Oracle 8i Personal edition 8.1.7.4

Where can i download Oracle 8i Personal edition 8.1.7.4 in Technet ?
I found only 8i Release 3....
Thanks for your help

This is the Oracle Database Lite forum. Can you please repost your question on the general database forum: General Database Discussions

Similar Messages

Oracle 8i Personal Edition

I NEED to download Oracle 8i Personal Edition. Obviously, it's been yanked from the site. Are there any other places I can download this? Or any other places I can get a hard copy. This is extremely urgent! Someone help, please.

Here you can still find the software you are looking for:
http://otn.oracle.com/software/htdocs/devlic.html?/software/products/8i_personal/htdocs/winsoft.html

Oracle 9i Personal Edition

I REALLY need to get this installed, see previous message below. Can anyone help.

I downloaded Oracle 9i Personal edition from Oracle.com.
Installed the same on Win Me with a starter database.
I am not able to open the database since it asks me to enter a password which i've never entered.
I am not able to create a session. The moment I try to create a session on SQL, the database starts opening but i cannot get further since it asks for the password.
Please Help. Try using the generic username of scott & the generic pw of tiger. Hope this helps Hi,
Try this from dos prompt
c:\> set oracle_sid=<sid_value>
c:\> sqlplus system/manager
Can you elaborate what you meant when you say "the database starts opening" ? What is the error number and error message you are getting?
HTH

Problems facing while installing Oracle 8i personal edition under win98se

hello,
I am having problems while installing Oracle 8i personal edition
under win98se.
I am stuck on the creation of database. it always stuck at 85%.
I've try installed many many times.. but it still the same..
what can i do?
i am using win98 se.
is there any solution for this problems?
thanks~!

Under Win 98SE (Personal Oracle 8i)creation of database - very
long. Therefore choose a mode of creation of base - copy from CD.
Then the base can be increased.
Best regards - Alex

Errors in simple query in oracle 9i personal edition

hi,
i have oracle 9i personal edition release 9.0.1.1.1 - production.
with it came sql*plus release 9.0.1.0.1 - production
i have installed it on windows 98SE
what i did is the following
step 1:
create type address_ty as object
(street varchar2(50),
city varchar2(50),
state char(2),
zip number);
when i executed i got message "type created"
step 2 :
create table customer
(cust_id number ,
person address_ty);
when i executed this i got message "table created"
step 3 :
insert into customer values
(3,address_ty('xyz','abc','AP',4563));
i get messsage "1 row created"
step 4 :
select cust_id,person.street from customer;
i get error message .......
select cust_id,person.street from customer;
ERROR at line 1:
ORA-00904: invalid column name
i tried this example from the book "Oracle Complete Reference" from oracle press.
what is the problem how to avoid it.
i am a beginner help
gopal

hi! i'm not very sure, but your second field selected is person.street, do you have this field?
why not try just select * from tablename, you should see the result.
hope that helps.
rgds.

Oracle 8 personal edition - Installation problem

Dear Sirs,
I want install on windows xp the database Oracle 8 Personal Edition.
I select to install only the database standard without the reply.
Start the installatin and when dependency analysis oracle give the error:
stopsrvc.vrf{78}: Type mismatch in argument '0' when calling 'contains'
stopsrvc.vrf{78}: 'STRING' expected when 'LIST' found.
Can you help me?
I know that this version of DB is not supported. But I must a test.

This combination, to my knowledge, was never certified. If I am not wrong, you need to find a Windows 98 SE/2000 setup for running this personal edition successfully.

PL/SQL does not work in Oracle 8i Personal Edition

I just installed Oracle 8i Personal Edition for Win 98. Everything works perfectly, except the PL/SQL.
Then I tried to install Oracle 8i EM, but I always get the listener or adapter error. Even when I tried to start the listener from lsnrctl prompt, it gives me those errors. Anyone can help?

You need use correct type when you create object.
Don't forget object in reality is a memory pointer,
so what if you don't allocate correct memory in creation,
you can't treat object as subtype.
And meanwhile, it doesn't depend on Oracle version -
your example doesn't work in 9.2.0.1 for example.
SQL> declare
2 super one_t;
3 sub two_t := two_t(1, sysdate);
4 begin
5 super := two_t(1, sysdate);
6 sub := treat(super as two_t);
7 dbms_output.put_line('sub ' || sub.x || ' ' || sub.y );
8 select treat(super as two_t) into sub from dual;
9 dbms_output.put_line('super ' || super.x || ' ' || super.y );
10 if sub is null then
11 dbms_output.put_line('stupid');
12 end if;
13 if sub is of (two_t) then
14 dbms_output.put_line('stupid');
15 end if;
16 end;
17 /
sub 1 08.06.05
super 1 08.06.05
stupid
&nbsp
PL/SQL procedure successfully completed.Rgds.

