Oracle 8i Database Download

Hi,
Can anybody give me the link to get Oracle8i Database for solaris.
Thanks,
Ashwin

Did you ever solve this problem? I have downloaded 8.1.7 three times with the same results?
Everytime I download the database from the developer area, it appears to go great.
However, neither Winzip or PKunzip can work the file. They always encounter errors that are not fixable. This happens 100% of the time.
It is frustrating considering the size of the file.
NT 4.0 system with plenty of hard drive.
Any input would be appreciated.
Thanks,
Lance

Similar Messages

Oracle 9i Database Download Problem

I have been trying to download a Personal Edition of Oracle 9i database.This fails with a page not found error.
- Server name : UK
- Filename : Oracle 9i database
- Date/Time : 14:20 pm (GMT)
- Browser + Version : IE 5
- O/S + Version : Windows 2000
- Error Msg : Page not found

Hello,
Due to the popularity of OTN's software downloads, we sometimes experience periods of high load on our systems. We apologize for any inconvenience this may cause.
If you have downloaded a file and it appears to be corrupt, it is most likely that your connection is being dropped or lost during the transfer process.
Here are a few suggestions:
1) Please make sure that your proxy server settings are correct before attempting to download again and try alternating between browsers.
2) There is download management software available that you can try at http://www.getright.com that provides the "resume" feature. Please try using this software and let us know if it has any effect on your download.
3) Please try changing the URL of the software you would like to download from
http://download.oracle.com/xxx/xxx.zip to:
a) http://download-west.oracle.com/
b) http://download-east.oracle.com/
c) http://download-uk.oracle.com/
4) Try an alternate internet browser
Regards,
OTN

Oracle 9i database download failure

I am not able to download the oracle 9i database disk 1 file i.e. 92010NT_Disk1.zip (612802971 bytes). Plz help me out.

Hi
de symcjic.dll generates problems in server with PENTIUM IV procceses.
Please, check into Metalink the Technical Note 1507946.1, maybe it´d can help yuo
good luck

Oracle 10g database download fails through IE on win98 SE

I have been trying to download oracle 10g database for windows 32-bit through IE on windows 98SE. it takes me personal detail information page when I log on with my id "kubends", when I press "continue" button on that page, URL link fails "http://www.oracle.com/webapps/dialogue/dlgpage.jsp?p_dlg_id=2788237&src=1952635&act=26&p_doc_id=2788239&p_page_id=2788241&p_dlg_response_id=-1&p_response_id=-1&p_old_response_id=-1&p_email=null&p_resp_look_back=0.0&p_title=Oracle%20Database%2010g%20downloads&p_trust_cookie=N&p_debug=N&p_omo_code=null&p_dlg_title=Oracle%20Database%2010g%20downloads&tid=262&owner=1&p_ext=Y&p_dlg_id=2788237"
Has anyone encountered this error?. Any help on this would be greatly appreciated
Thanks
Kuben

I have been trying to download oracle 10g database for windows 32-bit through IE on windows 98SE. it takes me personal detail information page when I log on with my id "kubends", when I press "continue" button on that page, URL link fails "http://www.oracle.com/webapps/dialogue/dlgpage.jsp?p_dlg_id=2788237&src=1952635&act=26&p_doc_id=2788239&p_page_id=2788241&p_dlg_response_id=-1&p_response_id=-1&p_old_response_id=-1&p_email=null&p_resp_look_back=0.0&p_title=Oracle%20Database%2010g%20downloads&p_trust_cookie=N&p_debug=N&p_omo_code=null&p_dlg_title=Oracle%20Database%2010g%20downloads&tid=262&owner=1&p_ext=Y&p_dlg_id=2788237"
Has anyone encountered this error?. Any help on this would be greatly appreciated
Thanks
Kuben

