Oracle 8i Lite Synchronizatoin Problem--Very Crucial and Urgent

Currently,we are using Oracle 8i lite Version Release 4.0.1 in
our project.
Following is the problem we are facing during Web-To-Go
Synchronization.
We have published about 200 snapshots of tables on the Web-to-go
server.
After Installing the Web-to-Go Client,
the first time we went Offline, both the webtogo.odb and the
user odb got downloaded to the client's machine.
the size of user odb was about 10.7 MB containing 200
snapshots,without any data and the application about 15 MB.
We checked up the odb using plus80 and verified that all the
tables have been created(200 snapshots+200 snapshot logs).
Once we went Online , a memory/application error (illegal
operation,unable to access memory) was displayed.The m1 file
also remained in the client's machine.
Basically the synchronization fails from client to server.
Everytime the synchronization is fine,if the odb needs to be
created freshly,but once created and synchronized,the same error
is displayed.
We tried publishing with a reduced no of tables,and it went on
fine with both offline and online up to a size 8.28MB,with
about 152 tables.
An increase of even 10 KB by an addition of 2 more tables,gives
out the same error.
The limit on the no of snapshots is specified as 256 per refresh
group.
We are using only 200 as of now and that should be ok.
Please let us know the possible reasons for such kind of a
problem.
Let us know in case of any other clarification regarding the
problem.
Is there any limitation or requirement at the client site,w.rt
memory?
Pls Help
Meena.

Sanjay Kumar M.C. (guest) wrote:
: Hi,
: I had downloaded Oracle 8i Lite for NT (approx. 105 MB),
zip
: files data around 3 times and each time I get the error
message
: that the zip archive is corrupted . Is it the problem with the
: archive at the Oracle site.
: Can anybody help me to get the installable data set?
: Regards
: Sanjay
Hi
I experienced the same problem.
I have downloaded the file segments for oracle 8iLite and had
run the batch file.
And it worked.
Thanks!
null

Similar Messages

  • Oracle 9i Lite Installation Problems

    Hello, I'm installing Oracle 9i Lite Version over Windows XP. When I'm connecting the mobile server (like an apache server's module) to the repository, I write in my browser:
    "http://<mobile_server_name>:<port_number>/webtogo/startup"
    and the response of the browser is: "The requested URL was not found on this server". Someone knows, what's the problem?. What's the mobile server name and its port number?.
    Thank you.

    Jorge,
    You can check the tnsnames.ora file for the Mobile Server name and port number. Once you find the correct server and port information, please point your browser to:
    http://<Mobile Server>:<port>/webtogo
    for the Web-to-Go home or
    http://<Mobile Server>:<port>/webtogo/setup
    for the client download page.
    Please let me know if you have additional questions.
    - Junius

  • Oracle 8i Lite package problem

    Hi,
    I had downloaded Oracle 8i Lite for NT (approx. 105 MB), zip
    files data around 3 times and each time I get the error message
    that the zip archive is corrupted . Is it the problem with the
    archive at the Oracle site.
    Can anybody help me to get the installable data set?
    Regards
    Sanjay
    null

    Sanjay Kumar M.C. (guest) wrote:
    : Hi,
    : I had downloaded Oracle 8i Lite for NT (approx. 105 MB),
    zip
    : files data around 3 times and each time I get the error
    message
    : that the zip archive is corrupted . Is it the problem with the
    : archive at the Oracle site.
    : Can anybody help me to get the installable data set?
    : Regards
    : Sanjay
    Hi
    I experienced the same problem.
    I have downloaded the file segments for oracle 8iLite and had
    run the batch file.
    And it worked.
    Thanks!
    null

  • JDeveloper - Oracle 8i Lite Connection Problem

    I am trying to connect to Oracle 8i Lite database on my local machine (NT as the OS) from JDeveloper 3.1.1.2, I am getting "Network adapter could not establish connection" error. I can not even do Net8 Easy Config as I have no idea what the SID name is as 8i Lite installation did not ask for any SID name and it just created the polite databse (which works fine from ODBC).
    What is the default SID name for 8i Lite ?
    How to fix this probelm. Any help is greatly appreciated. VR.

    There is some more work you need to do to make JDeveloper work with Oracle Lite. Details are in an earlier response to a similar problem:
    http://technet.oracle.com:89/ubb/Forum2/HTML/003647.html
    Blaise

  • Oracle 8i Lite connection problem

    I'm trying to make connection with Oracle 8i Lite native jdbc driver. I'm getting error "Unable to find driver oracle.lite.poljdbc.POLJDBCDriver" when pressing Test button.
    olite40.jar is in IDEClassPath in jdeveloper.ini and Oracle 8i Lite is in Default Project Libraries.
    What I've missed?

    If you have added the Olite40.jar file to the IDE_CLASSPATH setting in the jdeveloper.ini file, make sure you restarted JDeveloper after editing the ini file.
    Also, make sure you specity 'Olite40.jar' not 'olite40.jar' (watch the case of the archive file name).

