Oracle 9.0.1.1.1 For Windows/2000 HTTP server

I can not start Oracle HTTP Server after Oracle 9.0.1.1.1 installation . I am getting error : The application or DLL $ORA_HOME\Apache\JServ\ApacheModuleJServ.dll is not a Valid Windows Image . Bad dll file in install disks ?
File ApacheModuleJServ.dll size 54K . Please send a valid ApacheModuleJServ.dll .

The Calendar SDK was only certified for the platforms you list, although I don't expect you would encounter any platform-specific problems using it on Windows 2000 or XP. That said, those platforms are not officially supported for 9.0.4.2, with all that implies.
The upcoming 9.0.5 release should be certified for Windows 2000 (only - and, of course, subject to change up until it actually ships).
Graham

Similar Messages

Oracle 8 Driver for Windows 2000

I recently upgraded my Web servers to Windows 2000 Advanced Server. Previously I was running the site in Windows NT and used the setup program that came with the application to install the ODBC driver. I ran the same program in Windows 2000 but at the end of installation, it displays an error. Where do I download Driver and setup program to install correct version for windows 2000 Advanced Server?

Which version of Oracle do you have and what is the error? Older versions of Oracle, i.e. 8.0.5 & 8.1.5, probably pre-date Windows2000 and thus aren't likely to be certified there.
Justin

Windows 2000 Advanced Server Service Pack 2 and Oracle 8.1

Hy,
I've got Oracle 8.1.6 instaled over an Windows 2000 Advanced Server user as a web server. Yesterday I updated it with the service pack 2 for windows 2000.
When I restarted the server after the install, the Oracle database services didn't start. They stay "Starting" but didn't finish to start. I tried to start them again but they were locked. I couldn't stop/restart them.
I had to uninstall the SP2. Then it works OK.
Is there any known problem with Oracle 8.1.6 and the SP2?
Thanks

When Oracle installs itself, it usually replaces one or more Windows system files with its own versions. Your SP2 installation probably replaced those files with originals and Oracle got confused.
The only solution I can think of is to install all the necessary SPs first and then Oracle (when possible).

Upgrade Oracle 11.1.0.6.0 x64 to Oracle 11.1.0.7.0 for Windows Server 2008

Hi,
I am a little confused because I have Windows Server 2008 64 bit operating system and had installed Oracle 11g 11.1.0.6.0 (x64) prior to the Oracle 11g 11.1.0.7.0 for Windows Server 2008 install package becoming available.
My database needs no backup of data as it is a fresh installation so its removal is not a problem.
To now upgrade to Oracle 11g 11.1.0.7.0 for Windows Server 2008 do I need to
a) Uninstall Oracle 11.1.0.6.0 (x64) and then install Oracle 11.1.0.7.0 on Windows Server 2008
or
b) Apply patch 6890831 (will this upgrade from 11.1.0.6.0 x64 to 11.1.0.7.0 for Windows Server 2008?)
Any help much appreciated as having looked at documentation I am still confused what I need to do.
Thanks.

Duplicate post
Upgrade Oracle 11.1.0.6.0 x64 to Oracle 11.1.0.7.0 for Windows Server 2008
Please continue with other thread.

Help! oracle report out of order after update Rollup for windows 2000 sp4

hello once again
i haven't received any solution of my problem, so i am again uploading it.
----PROBLEM IS GIVEN BELOW-----
i am having a problem in oracle report printing (2000,6i). I have installed patch "update Rollup for windows 2000 sp4" on windows 2000. now when i send report(132 column) for printing to the printer, the report fails to expand to 132 columns and data is printed in unformatted fashion. in order to print the report correctly i have to remove the patch from the windows.i have set all parameters and
defining page size in files like wide180.PRT in printers folder in oracle directory.
Is there anyway to print the report without uninstalling windows patch?
thanks

I don't have any idea about this issue. Maybe someone else on this forum can help. Meanwhile, there are couple of places you can search for this issue:
Search google for printing issues with this patch
Search Microsoft forums for Windows 2000
And if you have metalink account, search metalink forum, document/note or open a SR for this.

Oracle client version 9.2.0.3 for windows 2000

Where can you find oracle client for 9.2.0.3 for windows 2000? Please advice.
Thank you,
Shawn

Shawn,
Instant Client was released in 10gR1 (10.1.0.2). Thus, it is not available for 9.2.0.3.

