Oracle 8i DB creation

Hi All,
When Installing Oracle I9AS, Do I need to have an Oracle 8i installation?
Can I just configure the DB created in the I9AS installation process and access it from a client like I do with a 8i DB?
Thanks in advance,
Agustin

The Oracle9i Application Server
Installation Guide says: 'The Oracle Database Configuration Assistant creates a database that is used as a
container for Oracle 8i JVM.'
The question is if either I can use this DB as a 'regular' DB -create listener, services and connect to it using jdbc or whatever- or I have to install the Oracle 8i 8.1.7 suite.
Thanks in advance,
Agustin

Similar Messages

Oracle 10g database creation in windows2003 server

hi,
i need the step by step procedure to create oracle 10g database in windows 2003 server.
with regards
velu

asifkabirdba wrote:
http://download.oracle.com/docs/cd/B19306_01/install.102/b15681/toc.htm
Asif,
IMO, the OP wanted to have steps given to him for the database creation , not the installation of the software.Not sure though since the wording chosen by him is not very clear.
@OP,
If you are looking for the database creation steps , the best would be to use DBCA! Other than that, you may want to look at the manual way of doing the same, given over here.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/create.htm#i1017640
That said, if you were looking for the installation instructions, please look at the link given by Asif.
HTH
Aman....

Setting dpdump location during Oracle 11g DB creation with DBCA....

I'm hoping someone can point me to an init parameter or environment variable I can set to change the default location of the Data Pump DATA_PUMP_DIR directory.
I'm running Solaris 10 and KSH so I tried setting it as an environment... no luck.
export ORACLE_SID=DXA1
export ORACLE_BASE=/oracle/$ORACLE_SID
export ORACLE_HOME=$ORACLE_BASE/112_64
export DATA_PUMP_DIR=/oracle/DXA1/oratrace/dpdump
dbca -silent -createDatabase -gdbName $ORACLE_SID -templateName /group/oracle/install/11201_General_Purpose.dbc -sysPassword test1234 -systemPassword test1234
Copying database files
1% complete
Creating and starting Oracle instance
40% complete
62% complete
Completing Database Creation
66% complete
100% complete
Look at the log file "/oracle/DXA1/cfgtoollogs/dbca/DXA1/DXA1.log" for further details.
SQL> select * from dba_directories where directory_name = 'DATA_PUMP_DIR';
OWNER DIRECTORY_NAME DIRECTORY_PATH
SYS DATA_PUMP_DIR /oracle/DXA1/admin/DXA1/dpdump/
I'd prefer to set this up front so I don't have to re-configure it for each new database installation. It's not a big deal... I just want it where I want it :-)
Thanks in advance!
Regards,
Rich

Modify your template and add the following:
--- etc ---
   <Variables/>
   <CustomScripts Execute="true">
      <CustomScript script="/oracle/scripts/chg_dpdump_dir.sh"/>
   </CustomScripts>
   <InitParamAttributes>
--- etc ---Where "chg_dpdump_dir.sh" is your script to change the location of datapump dir:
#!/usr/bin/ksh
# +-------------------------------------------------
# +
# + chg_dpdump_dir.sh
# +
# + Change the Oracle datapump directory
# +
# +-------------------------------------------------
export ORACLE_SID=DXA1
export ORACLE_BASE=/oracle/$ORACLE_SID
export ORACLE_HOME=$ORACLE_BASE/112_64
export DATA_PUMP_DIR=/oracle/DXA1/oratrace/dpdump
export SYSPWD='ThePasswordYouWillEnterInDbca'
sqlplus -s /nolog <<EOF
connect sys/$SYSPWD as sysdba
Create Or Replace Directory Data_Pump_Dir As '$DATA_PUMP_DIR';
exit
EOF:p

Oracle 12c database creation perl error

Hello,
When I try to create a
database in 12c I get at the end an perl error and the database creation stops.
Can someone tell me what the problem can be?
Thanks
Willem

WillemT wrote:
Hello,
When I try to create a
database in 12c I get at the end an perl error and the database creation stops.
Can someone tell me what the problem can be?
Thanks
Willem
ERROR? What Error?
I don't see any error.
my car won't go.
Can someone tell me what the problem can be?
How do I ask a question on the forums?
https://forums.oracle.com/message/9362002#9362002

