Oracle 8i EE Solaris 7 install problem

Install 8i(8.1.7) with minimal(or typical) option. Everything went fine until it stalled at step "initializing database" during creating a startup db, with error message "ORA-03114, not connected to Oracle". I ignored it, and then it comes with another error "ORA-27101: shared memory realm does not exist". Anyway, database creation fails.
I have searched the newgroups and found a few similar messages but no formal answers
were found. By the way, I applied all OS patches and made sure pre-install setup. Strangely, I did the same install on the machine with Oracle 8.1.5 without problem.
Any idea ? Thanks
null

seems which the PROCESSES parameter of init.ora changed in 815 -> 817 from 50 to 150
so the kernel parameters in /etc/system cannot be suficient large to startup the database, I has the same problem and increasing the parameters which affect the PROCESSES in init.ora, solved it
null

Similar Messages

Oracle 8.1.6 install problem

Hello!
When I run ./runInstaller
Window appear and then jre hangs.
If I try another jre- blackdown 1.1.8v1
runInstaller froze, i.e. no any window
appear.
What to do?
RedHat 6.2
null

I find cause of error:
I export LC_ALL=C
and LANG=C and installer starts.
Now I have another problem:
after installing jre oracle says:
Error setting permisissions
of file/directory
/ora8/product/jre/1.1.8/LICENSE
and then, if I skip install of JRE
I have no NET8 configuration
and database creation :(

Oracle FOD Storefront demo install problem

I"m using Jdev Studio V 11.1.1.4.0 and I downloaded PS3 (build 5923) demo version. Firstly, do I have the right demo version for my Jdev?
Second, I am not able to install this. My build.properties looks like this:
# Master Ant properties file for Fusion Order Demo
# All build files refer to this master list of properties
# Continuous builds override these settings
# $Id: build.properties 812 2007-02-20 07:14:33Z lmunsing $
# Base Directory for library lookup
jdeveloper.home=C:/JdevInstall
src.home=..//..
# JDBC info used to create Schema
jdbc.driver=oracle.jdbc.OracleDriver
jdbc.urlBase=jdbc:oracle:thin:@<dbserver_internal_ip>
jdbc.port=1521
jdbc.sid=orclDW
# Information about the default setup for the demo user.
db.adminUser=SYSTEM
db.demoUser=FOD
db.demoUser.password=<SYSPASS>
db.demoUser.tablespace=USERS
db.demoUser.tempTablespace=TEMP
when I try to run build.xml, I get the the following errors
Buildfile: C:\fusiondemox\PS3_tag2\Infrastructure\Ant\build.xml
init:
[javac] Compiling 1 source file to C:\fusiondemox\PS3_tag2\Infrastructure\Ant\classes
setProperties:
createDatabase:
refreshSchema:
BUILD FAILED
C:\fusiondemox\PS3_tag2\Infrastructure\Ant\build.xml:51: The following error occurred while executing this line:
C:\fusiondemox\PS3_tag2\Infrastructure\DBSchema\build.xml:91: The following error occurred while executing this line:
C:\fusiondemox\PS3_tag2\Infrastructure\DBSchema\build.xml:56: The following error occurred while executing this line:
C:\fusiondemox\PS3_tag2\Infrastructure\DBSchema\build.xml:28: C:\wlserver_10.3\server\lib not found.
Total time: 8 seconds
I searched the forum and I noticed a couple of similar issues where the build cannot find the server lib. I have tried some of the suggestions like changing the direction of the backslash '/', but thiese errors persist.
Also the second error (91) refers to 'arg2="${db.demoUser.password}"/>' in the build.xml, which is the demo user PW specified in the build.properties. So I don't understand why this would create an error since this PW is already specified. Also these errors are still the same whether I enter the correct admin password or an incorrect admin password.
Any advice is greatly appreciated. Thanks, J

Try:
jdeveloper.home=C:/JdevInstall/jdeveloper
John

Solaris install problems on Ultra10/300

Hi all.
I'm having a bit of an issue installing Solaris 9 on my Ultra 10. I issue the boot cdrom command, the solaris installer starts at openprom, then gives what looks to be a kernel dump, and the system reboots. I've had this issue on an Ultra 30 as well, and haven't any idea how to get around it. I have Solaris 10 (I think Sun is calling it Solaris Express) installed on the Ultra 10 now, although, at first, it gave me the same errors.
Any thoughts or ideas would be welcome,
Thanks,
Nick

issue the boot cdrom command, the
solaris installer starts at openprom, then gives what
looks to be a kernel dump, and the system reboots.Can you paste the error here?
Thanks,
Daryl

