Oracle 9.2.0.1.0 installation problem
Hi,
When i am trying to install 9i version on linux after 17% at copying of file naeet.o installation get stucked.
Please help me for fix this issue.
thanks
Nirav
<snip>
Please let me know complete details so not going to
find any issue while installation of oracle 10G.
Complete details are in the installation guide that comes with the software, and is also available in the complete doc set for your product/version, located at tahiti.oracle.com
I also have few other question hope you can help me
out on that
(1) I have one big production database where uses
working 24*7 and i want to migrate that database with
less downtime than what method i have to use for
migration?
Less downtime than what. Exactly what are your requirements? What is prompting the migration?
Second question is:If my linux system is showing 100%
utilisation than is there any way that temporary i
can take down to 95% or whatever the minimum
utilisation i can take..is there any way to reduce
temporary utilisation?
100% utilization of what resource?
Third is:I have created one db file in tablespace
than after utilisation of datbase get increase so i
want to remove it from system or that table space but
there is heavy transaction is going on that table so
is there any way through which i can remove that
dbfile without data loss and less downtime?
If you added a file to a tablespace, and there is now data in that file, how would you expect to remove the file without loss of data? Why do you want to remove the file?
Similar Messages
-
I'm trying to install the 9.2.0.8 patch on top of my 9.2.0.4 Oracle installation on Fedora 8 OS and I'm not able to get the installer going. After I get the first screen, it displays for the Oracle_HOME screen and when I press next here, I get the following error:
java: xcb_xlib.c:50: xcb_xlib_unlock: Assertion `c->xlib.lock' failed.
If anyone was successful in this installation, please let me know what I have to do to get past this error and get a successful installation.More or less similar problem reported in following thread
Install 11g on Fedora 8? -
Oracle Portal 3.0 for NT installation problems.. HELP!!!
this is what shows up when I try to access my portal page:
Call to WPG_SESSION API Failed.
Error-Code:6550
Error TimeStamp:Wed, 06 Dec 2000 19:09:23 GMT
Database Log In Failed
TNS is unable to connect to destination. Invalid TNS address supplied or destination is not listening. This error can also occur because of underlying network transport problems.
Verify that the TNS name in the connectstring entry of the DAD for this URL is valid and the database listener is running.
Notes:
I'm running Oracle 8.1.6 on a different box then the Portal application. I loaded the Oracle Client on my machine(with Portal). I've gone through the Portal installation instructions many times and I'm almost certain I've configured everything correctly(but obviously not). I've also gone through the Net8 Assistant to see if I can get a connection and can.. I've made sure my db is up by using SQL Plus. Any help would be greatly appreciated.I thought I was out of the woods but have gotten some strange behavior. I'm able to work inside of the Portal application.. then I got this error..
Proxy log On failed.
Please verify that you have specified correct connectivity information i.e.username, password & connect-string in the Database Access Descriptor
Error-Code:12500
Error TimeStamp:Fri, 08 Dec 2000 18:32:38 GMT
Database Log In Failed
TNS is unable to connect to destination. Invalid TNS address supplied or destination is not listening. This error can also occur because of underlying network
transport problems.
Verify that the TNS name in the connectstring entry of the DAD for this URL is valid and the database listener is running.
This is sort of the same thing from before. As soon as it happened I tested things out like:
testing out the Oracle HTTP Server
- Apache
- Jserv (demo)
- modplsql
for connectivity. I'm able to click on the above links and see that they are working. Then I brought down the OracleportalHTTPServer service and restarted.
I then tried to use SQL Plus to test db connectivity using Username: internal Password:xxxx with the service name but it spits back:
TNS:listener failed to start a dedicated server process. It seems no matter who I try and login as using SQL Plus I get the same thing. As I mentioned before I have the db on another machine with the Portal application & Oracle 8.1.6 Client on my machine. I didn't configure anything after I installed the 8.1.6 Enterprise Edition.. I was able to bring up the Portal page with no problems. Am I missing something.. seems very strange that I'm able to work in the application for a bit and then have it die on me.