Oracle Report Server Creation in Forms11g

Dear All
I installed oracle forms 11g r2 on windows 7 sp1 64 bit, every thing is okay , forms running without any problem ,
but i don't know to to run reports and how i can create report server , can any one help me in details ?
Thanks in advanced

Hi,
how i can create report serverIn the installation did you choose the report server to be installed ?? if you choose it, you already have a a report server. In you navigator go to:
http://hostname:8090/reports/rwservlet/showjobs
The page must show you the report server's name by default :)
Regards
Carlos

Oracle BAM alert creation

Hello,
I need to create an Oracle BAM alert as follows:
My DO has fields 'EventDate' of type DateTime and 'Error' as an int. I want to be able to send out an alert if I receive more than 100 records in the past 30 minutes with a error value 2.
I have tried doing this using the Event - 'When a data field in a data object meets specified condition',
-setup Row Filter as 'Error is equal to 2', 'EventDate' is within a time interval previous 30 MINUTES'
-setup Group Filter as 'COUNT(Error) is greater than or equal to 100'
but it does not work as expected. Can anyone please let me know what I am doing wrong and if there is another way to accomplish this?
Any help would be greatly appreciated.
Thanks
Edited by: user12920523 on Apr 26, 2013 1:00 PM

Hi Experts,
Am facing same issue on IE9. Also I have applied patch provide by oracle, but didn't work. Did any one find workaround for this problem.
Thanks,
Sagar

Oracle 8i database creation

Hi,
I'm having troubles creating databases with Oracle 8i, I've tried the "dbassist" which returned : "ORA-03114: not connected to ORACLE", I've also tried using "svrmgrl" and used a standard OFA-script. Here I got :"ORA-27146: post/wait initialization failed"
followed by "ORA-03114: not connected to ORACLE"
I have Oracle 8i on a Solaris 2.6 machine and also Oracle 8.0.4.
Already great thanx to anyone who can help.

Hi!
I've got the same problem, can you tell me if you have solved this problem and how?
my e-mail: [email protected]
Thanks a lot!!
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Ronald Sterckx ([email protected]):
Hi,
I'm having troubles creating databases with Oracle 8i, I've tried the "dbassist" which returned : "ORA-03114: not connected to ORACLE", I've also tried using "svrmgrl" and used a standard OFA-script. Here I got :"ORA-27146: post/wait initialization failed"
followed by "ORA-03114: not connected to ORACLE"
I have Oracle 8i on a Solaris 2.6 machine and also Oracle 8.0.4.
Already great thanx to anyone who can help.<HR></BLOCKQUOTE>
null

Oracle standby database creation different backup location

Hi,
I am using Oracle EE 11gR2 on aix 6.2.I am tring to create a standby database.The directory structure od primary and standby database server are different.
I am taking backup (RMAN) at /u01/backup directory on primary server and shipping those backup to standby server at /u05/backup.While duplication the rman unable to locate backup pieces at Dr server as those backups are located on different location from Dc.How to over come this situation.catalog start with is not working.
Regards
DBAFORU

Hello;
Since you are on Oracle 11 one option would be duplicate from active primary. You can use the Standby parameters of DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT for the directory structure.
duplicate target database for standby from active database NOFILENAMECHECK;
How To Restore From An Old Backupset Using RMAN? (Doc ID 209214.1)
Step by Step Guide on Creating Physical Standby Using RMAN DUPLICATE...FROM ACTIVE DATABASE (Doc ID 1075908.1)
RMAN ACTIVE DUPLICATE WHEN CONNECTED TO STANDBY AS TARGET (Doc ID 1343515.1)
Creating a Physical Standby Database (Doc ID 1475344.1)
Best Regards
mseberg

Oracle Telesales-Party creation

Hi,
In telesales, We have to create Party first and Party will be converted into customer. I am facing one issue here that the application is creating the Account number directly. How to stop this.
What is the profile set up for this
Regards
R

The Oracle9i Application Server
Installation Guide says: 'The Oracle Database Configuration Assistant creates a database that is used as a
container for Oracle 8i JVM.'
The question is if either I can use this DB as a 'regular' DB -create listener, services and connect to it using jdbc or whatever- or I have to install the Oracle 8i 8.1.7 suite.
Thanks in advance,
Agustin

ORACLE NEWBIE - table creation

I currently use MySQL, but I am starting work on an application which runs on Oracle 8i. I am in the process of learning 8i, but for now I would like to work on the application in MySQL (since the API is database independant). Is there an easy way to dump the SQL table create statments from the Oracle instance (ie. is the a function equivalent to mysqldump on MySQL)?
Thanks for your help!
James Deck

Never mind... I figured it out ;-).