Errors during unzipping the oracle 11g database downloaded from OTN

The following errors occured during unzipping the database archive. Please help in resolving them, and also provide the copies of them for ease of substitution.
I will be very thankful to you.
database\stage\Components\oracle.javavm.containers\11.1.0.6.0\1\DataFiles\filegroup4.jar. The file is corrupt
database\stage\Components\oracle.network.client\11.1.0.6.0\1\DataFiles\filegroup23.jar. The file is corrupt
database\stage\Components\oracle.swd.jre\1.5.0.11.0\1\DataFiles\filegroup2.jar. The file is corrupt
database\stage\Components\oracle.sysman.oms.core\10.2.0.3.1\1\DataFiles\filegroup6.jar. The file is corrupt
database\stage\Components\oracle.owb.server\11.1.0.6.0\1\DataFiles\filegroup101.10.1.jar. The file is corrupt
database\stage\Components\oracle.owb.server\11.1.0.6.0\1\DataFiles\filegroup101.3.1.jar. The file is corrupt
database\stage\Components\oracle.owb.server\11.1.0.6.0\1\DataFiles\filegroup65.jar. The file is corrupt
database\stage\Components\oracle.rdbms.install.seeddb\11.1.0.6.0\1\DataFiles\Expanded\filegroup1\Seed_Database.dfb. The file is corrupt
database\stage\Components\oracle.ctx\11.1.0.6.0\1\DataFiles\filegroup18.jar. The file is corrupt

It usually better to compare the checksum of the downloaded files with the mentioned checksum over the OTN.If there is any mismatch, its unlikely that download will work. Are the byte checksums matching at both the places?
As Satish mentioned, the best approach would be to download the file again.
Aman....

Can't download Oracle 9i Database

I get "Unexpected condition. (Error Document 500)" when trying to follow like to Oracle 9i Database download page.

http://tahiti.oracle.com has all the Oracle manuals online, including the Database Administrator's Guide.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Download between Oracle 9i Database and Oracle 9i DS

I have download the files for Windows 2000.
Oracle 9i Database version 9.0.2.1
Oracle 9i DS version 9.0.2
Download Date: June 7, 2002
These from what I can tell are the lates versions on the website. I installed the database and everything went in fine. I can work with the database and everything. When I use the Universal Installer for Oracle 9i DS, I get an error when it hits 31% that states that this version of DS will not work with a database that is of version 9.0.2.1 or greater.
If anyone can help me it would be a great help,
Greg

Hi,
Your question is the answer. Oracle9i Database manages all your eBusiness data and Oracle9iAS runs all your eBusiness
applications. In a 3 tier architecture, Oracle9i Database fits in the Database tier where as Oracle9iAS fits in the middle
tier. Oracle9iAS provides an infrastructure to run different types of applications(J2EE thru OC4J, Forms applns, Portal
based applns, Wireless applns etc..)
Cheers !
-- Rajesh
Can any one brief in detail the difference between Oracle 9i database and 9ias application server.

Cannot download Oracle 9i database for NT/2K/XP - 92010NT_Disk2.zip

I could not download sucessfully file 92010NT_Disk2.zip from Oracle 9i database for NT/2000/XP. But I could download the first file (92010NT_Disk1.zip) very well. what can I do now?
Best regards

Make sure to delete the previous file before trying again. Also, there is download management software available that can help - see our FAQ at: http://otn.oracle.com/contact/htdocs/faqs#software
Regards,
OTN

Where can i download oracle 10g database express edition

Hi
can any one tell me from where i can download oracle 10g database express edition
I cannot able to find it in oracle.com
Regards,
suresh

You can try following CNET link to get Windows media: http://download.cnet.com/Oracle-Database-10g-Express-Edition/3000-10254_4-75220235.html.

Where can I download the Oracle 10g Database Installer

where can I download the Oracle 10g Database Installer. I'm unable to find a link over the Oracle site. Please help me out on this one.

981705 wrote:
where can I download the Oracle 10g Database Installer. I'm unable to find a link over the Oracle site. Please help me out on this one.As mentioned above, you need to log a SR since 10g is not longer available for download -- https://forums.oracle.com/forums/search.jspa?threadID=&q=10g+AND+Download&objID=f36&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Download Oracle 10 database?

