Oracle 8i Client running on Windows 2000 Server

Hi,
I have Oracle 8i Client running on Windows 2000 Server. I need to connect to Oracle 8i Server running on Sun Box.
I have problems with connectivity.
When I do tnsping <service name>, I am geting the followiing
error:
C:\>tnsping <Instance name>
TNS Ping Utility for 32-bit Windows: Version 8.1.7.0.0 - Production on 04-FEB-20
02 16:37:01
(c) Copyright 1997 Oracle Corporation. All rights reserved.
Attempting to contact (ADDRESS=(PROTOCOL=TCP)(HOST=<IP Address>)(PORT=1521)) TNS-12541: TNS:no listener
Can any one help me out
Thanks
mka

Similar Messages

Install Oracle 8i Personald Edition on Windows 2000 Server SP2

Hi
I have problem to install the Oracle 8i Personal Edition on
Windows 2000 Server SP2.
I run the Setup.exe, I become the message (not exactly) “JRE
(Java Runtime Environment) was not found…… please visit
www.javasoft.com….. and install JRE version 1.1.7 or higher…”
Now, I have download and install this JRE (JavaTM 2 Runtime
Environment v 1.2.2_008 / Internationalized version of Java 2
Runtime Environment).
The error-messages comes again.
Have everyone a idea?

hi phill...
why dont you try it out with the same CD and increase your RAM
by another 64MB? This will be enough. The reason is , most
Oracle 8i releases are combined with a java based Oracle
Universal Installer. This requires some good amount of RAM. Just
try it out with some extra memory. If this also didnt work, then
send in the problem,error with your system config. This will
help me in solving your problem.
Imran.

Can I install Oracle 8.1.5 on Windows 2000 server or Windows 2000 professional

Hi,
Can I install Oracle 8.1.5 on a Windows 2000 server or Windows 2000 professional server?
Regards,
Zurvaan

Yes, of course. Both versions works but you have to be prepared for lots of RAM.

Oracle 8.0.6 on Windows 2000 Server

Can Anybody tell me that Oracle 8.0.6 Enterprise version can run on Windows 2000 Advance server

I've tried installing oracle 8.0.5 and it runs perfectly on windows 2000. I see no reason why 8.0.6 won't work. However, if you've installed oracle on windows 2000 and uninstalled it to install the same version or another version you will need to reinstall your windows 2000 from the ground.

Oracle 8i Client/ODBC with Windows 2000

Ever since I upgraded(?) to that wonder of modern science, I can't seem to get my Oracle client to work. I've tried every remedy on metalink and still nothing. It's always the same error shown below. Besides moving to Linux, what else is there for me to try?
Fatal NI connect error 12571, connecting to:
(DESCRIPTION=(CONNECT_DATA=(SID=*)(SERVICE_NAME=savant)(CID=(PROGRAM=D:\Oracle\Ora81\BIN\SQLPLUSW.EXE)(HOST=RODDJ)(USER=rjohnson)))(ADDRESS=(PROTOCOL=TCP)(HOST=savant)(PORT=1521)))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 8.1.6.0.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 8.1.6.0.0 - Production
Time: 12-DEC-2000 15:44:12
Tracing to file: c:\temp\sqlnet_1468_1.trc
Tns error struct:
nr err code: 0
ns main err code: 12571
TNS-12571: TNS:packet writer failure
ns secondary err code: 12560
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
null

I'm also having this problem.
I'm setting up a C++Builder Application to work with the Oracle
8i Release 2 (8.1.6) using ODBC. Both the clients and the server
are running Windows 2000 Professional. I get the error
"[Oracle][ODBC]Invalid datetime format" whenever I have a DATE
column with a NULL value in it. I tried downloading the latest
ODBC driver from the Oracle web site but this did not solve the
problem. Right now our only solution is to make all the
DATE columns NOT NULL. Do you have any other suggestions?

Problem Installing Oracle 8.0.5 on Windows 2000 Server (SP2)

When i trying to install Oracle 8.0.5 on Windowns 2K Server
(with SP2), after migration from NT4, the process the
installation stop (CD, screen) when load DLLs Oracle, without
msg error.
(I Know Oracle 8.0.5 is pretty old, but...i have).
I'm not sure what the problem is. Any help/commands/how to
would be great? If anybody has any idea of why I am experiencing
this problem, I would appreciate the help.
Thanks,
MJP

Don't install SP2 on Win2k.
Reinstall Win2K without SP2.
Alex.