Oracle 12c workspace creation

Hi all!
How can I create APEX workspace referencing to local user (Oracle 12c)? APEX_040200, ANONYMOUS, XDB, APEX_PUBLIC_USER is comon users by default, but HR and so on are local. What should i do?

Hi Andrey,
To assist in resolving your issue, could you please provide some additional information in relation to your installation. As part of your 12c configuration, and with APEX 4.2 installed in your container database, how have you configured your new pluggable database (PDB) i.e. using EPG or APEX Listener or Oracle HTTP Server, as outlined in the 4.2. Installation Guide for 12c? The reason I ask is because, if you're using EPG, for example, each PDB will have a distinct port number and you'd need to ensure that the URL you're using to access the APEX Administration Services is the correct one.
My colleague, Jason Straub, has posted a number of blog postings relating to APEX and 12c, as well as a link to a chapter in the Installation Guide for 4.2 with 12c, which you might find helpful.
Regards,
Hilary

Need Help | Oracle UCM 11g | Creation of new layout

Hi All,
This is regarding the problem we are facing to create a new layout and skin. We followed all the steps that were needed to create a new layout/skin but still we are getting errors after deploying the component. Since there were major changes in 11g, we are not able to proceed with debugging as well. (part of the reason being code clean-up is not done properly and we are going to wrong files while debugging.)
Having said, I need your help/advice in solving my problem. Below are the problems I am facing once I deploy the component.
1) Even though I am mentioning that skin.css and layout.js should be published from “publish/resources…” folder, different skin.css and layout.css files were getting deployed. Not sure from where the content server is picking those files from. I am placing the skin.css and layout.css from TopMenus/Trays to continue my testing.
<tr>
<td>publish/resources/layouts/NBNTrays/layout.js</td>
<td>resources/layouts/NBNTrays/layout.js</td>
<td>TRAYS_LAYOUT_JS</td>
<td>javascript:layout:NBNTrays</td>
<td>60</td>
<td><$if isLayoutEnabled("NBNTrays") and (not DisableNBNTraysPublishing)$><$doPublish = 1$><$endif$></td>
</tr>
2) After the component gets deployed and we publish all static files, I am able to change the layout/skin to my custom layout/skin. Top menus is working fine, but in Trays layout I am not able to see the left navigation.
3) Though I am saying to copy all the images from resources/trays folder, component is copying only some subset of images from the corresponding folders.
<tr>
<td>resources/layouts/Top Menus/Oracle</td>
<td>resources/layouts/NBNTopMenus/NBNSkin</td>
<td>resources:layout:NBNTopMenus</td>
<td>70</td>
<td><$if isLayoutEnabled("NBNTopMenus") and (not DisableNBNSkinSkinPublishing) and (not DisableNBNTopMenusPublishing)$><$doPublish = 1$><$endif$></td>
<td>1</td>
</tr>
Can you please tell me how can we associate new layout.js and skin.css to the new layout/skin.
Please note that all the above problems were coming in 11g.
Thanks in advance,
Regards:
Veera

Hi All,
This is regarding the problem we are facing to create a new layout and skin. We followed all the steps that were needed to create a new layout/skin but still we are getting errors after deploying the component. Since there were major changes in 11g, we are not able to proceed with debugging as well. (part of the reason being code clean-up is not done properly and we are going to wrong files while debugging.)
Having said, I need your help/advice in solving my problem. Below are the problems I am facing once I deploy the component.
1) Even though I am mentioning that skin.css and layout.js should be published from “publish/resources…” folder, different skin.css and layout.css files were getting deployed. Not sure from where the content server is picking those files from. I am placing the skin.css and layout.css from TopMenus/Trays to continue my testing.
<tr>
<td>publish/resources/layouts/NBNTrays/layout.js</td>
<td>resources/layouts/NBNTrays/layout.js</td>
<td>TRAYS_LAYOUT_JS</td>
<td>javascript:layout:NBNTrays</td>
<td>60</td>
<td><$if isLayoutEnabled("NBNTrays") and (not DisableNBNTraysPublishing)$><$doPublish = 1$><$endif$></td>
</tr>
2) After the component gets deployed and we publish all static files, I am able to change the layout/skin to my custom layout/skin. Top menus is working fine, but in Trays layout I am not able to see the left navigation.
3) Though I am saying to copy all the images from resources/trays folder, component is copying only some subset of images from the corresponding folders.
<tr>
<td>resources/layouts/Top Menus/Oracle</td>
<td>resources/layouts/NBNTopMenus/NBNSkin</td>
<td>resources:layout:NBNTopMenus</td>
<td>70</td>
<td><$if isLayoutEnabled("NBNTopMenus") and (not DisableNBNSkinSkinPublishing) and (not DisableNBNTopMenusPublishing)$><$doPublish = 1$><$endif$></td>
<td>1</td>
</tr>
Can you please tell me how can we associate new layout.js and skin.css to the new layout/skin.
Please note that all the above problems were coming in 11g.
Thanks in advance,
Regards:
Veera