  • Oracle 8i Lite Login Problems

    I have installed Oracle 8i Lite on my computer, which has Windows 98. But I have been unable to access the database after trying several combinations of usernames & passwords such as tiger/scott and system/manager, among others. I must be missing a step somewhere in this process. I'd greatly appreciate any suggestions.

    I have installed Oracle 8i Lite on my computer, which has Windows 98. But I have been unable to access the database after trying several combinations of usernames & passwords such as tiger/scott and system/manager, among others. I must be missing a step somewhere in this process. I'd greatly appreciate any suggestions. Try "SYSTEM/P".

  • Oracle 8i lite installation problem

    I installed oracle 8i lite in my nt machine it gives me the option of 4 products
    1)Oracle 8i lite
    2)Oracle 8i lite
    3)Web to go
    4)Synchronization server for handheld
    the first two products i was able to install sucessfully but the 3rd and the 4th one i.e.
    Web to go and Synchronization server for handheld i was not able to install because the installation opens a DOS console and asks for username and password.i have tried giving all the possible combinations of username and password possible but nothing has worked out yet.please suggest me a solution for the oproblem as soon as possible.
    thanks
    RAJAN

    What kind of webtogo do you try to install?
    Have you installed a jre 1.1.8 or plus?
    Is your database started?
    If yes, you try to put system and system 's password.
    Best regards,
    Simone

  • Samsung 1.5TB External HDD problems - very slow and crashes Mac

    I recently bought a Samsung 1.5TB Story Station External HDD, to supplement my full iomega 320GB drive (firewire). The Samsung is USB 2.0, and I quickly realised that the Mac only has USB 1 - i.e. very slow. The HDD took about 15mins to even register in Finder and transfers were inevitably slow.
    I bought a new USB 2.0 PCI card, with 4 external and 1 internal USB 2.0 connectors. Installed securely and correctly, it should be plug and play right? Wrong. Firstly I checked with a Compact Flash card that the USB 2.0 was working and it is - very fast upload of images to the Mac. Then I tried to move a group of files from the Samsung to the iomega drive and it started off transferring really fast, saying under one minute to perform the task. Then it froze, and slowly worked it's way up to 2hrs remaining. I had to crash out of it in the end. I tried a few simpler transfers, but it froze in finder each time. Now the Samsung drive is not even getting recognised by the Mac.
    What am I doing wrong? Is there a shut down/eject order that I have not been doing? I usually just shut down the Mac with the HDDs on, and that has never been an issue for the iomega drive.
    Any help or links appreciated. PSD

    Hi-
    Welcome to Discussions!
    External drive controller chipsets vary greatly.
    Along with this, and a big problem for PPC Mac users, is that the makers don't take PPC Mac architecture into consideration.
    The first mistake is to rely on USB/USB 2.0 for connection.
    Firewire is +the surest+ bet for an external drive for a Mac.
    USB 2.0 is for WinPC machines, which often don't have firewire.
    It is NOT a reliable connection method for hard drives.
    Second, these ready made externals are often a problem with PPC Macs.
    WD MyBook, Seagate FreeAgents, and others, are often just no good.
    I don't see why the Samsung would be different.....
    The best way to use an external drive, is to get a firewire drive enclosure kit that has an Oxford chipset, and then install the drive of your choice inside.
    http://eshop.macsales.com/item/Other%20World%20Computing/MEFW91UAL1K/
    These all have drives installed, but the case and controller is definitely no problem:
    http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATAFW800_FW400USB
    I would return the drive.
    Is early failure a problem? Look here:
    http://www.newegg.com/Product/Product.aspx?Item=N82E16822152179
    http://www.testfreaks.com/external-hard-drives/samsung-story-station-hx-du015eb/ user-reviews/
    http://www.amazon.com/Samsung-Station-Desktop-External-HXDU015EB/product-reviews /B002C3S6V8/ref=cmcr_dpsynop?ie=UTF8&showViewpoints=0&sortBy=bySubmissionDateDescending#R9CEXOPSF7FKA
    All reviews have an alarming number of failures.

  • Oracle*i Lite ODBC Problem

    I have just installed Oracl8iLite on my laptop. with win98 ver 2 and 32 meg of ram.
    I have run into ODBC driver problems.
    Will I have the same problem with
    Oracle8i Personnel Edition?
    Help
    Monty6

    What kind of ODBC driver problems are you having?
    I'm having some ODBC driver problems myself and the error message is "The ODBC resource DLL (C:\WINDOWS\SYSTEM\ODBCINT.DLL) is a different version than the administrator (C:\WINDOWS\SYSTEM\ODBCAD32.EXE)"...
    Are you having the same problem?
    Can anyone tell me how to solve this problem?
    Thanks
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by monty ireland ([email protected]):
    i have tried and failed for the second time
    to install Oracle8iLite. I'm still getting
    ODBC drivre problems with WIN98. I should have never upgraded to win98 ver running FAT32.
    let me know if you have problems. i going to
    take the same approch tonight. if i can not find a patch for Oracle8iLite today.
    my new email addr is:
    [email protected]
    good luck... stay in touch
    monty6<HR></BLOCKQUOTE>
    null