LC Solaris Install Problems

The installer, (InstallShield) does not Initialize correctly. When I run the command ./solaris_livecycle8_setup.bin with no options, The first install screen (unpacking and initializing) does not stop, the Second page loads, the Next and Cancel commands do not function.
If I use -cp:p ./suite.jar -cp:p ./stage.jar the Main screen loads mostly but again can not move forward or cancel.
The install log shows many java class not found exceptions relating to the InstallShield.
System Info:
Solaris 10 (zoned)
Java 1.5.0_14 64/32 (tried both)
32G Ram
> 30 Gb drive space available
Log File:
Apr 1, 2009 11:54:57 AM), Install, com.installshield.wizard.swing.SwingWizardUI, wrn, skipping bean Wizard Bean
Place Holder (include_startupbean) because it could not be loaded
(Apr 1, 2009 11:54:57 AM), Install, com.installshield.wizard.swing.SwingWizardUI, dbg, The wizard bean "include_
startupbean" could not be loaded because the following exception occurred:
com.jxml.quick.QPE: java.lang.ClassNotFoundException: com.adobe.installshieldx.wizard.IncludeCustomCmd
(Apr 1, 2009 11:54:57 AM), Install, com.installshield.wizard.swing.SwingWizardUI, wrn, skipping bean Wizard Bean
Place Holder (suiteKillSplashScreen) because it could not be loaded
(Apr 1, 2009 11:54:57 AM), Install, com.installshield.wizard.swing.SwingWizardUI, dbg, The wizard bean "suiteKil
lSplashScreen" could not be loaded because the following exception occurred:
com.jxml.quick.QPE: java.lang.ClassNotFoundException: com.adobe.installshieldx.wrapper.wizard.KillSplashScreen
(Apr 1, 2009 11:54:58 AM), Install, com.installshield.wizard.swing.SwingWizardUI, wrn, skipping bean Wizard Bean
Place Holder (suiteSetupOSType) because it could not be loaded
(Apr 1, 2009 11:54:58 AM), Install, com.installshield.wizard.swing.SwingWizardUI, dbg, The wizard bean "suiteSet
upOSType" could not be loaded because the following exception occurred:
com.jxml.quick.QPE: java.lang.ClassNotFoundException: com.adobe.installshieldx.wizard.SetupOSType
(Apr 1, 2009 11:54:58 AM), Install, com.installshield.wizard.swing.SwingWizardUI, wrn, skipping bean Wizard Bean
Place Holder (suiteSetOSOn) because it could not be loaded
(Apr 1, 2009 11:54:58 AM), Install, com.installshield.wizard.swing.SwingWizardUI, dbg, The wizard bean "suiteSet
OSOn" could not be loaded because the following exception occurred:........

issue the boot cdrom command, the
solaris installer starts at openprom, then gives what
looks to be a kernel dump, and the system reboots.Can you paste the error here?
Thanks,
Daryl

Oracle 9i personal ed install problem

I have downloaded and unzipped the files for this program. However, when I go to run setup, it does nothing. Help, I need this for class!
-Jessica

put the unzipped disks in a separate folder ie 92010NT_Disk1
92010NT_Disk2
92010NT_Disk3
all in one folder then find autorun folder in disk 1 and run autorun.exe
it is very complicated to setup but I did enterprise manager selection and then enabled my self as dba in manager console once it is installed.
you can log on as
name: system
pswd: manager as sysdba
type out the 'manager as sysdba' in pswd area

Error while installing Oracle 10g on Solaris 10.

Hi all,
I am trying to install Oracle 10g on Solaris 10 (x86). I did every thing that is given in the Installation manual
created user,group and directories. set all the env variables.
executing the runinstaller it throws error
error in writing to directory /tmp/OraInstall2009-04-06_07-14-09PM.please ensure that this directory is writable and has atleast 69MB of disk space.Installation Cannot continue.+
*:Error 0*
I have given recursive a+rwx permission to /tmp folder and /tmp has 3.2 GB free space. am i missing some thing??
I am very new to Solaris and Oracle;Please help me with this.
Thanks.
Regards
Akhilesh Bhale

Check also if the t-bit is set:
[root@vtl1g121 ~]# ls -dl /tmp
drwxrwxrwt 11 root root 4096 Apr 10 11:44 /tmp
This is needed to mark the filesystem/directory as temporary.
Sometimes this can cause such problems also
Command: chmod +t /tmp

Installing Oracle 8i in Solaris Intel Version With Pentium 4

Hi Guys,
I am trying to Install Oracle 8i under Solaris 8 Intel version with Pentium 4 processor fixed.But iam'nt able to continue after I click "Install" button,the runInstaller exited badly with no response.I was told that even Installing Oracle under Windows P4 is facing the same problem,but on searching I got solution by renaming a DDL file before starting installation.Is there any similar method to do for installing it under p4 processor on solaris intel 8 version.