ORA-29532 on Oracle 9i custom database creation (Linux Redhat 7.2)

I'm trying to create oracle 9i on Linux Redhat 7.2 (2.4.16), but I got a ORA-29532 error:
ORA-29532: java call terminated by uncaught java exception: java.net.BindException: unable to bind end point, status=12571<0.0.0.0,2481>
This error was thrown on Oracle JVM database creation process.

I'm trying to create oracle 9i on Linux Redhat 7.2 (2.4.16), but I got a ORA-29532 error:
ORA-29532: java call terminated by uncaught java exception: java.net.BindException: unable to bind end point, status=12571<0.0.0.0,2481>
This error was thrown on Oracle JVM database creation process.

Install of Oracle 10g on RHEL 4 AS (newbie)

This is one the toughest installs I've ever done. I'm new to Oracle so bear with me. I'm trying to install Oracle 10g on a RHEL 4 AS system. I started out installig on a RHEL 5 sever but felt that I might be in over my head since it wasn't certified for RHEL 5.
I've successfully installed Oracle 10g on a RHEL 4 AS machine. During my installation I used the "Advanced & Custom" install. I selected this option to install software only. I wanted to learn the implmentation of Oracle and the creation of databases. I'm now trying to start the Oracle/DBMS service and the listener. I've been tyring to get isqlplus to work via the Mozilla browser but I've not been able to login. I enter in the following url "http://oracleserver:5561/isqlplus". I receive the logon screen asking for a usename and password. I don't recall entering in a username other than the default of "dba" and a password. Is this what I should be using on this screen? I'm also being asked to enter in a "Connect Identifier" what does this mean. I don't recall entering in a "Connect Identifier" as part of the installation? When I enter in the "dba" username and password I get the following message:
ERROR - ORA-12162: TNS:net service name is incorrectly specified
What does this mean and what should I be entering?
I was successful at getting the listener to start.
I'm I having problems becuase of my installation process of "Advance, Custom, Software Only". My expectations where that a template database would be created and I would be able to use a GUI interface going forward to configure the system. Very much what you would see when installing SQL 2005 in a Windows environment.
Please work with me to get things working. I really want to learn this.
Thanks

When you perform the install software only, it means so, Software Only. So no database template, no default environment. You'll have to define this on your own. It could be by means of dbca or manually.
isqlplus could start, but it doesn't have any database to connect to. The username/password and database service you are being prompted are the connect descriptor to an existing database and a database user/password. At this time none of them exist.
I could tell you, you are doing well, your listener and isqlplus are properly working, so next step, create your database.
As stated above, just issue the dbca command from the os prompt and go through the assistant.
~ Madrid.