Developer 6i Installation with Oracle 8i on Windows 2000 Server

Hi Folks,
     We are using Oracle 8i (8.1.7) with Developer 6i for the past 2-3 years. Oracle 8i is installed on Windows 2000 Server and the client machines have Developer 6i installed. Using the Net 8 Easy Configuration Utility, the clients and the server are linked perfectly and we have never experienced any major issue regarding the connectivity from the clientâs sides.
     Now my question is that, is there any possibility that we can also install Developer 6i on the server, âcause we have tried this several times and every time after installing Developer 6i on the server, the Net 8 Easy Configuration Utility does not invokes and obviously we are unable to use any of the Developer 6i products and moreover after installing Developer the already installed 8i Database does not gets mounted and we are also unable to use the database.
     Are we missing some basic stuff here or do we need to run some patch for Windows 2000 Server?
     Another thing, all our forms and reports are residing on clientâs hard disks; can we also have the option that the forms and reports should also reside on the server so that we can easily update our forms and reports definitions from the server side?
TIA
Hassan

Hi,
Yeah, I installed both the products i.e, database and developer in separate directories.
Hassan

Error while installing CRM 4.0 SR1 with Oracle 10.2 on Windows 2000 Server

Hi.. I'm getting error messages in the Database Instance phase, while installing CRM 4.0 SR1 with Oracle 10.2 on Windows 2000 Server. Following are message snippets with last few lines showing error message:
SAPSSEXC.log
[code](DB) INFO: REPOSRC~0 created
(DB) INFO: REPOTEXT created
DbSl Trace: ORA-4031 occured when executing SQL statement (parse error offset = 0)
(IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 99, table "REPOTEXT"
(SQL error 4031)
error message returned by DbSl:
ORA-04031: unable to allocate 84 bytes of shared memory ("shared pool","select name,intcol#,segcol#,...","Typecheck","opndef:qkexrAddMatching1")
(DB) INFO: disconnected from DB
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: END OF LOG: 20121102144208
[/code]
SAPAPPL2.log
[code](DB) INFO: SMOT413~0 created
(DB) INFO: SMOT413~R04 created
DbSl Trace: ORA-604 occured when executing SQL statement (parse error offset = 31)
(DB) ERROR: DDL statement failed
(CREATE INDEX "SMOT413~R05" ON "SMOT413" ( "MANDT" , "ERSKZ" ) TABLESPACE PSAPCRM STORAGE (INITIAL 16384 NEXT 0000000040K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 4108 bytes of shared memory ("shared pool","select owner#,name,namespace...","Typecheck","seg:kggfaAllocSeg")
(DB) INFO: disconnected from DB
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: END OF LOG: 20121102144207
[/code]
SAPSLEXC.log
[code]DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) INFO: CO2MAP created
(IMP) INFO: import of CO2MAP completed (0 rows)
(DB) INFO: CO2MAP~0 created
(DB) INFO: CO2MAP~IDX created
DbSl Trace: ORA-604 occured when executing SQL statement (parse error offset = 0)
(DB) ERROR: DDL statement failed
(CREATE TABLE "CO2MAPINF" ( "SRCID" VARCHAR2(30) DEFAULT ' ' NOT NULL , "METHID" VARCHAR2(1) DEFAULT ' ' NOT NULL , "APPLNAME" VARCHAR2(30) DEFAULT ' ' NOT NULL , "PAGEKEY" VARCHAR2(70) DEFAULT ' ' NOT NULL , "ID" NUMBER(10) DEFAULT 0 NOT NULL , "LANGUAGE" VARCHAR2(1) DEFAULT ' ' NOT NULL , "NAMESPACE" VARCHAR2(30) DEFAULT ' ' NOT NULL ) TABLESPACE PSAPCRM620 STORAGE (INITIAL 16384 NEXT 0000000640K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 2
ORA-04031: unable to allocate 84 bytes of shared memory ("shared pool","select ts#,file#,block#,nvl(...","Typecheck","opndef:qkexrAddMatching1")
(DB) INFO: disconnected from DB
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: END OF LOG: 20121102144742
[/code]
SAPSDIC.log
[code](DB) INFO: TNMAP~0 created
(DB) INFO: TODIR created
DbSl Trace: ORA-604 occured when executing SQL statement (parse error offset = 0)
(IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 99, table "TODIR"
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 4108 bytes of shared memory ("shared pool","update seg$ set type#=:4,blo...","Typecheck","seg:kggfaAllocSeg")
(DB) INFO: disconnected from DB
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: END OF LOG: 20121102144811
[/code]
SAPSDOCU.log
[code](DB) INFO: TLSY3~0 created
(DB) INFO: TLSY5 created
(IMP) INFO: import of TLSY5 completed (3 rows)
DbSl Trace: ORA-604 occured when executing SQL statement (parse error offset = 33)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "TLSY5~0" ON "TLSY5" ( "LANGU", "REL", "OLD_REL", "IMP_DATE" ) TABLESPACE PSAPCRM STORAGE (INITIAL 16384 NEXT 0000000080K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 4108 bytes of shared memory ("shared pool","update seg$ set type#=:4,blo...","Typecheck","seg:kggfaAllocSeg")
(DB) INFO: disconnected from DB
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: END OF LOG: 20121102144811
[/code]
I am not sure but I think the problem is with the allocated shared memory size, which right now is:
init.ora
[code]shared_pool_size = 67108864[/code]
init<SID>.ora
[code]shared_pool_size = 90112000
shared_pool_reserved_size = 9011200
[/code]
If this is the cause of the problem then how much should i increase it to? and do i need to modify the size in both files or only init<SID>.ora? Is there any SAP Note related to this problem? Thanks.
Regards,