I apologize if this is obvious to everyone but me, but where does one download the Oracle 10 database? I see the app server download but not the database.
Thanks for any help
Dave

Not yet. This is an official mail from: Oracle ST Beta Program Office [[email protected]]
Hi,
Unfortunately, we're not able to provide an actual date. The EAP software will be sent out as soon as it meets fairly strict quality levels. We intend to have it available to you in the next few weeks. An email announcement will be sent to each EAP contact as soon as we know specific details of when the CDs are being sent.
Best Regards,
ST Beta Programs Office
Joel P�rez wrote:
HiFor when the Beta version of Oracle Database10g is going to be ready ?Thanks in Advance
Joel P�rez

I need a easy Oracle Database download?

This is my first try at getting familiar with Oracle. Now the database downloads that I have experienced so far all require for me to partition my system.
Now from past experience partitioning my system has been a nightmare. I need some help!!
Is there any software from Oracle (database stuff) that I can safely download and not need to partition my system. That would be cool if someone could educate me on this subject.
I am a programmer/data person by trade and not a network person. Any help would be great.
Thank You,
Concerned Data Guy

If you want to start with Oracle, try the Express Edition aka XE.
But this is really not the right forum. The Database category of forums has e.g Installation forum and XE forum, if you decide to try XE.

Sql * plus 9 is not able to connect oracle 7 database

Today I have installed oracle 9i release 2 and found that the sql * plus provided with is unable to connect oracle database version 7. But before that we were able to connect the oracle 7 database well.
Any one having a clue on that...?
Is it a product bug...?
If so then please provide me some alternative solution clue or patch download link. Please remember in any condition currently it is not possible discard my oracle 7 database.
With Regards.
Soumen.

No, it is not a bug. You just cannot connect with Ora9i R2 SQL*Plus to an Ora7 database.You cannot create a DB link between the two database either, if you are planning on doing that.
A solution is to install Ora8 client, which can connect to both Ora9 and Ora7 database (but a db link will stil be impossible).