Dear Mr. Kumar, i am chandrasekaran from singapore, actualy i need your help regarding the intel sun os oracle. I have Intel Based SUN OS, but i try to get Oracle CD Any version either 8i or 9i for intel sun os.
One of my friend have the cd but it already damaged so that i need your help.
My address
S.Chandrasekaran, Blk 84 #07-93, Commonwealth close, Singapore 140084. If you have the cd you make one copy for me and send by post. Thank you
My email id: [email protected] or yahoo.com
by chandran.s

ORA-27102: out of memory. Faild to install oracle 10gR2 on Solaris 10

Hi, I want to install oracle on my solaris machine. I have 2.5G RAM and more than 5G swap file. But the ORA-27102: out of memory error occurred at installing the Oracle Database Configuration Assistant step(Copying database files Creating and starting Oracle instance).
The only warnings bellow:
Checking kernel parameters
Checking for BIT_SIZE=64; found BIT_SIZE=64. Passed
Checking for shmsys:shminfo_shmmax=4294967295; found no entry. Failed <<<<
Checking for shmsys:shminfo_shmmni=100; found no entry. Failed <<<<
Checking for semsys:seminfo_semmni=100; found no entry. Failed <<<<
Checking for semsys:seminfo_semmsl=256; found no entry. Failed <<<<
Check complete. The overall result of this check is: Failed <<<<
Problem: The kernel parameters do not meet the minimum requirements (see above).
What's the reason and how may I resolve it?
Thanks!

I set some kernel parameters like: set shmsys:shminfo_shmmax=4294967295 and so on. Restart the computer and run dbca+ and configure in advance mode. There's a stage require the size of flash_recover_segment of which the default size number is 2048M. WOW, out of memory on my pc of course.
So I think it's the parameter value during the installation progress bring on the ORA-27102 problem. However, during the first installation, there's no prompt for me to enter the parameter; or I didn't see.

Install Oracle 8i on solaris

Hi
I know that we can install Oracle 8i on Solaris 8.
Can we install oracle 8i on Solaris 10 ?
What is the last solaris version that supports installation of Oracle 8i?
Thanx

Metalink Certification Matrix shows that Solaris 9 was the last one.
HTH
RK

Installing Problem: Oracle 8.0.5.1 on Redhat 6.0

Hello All,
I'm an oracle and LINUX Newbi.
I have been trying to install Oracle 8.0.5.1 on Redhat 6.0
and when I try to run any of the executable the application
core dumps.
I have tried all the fixes in the newsgroup..
ie,manually copying $ORACLE_HOME\bin files, compat fix from
redhat ...etc.. and have NOT made any progress!!
Can somebody please writeup a "detailed HOWTO" to do
a clean installation for Redhat 6.0??
I'm almost on the verge of switching over to NT because
of the problems..
Any help will be greatly appreciated,
regards,
abhi
null

have set up Oracle using the patch putup by Oracle
Everyting dseems to be working ok...
Thanks All for help
-abhi
Kumar Srinivas (guest) wrote:
: The problem is with EGCS and its libraries!
: If possible, load Redhat 5.2 and install ORACLE -
: it installs flawlessly.
: Funnily, you can then run ORACLE on 6.0 without any
: problems!
: I am running it on Caldera 2.2 with ORACLE 8.0.5
: (installed from Redhat 5.2 partition and mounted on the
: new kernel)
: Good luck.
: Vittorio Turchetti (guest) wrote:
: : Please see the reply by Alan Mullet to a similar question.
: : There is a known problem with RedHat 6.0 new libraries.
: : Best regards,
: : Vittorio
: : P.S. Please do not say "NT" again!
: : Abhijit Arunachalam (guest) wrote:
: : : Hello All,
: : : I'm an oracle and LINUX Newbi.
: : : I have been trying to install Oracle 8.0.5.1 on Redhat 6.0
: : : and when I try to run any of the executable the
application
: : : core dumps.
: : : I have tried all the fixes in the newsgroup..
: : : ie,manually copying $ORACLE_HOME\bin files, compat fix from
: : : redhat ...etc.. and have NOT made any progress!!
: : : Can somebody please writeup a "detailed HOWTO" to do
: : : a clean installation for Redhat 6.0??
: : : I'm almost on the verge of switching over to NT because
: : : of the problems..
: : : Any help will be greatly appreciated,
: : : regards,
: : : abhi
null