SQL Plus not working in Oracle 8i personal edition

I just installed Oracle 8i personal edition, went through all the steps. When I start SQL* Plus, I give it the SCOTT/TIGER combo, but when it tries to start up the database, it asks for another password, which I can't figurew out.

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by John Meyer ([email protected]):
I just installed Oracle 8i personal edition, went through all the steps. When I start SQL* Plus, I give it the SCOTT/TIGER combo, but when it tries to start up the database, it asks for another password, which I can't figurew out.<HR></BLOCKQUOTE>
Fixed the problem yesterday.
null

Unable to start listener in Oracle 10g personal edition

Hi all,
I am trying to start the listener on my Oracle 10g personal edition. I tried this from Windows' Administrative Tools' and then 'Services'. I also tried it from the Command line. Both methods fail. Here are the error messages for each method:
In 'Services' in Windows:
The OracleOraDB10g_home1TNSListner service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performance Logs and Alerts service. In 'Command Line':
D:\oracle\product\10.2.0\db_1\BIN>lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 23-MAY-2012 09:47:02
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is D:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Log messages written to D:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ABCDEFG)(PORT=1521)))
TNS-12542: TNS:address already in use
TNS-12560: TNS:protocol adapter error
TNS-00512: Address already in use
32-bit Windows Error: 48: Unknown error
Listener failed to start. See the error message(s) above...
D:\oracle\product\10.2.0\db_1\BIN> Any ideas have this issue could get resolved.
Thank you in advance,
Seyed

Seyed_G wrote:
Hi all,
I am trying to start the listener on my Oracle 10g personal edition. I tried this from Windows' Administrative Tools' and then 'Services'. I also tried it from the Command line. Both methods fail. Here are the error messages for each method:
In 'Services' in Windows:
The OracleOraDB10g_home1TNSListner service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performance Logs and Alerts service. In 'Command Line':
D:\oracle\product\10.2.0\db_1\BIN>lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 23-MAY-2012 09:47:02
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is D:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Log messages written to D:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=W99X01G4R08B1.okdhs.int)(PORT=1521)))
TNS-12542: TNS:address already in use
TNS-12560: TNS:protocol adapter error
TNS-00512: Address already in use
32-bit Windows Error: 48: Unknown error
Listener failed to start. See the error message(s) above...
D:\oracle\product\10.2.0\db_1\BIN> Any ideas have this issue could get resolved.
Thank you in advance,
SeyedHas Windows Service for Listener been successfully started & running now?

Oracle 9i Personal Edition Download Problem

Hi there,
I'm currently attempting to download Oracle 9i Personal Edition, however upon clicking on the file link, I'm being constantly presented with the login page (even after having logged in). I checked my browser (MSIE 6) and cookies are enabled. Trying the same procedure for other files yielded the same unsuccessful results. Can anyone help please (my username is [email protected]). Thanks in advance!
Regards,
Johan

Download it again. I had the same problem the first time. It happens when there is a problem in your internet connection. The second time I downloaded it, it worked fine.
Hope this helps.

Oracle 9i Personal Edition Lean Install

I want to install Oracle 9i Personal Edition on a Windows Box(NT/2000/XP). I would like to make it as lean as possible (ie. minimal disk space, minimal services, etc). The databases deployed on this would have tables, procs, functions, views, packages, sequences, users & roles. Any tips on how to minimize what is installed? tia.

I downloaded Oracle 9i Personal edition from Oracle.com.
Installed the same on Win Me with a starter database.
I am not able to open the database since it asks me to enter a password which i've never entered.
I am not able to create a session. The moment I try to create a session on SQL, the database starts opening but i cannot get further since it asks for the password.
Please Help. Try using the generic username of scott & the generic pw of tiger. Hope this helps Hi,
Try this from dos prompt
c:\> set oracle_sid=<sid_value>
c:\> sqlplus system/manager
Can you elaborate what you meant when you say "the database starts opening" ? What is the error number and error message you are getting?
HTH

How to use log in to Oracle 8i personal edition SQL Plus?