Oracle 9I Database, and Mobile Server install history

Dear Oracle technical representative:
This TAR started out as a true request for help in solving installation problems with Oracle 9i Release 2 Enterprise Edition, and Oracle 9i Mobile Server Release 5.0.1, but it has turned into a history of frustration with out of date, laconic, and often incorrect, and misleading documentation. As a software developer, I understand that documentation is always out of date, at least mine is. Nonetheless, I must speak my mind while understanding, and sympathizing with your situation.
I struggled through the documentation, and managed to get everything working. While I was doing that, I wrote down the step by step procedure that I used to get Database, and Mobile Server running. By sharing this rough install history with you, it is my hope that it will help prevent others from experiencing the same difficulties that I have had. It has been my observation that when a user has problems installing a trial software package they give up quickly, and do not purchase a copy. It is thus extremely important that the installation instructions, and quick start guide be accurate, attentive to detail, and well written. The first impression is the one that counts.
The Oracle 9i Lite Installation, and Configuration Guide for Windows NT shipped with Oracle 9i Lite Release 5.0.1 definitely requires, and emergency rewrite. It is terribly out of date, inaccurate, and laconic. My guess is that it is a very sloppy rewrite of poorly written 8i documentation. The Oracle 9i Database Installation Guide for Windows is somewhat better. It however should do a better job informing you that before installing onto a old server the Microsoft Foundation Class (MFC), and VC runtime libraries must be up to date. The history describes the trouble with not having the MFC42.dll at version 6. Another corker is that the default port the installer presents is 2030, and not 1521, and that leads to major confusion in the both the Database, and Mobile Server installs.
Thank you for looking at the history. I hope that it will be of use to you when you update your documentation.
Thomas G. Matney
Mississippi State University
[email protected]
(662)325-2791
TAR for Oracle 9i Release 2 Database Enterprise Edition, and Oracle Lite Release 5.0.1 Mobile Server
Installation problems are highlighted in red.
Installation sequence/history:
     1. Installed Windows NT 4.0 Server SP1 on Dell Power Edge 4300 dual x86 server to wipe the slate clean.
     2. Setup TCP/IP, and IPX/SPX networks
          Computer name YGGDRASILL
          Host name = YGGDRASILL
          Domain = CFR.MSSTATE.EDU
          Internet name = YGGDRASILL.CFR.MSSATE.EDU = 130.18.130.225
     3. Installed NT SP3, and Internet Explorer 4.01 from the NT 40 Options Pack CD as the gateway to installing MTS 2.0, and IIS 4.0.
     4. Installed MTS 2.0, and IIS 4.0 from NT 4.0 Optins Pack CD.
     5. Applied NT 4.0 SP6.
     6. Installed Internet Explorer 5.5 as a prerequisite to installing MADAC 2.6.
     7. Installed MDAC 2.6
     8. Installed Paint Shop Pro 7 for capturing error screens.
     9. As previous install errors stated that the ordinal function xxxx could not be found in MFC42.dll, the latest version (6.0.8665.0) of the dll was installed, and registered from MS VC++ SP5. Also I upgraded MSVCIRT.dll, MSVCRT.dll, MSCRT40.dll, and added MSVC60.dll from SP5 to be on the safe side.
According to the installation documents all the prerequisites for installing Oracle 9i Release 2 Database Enterprise Edition are satisfied.
     10. Began install of Oracle Database Enterprise Edition with target parameters:
          Home directory = D:\Oracle\Ora92
          Database directory = D:\Oracle\oradata
          Global database name = FIA.YGGDRASILL.CFR.MSSTATE.EDU
          Port = 2030
          SID = FIA
          SYSTEM Password = phwphw
          SYS Password = phwphw
          SCOTT Password = phwphw
          DBSNMP Password = I left this one unassigned or empty.
          tnsnames.ora entry for remote TCP/IP connection
          a. CD 1 of 3 load
               1. Error writting to MFC42u.dll. Action ignore. A check indicated that MFC42u.dll version did not match the updated version of MFC42.dll. Plan is to update after install. Unicode version of MFC is probably not used by the installer.
          b. CD 1 completed with only one problem, and CD 2 load begins.
          c. CD 2 installed without incident., and CD 3 load begins, and completes without farther problems. The only issue to address at this time is to update the MFC42u.dll.
               HTTP Server URLs
                    http://7778
                    https://4443
     12. Evaluation of install success begins.
          a. Oracle HTTP Service will not start. It is of particular interest that on installs that I do not upgrade the MFC42.dll the Oracle HTTP Service will start correctly, but during the install I get the error message Ordinal nnnn not found in MFC42.dll, and the Oracle MTS Recovery Service crashes during the install. I am caught between a rock and hard spot on this one. See the Figure 1. At the end of this document. I do not need the HTTP Server at this time but I will need it later and this issue must be resolved. It appears that it hangs during startup. I am sorry but I lost the ordinal number nnnn.
          When I try to start the HTTP server from the Programs menu. It Hangs, and does not return an error message. See Figure 2, and the included Apache Setup.txt, the install log, and the HTTPd.conf . The conf, and setup files look OK to me. What is the problem?
          b. All other services start correctly.
          c. Logged into the database as SCOTT on the server with SQL Plus using the connection information:
               FIA.CFR.MSSTATE.EDU =
               (DESCRIPTION =
               (ADDRESS_LIST =
               (ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
               (CONNECT_DATA =
               (SERVER = DEDICATED)
               (SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
          I created some tables, inserted data, and queried for the data. Everthing seems to be working correctly.
          d. Logged in remotely from my AOL account on a dial-up line using Oracle 9i Release 2 Personal Edition installed on my ThinkPad. Every thing tested out as above. I used the connection information:
               FIA.CFR.MSSTATE.EDU =
               (DESCRIPTION =
               (ADDRESS_LIST =
               (ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill.cfr.msstate.edu)(PORT = 1521))
               (CONNECT_DATA =
               (SERVER = DEDICATED)
               (SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
     13. I concluded that except for the Oracle HTTP Server Service not starting correctly, and that after updating the MFC42u.dll to VC++ SP5 level the stage is set for installing Oracle 9i Mobile Server Release 5.0.1. I copied the MFC42u.dll to the server and registered it successfully.
     14. As Visual Studio 6.0 Professional updates all of the MFC stuff, I decides to install it at this juncture, and apply SP5.
     15. Installed JDK1.3.1 required for Oracle 9i Mobile Server Release 5.0.1