I jumped onto the machine with my db.. brought down the TNSListener on that end, brought down the db service (OracleServiceXXX)and brought it back up and was able to use SQL Plus on this machine and get a connection to the db. I then got back on my machine, brought down the OracleportalHTTPServer service on my side, brought it back up and used SQL Plus to show a connection to the db. Thoughts?? -
Oracle application 11.5.10.2 installation problem on xp sp2 with cygwin
Hi all,
lam trying to install ORA APPS on xp but the rapidwiz stopped at step 3 and freezed. rapidwiz didn't give me an error while running but didn't continue to step 5 and below part of my log which shows no error unless the connection failed but it continued and connected by another way
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 08-JUL-2007 11:08:19
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCVIS))
The command completed successfully
addlnctl.cmd exiting with status 0
Starting the Listener - cmd /c d:\oracle\visdb\9.2.0\appsutil\scripts\VIS_maher\addlnctl.cmd start VIS
ECHO is off.
ECHO is off.
Sun 07/08/2007 11:08 AM
ECHO is off.
ECHO is off.
Sun 07/08/2007 11:08 AM
VIS_maher.cmd exiting with status 0
ECHO is off.
The environment settings are as follows ...
ECHO is off.
ORACLE_HOME : d:\oracle\visdb\9.2.0
LOCAL : VIS
ORACLE_SID :
PATH : d:\oracle\visdb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\;d:\oracle\visdb\9.2.0\bin;d:\oracle\visdb\9.2.0\jre\1.4.2\bin;d:\oracle\visdb\9.2.0\jre\1.4.2\bin;h:\11istart\Disk1\rapidwiz\bin;C:\cygwin\bin;C:\Perl\site\bin;C:\Perl\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
LD_LIBRARY_PATH : d:\oracle\visdb\9.2.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
"d:\oracle\visdb\9.2.0\appsutil\log\VIS_maher\addlnctl.txt"
ECHO is off.
ECHO is off.
Starting listener process VIS ...
ECHO is off.
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 08-JUL-2007 11:08:20
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCVIS))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=maher.home)(Port=1521))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 08-JUL-2007 11:08:21
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production
System parameter file is d:\oracle\visdb\9.2.0\network\admin\VIS_maher\listener.ora
Log messages written to d:\oracle\visdb\9.2.0/network/admin\vis.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCVISipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=maher.home)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCVIS))
STATUS of the LISTENER
Alias VIS
Version TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production
Start Date 08-JUL-2007 11:08:21
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security OFF
SNMP OFF
Listener Parameter File d:\oracle\visdb\9.2.0\network\admin\VIS_maher\listener.ora
Listener Log File d:\oracle\visdb\9.2.0/network/admin\vis.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCVISipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=maher.home)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "VIS" has 1 instance(s).
Instance "VIS", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
addlnctl.cmd exiting with status 0
Please refer to the remaining logs on middle tier at - d:\oracle\visappl\admin\VIS_maher\log\07080913.log
and this is the last part of (07080913.log) log
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>set JAVA_LOC=d:\oracle\visora\iAS\appsoui\jre\1.3.1\bin\java
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>set JAVA_CLASSPATH=d:\oracle\visora\iAS\appsoui\oui\lib\OraInstaller.jar;d:\oracle\visora\iAS\appsoui\oui\lib\xmlparserv2.jar;d:\oracle\visora\iAS\appsoui\oui\lib\ewt.jar;F:\Stage11i\startCD\Disk1\rapidwiz\jlib\java
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>d:\oracle\visora\iAS\appsoui\jre\1.3.1\bin\java -Doracle.installer.oui_loc=d:\oracle\visora\iAS\appsoui\oui -mx600M -classpath d:\oracle\visora\iAS\appsoui\oui\lib\OraInstaller.jar;d:\oracle\visora\iAS\appsoui\oui\lib\xmlparserv2.jar;d:\oracle\visora\iAS\appsoui\oui\lib\ewt.jar;F:\Stage11i\startCD\Disk1\rapidwiz\jlib\java oracle.apps.ad.clone.util.OracleHomeCloner -registerOUI -ohPath d:\oracle\visora\iAS -ohName APPSIAS_VIS -oraInstLoc "c:\Program Files\Oracle\Inventory"
Log file located at c:\Program Files\Oracle\Inventory\logs\OracleHomeCloner_07081128.log
and this is the cloner log
Registering local Oracle Home located at d:\oracle\visora\iAS to central oracle inventory
Registering the OUI component....