Installing 11gr2 on solaris 11 (problem with packages)

Hi All
I am installing oracle 11gr2 on solaris 11 x86.
During installation I find some packages were missing.
Our server is not connected to internet.
I search internet but not found where to download the packages. Please help. thanks.
Regards,
Ankit

downloaded solaris 11 also contains a directory which have all the packages....
pkgadd -d . SUNWarc SUNWlibms SUNWtoo SUNWi1cs SUNWi15cs SUNWxwfnt SUNWxwplt SUNWmfrun SUNWxwplr SUNWxwdv SUNWgcc SUNWbtool \
SUNWi1of SUNWhea SUNWlibm SUNWsprot SUNWuiu8 SUNWpool SUNWpoolr
search for any of the file from above in downloaded solaris 11 and you will get directory of packages.
Edited by: Niket Kumar on Oct 5, 2012 3:19 AM

Oracle 10g in Solaris Problem

Hi Guys , i was wondering how to start oracle database in correct way in Solaris
Because i had a problem with it..
i start the Oracle 10 in Solaris ,
the database is up. then after few hours, it shut down / the database is down for no reason then i have to start again
I was wondering whether there is a timeout? if there is how do i check it?
below as my step to start the database.
1. go to Oracle_HOME/bin
2. type lsnrctl start
3. sqlplus /nolog
4. connect username/password as sysdba
5. startup
any better way to start it??
after step 5, it shows no error and the database is ready.
i can connect using sql plus and toad from other computer.
But after few hours , it shutdown for no reason again..
anyone can help me?
is there any better way to start the database??
can i use nohup command in solaris to start oracle? how to do that?
Because of that , after my database starts , my web applicaton always hit
java.sql.SQLException ioException Broken Pipe then i have to restart my app server...
i heard broken pipe happens because the database is down without telling the app server is it??
Thanks...

All Seems okay...
do u know the keyword is there is an exception..
Below is my alert_SID.log
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
processes = 150
sga_max_size = 2097152000
__shared_pool_size = 134217728
__large_pool_size = 16777216
__java_pool_size = 16777216
__streams_pool_size = 0
sga_target = 620756992
control_files = /oracle/product/10.2.0/oradata/ILSDB/control01.ctl, /oracle/product/10.2.0/oradata/ILSDB/control02.ctl, /oracle/product/10.2.0/o
radata/ILSDB/control03.ctl
db_block_size = 8192
__db_cache_size = 436207616
compatible = 10.2.0.1.0
db_file_multiblock_read_count= 16
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=ILSDBXDB)
job_queue_processes = 10
background_dump_dest = /oracle/product/10.2.0/admin/ILSDB/bdump
user_dump_dest = /oracle/product/10.2.0/admin/ILSDB/udump
core_dump_dest = /oracle/product/10.2.0/admin/ILSDB/cdump
audit_file_dest = /oracle/product/10.2.0/admin/ILSDB/adump
db_name = ILSDB
open_cursors = 300
pga_aggregate_target = 203423744
awrflush_threshold_metrics= TRUE
PMON started with pid=2, OS id=755
PSP0 started with pid=3, OS id=758
MMAN started with pid=4, OS id=760
DBW0 started with pid=5, OS id=762
LGWR started with pid=6, OS id=764
CKPT started with pid=7, OS id=766
SMON started with pid=8, OS id=768
RECO started with pid=9, OS id=770
CJQ0 started with pid=10, OS id=772
MMON started with pid=11, OS id=774
MMNL started with pid=12, OS id=776
Thu Jul 20 15:46:26 2006
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
Thu Jul 20 15:46:26 2006
DISM started, OS id=783
Thu Jul 20 15:46:27 2006
ALTER DATABASE MOUNT
Thu Jul 20 15:46:33 2006
Setting recovery target incarnation to 2
Thu Jul 20 15:46:33 2006
Successful mount of redo thread 1, with mount id 1643325139
Thu Jul 20 15:46:33 2006
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Thu Jul 20 15:46:33 2006
ALTER DATABASE OPEN
Thu Jul 20 15:46:34 2006
Beginning crash recovery of 1 threads
parallel recovery started with 2 processes
Thu Jul 20 15:46:34 2006
Started redo scan
Thu Jul 20 15:46:35 2006
Completed redo scan
273 redo blocks read, 87 data blocks need recovery
Thu Jul 20 15:46:35 2006
Started redo application at
Thread 1: logseq 258, block 6373
Thu Jul 20 15:46:35 2006
Recovery of Online Redo Log: Thread 1 Group 2 Seq 258 Reading mem 0
Mem# 0 errs 0: /oracle/product/10.2.0/oradata/ILSDB/redo02.log
Thu Jul 20 15:46:35 2006
Completed redo application
Thu Jul 20 15:46:37 2006
Completed crash recovery at
Thread 1: logseq 258, block 6646, scn 66574356
87 data blocks read, 87 data blocks written, 273 redo blocks read
Thu Jul 20 15:46:38 2006
Thread 1 advanced to log sequence 259
Thread 1 opened at log sequence 259
Current log# 3 seq# 259 mem# 0: /oracle/product/10.2.0/oradata/ILSDB/redo03.log
Successful open of redo thread 1
Thu Jul 20 15:46:39 2006
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Thu Jul 20 15:46:39 2006
SMON: enabling cache recovery
Thu Jul 20 15:46:40 2006
Successfully onlined Undo Tablespace 1.
Thu Jul 20 15:46:40 2006
SMON: enabling tx recovery
Thu Jul 20 15:46:40 2006
Database Characterset is WE8ISO8859P1
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=18, OS id=1108
Thu Jul 20 15:46:46 2006
Completed: ALTER DATABASE OPEN
Thu Jul 20 15:53:52 2006
Memory Notification: Library Cache Object loaded into SGA
Heap size 2171K exceeds notification threshold (2048K)
KGL object name :select object_name from all_objects where object_name='TOAD_PROFILER' and object_type='PACKAGE'
Thu Jul 20 17:45:24 2006
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as /oracle/product/10.2.0/dbs/arch
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Could it be possible because my tablespace running out of space
because i just check that the tablespace is fully utilized...
If i delete large data from the table and commit.
Will the tablespace free the memory??
If not , how do it free up the tablespace memory rather than increasing it??

