ORACLE 8I Installation in Red Hat 6.0

Two questions about the installation:
1. How do I set up the Kernel parameters such as SHMMAX, SEMMNI in the RedHat Linux 6.0? This is the first requirement in ORACLE 8I installation.
2. How do I mount the CD? When I use mount /dev/cdrom /mnt/cdrom to mount the CD,
all the filenames are in upper case.

I would suggest checking out the RedHat site as they have several whitepapers/HOWTO's that will step you through rebuilding your kernel. Search on "Custom Kernel".
As far as the files names showing up in all caps....I have not seen this before and off the top of my head I'm not sure what could cause this problem. Good luck!

Similar Messages

Oracle 9i installation on Red Hat Linux 9 URGENT

hi,
I live in london, I have tried a lot to install Oracle 9i Enterprise edition on Red Hat Linux 9, but couldn't do it, can any one help me to install it, I am ready to pay and visit any place in london for that purpose in the evening, if any one can help my mobiel number 07832 077672
best regards
asif

If you are only trying to learn, I would recommend either Fedora FC4 or OpenSuSE 10, and I would recommend installing ORacle Express Edition if you do not need advanced Oracle stuff (or you are not learning for OCP).
Again, use Werner's excellent site - http://www.puschitz.com or Ivan Kartik's site - http://ivan.kartik.sk/oracle/install_ora9_fedora.html to get good instruciton on installation.
If you want a free version that is as close to a supported Linux as legally possible, consider using WhiteBoxLinux.org, TaoLinux.org or CentOS.org linux. These are clones of RedHat Enterprise (the one that is supported). Or you could contact Novell.com and ask for an evaluation kit for SLES9.

Oracle 10g Installation on Red Hat Linux

Hi
I am trying to install Oracle 10g (Downloaded from Oracle Site) in a Linux Installation. I have checked with the following command about the Linux Version
# cat /etc/issue and the output is :
Red Hat Linux Release 7.1 (Seawolf)
Kernel 2.4.2-2 on an i686
Then I am giving #uname -r and the output is
2.4.2-2
Now Oracle Installation Guide for 10g for Linux is saying that
if the errata level is less than 25 on x86 system then install latest Kernel Updates.
Please Let me know from where I can get the Latest Kernel Updates appropriately and what I need to do to put that patch into Linux so that I can smoothly install the Oracle 10g.
Thanks and regards.
Keshav Tripathy

Jer is absolutely right.... just changing the values in oraparm.ini to reflect your kernel distribution will work for you.
For example the file contains:
[Certified Versions]
Linux=redhat-2.1,UnitedLinux-1.0,redhat-3
now to add your linux into it just check your version by issuing the command #uname -r
in my case the output was "2.4.20-8smp". I just appended redhat before this value and entered in the oraparm.ini file.
The new ini file looks like:
[Certified Versions]
Linux=redhat-2.1,UnitedLinux-1.0,redhat-3,redhat-2.4.20-8smp
[Linux-redhat-2.4.20-8smp-optional]
TEMP_SPACE=80
SWAP_SPACE=150
MIN_DISPLAY_COLORS=256
Now you are all set to install. I assume that all other pre-requisites have been fulfilled.
Thanks & Regards,
Rajesh Kumar
Team Lead UNIX

Oracle 10GR2 Installation Error Red Hat EL4

Hello,
I'm currently installing Oracle 10GR2 on Red Hat EL 4 and I get an error when
i'm 62% (Oracle Net Required Support Files 10.2.0.1.0). The error is the following:
Error in invoking target 'ntcontab.o' of makefile '/u01/app/oracle/product/10.2.0
/db_1/network/lib/ins_net_client.mk'.
When I look the make.log file it shows this:
/usr/bin/make -f ins_net_client.mk mkldflags ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1//usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1/rm -f ntcontab.*
(if [ "compile" = "compile" ] ; then \
/u01/app/oracle/product/10.2.0/db_1/bin/gennttab > ntcontab.c ;\
/usr/bin/gcc -c ntcontab.c ;\
rm -f /u01/app/oracle/product/10.2.0/db_1/lib/ntcontab.o ;\
mv ntcontab.o /u01/app/oracle/product/10.2.0/db_1/lib/ ;\
/usr/bin/ar rv /u01/app/oracle/product/10.2.0/db_1/lib/libn10.a /u01/app/oracle/product/10.2.0/db_1/lib/ntcontab.o ; fi)
gcc: installation problem, cannot exec `cc1': No such file or directory
mv: cannot stat `ntcontab.o': No such file or directory
/usr/bin/ar: /u01/app/oracle/product/10.2.0/db_1/lib/ntcontab.o: No such file or directory
make: *** [ntcontab.o] Error 1
My version of the gcc is 3.4.5-2

read the oracle installation manual and install all recomended RPM then problem will resolved. binunit rpm is also required.
i had got this problem and resolved by installing recomended rpms.

