Oracle 8i lite works in windows 2000 ?

I would like to know if Oracle 8i Lite works with Windows 2000 ?
null

IF its a new installation remove the ORACLE key from the REGISTRY.

Similar Messages

  • Install Oracle 8i Personald Edition on Windows 2000 Server SP2

    Hi
    I have problem to install the Oracle 8i Personal Edition on
    Windows 2000 Server SP2.
    I run the Setup.exe, I become the message (not exactly) “JRE
    (Java Runtime Environment) was not found…… please visit
    www.javasoft.com….. and install JRE version 1.1.7 or higher…”
    Now, I have download and install this JRE (JavaTM 2 Runtime
    Environment v 1.2.2_008 / Internationalized version of Java 2
    Runtime Environment).
    The error-messages comes again.
    Have everyone a idea?

    hi phill...
    why dont you try it out with the same CD and increase your RAM
    by another 64MB? This will be enough. The reason is , most
    Oracle 8i releases are combined with a java based Oracle
    Universal Installer. This requires some good amount of RAM. Just
    try it out with some extra memory. If this also didnt work, then
    send in the problem,error with your system config. This will
    help me in solving your problem.
    Imran.

  • Installation Problem Personal Oracle 8.0.4 on Windows 2000

    When trying to install Personal Oracle 8.0.4 on a Windows 2000 machine, i get an Error:
    "Unable to delete the NT Service for the SQL *Net V2 Listener".
    No previous installation of Personal Oracle is present on this machine as it's a newly installed OS.
    Any Help would be appreciated

    I tried installing Oracle 8i Personal Edition in Windows 2000. The installer loads and it start installing the files, except when it goes half way through the installation, it quits. I don't know if this is a bug in 8i Personal Edition or not. Because I am unable to install the software on my machine.

  • Oracle 8i Installation problem on Windows 2000

    I had purchased a Oracle8i (MS/Windows NT CD (E-Commerce), part Number A94674-01 in the month of Jun 2000.
    When I tried to install Oracle 8i personal edition of Windows 2000 ver.
    The installation got completed smoothly. But after that I was not able to start my database and even Windows 2000 crashed after that. After every crash I reinstalled windows 2000 and oracle 8i but the result was same. My whole purpose of purchasing Oracle 8i on windows 2000 is getting defeated.
    I would request you send me solution what to do ? Or replace my Oracle S/W. Its useless for me right now.
    My M/C configuration is
    Dell P-III (256 MB, 300 Mhz) with sound card.
    20 GB Hard Disk of 7200 rpm.
    The primary O/S is Windows 98.
    The Hard disk is partitioned into no. Of logical drives.
    They are like 2GB of each (C, D, E, F) and G 10 GB
    C part ion has got Windows. And G has got windows 2000. There is enough space in all part ions.
    I would appreciate if you can solve my problem as soon as possible.
    Sincerely,
    Shekhar
    null

    IF its a new installation remove the ORACLE key from the REGISTRY.

  • Oracle 8i Client running on Windows 2000 Server

    Hi,
    I have Oracle 8i Client running on Windows 2000 Server. I need to connect to Oracle 8i Server running on Sun Box.
    I have problems with connectivity.
    When I do tnsping <service name>, I am geting the followiing
    error:
    C:\>tnsping <Instance name>
    TNS Ping Utility for 32-bit Windows: Version 8.1.7.0.0 - Production on 04-FEB-20
    02 16:37:01
    (c) Copyright 1997 Oracle Corporation. All rights reserved.
    Attempting to contact (ADDRESS=(PROTOCOL=TCP)(HOST=<IP Address>)(PORT=1521)) TNS-12541: TNS:no listener
    Can any one help me out
    Thanks
    mka

    Hi,
    I have Oracle 8i Client running on Windows 2000 Server. I need to connect to Oracle 8i Server running on Sun Box.
    I have problems with connectivity.
    When I do tnsping <service name>, I am geting the followiing
    error:
    C:\>tnsping <Instance name>
    TNS Ping Utility for 32-bit Windows: Version 8.1.7.0.0 - Production on 04-FEB-20
    02 16:37:01
    (c) Copyright 1997 Oracle Corporation. All rights reserved.
    Attempting to contact (ADDRESS=(PROTOCOL=TCP)(HOST=<IP Address>)(PORT=1521)) TNS-12541: TNS:no listener
    Can any one help me out
    Thanks
    mka

  • Working with Windows 2000 ?

    Hello, I'm new to Java but been programming 15 years, hell knows why I waited till now to use Java but it is great !
    I want to write some applications that control and work with Windows 2000. I realise they would not be platform independent but is this sort of thing possible ?
    or .... just as an example what if I wanted to control some feature of the linux os ?
    thanks
    C

    It is possible. All you need to know is how to use JNI. I think there are only two books out there about JNI, I would recommend the one from Sun.
    You can download it here: http://java.sun.com/docs/books/jni/index.html

  • AT-AO-10 doesn´t work with Windows 2000

    I have an AT-AO-10 board that doesn’t work with Windows 2000. I have reserved two IRQs for legacy devices (non plug and play) in BIOS. The AT-AO-10 has got assigned these IRQs, a DMA and a base address that are free, and there aren’t any hardware conflicts, but the board doesn't pass the MAX's text.
    In Windows 'Information System', the board is shown in 'Forced hardware', but I don’t know that is a problem.
    If the board is unplugged, error messages are the same.

