...
REPLICAT RCATD1 starting
GGSCI (fl1dvmatgdb2) 3> info RCATD1, detail
REPLICAT RCATD1 Initialized 2012-02-10 15:28 Status STOPPED
Checkpoint Lag 00:00:00 (updated 02:19:44 ago)
Log Read Checkpoint File dirdat/l2000000
First Record RBA 0
Extract Source Begin End
dirdat/l2000000 * Initialized * First Record
Current directory /home/oracle/GG
Report file /home/oracle/GG/dirrpt/RCATD1.rpt
Parameter file /home/oracle/GG/dirprm/rcatd1.prm
Checkpoint file /home/oracle/GG/dirchk/RCATD1.cpr
Checkpoint table GGS.CHKPT
Process file /home/oracle/GG/dirpcs/RCATD1.pcr
Stdout file /home/oracle/GG/dirout/RCATD1.out
Error log /home/oracle/GG/ggserr.log
can anybody give me a clue why I am getting ora-15000 on GG
Thanks in advance..
Edited by: 898080 on Feb 10, 2012 2:47 PM

Konsultant wrote:
Hi all,
Other details: every time database is started it give message "ORA-15110: no diskgroups mounted" then we manually mount the disk and command
complete successfully. You can find diskgroup name/s with this query :
SQL> select name from v$asm_diskgroup;Then use that diskgroup name in the command that will modify spfile's parameter [ASM_DISKGROUPS|http://download.oracle.com/docs/cd/B28359_01/server.111/b31107/asminst.htm#BHCCHHIG] :
SQL> alter system set asm_diskgroups = 'DISKGROUP_NAME' scope=spfile;
when we execute some sql then recievese error "ORA-01219: database not open: queries allowed on fixed tables/views only". This simply means that your database is not open.
Look:
SQL> startup force mount;
ORACLE instance started.
Total System Global Area 209715200 bytes
Fixed Size                  1248140 bytes
Variable Size              92275828 bytes
Database Buffers          113246208 bytes
Redo Buffers                2945024 bytes
Database mounted.
SQL> select status from v$instance;
STATUS
MOUNTED
SQL> select * from my_table;
select * from my_table
ERROR at line 1:
ORA-01219: database not open: queries allowed on fixed tables/views only
SQL> alter database open;
Database altered.
SQL> select status from v$instance;
STATUS
OPEN
SQL> select * from my_table
no rows selected
when i execute alter database open command recieving "ORA-15000: command disallowed by current instance type".Most likely because your environment is set for ASM instance , and in the case of the 'alter database open' command, environment should be set for RDBMS . See disscusion about that ORA-15000: command disallowed by current instance type
another question is that is it possible that i just drop and recreate the database and add the current diskgroups to new created database.yes

XI to Batch Command Scenario

Hi All,
My scenario is SAP to XI to Batch Command.
The receiver system is a listening port system where it receives data at the port. Currently XI is not the middleware. So the communication happens through EXE. It happens as follows:
1. exe sends a wake up call to Batch Command.
2. Command Batch sends an acknowledgement to exe that it is ready to receive data
3. Now exe sends data to CB.
4. CB sends Ack for data
5. exe sends a sleep call to CB to close connection
6. Cb sends Ack back to exe.
Now exe has to be replaced with XI , so is this set of Communication possible through XI in the same scenario? If yes , then How.
If no what can be the solution.
Also will the Standard adapters in XI serve the purpose for Command Batch since it is not any File system , but it receives data at the port or will Custom adapter will have to be developed for this purpose.
Please help.
Thanks & Regards,
Loveena.

That sounds like a proprietary TCP/IP handshake.
There is no way besides own development of Java code.
You could develop an adapter or a Java proxy for this purpose.
The better option is, replcing the batch command with an HTTP or Webservice enabled program and use standard PI functionality.