Oracle 8i installation with Red Hat Linux 6.2

Hi
Please help us in solving the below mentioned problem.
We are trying to install Oracle 8.1.7 under Linux 6.2 . During the installation the following error displays and could not able to finish the instllation. The problem is
Error in invoking target ntcontab.o of makefile /usr/local/u01/app/oracle/product/8.1.7/network/lib/ins_net_client.mk
If any has a soln for this please reply to us. Thanks in advance
regards
Santhosh
null

Miguel Tsuboyama (guest) wrote:
: Pinwu Xu (guest) wrote:
: : Terry (guest) wrote:
: : : Hi,
: : : I am still stuck on DISPLAY error.
: : : The messages I get when I issue ./runInstaller command are:
: : : Initailizing Java Virtual Machine from
: /usr/local/jre/bin/jre
: : : Please wait...
: : : Xlib: connection to "QIS:0.0" refused by server
: : : Xlib: Invalid MIT-MAGIC-COOKIE-1 KEY
: : : Java.lang.Internal Error: can't connect to X11 window
server
: : : using 'QIS:0.0' as the value of the DISPLAY variable
: : : QIS is the server name that I am installing Oracle to.
: : : The manual says I should set it to
: : : DISPLAY=work_station_name:0.0
: : : export DISPLAY
: : The work_station_name is the name of the machine the monitor
: : you are facing to connects to, with X Window running. If
: : you have only one machine, simply typing
: : export DISPLAY=:0
: : suffices.
: : Hope this helps.
: : : but I don't have any workstations connected to the linux
box
: : : yet. I am installing oracle to a standalone machine. What
: is
: : : that work_staion_name supposed to be? Obviously using the
: : server
: : : name as work station name didn't do me any good.
: : Pinwu
: You must grant permission to connect to the XServer...
: If you XServer was started by root, you must grant from root
the
: permission via: xhost +localhost
: Regards,
: Miguel T.
Hi Terry,
I initially experienced the same "connection refused" message as
you from xlib when performing a local installation using GNOME.
My problem was to do with logging on to X as root (to mount the
CDROM) and then switching to the oracle account to do the
install.
If I logged to X as oracle I didn't need to change the default
DISPLAY value of :0 .
Daniel.
null

Oracle db installation on red hat 5

hi e.body
i am trying to install oracle 9i db on redhat 5. (all this setup is on virtual machine , i mean on windows xp i install vmware server then i install redhat 5 on this vmware. install this redhat on vmware with the help of ISO images. )
the problem untill now is with RPM. i made YUM server on this redhat machine.
i copy all the operating system source CDs in /var/ftp/pub. i use createrepo utility and made yum server.
but some RPM r not installed.
glibc-kernheaders \
compat-db \
compat-gcc \
compat-gcc-c++ \
compat-libstdc++ \
compat-libstdc++-devel \
gnome-libs \
openmotif21
these RPMs are not installed. how i proceed further. do i download these RPM from google.
plz reply
regards

9i is not supported and certified to run on RH5.
If You need 9i, then install it on RH4.
but regarding package installation - if You have support agreement and are using redhat network then simply use yum utility.
If You have somewhere rpm packages (install media or somewhere else in the networt), then
rpm -ivvh package.rpm - this command will install package
rpm -Uvh package.rpm - this one will update if You already have some older version of package.

Step wise installation on red hat as 4 and patches

hello,
plz send me step wise step oracle 9i installation on red hat AS 4 and required patches.

If anyone has such a beast, it'll be either Werner (http://www.puschitz.com) or Ivan (http://ivan.kartik.sk/)

Oracle 10g database installation in red hat 5

what are the packages needed for oracle 10g database installation in red hat 5?
what do you mean by yum way of installation?