Hi, this is my first time using Oracle 8i personal edition. But after installation, I was told to enter
User Name, password and host string in order to use SQL Plus
But I have no idea what to enter for the above three
By the way, I was prompted with the following message after installation,
Global Database Name: Oracle
SID : Oracle
Password : ******
database name : People
system identifier : People
system account : manager

hi to connect to SQL plus write the following:
user name: scott
password : tiger
host string : leave it empty if it requires again then write orcl
bye

Cannot install Oracle 8i (Personal Edition) 8.1.7 on Windows 98 (Second Edition)

Hello,
I am unable to install Oracle 8i Personal Edition on my Windows 98 (Second Edition) system. I have selected "typical" install. All the files get installed (100% complete) but then the Configuration Tool install phase fails to complete when installing Oracle Database Configuration Assistant. I get the following error message :
java.lang.NullpointerException
at DropOracle.QueryDB(Compiled Code)
at DeletePanel.InitControls(Compiled Code)
at DeletePanel.<init>(DeletePanel.java:100)
at DBCreateWizard.<init>(DBCReateWizard.java:569)
at DBCreateWizard.main(DBCreateWizard.java:1422)
The system just hangs with the "in progress" message.
The previous step -
The Net8 Configuration Assistant install completes successfully
(return code 0).
If anyone can help me resolve my problem it will be greatly appreciated.
Or if you could tell me which Oracle email address (or phone number) I should address my problem to it will be appreciated. I do NOT have a Oracle Support Licence (I only purchased the evaluation CD pack).
I have installed Java 2 (JDK 1.3) in a separate directory - but I understand Oracle 8i has its own version of JRE 1.1... in its own subdirectory structure ... so my JDK 1.3 should not be interfering with the Oracle 8i installation programs.
Many thanks in advance.
Partha Sur
732-873-2547

What is your RAM? I ran into the same problem, even though I had more RAM then required. I had to shutdown everything, make a very basic wallpaper that did not put too much strain on the system, then it installed.
Unistall Oracle, remove all the remaining files and the directory by hand. Also you have to remove any trace of Oracle in your regedit. Check if path to Oracle is still in autoexec.bat; if it is delete it - the Oracle path not the file. Reboot and then do Alt-Ctr-Del and turn off all the unecessary programs and try installing it again.
Hope it works.
Iwona

Installing oracle 8i personal edition 8.1.5 on windows XP system

I want to know the installing procedure for oracle 8i personal edition 8.1.5 on windows XP system or which version of Personal Oracle can be loaded in Windows XP System. Pl do the needful.
Thanks & Regards,
Shahul.

8I ON XP
be careful xp stand for xtra problem :-)
i think if u want to install oracle personal edition
on xp go for
Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP
see
http://otn.oracle.com/software/products/oracle9i/index.html
and enjoy your life:-)
kuljeet pal singh

Installing Oracle 10g personal edition

Hi,
I am trying to install Oracle 10g personal edition on ubuntu. After installing I ran the following command: /etc/init.d/oracle-xe configure and by mistake gave a port number for HTTP port on which already another server is running. But now I am unable to change my configuration settings.
Everytime I give the command /etc/init.d/oracle-xe configure it says "Oracle Database 10g Express Edition is already configured"
How can I change the configuration setting now? Do I need to reinstall it? Would be a great help, if somebody can tell me.
Thanks,
tulip

In oder for you to handle ports and monitor port assignment follow these steps:
SQL*Plus: Release 10.1.0.2.0 - Production on Mi Jan 25 11:44:33 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Beta
SQL> -- get current status
SQL> select dbms_xdb.gethttpport as "HTTP-Port"
            , dbms_xdb.getftpport as "FTP-Port" from dual;
HTTP-Port   FTP-Port
     8080          0You can change the http port and the ftp port to whatever you like (keep in mind that you need special privileges for ports < 1024 on Unix/Linux systems).
SQL> -- set http port and ftp port
SQL> begin
2    dbms_xdb.sethttpport('80');
3    dbms_xdb.setftpport('2100');
4 end;
5 /
PL/SQL procedure successfully completed.
SQL> select dbms_xdb.gethttpport as "HTTP-Port"
            , dbms_xdb.getftpport as "FTP-Port" from dual;
HTTP-Port   FTP-Port
       80       2100If you only want to use the database without allowing access via http or ftp then you can disable both:
SQL> -- disable http and ftp access
SQL> begin
2    dbms_xdb.sethttpport('0');
3    dbms_xdb.setftpport('0');
4 end;
5 /
PL/SQL procedure successfully completed.
SQL> -- get current status
SQL> select dbms_xdb.gethttpport as "HTTP-Port"
            , dbms_xdb.getftpport as "FTP-Port" from dual;
HTTP-Port   FTP-Port
        0          0~ Madrid

Does Oracle 8i personal edition has Pro*C ?

Does Oracle 8i personal edition has Pro C precompiler in it? I installed Oracle 8i but removed it long back so forgot if it has ProC in it... If its not there, is it available somewhere to download from? Thanks.

Oracle8i client installation will provide you with the Pro*C pre-compiler.

Oracle 8i Personal edition 8.1.7.4

Similar Messages

Maybe you are looking for