  • Very important and urgent - i need info regarding a function module

    hi all,
    can any one suggest me a function module which calculate the
    difference in two dates and give answer in days.
    some one suggest me the following function m odule
      CALL FUNCTION 'HR_SGPBS_YRS_MTHS_DAYS'
           EXPORTING
                beg_da     = wpv_dati
                end_da     = wpv_datf
           IMPORTING
                no_cal_day = wpv_days
    Please suggest any other function module.
    or i can use this Function module only

    Hi,
      U can use the following function  module.
    CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
      EXPORTING
        I_DATUM_BIS                   = date1
        I_DATUM_VON                 = date2
      I_KZ_EXCL_VON              = '0'
      I_KZ_INCL_BIS                 = '0'
      I_KZ_ULT_BIS                  = ' '
      I_KZ_ULT_VON                = ' '
      I_STGMETH                     = '0'
      I_SZBMETH                     = '1'
    IMPORTING
        E_TAGE                        = days
    EXCEPTIONS
      DAYS_METHOD_NOT_DEFINED       = 1
      OTHERS                        = 2
    Reward if useful.
    Regards,
    Rajesh Akarte

  • I saved my file as a regular Indesign file, and when I went to open it on a different computer it had a lock on it and will not let me open it. Can someone please explain why this is happening and how to unlock it? It's for a very important and urgent pro

    Please help if you can!

    Assuming the file is stored on a network server, and the "other computer" is on that network as well; with InDesign not running on either, navigate to the folder where the InDesign file is stored and find the lock file (it will have the extension .idlk). Delete it.

  • Any difference in the dbms and jdbc drivers btw oracle 8i lite and 9i lite

    Is there any significant difference between oracle 8i lite and oracle 9i lite in terms of database and jdbc drivers?
    If not, it may be better off using oracle8i.

    According to Oracle , 9i lite is more powerful than 8i Lite.
    one thing, 8i Lite is not certified for windows 2000.
    jothi

  • ODBC connections to Oracle 9i Lite

    i'm currently using oracle 9i Lite 5.0.2 database and Palm OS 5.1. can any body send me a sample code in JAVAwith which i can connect to Oracle Lite database in my palm from a PALM Application using ODBC.

    I am running the OBIEE software on Windows XP Professional on a laptop. An Oracle 10.2.0.1 EE database also resides on this machine.
    My TNSNAMES.ora file is located in one of my Oracle Homes but I have a system environment variable set for TNS_ADMIN. I am using the default listener installed with the preconfigured database, and I can connect to the database ok from the PC using SQL*Plus, TOAD etc. I have also tried connecting to the ODBC data source set up for this 10g db from within Excel with no problems.
    The System DSN entry called ORCLSH uses the driver 'Oracle in OraDB 10g_home1'. I have tried the ODBC driver with both a username entered and not. The TNS entry alias ORCLSH is used, which matches my TNSNAMES.ora file entry in the location designated by TNS_ADMIN. My db service name is ORCL. The parameters in the data connections are left are their defaults, i.e., enable result sets, enable query timeout, enable thread safety - all checked.
    The connection pool has been named ORCLSH too. I'm using Call interface ODBC 3.5, max connections 10, data source name ORCLSH. Shared login - checked, enable connection poolng - checked, use multithreaded connections - checked, execute queries asynchronously - checked, parameters supplied - checked (defaults).
    The writeback tab has been left alone (prefix TT, bulk insert buffer size 32, trx boundary 10).
    What other parameter details do you need to know, other that what details I have previously provided?
    Cheers,
    John

  • Oracle 9i Lite Installation Issue

    Hi all,
    I have tried installing Oracle 9i Lite on Win Server 2000 and also on Windows XP. Installation seems to get stuck while it's installing Mobile Server Repository. Can anybody guide me please and let me know what I am doing wrong other then following oracle installation notes. :)
    Thanks
    Tahir

    Oracle9i Lite 5.0 is certified for EPOC V5. Nokia 9210 is based on EPOC V6/Quarz which is not supported. We have a working port in alpha quality which we might be able to give you. However we would need a strong business case. Send your business case and justification to [email protected]
    --martin
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Justin Miles ([email protected]):
    Will Oracle 9i Lite install on a GSM Nokia 9210 mobile phone (www.nokia.com/phones/9210)
    running the EPOC OS. Look forward to any comments.<HR></BLOCKQUOTE>
    null

  • Oracle 8i Lite CE Driver

    I have installed Oracle 8i Lite on my windows 98 (and my NT machine). After running the CESETUP to install on an HP Jornada, I cannot see the ODBC datasource CE. The driver does not seem to be installed.
    I am using MS Active Sync 3.0 for the HP running CE 3.01 (Core System Version 2.11)
    Thx
    Ron
    null

    If you have added the Olite40.jar file to the IDE_CLASSPATH setting in the jdeveloper.ini file, make sure you restarted JDeveloper after editing the ini file.
    Also, make sure you specity 'Olite40.jar' not 'olite40.jar' (watch the case of the archive file name).

Maybe you are looking for