Check on the release notes for your platform
This is for x86-64 Linux.. read it all, then you'll find the "6 Documentation Corrections and Additions" section you'll find the RPMs that you need
http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15666/toc.htm
then go to the official doc installation of 10gR2 on x86-64 Linux
http://download.oracle.com/docs/cd/B19306_01/install.102/b15667/toc.htm
Yum is a package management tool. This is what you'll be using to install the RPMs. But first you'll have to setup the Yum repository, usually what I do is stage the DVD media on the server then make it as a repository. If ever there's a specific (higher) version that I need then I just pull it on the RedHat Network.
There are a lot of HOWTOs about Yum. You may read on this link http://docs.fedoraproject.org/yum/en/
- Karl Arao
http://karlarao.wordpress.com/

How to install oracle developer 10g on red hat 5.3

Dear forum members,
i have to install oracle developer 10g on red hat 5.3 . I am searching on google and metalink but i did not find any doccument.
If somebody has some material or any doccument for this Installation plz help me.
regards

i have fullfilled pre-requisites to install developer 10g on red hat 4.5
i copy the source in "/var/opt/oracle/" Source is in .cpio format.
i unzip this source with cat Disk1.cpio | cpio -icd.
when i run the runINstaller it cant find /var/opt/oracle/..........Disk1/products.xml file.
when i find this file with command find -name 'products*' or find -name '*.xml'
i cant find products.xml.
is there any problem with source
reply

How to install Oracle 10g on to Red Hat Linux 5 Server

I'm new to both Linux and Oracle. I've been working on an installion of Oracle 10g on a Red Hat Linux 5 Server for about 2 weeks. I've been doing a lot of reading about installing Oracle on a Linux environment. I finally got to the installation portion and the Oracle Installer displayed a message that I had to have Red Hat 4 or 4 Enterprise to continue.
How can Install Oracle 10g onto a Red Hat 5 Linux Server"? Is there an option that I can use to bypass the OS checking?
Thanks

Unfortunately there is no way to access metalink without a valid account. You could then just try to skip preinstall requisites with this clause:
./runInstaller -ignoreSysPrereqs
or this method:
Copy the oraparam.ini from the installation source install/oraparam.ini to /tmp directory.
Edit the file /tmp/oraparam.ini so this file reads:
After
[Certified Versions]
Linux=redhat-3,SuSE-9,redhat-4,UnitedLinux-1.0,asianux-1,asianux-2,redhat-5
also, make sure you have these packages installed:
# rpm -ivh gcc-c++-4.1.1-52.el5.i386.rpm gcc-4.1.1-52.el5.i386.rpm
libstdc++-devel-4.1.1-52.el5.i386.rpm glibc-devel-2.5-12.i386.rpm
glibc-headers-2.5-12.i386.rpm libgomp-4.1.1-52.el5.i386.rpm
libXp-1.0.0-8.i386.rpm compat-libstdc++-296-2.96-138.i386.rpm
compat-libstdc++-33-3.2.3-61.i386.rpm
~ Madrid.

Install oracle 9i on Linux Red Hat 8.0 Professional

Hi all,
i need to install oracle 9i on Linux red hat 8.0 professional. I dont know if this platform is certified by oracle and if there are any problem to install that.
Any information will be appreciate.
Thanks in advance
Regards
Giuseppe

HI,
According to Oracle "Unix Installation/OS: RDBMS Technical Forum", it is not supported.
I am pasting the final answer from one of the Oracle Analyst: (Hope it is OK)
From: Oracle, Amit Podder 19-Aug-03 15:14
Subject: Re : Does oracle support 9.2.0.2.0 on Redhat 7.X or 8.0
Hi,
AS of now Oracle Server - Enterprise Edition Version 9.2 is not certified on Red Hat 8.0.
The information on future plans is not published so we are unable to convey any info on the same.
Warm Regards
AMIT

Issue with OHS (EPM) installation on Red Hat 6.4

Hello Gurus,
We are facing an issue with the installation of Oracle HTTP server which comes with EPM 11.1.2.2 using EPM Installer on Red Hat 6.4.
When I select the OHS product it says, that the Oracle software is not certified on the current operating system, however it does not happen with any other product in the suite
Is Red Hat 6.4 64 bit not a supported OS?
I have installed all the required libraries mentioned here: Oracle&#174; Fusion Middleware System Requirements and Specifications
Also my NPTL version is 2.12 which is higher than 2.3.4 as mentioned here: Oracle&#174; Fusion Middleware System Requirements and Specifications
Any help will be highly appreciated.