Oracle report out of order after update Rollup for windows 2000 sp4

hi
i am having a problem in oracle report printing (2000,6i). I have installed patch "update Rollup for windows 2000 sp4" on windows 2000. now when i send report(132 column) for printing to the printer, the report fails to expand to 132 columns and data is printed in unformated fashion. in order to print the report correctly i have to remove the patch from the windows. Is there anyway to print the report without uninstalling windows patch?
thanks

Hi
first of all thanks for replying .if you mean defining page size in files like wide180.PRT in printers folder in oracle directory, off course i have set parameters. thing is that printing works fine without windows patch but it gets deteriorated after installing the patch.
Thanks

Oracle 8.1.6 EE install to Windows 2000

Using Windows 2000 Advanced Server on a Compaq Proliant 3000, fresh install. Install Oracle 8iR2 (8.1.6) Enterprise Edition, accept default locations, choose typical install. Using the download from the Oracle Technet download pages (have tried downloading several times to make sure) and beginning from autorun.exe.
It doesn't install. I've tried on other machines too. I get an I/O error at the Intermedia install stage (it displays vszip.dll as the current file).
I can't think of anything I'm doing wrong and I've tried on other boxes and with custom install settings.
Any ideas appreciated?
Jason

Hi,
I'm new with Oracle, and I'm having problems installing the database v8i on Windows XP-Home. My classmates have successfully installed it with both XP-Pro and XP-Home. The problem is that when I click on the Install icon, the disk spins for a while, then nothing happens, and the installation doesn't even start. When I list the files on the CD and click on the setup file and select Run from the pull down menu, and enter my user name (which has administrator privileges) and password, Oracle opens a window with a message that the registry cannot be modified because I don't have permissions, and closes down.
I know the CD is good, because I tried in a different computer. Are there any settings on Windows that I'm missing? Any help would be much appreciated. Thanks.

Automatic Startup of Oracle 8.1.6.0 on MS Windows 2000

Problem: Database not starting automatically.
OracleService<SID> states "starting" instead of "started".
Database can be opened manually via DBA Studio or via sql command line.
O/S: W2k Service Pack 2
RDBMS Version: Oracle 8.1.6.0.0 for Windows
Tasks previously completed to remedy the problem with no satisfactory results.
The OracleService<SID> deleted and reinstalled using oradim.exe.
Oracle Service startup set to "Automatic";
Registry checked to ensure the path is correct for the parameter file. Path is over 39 characters (another post said older versions could handle only 39 chars - is this still a problem in 8i).
Has anyone else experienced this problem and subsequently resolved it or developed a work-a-round.
Thanks
David Miller

Hi,
I'm new with Oracle, and I'm having problems installing the database v8i on Windows XP-Home. My classmates have successfully installed it with both XP-Pro and XP-Home. The problem is that when I click on the Install icon, the disk spins for a while, then nothing happens, and the installation doesn't even start. When I list the files on the CD and click on the setup file and select Run from the pull down menu, and enter my user name (which has administrator privileges) and password, Oracle opens a window with a message that the registry cannot be modified because I don't have permissions, and closes down.
I know the CD is good, because I tried in a different computer. Are there any settings on Windows that I'm missing? Any help would be much appreciated. Thanks.

Oracle 8.1.7 on Windows 2000 Advanced Server

We have a client that is running the 8.1.7 server on a Windows 2000 Advanced Server. The database service is set to start automatically, but every time the server reboots the database service says that it is started, but when we try to access the database we get a message that says "Oracle not available". After we go into the DBA Studio and manually open the database everything works fine (until we have to reboot again). Are there any known issues with 8.1.7 and 2000 Advanced Server? Is there some configuration setting that we could be missing that will get the database to automatically start like it is supposed to?
Thanks in advance for any help,
David L. England,
Software Engineer, AlphaCorp

They are using a static IP and the network was all setup before we installed Oracle. I think we have the local System account starting the service. Is the right to start the database something we need to assign to the local System account or should we be using a different account?
I don't remember ever having to go into the service and change anything on any system we have setup before, but this is the first 2000 Advanced Server we have done.
Thanks,
David

Where is 9i Enterprise Edition for Windows 2000?

Can anyone tell me where can I get 9i Enterprise Edition for Windows 2000?
I only see the Sun's Solaris version.
Can you run 9i AS in 8i 8.1.7?

Technet download pages list 9iAS for Windows,
follow the link below:
http://technet.oracle.com/software/products/ias/content.html

When will 9iAS release 2 for Windows 2000 be available?

Hello Oracle gurus,
Do you have an idea when will 9iAS Release 2 for Windows 2000 be available?
Vince

The release date has slipped. We've found some issues which must be fixed before we can release on Windows. Hopefully we will have it soon.
I understand that there is a high level of anticipation. I appreciate everyone's patience.
Thanks,
Ashesh Parekh
Oracle9iAS Product Management.

Installling Oracle 9.0.1.1.1 on Windows 2000

Hello,
I am not able to install Oracle 9.0.1.1.1 on WIndows 2000(service pack 2).
While installing Oracle 9i on Windows 2000(service pack 2), installer exits without showing or logging any error.
Does anybody know the reason/workaround for this problem?
Thanks.
Regards,
Hemant

how often did you try to install ?
maybe some log files of your previous installations
reside in your personal folder.
If the installer finds this information it will terminate
without warnings and errors.
Cheers,
Udo

Can not install Database Oracle8i (8.1.7) for Windows 2000/NT

I am not sucessfull in installing (Downloaded Unzipped then copied to CD) both version of Database "Oracle8i Release 3 (8.1.7)" Enterprise and Standard edition for Windows 2000/NT". After the start->run->autorun the CD spins for a minute then nothing happens. I tried running other files as well such as setup and install but still doesn't do anything.
Read the Installation document but can not find the answer, need help from anyone (Oracle expert to non-expert) is greately appreciated.
Server name = I am using Windows2000 "local" server.
Date/Time = Happened yesterday and today (March 3-4/2002)
Browser + Version = Microsoft Internet Explorer 5.0
O/S + Version = Windows2000 version 5.0
Error Msg = None (Will not install)
################################################################T
Thanks...