Hi Vasu,
ORA-4031... for 99% of cases this means one thing:
the database instance is not configured correctly.
To proceed, do the following:
1. get rid of init.ora (it's not used at all)
2. make sure that the init<sid>.ora file is really used.
 If there is a spfile in the %ORACLE_HOME&/database folder
 then this will be used.
3. With your configured shared pool of 85MB your memory should really not be filled up - anyhow it's really too small for a SAP system!
Thus I'd check how much memory the other sga-area members (buffer cache, large pool, streams pool, java pool...) take up.
 Remember on Windows 32 Bit, everything runs in one single process that can only allocate 2GB (or 3GB if you've set this option).
See note:
<a href="https://websmp102.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=869006&_NLANG=E">#869006 - Composite SAP note: ORA-04031</a>
for more on this.
And when you're setting up parameters anyway, check note
<a href="https://websmp102.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=830576&_NLANG=E">#830576 - Parameter recommendations for Oracle 10g</a>
KR Lars

Oracle 8i 8.1.7 on Windows 2000 Server

After I install Oracle 8.1.7 on Windows 2000 Professional, Everything is Good, database and Enterprise Manager Server startup normal.
But when I install Oracle 8.1.7 on Windows 2000 Server, the Oracle Service startup normal , but the database instance can not startup automatical, I must startup the database instance manual using svrmgrl program and the Enterprise Manager Server can not startup ?

check it:
start
-->program
-->$oracle_home$
-->Database Administration
-->Oracle Administration Assistant for Windows NT
oracle instance 'startup/shutdown options'

Oracle 8 installation in Windows 2000 Server

I can't install oracle Enterprise Manager (Oracle 8 product) in a Windows 2000 Server system. The installation program show me this error message:
"Unable to delete the NT Service for the
SQL * NT V2 listener"
Can any body have the solution?

Supposedly you need to find these 3 files.
SQLNET,TNSNAMES, LISTENER using your windows find from start. change the names of the dev ones to .bak or something else.
copy the files from your 8i/network/admin into those 2 other places (forget the/samples directories). restart the database and it should connect (Developer stuff to database) A friend of mine did this on W2K and it wokred fine. I have tried it on win98 with 8i personal edition for win 98 and DEV 6 and it failed. So if anyone knows anything I am missing let me know. SQL+ works fine so I knw the DB is fine.
Thanks,
Michael

Moving oracle 8i db running in windows 2k3 srvr to another machine

hi everybody,
my scenario is very simple but i am not able to do that so plz give ur soln wth proper sql commands and steps.
i want to move oracle 8i db running in windows 2003 server to another machine running in same server how can i do this.
my database name is att.
path: c:\oracle\ora81\database
path: c:\oracle\oradata\att
inside this cntrl files, log files and trace files are there.
path: c;\oracle\admin\att
inside this pfile,udump,bdump,cdump are there.
so kindly provide me soln asap as i hav to do it by tmw.
plz oracle dba experts and professionals help me.
thanks
suresh

Why have you made a duplicate post?
moving 8i database\very urgent\plz
Questions and suggestions in that thread are unanswered from your side.

Citrix Client M/c Not Responding - Windows 2000 Server

Hi all,
I have Windows 2000 Server with Terminal Services and Citrix Metaframe 1.8 for Windows 2000 running on it. We are using Oracle Apps 11i and Oracle 8i on Sun Solaris 8.
The Citrix Clients are Win 95/98 m/c running ICA32. The ERP Application is run by the clients through Citrix Server using IE5.0
Some of the forms are not responding always when client is using citrix technology but the same client(s) can run the application when he is using his own IE5.0
Can somebody help us out. Is it supported by Oracle Apps 11i or not. Or some fine tuning is to done or some patches are required to be downloaded.
Thanks in advance.
Dinesh Yadav
null

Is this a true Apps 11i environment? Why do you need to go through Citrix instead of direct browser access?