John,
My installation went smooth, however when I start the configuration (Oracle Database) I am getting the following error while configuring the shared service registry:
Failed to navigate from RegistryWizardState: Error while initializing registry. See logs for more details.
My DBA says that he has provided all the following privileges to the schemas.
CREATE SESSION
CREATE VIEW
CREATE TYPE
CREATE TABLE
CREATE CLUSTER
CREATE TRIGGER
CREATE SEQUENCE
CREATE INDEXTYPE
CREATE PROCEDURE
CREATE ANY SYNONYM
DROP ANY SYNONYM
UNLIMITED TABLESPACE
configTool has the following exceptions:
[2013-09-10T10:44:53.748+05:30] [EPMCMN] [WARNING] [EPMCMN-01001] [oracle.EPMCMN] [tid: 10] [ecid: 0000K46JlSgAXNIMyqqYMG1IBegW000002,0] [SRC_CLASS: com.hyperion.cis.utils.oui.OUIUtilImpl] Failed to determine home via OUI: [[
oracle.sysman.oii.oiii.OiiiInventoryDoesNotExistException: The inventory pointer location /etc/oraInst.loc is either not readable or does not exist
    at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiInstallAreaControl.java:1855)
    at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:292)
    at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:231)
    at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:180)
    at com.hyperion.cis.utils.oui.OUIUtilImpl.inventoryTemplateMethod(OUIUtilImpl.java:289)
    at com.hyperion.cis.utils.oui.OUIUtilImpl.findEpmOracleHomeFromInventory(OUIUtilImpl.java:67)
    at com.hyperion.cis.utils.oui.OUIUtilLinkageErrorProtectionWrapper.findEpmOracleHomeFromInventory(OUIUtilLinkageErrorProtectionWrapper.java:18)
    at com.oracle.preconfig.impl.InventoryPreConfigCheck.executeCheck(InventoryPreConfigCheck.java:23)
    at com.oracle.preconfig.PreConfigCheckTemplate.execute(PreConfigCheckTemplate.java:9)
    at Main.runPreconfigChecksAndExitIfFail(Main.java:142)
    at Main.main(Main.java:90)
com.hyperion.hit.registry.exceptions.RegistryException: Unable to create registry.
    at com.hyperion.hit.registry.RegistryConnection.createRegistry(RegistryConnection.java:354)
    at com.hyperion.hit.registry.RegistryUtils.initUpgradeRegistry(RegistryUtils.java:272)
    at com.hyperion.hit.registry.RegistryUtils.initRegistry(RegistryUtils.java:105)
    at com.hyperion.hit.registry.Registry.createBasicComponents(Registry.java:2305)
    at com.hyperion.config.document.Storage.initRegistry(Storage.java:245)
    at com.hyperion.cis.config.ConfigRegistryUtils.initializeRegistry(ConfigRegistryUtils.java:384)
    at com.hyperion.config.wizard.impl.RegistryWizardState$1$1.commit(RegistryWizardState.java:228)
    at com.hyperion.hit.wizard.Wizard$NextClass.run(Wizard.java:544)
    at java.lang.Thread.run(Thread.java:662)
Caused by: java.sql.BatchUpdateException: error occurred during batching: ORA-01950: no privileges on tablespace 'HYPSS_DATA'
    at oracle.jdbc.driver.OracleStatement.executeBatch(OracleStatement.java:6390)
    at oracle.jdbc.driver.OracleStatementWrapper.executeBatch(OracleStatementWrapper.java:248)
    at com.hyperion.hit.registry.RegistryConnection.createRegistry(RegistryConnection.java:344)
    ... 8 more
Any help will be highly appreciated.

Uninstall oracle 10g from Linux Red hat

is any body know the standard procedure to uninstall oracle 10g from linux red hat.

The correct answer is "Undo the changes you made during the install"
By this I mean:
Stop all of the processes
Delete the ORACLE_BASE directory (usually the one one level up from ORACLE_HOME)
Delete the oraInventory directory if it isn't inside ORACLE_BASE
Delete /etc/oratab, /etc/oraInst.loc
Delete /user/local/bin/coraenv, /user/local/bin/oraenv, /user/local/bin/dbhome
Undo any environment settings you may have modified (in .bash_profile and bashrc)
That should be just about it. That's how I usually clean out my system between installs.
~Jer

Graphic manager Oracle 9i on linux Red Hat 8.0

I would like to know if someone can help me about the way that i can start the Graphic manager of Oracle 9i on Linux Red hat 8.0, because after i installed Oracle, the manager starts but when I shut down my computer it never appeared again. Can you help me please???

I would like to know if someone can help me about the way that i can start the Graphic manager of Oracle 9i on Linux Red hat 8.0, because after i installed Oracle, the manager starts but when I shut down my computer it never appeared again. Can you help me please???

Installing Oracle 9i on Linux Red Hat 7.2

I got the following error when installing Oracle 9i on Linux Red Hat 7.2:
Initializing Java Virtual Machine from /tmp/OraInstall/jre/bin/jre. Please wait...
jre was not found in /tmp/OraInstall/jre/bin/../bin/i586/green_threads/jre
Any ideas how to fix the problem?
Thanks

Try installing 9i on RH 7.1. I don't believe 9i runs under 7.2 due to library incompatibilities.

ORACLE 8I Installation in Red Hat 6.0

Similar Messages

Maybe you are looking for