Batch commands

Hi,
I am getting followin error
org.apache.commons.digester.Digester error
SEVERE: Parse Error at line 5 column 19: Document is invalid: no grammar found.
org.xml.sax.SAXParseException: Document is invalid: no grammar found.
     at org.apache.xerces.util.ErrorHandlerWrapper.createSAXParseException(Unknown Source)
     at org.apache.xerces.util.ErrorHandlerWrapper.error(Unknown Source)
     at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
     at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
     at org.apache.xerces.impl.dtd.XMLDTDValidator.handleStartElement(Unknown Source)
     at org.apache.xerces.impl.dtd.XMLDTDValidator.startElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanStartElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentScannerImpl$ContentDispatcher.scanRootElementHook(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.DTDConfiguration.parse(Unknown Source)
     at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
     at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
     at org.apache.commons.digester.Digester.parse(Digester.java:1567)
     at org.apache.catalina.startup.ContextConfig.tldScanStream(ContextConfig.java:977)
     at org.apache.catalina.startup.ContextConfig.tldScanTld(ContextConfig.java:1006)
     at org.apache.catalina.startup.ContextConfig.tldScan(ContextConfig.java:870)
     at org.apache.catalina.startup.ContextConfig.start(ContextConfig.java:647)
     at org.apache.catalina.startup.ContextConfig.lifecycleEvent(ContextConfig.java:243)
     at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:166)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:3582)
     at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:821)
     at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:807)
     at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:595)
     at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDeployer.java:307)
     at org.apache.catalina.core.StandardHost.install(StandardHost.java:788)
     at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:559)
     at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:401)
     at org.apache.catalina.startup.HostConfig.start(HostConfig.java:718)
     at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:358)
     at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:166)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1196)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:754)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1188)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:363)
     at org.apache.catalina.core.StandardService.start(StandardService.java:497)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:2190)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:512)
     at org.apache.catalina.startup.Catalina.execute(Catalina.java:400)
     at org.apache.catalina.startup.Catalina.process(Catalina.java:180)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:203)
[Microsoft][SQLServer 2000 Driver for JDBC]Statements that produce result sets are not allowed in batch commands.
[Microsoft][SQLServer 2000 Driver for JDBC]Statements that produce result sets are not allowed in batch commands.
For input string: "sdfc"
I am using the Tomcat version 4.0 and my xml file has correctly <!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
And the application correctly identifed the servlet and throwing this error from the servlet. Can anybody help in this regard.

I don't think so. I believe your server.xml or your web.xml file is malformed. This means that the DTD that the container validates the file against is not in agreement with the XML you created. See if you can start commenting out elements in your web.xml until the server starts properly to zero in on the problem. Or, if you are comfortable reading DTD's, go straight there to find out the problem.
- Saish

Batch Command Warning Dialog

Hello All
I've set-up an action to resize a folder of photos. Recorded the action, all is good. I go to AUTOMATE > BATCH and go through the set-ups, etc., but when I activate the run, I keep getting this warning dialog:
"Could not complete the Batch command because the disk is not available".
At first I thought it may be looking for the SD card the photos were copied from, but that's not the case as I have imported all the photos and they now reside on the HD. I've tried restarting Photoshop and even restarting the system - both to no avail.
Any idea as to what this dialog is referring to?
Running :
Photoshop CC
27" Late 2013 iMac
3.5 GHz Intel i7
16 GB RAM
NVIDIA GeForce GTX 780 Graphics
OSX 10.9.1
Any help would be MOST appreciated!!
Keith

If all your doing is resizing image to fit within some size you don't even need an action unless you replacing the original files which is not a good idea in any case. For if something goes wrong you could wind up loose everything.
Use menu File Scripts>Image Processor. In the Image Processor Dialog point to the source folder set the output locarion set image file types yoo want to save and the size and option. You can even include actions.
There is also Image Processor Pro a free download which is a more powerful script.

Batch command to auto login

We are using Sony MBPS and it has to be rebooted every month. We have automated much of it using batch files but we would like to further automate it. Is there a batch command to trigger an automatic login of the servers?

Automatic logon can be configured through registry:
http://support.microsoft.com/kb/315231/en-us
The article mentions Windows XP, but it is valid for all later versions of Windows. This is how we do it. We deploy the registry keys through group policy to the machines that need automatic login.

Batch Command Freezes up CS5

Suddenly, when I use the batch command, CS5 freezes up and has to be closed using alt-ctrl-delete. I've been using the command for a long time with no problems. All the other commands under the "Automate" line work. I reinstalled CS5, and it appeared to fix the problem. However, when I scanned a BUNCH of photos, and went to use the command, it froze again. Any ideas?