At this time the prerequisites for installing Oracle 9i Mobile Server Release 5.0.1 are satisfied, and MFC, and rt are at version 6.
It is important to note that after installing MS Visual Studio Professional 6.0 SP5, the HTTP server started working. It is clear that prior to installing Oracle Database it is essential that MFC, and possibly other components are upgraded before starting an installation of Oracle. This probably only applies to old NT servers, but it should be mentioned in the installation instructions.
     16. Attempt to install Oracle Mobile Server Release 5.0.1
          a. File locations Screen
               Name: = OraLite501
               Path: = D:\OraLite501
          b. Select Mobile Server at Installation Screen
          c. Mobile Server Repository Database Information Screen
               Hostname = YGGDRASILL = hostname from tnsnames.ora
               Port = 2030 = same as Database port
                    It is troublesome that the port in tsnames.ora is 1521, and not 2030 as was specified in the database install. I will try this port on the reinstall. On the retry, it worked. The problem was that I was mislead by the default port of 2030 at the database install. The database was actually installed on port 1521, and I was not given an error message, or warning. As I am a first time installer of Oracle products this threw me for a loop. The default port for the database needs to be 1521, if regardless of what the user specifies for a port you are going to install on port 1521.
               Net Service Name = FIA.YGGDRASILL.CFR.MSSTATE.EDU = Global database name as required by installation instructions.
          d. Yes. At Do you want to install the Mobile Server Repository question.
          e. At Oracle Protocol Support, I checked the SPX box.
          f. Summary, and Install screens function to specifications.
          g. Mobile Server Repository Wizard
               Database System password:
                    Password = phwphw
          h. Mobile Server Repository Wizard
               Schema Name: fiafield
               Password : fiafield
          i. Success at last with the install part. The problem was the wrong port number. See my above comments on this problem, and how Oracle could grease the skids for the next first time installer.
     j. I could not find the httpd.conf file in the place the install instructions said it should be for running the Mobile Server in Oracle HTTP Server. Since only one copy of httpd.conf existed, I added the include D:\OraLite501\mobile\server\bin\wtgias.conf to the bottom of the file assuming that it is the correct one. I the re-booted instead of using apache -k restart. The Oracle HTTP Server started, so there is hope. The install instructions state that the httpd.conf file would most likely be in the program files directory, when they are really installed in the Oracle Lite home directory.
     k. According to the documentation the Mobile Server should start when the Oracle HTTP Server starts with the wtgias.conf file added to the httpd.conf file. It does not. If I use Process Explorer, I know that Apache loaded the wtgias.conf, because both Apache.exe processes that are running have the wtgias.dll loaded. The facts are at this stage of the game are
          1. OraMTSRecoveryService is started
          2. OracleOraHome92HTTPService is started
          3. OracleOraHome92Listener is started on port
          4. OracleServiceFIA is started
          5. Apache.exe has the wtgias.dll loaded
          6. The Moble Server is not running and it should be if the documentation is correct.
          7. If I start the Mobile Server either as a service using wtgsvc -i or with the webtogo command from the DOS prompt, the Mobile Server starts, but when I attempt to log in with the URL http://Yggdrasill:7778/webtogo/startup it inform me the Mobile Server is not started and it is. Figure 3 shows the response I receive from the login attempt.
     l. I finally ran the Mobile Server in total debug mode using the command webtogo -d0", and it gave me the subtle hint that the correct URL is
          http://Yggdrasill.cfr.msstate.edu/webtogo/startup.
     When I use the above URL and I can login to the Mobile Server with UN = fiafield, and PW = fiafield. I was confused by the documentation. I was under the assumption that the host address would be either http://Yggdrasill:7778, or http://Yggdrasill:4443. After all when I, installed Oracle Database these URLs were listed. It needs to be made clear in the installation guide for the mobile server that the Mobile Server address is http://Your servers WWW address/webtogo/startup, and the statements about the Mobile Server will start when the Oracle HTTP Server is started needs to be removed since they are incorrect. Also, the documentation should clearly state that the Schema Name, and Password given in the Repository Wizard Screen are synonymous with the username, and password for the Mobile Server login.
     m. After determning the hard way that the Mobile Server does not start when the the Oracle HTTP Server starts, and that the correct URL is http://Internet address/webtogo/startup = http://Yggdrasill.cfr.msstate.edu/webtogo/startup, I decide to start the Mobile Server as a service with the command wtgsvc -i. After I re-booted, to my surprise, I could not login to the Mobile Server. When I checked the system services, the webtogo service was running. So to give the start as a service thing a fair chance I re-booted again, but obtained the same results. I thus concluded that the Mobile Server will not run correctly as a service. As it turns out my conclusion was wrong. After waiting a few minutes, my login try was successful. The documentation should indicate that after booting it may be a minute or two before the Mobile Server service become available.
     n. After some serious problems with the installer, and the documentation everything is working. I have a green light to go on to the next stage, which is program the handheld to take advantage of the Mobile Server. I will be glad to get back to programming, and am so thankful that I am not a network administrator.
     Appendix
HTTPd.Conf (Abstract only), Apache Setup.txt,
tsnames.ora, and listener.ora.
HTTPd.conf (Abstract only)
# Based upon the NCSA server configuration files originally by Rob McCool.
# Include the Oracle configuration file for custom settings
include "D:\oracle\ora92\Apache\Apache\conf\oracle_apache.conf"
include "D:\OraLite501\mobile\server\bin\wtgias.conf "
     tsnames.ora
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora92\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
INST1_HTTP.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
EXTPROC_CONNECTION_DATA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
          listener.ora
# LISTENER.ORA Network Configuration File: D:\oracle\ora92\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\ora92)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
(ORACLE_HOME = D:\oracle\ora92)
(SID_NAME = FIA)
          Apache SetupInfo.txt
The following information is available in:
D:\oracle\ora92\Apache\Apache\setupinfo.txt
The HTTP Server can be accessed using the following URLs:
http://yggdrasill:7778
https://yggdrasill:4443