Checking for d:\oracle\visora\iAS\appsoui\oui
d:\oracle\visora\iAS\appsoui\oui FOUND
Verifying OUI Component Version
OUI Component Version is 2.2.0.19.0
OUI Component Version is greater then 2.2
OUI Component registration needed
Registering OUI Component successful
ORACLE_HOME d:\oracle\visora\iAS was registered successfully.
I noticed later an error says java version is incorrect, I installed java 1.6 before I installed oracle apps is this correct?
regards
MaherI noticed later an error says java version is incorrect,
I installed java 1.6 before I installed oracle apps is this correct?Rapid Install installs the Java 2 Standard Edition 1.4.2 automatically for systems running on Solaris, Linux, or Windows operating systems. So, you do not have to install any JDK/J2SE before starting the installation.
Also, make sure you have a valid entry in the hosts file and you can ping the IP address as well as the hostname. -
Oracle VM Server (3.2.3) installation problem on Sun X3-2
Dear All Experts,
I have 2 hard disks and configure as RAID1, than create 2 virtual drives for OS (40GB) and Local Storage Repository (250GB) already.
During VM Server installation, I saw 3 drives (a, b, c) and I don't know why drive C is created automatically?
drive A: OS = 40GB, file system: ext3
drive B: Storage Repository = 250GB, file system: ext3
drive C: 3GB, file system: vfat
I have to delete this drive C or not? if delete, it affect to system or not? how to delete it?
your help is so appropriate.
Thanks and regards,
HengDear All,
Any update for this issue?
I have 2 virtual drives when I install OVM Server 3.2.3, I see 3 drives is C one more. Please check and give advice as below:
root@ovmserver ~]# fdisk -l | more
Disk /dev/sda: 42.9 GB, 42949672960 bytes
255 heads, 63 sectors/track, 5221 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 1305 10482381 83 Linux
/dev/sda2 1306 5221 31455270 82 Linux swap / Solaris
Disk /dev/sdb: 256.0 GB, 256049676288 bytes
255 heads, 63 sectors/track, 31129 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
Disk /dev/sdc: 3880 MB, 3880452096 bytes
120 heads, 62 sectors/track, 1018 cylinders
Units = cylinders of 7440 * 512 = 3809280 bytes
Device Boot Start End Blocks Id System
Disk /dev/dm-0: 256.0 GB, 256049676288 bytes
255 heads, 63 sectors/track, 31129 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id
Please kindly give advice for this. your help is so appreciate.
Thanks and regards,
Heng -
Oracle Dev/2000 6.0 EAP Installation PROBLEM !!!
Oralce EAP kit Dev/2000 6.0 CD gives while installing on Win'95.
But still the Dev. works , some time gives more problems, Please
Let me has anybody has same problem while installing
nullshabie wrote:
Good question! When I tried running that (unfortunately I am not in front of the same system right now) the command, it did NOT execute successfully. The error was... shoot I cant remember. Need to go back and check but it was definitely not working not with -c or -u option. As far as I remember (I dont remember much) the -u option automatically entered system/********** which did not succeed. The -c option gives the option of entering username/password but I didnt know what to enter. I tried entering <SID>adm/password but that did not work.