    Hello;
    You didn't mention what version of the NI-DAQ driver you are using over there. Anyway, my suggestion to you is to uninstall the NI-DAQ driver you have installed, remove the board, reboot the machine, download and install the latest NI-DAQ version (6.9.3) from NI web site.
    Try the installation with the new driver, and if that is still not working, the best bet is to try the same installation on a different machine to double check if the hardware is not defective.
    Regards
    Filipe A.
    Applications Engineer
    National Instruments

  • Which version of oracle will be working in Windows 7

    Please suggest me that Which version of oracle will be working in Windows 7.
    Please provide me the link to download of that version.

    Oracle 10g works property on Windows 7. You just need to download Oracle 10g Release 2 for Windows Vista and install it on Windows 7 using "Windows Vista SP 2 Compatibility Mode" and "As Administrator".
    answered by Wendell
    note:-but it is not certified by oracle.
    source:-Re: ORACLE 10g on Windows 7 x86 & x64

  • AC97 onboard sound DOES NOT WORK under Windows 2000

    Just an FYI, the AC97 Audio on your MSI mainboard will not work under Windows 2000, for which the AC97 hardware is not certified. If you try to use it, your audio output will be intermittant at best and will crash your audio applications at worst. A maddening and disheartening problem for people like me who didn't realize the problem existed and spent many hours trying to getting it to go away.

    hiya -
    I am have this trouble as well!
    Are you useing professional, or Advaced server?
    I have done EVERY kind of update... so dice.
    *sniff *

  • Ipod not working in Windows 2000

    I have a mac at home. I've already synced my ipod and don't want to lose anything on it.
    When I try to use the ipod as a usb drive at work with windows 2000, it recognizes the ipod. However, when I try to accsses the drive it says its not formatted and asks if I want to reformat it. I don't want to reformat because then I'll lose everything.
    Can I use the ipod as a usb drive on windows 2000 without reformatting?

    Never mind. I found XPlay and It works great!
    Fred

  • Can I install Oracle Report Server 6i in Windows 2000???

    Can I install Oracle Report Server 6i in Windows 2000???
    Please reply.
    Thanks,
    Mukesh

    Yes you can, but be sure you will not install it in the same home with 8.7 or later versions of database.

  • Why will a stand alone executalbe with an installer work on windows 2000 and crashes on windows xp professional?

    When I run the setup.exe file on a Windows 2000 system it installs properly, but the same file run on a XP Professional system I get an error stating Fatal Error: Installation ended prematurely because of an error.
    See here for more information on the specific installer I'm trying to use.
    In fact I get this error for any stand alone executable I try to install on any XP machines. I am using LV 7.1. Is there a way to manually install eve
    rything?
    Thanks

    Sure you can Install a lv application manually. just copy the exe-file,
    support files in a folder. For the runtimeengine just copy the file
    lvrte.dll in the folder of your application or in the windows system folder.
    Hope that helps, Niko
    BB Herman wrote:
    > Why will a stand alone executalbe with an installer work on windows
    > 2000 and crashes on windows xp professional?
    >
    > When I run the setup.exe file on a Windows 2000 system it installs
    > properly, but the same file run on a XP Professional system I get an
    > error stating Fatal Error: Installation ended prematurely because of
    > an error.
    >
    > See
    > HREF="http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000...
    for more information on the specific installer I'm trying to
    > use.
    >
    > In fact I get this error for any stand alone executable I try to
    > install on any XP machines. I am using LV 7.1. Is there a way to
    > manually install everything?
    >
    > Thanks

  • Oracle 8.1.7 client installer won't work under windows 2000

    I am trying to run the latest oracle client install of 8.1.7 on my windows 2000 PC and when I double click on it, it show the hour glass for a few seconds, then nothing happens. No screens come up at all. I have a Dell PC with an ATI rage 16 MB ultra card and I have dowlnloaded the latest jre 1.1.8 and nothing helps. If I try another kind of PC like my ibm, the installer works fine. Dell has no answers??

    I found the solution on another discussion group and it worked for WinNT4 SP6a:
    First copy your CD content to your hard disk (by example c:\temp), then rename file "symcjit.dll" (by example "symcjit.old") in directory "c:\temp\Stage\Components\Oracle.swd.jre\1.1.7.30\1\DataFiles\Expanded\jre\win32\bin".
    Finally, run Setup.exe in directory "c:\temp\Install\Win32".

  • Can I install Oracle 8.1.5 on Windows 2000 server or Windows 2000 professional

    Hi,
    Can I install Oracle 8.1.5 on a Windows 2000 server or Windows 2000 professional server?
    Regards,
    Zurvaan

    Yes, of course. Both versions works but you have to be prepared for lots of RAM.

  • Installing Oracle  8.1.7 on Windows 2000

    Hi Guys,
    I am trying to install Oracle 8i ( 8.1.7) on windows 2000 (P4) ...but when i click install products ...nothing happens....ie setup screen doesnot come up.....any woraround techniques or its bug ....
    Thanks in advance...
    Dhananjaya

    Hi,
    check out http://www.intercast.de/support/processors/pentium4/issues.htm
    (=> There's a problem with the symcjit.dll and Pentium 4 Processors, just rename the symcjit.dll in the installdir and i will work fine !)
    Greetings,
    Oliver

Maybe you are looking for