Ok since I got some free time, I updated to 12.0.4 again, with reallocating the temp path.
The freezing bug is still there, and it's still creating those .mvm file(1-14 inside the C:Temp. and 15 at the root of E). Since http://forums.adobe.com/thread/747353 is still discussing this issue, I'll leave it for a while.
With the update, my selection issue is also remaining there, I'd like to talk about it, since it's not only happnening to selection or magic tool, but to any tools involving moving cursor.
http://www.photoshopgurus.com/forum/photoshop-troubleshooting/29186-photoshop-cs4-cs5-acti ng-like-they-possessed.html
http://digitalweddingchat.com/showthread.php/14289-weird-mouse-problem-in-PS..-posessed-mo use!
I'll save myself the trouble of describing since the above posts have done it really well. And their fixes do not apply to me.
What I could add to this:
1) Regarding the selection tool, this issue mostly happens after I move my cursor, and once it's "activated", I could just click like hell without moving my mouse at all, while creating a crazy record of below( simply caused by clicking mouse, which
"moving marquee>cancel selection>moving marquee>cancel selection>moving marquee>cancel selection>moving marquee>cancel selection>moving marquee>cancel selection>moving marquee>cancel selection>moving marquee>cancel selection>moving marquee>cancel selection>moving marquee>cancel selection>moving marquee>cancel selection>".
But if I simply open PS, and start clicking on the picture with selection tool, keeping my mouse from moving in the first place, then usually I can't duplicate this issue.
2) Also, the issue will also occur if I move my mouse and click, but we could get some hint if we duplicate it this way.The unintended selection caused by this issue, which we take rectangular selection for example, will have a corner at the place where I ever put my cursor at. So from my point of view, it's like photoshop is ignoring my action, which is releasing the left button. For PS, I first move my mouse to point A, pushing left button down, (igored)releasing left button(ignored), moving mouse to point B,and a new unintended selection! Though this pattern only occurs sometimes of the issue, but it might hold some word.
3) As I keep testing, the easiest way to duplicate the issue is to move my mouse for a long distance and click, opposed to rapid small displacement and click.Well not that useful.
4) The way I deal with it now, is to endure it. I keep reselecting and usually the issue will disappear for a while, and come back at unknown future. I tried changing my mouse/graphic card/memory, as well as their drivers, ended up no fixing.
Any idea on this, Noel?
-Monkey

Batch command to find java version

Hi
I need to get the version of java runtime env on a machine using command prompt (more specifically in a batch file). java -version at command prompt gives me the version and other stuff. But has anyone written a batch file that extracts values like 1.3.1 or 1.4.0 by executing a batch command??
Any suggestions woul dbe helpful
Thanks
VP

Here's my thoughtsjava -version 2>tmp.txt //pipe version to file
find "java version" tmp.txt|find "java version">tmp2.txt //just get info
del tmp.txt
for /f %i in (tmp2.txt) do @set version=%i // set a variable
del tmp2.txt
set version=%version:~10,5% // you get offsets
@echo %version%You will need to debug this.
P.S. IS this Java Programming?

Batch command unavailable

Suddenly when I select multiple images in Bridge, then go to Tools>Photoshop>Batch, I get the message "The command "Batch" is currently unavailable." Batch is also greyed out in Automate. This occurs when no other processes are happening. What could it be? Batch command has always worked fine in the past.

So File > Automate > Batch in Photshop is greyed out?
And would you mind providing the relevant information about your set-up (Photoshop-version, OS etc.)?
Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by pressing command-alt-shift/ctrl-alt-shift while starting Photoshop until the appropriate dialog appears after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)

Batch command for using Java in IE

Hello,
I'm looking for a batch command that sets IE to use Java (Sun).
It should do the same job as if manually checking the check box of 'Use <java version> for applet' in advanced internet options of IE.
Is there a way to do it?

Sorry, currently there's no batch command to set IE to use Java from Sun.
There're quite a few registry keys need to be set when that option is selected.
Registry settings for:
- turning off console for MSVM;
- hooking up Sun's Java console to IE;
- adding a "TreatAs" to the Web Browser Applet Control so that applets with applet tag will use Sun's Java;
etc.

Oracle 8i batch command

Similar Messages

Maybe you are looking for