I am having the same problems!
Any help here would be great!! Stephen, Hi!, I think I know what the problem is....but I need your confirmation on my hypothesis. These are the scenarios:
PC#1
=====
In this computer it has operating system Windows2000 on C: Drive.
RESULT: SUCESSFULLY INSTALLED THE ORACLE 8I (8.1.7) Enterprise or Standard (trial version) on this PC.
PC#2
====
In this computer it has operating system WindowsME on drive C:
RESULT: When CD (Oracle 8i) was inserted on the CD Drive autorun was performed and Oracle 8i Installation screen pops up and I clicked on install and the Universal Installer shows up. A positive sign but I purposly aborted the installation.
PC#3
====
In this computer it has (2) operating system they are: Windows ME on Partitiion C: and another partition on F: the operating system is Windows2000. I Tried to install it on Windows2000 on partition F:
RESULT: CAN NOT INSTALL (trial version) ORACLE 8I (8.1.7) Enterprise or Standard version on F: Windows2000.
CD drive just spins for 15 seconds and nothing happens not even the Oracle Installation screen shows up.
MY HYPOTHESIS:
=============
The ORACLE 8I (8.1.7) Enterprise or Standard trial version either:
A) Can not be installed on another drive other than C: with a system with two (2) operating systems. and/or
B) Can not be installed with a PC with two (2) operating system.
Ben

New bug of intermedia 8.1.7 for windows 2000

The bug is described as follow:
create table wzy (id varchar2(20),
ctx clob);
create index ctx_index on wzy (ctx)
parameter(...);
During I load those content into ctx column of wzy,when the length of those content is larger than 2038 byte,the system memeroy is eated up;and wher the length of those content is smaller than 2038 byte,system working is ok.
log is as follow:
C:\>ctxsrv -user CTXSYS/manager -personality M
Oracle interMedia Text: Release 8.1.7.0.0 - Production
on Sat May 12 23:40:19 20
01
(c) Copyright 2000 Oracle Corporation. All rights
reserved.
23-40-19 05/12/01 === OCO server startup ===
23-40-19 05/12/01 Initialized CORE
23-40-19 05/12/01 Connected to database.
23-40-20 05/12/01 === Initializing dispatcher ===
23-40-20 05/12/01 === Server startup completed. ===
23-40-22 05/12/01 DML batch: cid=1078
23-40-23 05/12/01 End batch, return code is 0
00-16-15 05/13/01 DML batch: cid=1078
00-16-17 05/13/01 End batch, return code is 0
00-16-49 05/13/01 DML batch: cid=1078
00-41-36 05/13/01 End batch, return code is 1
00-41-37 05/13/01 DRG-10900: out of memory
00-41-37 05/13/01 DRG-10900: out of memory
00-41-37 05/13/01 DRG-50857: oracle error in
drtldml(dml)
00-41-37 05/13/01 ORA-04030: out of process memory
when trying to allocate 65036
bytes (callheap,KQL tmpbuf)
ORA-06508: PL/SQL: could not find program unit being
called
ORA-06512: at "CTXSYS.DRUE", line 113
ORA-06512: at line 1
ORA-06510: PL/SQL: unhandled user
00-41-37 05/13/01 === Server failure ===
00-41-37 05/13/01 DRG-10900: out of memory
00-41-37 05/13/01 DRG-10900: out of memory
00-41-37 05/13/01 DRG-50857: oracle error in
drtldml(dml)
00-41-37 05/13/01 ORA-04030: out of process memory
when trying to allocate 65036
bytes (callheap,KQL tmpbuf)
ORA-06508: PL/SQL: could not find program unit being
called
ORA-06512: at "CTXSYS.DRUE", line 113
ORA-06512: at line 1
ORA-06510: PL/SQL: unhandled user
00-41-37 05/13/01 === Server shutting down ===
the need of memory requirement is up to 1G.
those error as above:
it do not appear in intermedia for solaris.
So,I think it is a new bug of intermedia for windows 2000.
Welcome to talk about the bug to me!

ctxsrv is deprecated in 8.1.7 so please use ctx_ddl.index_sync() for maintaining the index.
Regarding CLOBs there is a bug with NT when the content of the CLOB contains more than 2000 chars. It should be fixed in the 8.1.7 patch release.

Oracle 9.0.1.1.1 For Windows/2000 HTTP server

Similar Messages

Maybe you are looking for