Ora-12154 after creation of second database

DB 10g ver 10.1.0.2.0
OS Windows server 2003 32bit +sp1
Summary:
Due to the addition of extra storage to the server I decided to rebuild from scratch, and all was working correctly until I came to create a second database on the server, once this is created I get ORA-12154 errors at logon for both databases.
Full:
Installation of Windows and Oracle are fine, creation of the first database also works correctly and connection is without problems e.g sqlplus user/pass@database1 allows me to logon.
On creation of the second database the same command: sqlplus user/pass@database1 or sqlplus user/pass@database2 gives me an ORA-12154 error.
If in the command prompt window I set ORACLE_SID=database1 then try sqlplus user/pass it connects without problems, the same for database2, although sqlplus user/pass@database1 still fails.
I have checked tnsnames.ora, all looks fine, I used the net configuration assistant to generate the entries and used the connection test to verfiy all was ok, both connection tests worked fine.
I can tnsping both database1 and database2 and lsnrctl status shows
Service "database1" has 1 instance(s).
Instance "database1", status READY, has 1 handler(s) for this service...
Service "database1XDB" has 1 instance(s).
Instance "database1", status READY, has 1 handler(s) for this service...
Service "database2" has 1 instance(s).
Instance "database2", status READY, has 1 handler(s) for this service...
Service "database2XDB" has 1 instance(s).
Instance "database2", status READY, has 1 handler(s) for this service...
I have searched through back posts and the web and as yet have not been able to find how to resolve this. Any pointers or ideas as to why I cannot use the sqlplus user/pass@database to connect?
TIA
Will
.

Hi,
Thanks for the quick reply, I created the listener using the net configuration assistant, I assumed this would add all necessary configuration entries?
I have added an extra section as suggested to the listener.ora, it now reads
# listener.ora Network Configuration File: c:\oracle\product\10.1.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
     (GLOBAL_DBNAME = dm)
     (ORACLE_HOME = c:\oracle\product\10.1.0\db_1)
     (SID_NAME = dm)
    (SID_DESC =
     (GLOBAL_DBNAME = medline)
     (ORACLE_HOME = c:\oracle\product\10.1.0\db_1)
     (SID_NAME = medline)
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = c:\oracle\product\10.1.0\db_1)
      (PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = well-mccarthy02)(PORT = 1521))
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
)Is this correct, I have bounced the listener and still get ora-12154 errors on connection.
running lsnrctl services gives:
LSNRCTL for 32-bit Windows: Version 10.1.0.2.0 - Production on 21-FEB-2006 13:28
:10
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=well-mccarthy02)(PORT=15
21)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0
         LOCAL SERVER
Service "dm" has 2 instance(s).
Instance "dm", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:1 refused:0
         LOCAL SERVER
Instance "dm", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER
Service "dmXDB" has 1 instance(s).
Instance "dm", status READY, has 1 handler(s) for this service...
    Handler(s):
      "D000" established:0 refused:0 current:0 max:1002 state:ready
         DISPATCHER <machine: WELL-MCCARTHY02, pid: 1680>
         (ADDRESS=(PROTOCOL=tcp)(HOST=well-mccarthy02)(PORT=1505))
Service "medline" has 2 instance(s).
Instance "medline", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0
         LOCAL SERVER
Instance "medline", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:1 refused:0 state:ready
         LOCAL SERVER
Service "medlineXDB" has 1 instance(s).
Instance "medline", status READY, has 1 handler(s) for this service...
    Handler(s):
      "D000" established:0 refused:0 current:0 max:1002 state:ready
         DISPATCHER <machine: WELL-MCCARTHY02, pid: 2804>
         (ADDRESS=(PROTOCOL=tcp)(HOST=well-mccarthy02)(PORT=1677))
The command completed successfullywith the original listener.ora file lsnrctl services gave
LSNRCTL for 32-bit Windows: Version 10.1.0.2.0 - Production on 21-FEB-2006 13:36
:13
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=well-mccarthy02)(PORT=15
21)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0
         LOCAL SERVER
Service "dm" has 1 instance(s).
Instance "dm", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER
Service "dmXDB" has 1 instance(s).
Instance "dm", status READY, has 1 handler(s) for this service...
    Handler(s):
      "D000" established:0 refused:0 current:0 max:1002 state:ready
         DISPATCHER <machine: WELL-MCCARTHY02, pid: 1680>
         (ADDRESS=(PROTOCOL=tcp)(HOST=well-mccarthy02)(PORT=1505))
Service "medline" has 1 instance(s).
Instance "medline", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER
Service "medlineXDB" has 1 instance(s).
Instance "medline", status READY, has 1 handler(s) for this service...
    Handler(s):
      "D000" established:0 refused:0 current:0 max:1002 state:ready
         DISPATCHER <machine: WELL-MCCARTHY02, pid: 2804>
         (ADDRESS=(PROTOCOL=tcp)(HOST=well-mccarthy02)(PORT=1677))
The command completed successfully

Oracle 8i DB creation

Similar Messages

Maybe you are looking for