>
> However, sqlplus / as sysdba in the "run" dialog box of windows worked perfectly.
>
> Even R3trans didnt show any errors in checking the connection with the database.
>
> Shoot! I guess, the errors in the commands were important. Damn, I'll go home, check and post later? Any ideas till then if my memory is to be trusted?
Hi,
>> The -c option gives the option of entering username/password but I didnt know what to enter.
"-c" means that brconnect does not require a confirmation during the process
>> As far as I remember (I dont remember much) the -u option automatically entered system/********** which did not succeed.
"-u /" means that brconnect will connect to the database with OPS$ mechanism.
At this stage, could you download and patch latest br*tools from SAP Marketplace?
Best regards,
Orkun Gedik -
Installation problem on Linux Slackware 7.1 (Oracle 8i)
I try install Oracle 8i Enterprise in Linux Slackware 7.1 (kernel 2.2.16), but the runInstaller don't work.
I read the installation manuals and make all steps, but the runInstaller don't work.
I get this message:
./runInstaller
The Java RunTime Environment was not found at bin/jre. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.1.8 or higher and try again.
: No such file or directory
I try --> ln -s /usr/local/jre118_v3 /usr/local/java
and --> ln -s /usr/local/jre118_v3 /usr/local/jre
and put in PATH --> /usr/local/jre/bin
Nothing work's.
Somebody can help me ?????
Thank's ....Hello!
I also tried to install Oracle 8.1.6.1 (after giving up the 8.0.5 installation due to segmentation faults all over..), it also failed.
After trying to install Oracle 8.1.6.1 on RedHat 7.0 and it still crashed, i sent a mail to some guru that wrote the oracle-how-to document for redhat, here is what he replied.
My guess is that this also applies to the newest slackware version, because i presume that slackware 7.0 also use the newest glibc libraries;
Thanks for the feedback.
Oracle 8.1.6 does not work under Red Hat >Linux 7. Yes, that's the problem
that I mentioned in the doc--you get to 80% >and the DBCA crashes and the
Oracle executables die.
I've heard, but I haven't tried it myself, >that if you install the latest
glibc errata (2.1.94) then the DBCA >completes but the Oracle executables
still die. The DBCA problem was apparently >a Java issue that is fixed in
the errata. But you're still out of luck >since the exes won't work.
It might appear that this is a problem with >Red Hat Linux 7. But it appears
that it is a problem with some assumptions >that Oracle made, assumptions
that worked with glibc 2.1.3 (the C library >included with RHL 6.2) but which
prove false with later glibc versions. As >other Linux distributions adopt
the new glibc Oracle will fail to work on >them as well.
The best advice I can give at this point is >to install and run Oracle on
Red Hat Linux 6.2. Hopefully Oracle will >address the glibc issues with the
8.1.7 release.
ChrisI then installed Orace on RedHat 6.1 and it worked like a dream.
Maybe you guys should try your luck on an earier version of slackware?
Hope that helped...
null -
Oracle database 11g release 2 installation problem on windows 7 (64-bit)
First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges -
Oracle 8.1.7 installation problem on HP-UX
Here is my set-up:
#uname -a
HP-UX hostname B.11.11 U 9000/810
#getconf KERNEL_BITS
32
Problem:
I am installing Oracle 8i Enterprise Edition using Typical
Installation Type.
At the 73% progress bar status, the installation process gets
stuck. The installActions.log has the ff:
Starting install install Phase 1 of component Oracle Advanced
Security
Starting install install Phase 1 of component Oracle Starter
Database
Calling action file Actions 1.7.1.7.0 final Cluster Setup
selected Nodes =
threads Active = 2
vector Initial Size = 50
vector Factor Size = 25
On the Oracle Universal Installer GUI, I have the ff:
Installing Oracle Starter Database 8.1.7.0.0
Link pending...