Solaris 8 Install Problem - Partition(s)

First, I am a relative "newbie" when it comes to SUN Solaris and System Adminstration, though I know enough UNIX to be dangerous (read "get me into trouble" - hahaha).
I tried to do an "upgrade" to the O/S (2.7) on my Ultra 5, but when doing an "initial install", the system will only allow me to set the partitions/slices manually at the cylinder level. Any attempts to do so have failed, as I keep getting an "overlapping cylinder" error message, regardless of how I try to setup root, /usr, etc. The Solaris 8 O/S setup swap as follows:
Starting - 3275 Size - 1110
FYI, I was trying to do the install using the Solaris 8 CDROM, Solaris build date 2/02.
Overall, I appear to be having a lot of issues with the Seagate Medalist ST34321A (4.1 Gbyte) drive that came with my Sun Ultra 5. The drive appears to work correctly, but an attempts to "wipe out" the drive (reformat) have not met with success.
Any suggestions anyone can provide regarding the install problem would be appreciated.

If you are trying to Upgrade to Sol 8 it is strongly suggested that you do not use the Installation CD. Use CD 1 of 2 with a boot cdrom. You will have to answer the sysid questions and then should get prompted for Initial Install or Upgrade. If you do not get the Upgrade prompt then there is a problem with your original Sol 7 system. Things like nfs mounts in vfstab, links to /var/sadm/patch, pkg or install/contents.
An Upgrade should not be asking you to lay out filesystems. It should use your existing ones.

Solaris 10 install problem (requested image to big to fit into memory)

I have just downloaded the iso images and burned to disk. When I go to install I get the message (Requested image to big to fit into memory Error 28) I have 1.5GB so I don't understand the problem. Thanks in advance
It took a long time for me to figure out, but the answer is disable in BIOS memory hole at 15M to 16M. This solved the install problem with Open Solaris and quite a few more such as not being able to install Linux Zenwalk 5.0 or openSUSE 10.3. Their are others also problems I have had with Linux or UNIX that this took care of. JGZ
Edited by: jgz on Mar 8, 2008 9:13 PM

Hi,
I had been able to solve the Error 28 issue that in my case was really related to a corrupted boot image:
1. I went in the path /a/platform/i86pc
2. rm boot_archive.
3. sync
4. reboot
At this point the OS will notice the absence of the boot_image and it will regenerate it.
At the time of this operation the CD with solaris 10 was inserted in the CDROM.
When the system restarted it was able to load the OS properly.
Please use these information at your own risk. I do not accept any liablity.
Cheers

Oracle 8i EE Solaris 7 install problem

Similar Messages

Maybe you are looking for