Oracle 8.1.7 Server Installation on a P4 Windows 2000 Server

I am trying to Install Enterprise Oracle 8.1.7 on a P4 Windows 2000 Server Machine. I had a solution regarding the P4 bug, which asked the latest Service Pack for Win 2000 to be installed, the Oracle CD dump copied to hard disk and symcjit.dll to be renamed. This enabled me to start the Installation Process. I chose the Administrator option during installation.
However I noted that only Oracle Client is Loaded and NOT Server. I do not get any options to install Server. I only have 1 CD for Enterprise Oracle 8.1.7 which should have both Server Programs and Client Programs to Install I believe!
Any help would be appreciated!!!
Thanks

Dear Nandakumar Ananthanarayan,
I read your posting and I seem to have a similar problem.
I am trying to install Oracle8i ver 8.1.7 on WINDOWS 2000
SERVER with service pack 3 on an Intel Xeon Processor at 2.4GHz.
Raid 5 is used on 3x36GB Hard Drives.
When the Oracle8i CD is inserted the initial screen comes up.
From this I choose "Install/Deinstall Products".
After this nothing at all happens.
The initial screen closes and the system is as it was.
I would be obliged if you could help me out.
Yours Sincerely,
Chris.

Problem installing Oracle 8i(8.1.7) standard edition on windows 2000 server

I am trying to install Oracle 8i (8.1.7) standard edition on windows 2000 server but the setup program doesn't run.
It starts up, allocates some ram then closes before a window even pops up.
I also have MSSQL server installed on this computer, does that conflict?
Has anyone encountered this problem before? If so, please give a solution if you have one, thanks,
OPS

Yes. There is a bug with Pent4, Win2000 & Oracle8i.
Here is the workaround:
This is a known bug with Oracle java-based applications and Pentium 4 Use this work-around:
1) Copy the install directory from the CD to the hard disk.
2) Edit oraparam.ini and modify it as follows:
* Edit the "SOURCE=" line to to show the full path to the CD ; SOURCE={CD DRIVE LETTER}:\stage\products.jar)
* Edit the "JRE_LOCATION" line to show the full path to the CD ;
JRE_LOCATION={CD DRIVE
LETTER}:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles\Expanded)
* Edit the "OUI_LOCATION" line to show the full path to the CD ;
OUI_LOCATION={CD DRIVE
LETTER}:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataFiles\Expanded
* Edit the "JRE_MEMORY_OPTIONS" line to include "-nojit" as the first argument ;
JRE_MEMORY_OPTIONS=-nojit
-ms16m -mx32m
3) Start setup.exe from your hard drive
Choose a Custom install and choose not to create a database during the install.
This way, the Database
Configuration Assistant will not be launched during installation. DONT SELECT
NET8 products for installation.
You need to put the same java parameters for the DB configurator and the Net8
Configurator
to run.
-nojit -ms16m -mx32m before -classpath on:
* assistants\dbca\DBAssist.cl
* network\tools\netca.cl
** Run the DataBaseConfigurationAssistant and NetworkConfigurationAssistant after installation.
Hope it helps!
Amrit

Cisco Security Manager Client running on Windows Server 2008 R2 (64 bit) in Terminal Service

Hello CSM Gurus,
Would there be any performance issues in CSM client software design if multiple instances of CSM client by multiple users ran concurrently on a Windows Server 2008 R2(64 bits) while CSM users accessing the server via Remote Desktop Services ?
In my environment, we have a CSM server at our major data center while security administrators from all over the world need to use this CSM server.
In order to overcome the latency of the CSM client due to the WAN network, the plan is to use a Windows Server 2008 R2(64bits) as a terminal server and all security administrators would need to access this terminal server via RDP and would launch CSM client on their desktop. The terminal server locates on the same LAN as the CSM server itself in order to minimize network latency in communications between the CSM clients running on the terminal server and the CSM server. there would be multiple instances of CSM clients running concurrently on the Windows Server 2008 R2, the terminal server.

Hi;
please check
Oracle Database 11g Release 1 (11.1.0.7.0) <<Oracle Database 11g Release 1 (11.1.0.7.0) for Microsoft Windows Server 2008 x64
http://www.oracle.com/technology/software/products/database/oracle11g/111070_win64_2008soft.html
Check Database 11g Release 2 Certification Highlights [ID 1065024.1]
But please check this thread
client 11gR2 install on Win 7 Pro fails java.lang.NullPointerException
Regard
Helios
Edited by: Helios- Gunes EROL on May 14, 2010 4:49 PM

Oracle 8i Client running on Windows 2000 Server

Similar Messages

Maybe you are looking for