You can find information regarding enabling the iSQLPLUS in the following Oracle manual.
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14357/ch2.htm

Issue in Oracle 11g Database Change Notification for Java application

Hi,
I am trying to use Oracle's Database Change Notification in Java application.
I followed the sample application (+DBChangeNotification.java+ , Example 29-2), provided in the following link:
+[http://download.oracle.com/docs/cd/B28359_01/java.111/b31224/dbmgmnt.htm#CHDEJECF]+
I am able to see that the Registration of the SQL query is successful.
But, when I do changes to the table registered, notifications are not received in the Listener class (+DCNDemoListener.java+).
Ideally, the method DCNDemoListener.onDatabaseChangeNotification() should be invoked on any insert/update to the registered table. But this method is not getting invoked.
The execution has stopped in the following line of DBChangeNotification.java Class.
this.wait();
+==> The application was WAITing indefinitely in this line, as the NOTIFY() from DCNDemoListener.java was not executed.+
I am using VPN to connect to Oracel server. Remote Oracle Server is protected my firewall. Is this the reason for not sending the notifications from Oracle server?
The version of software used are given below:
Oracle Client - Oracle 11.1.0
JDK - 1.6
Oracle JDBC Driver - ojdbc6.jar
Can someone help me to resolve this issue?
Thanks in Advance.
Regards
Sam
Edited by: Ponsu on Apr 7, 2011 10:41 PM

Hi,
I am having similar issue. Where you able to resolve it.
I am also using the same example you were using.
I am using the following version.
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
Compatibility: 11.2.0.0.0
I do not see any notification coming back from the DB.
Appreciate your help.
Thanks & regards,
Ebe

Oracle 8i Database Download

Similar Messages

Maybe you are looking for