Copying README_aso.txt
The process gets stuck at 73% and doesn't progress from there.
Any suggestions/patches needed? How can I prevent the Oracle
Starter Database from installing? Is this an option?
Thank you.Intel says there is a bug in oracle's OUI as well other swing based programs. The solution is to copy the CD to local drive and add -nojit as first parameter to JRE_MEMORY_OPTIONS e.g. JRE_MEMORY_OPTIONS="-nojit -mx32m"
This will enable OUI to run. Even after installing oracle Net80 conf. asst won't start due to same reason.
Go to HOME\admin\tools\ and edit netca.cl and netasst.cl to add same -nojit before -classpath.
Do this for every tool that gives this prob such DBA studio...
Ashish -
Oracle 10g XE installation problem on Ubuntu Linux, Oracle will not start
Hi,
After installing the pakages the error is when I call sqlplus and login as SYS :-
oracleXE: error while loading shared libraries: libaio.so.1: cannot open shared object file: No such file or directory
ERROR:
ORA-12547: TNS:lost contact
What I have done:-
My system is 64 bit AMD.
I installed .deb package on Ubuntu 9.04 server. I installed the following packages.
1. ibc6-i386
2. libaio_0.3.104-1_i386.deb
3. bc
4. oracle-xe-universal_10.2.0.1-1.1_i386.deb.
The Oracle processes do not start after running /etc/init.d/oracle-xe start.
I can tnsping from the local machine.
dpkg -l |grep libaio gives the following:
ii libaio1 0.3.107-3ubuntu1 Linux kernel AIO access library - shared libI have been running XE on 9.04 (32bit on my laptop - 64bit on my workstation) and both works fine. I had no problem installing. I followed the directions in documents I found on Ubuntu forums and also google. The document I used to install on 64bit was from http://littlebrain.org
I remember using
dpkg -i --force-architecture libaio1_0.3.107-1ubuntu1_i386.deb
dpkg -i --force-architecture libaio-dev_0.3.107-1ubuntu1_i386.deb
dpkg -i --force-architecture libaio1-dbg_0.3.107-1ubuntu1_i386.deb
dpkg -i --force-architecture oracle-xe_10.2.0.1-1.0_i386.deb
and then I used the ./oracle-xe configure as root, the installation was ok - and I have even updated the APEX version to 3.2.1 on the XE installation running on my 64bit Ubuntu 9.04
hope this proves useful
R/ Zafer -
Installation problem oracle 11g R2 on oracle enterprise linux 5 update 5
hello support,
i've installation problems with oracle 11g R2 on oracle enterprise linux 5 update 5. In the section "ORACLE Net-Konfigurationsassisten" the failure "[INS-20802] Oracle NET-Konfigurationsassistent not success". What's wrong? I've followed the instructions on http://www.oracle.com/technology/pub/articles/smiley-11gr1-install.html
I've heard the problem can occur with problems in /etc/hosts? My /etc/hosts is configured:
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 oracle localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
is this ok? what can I do to bring the database-installation to success?
Thank's for help ;-)
Edited by: user5782904 on 09.05.2010 14:06Here I paste you the configuration of my latest linux box which has a similar environment like yours.
# hostname
vmrhel6032.quist.ch
# domainname
(none)
# cat /etc/hosts
192.168.1.205 vmrhel6032 vmrhel6032.quist.ch
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=vmrhel6032.quist.ch
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
HWADDR=00:0C:29:6A:98:70
ONBOOT=yes
NETWORK=192.168.1.0
NETMASK=255.255.255.0
IPADDR=192.168.1.205
#Thanks to your post I noted that the hostname consist already of my domain entry. Try your configuration first without domain entry. It should look like:
# hostname
vmrhel6032
# domainname
(none)
# cat /etc/hosts
192.168.1.205 vmrhel6032
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=vmrhel6032
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
HWADDR=00:0C:29:6A:98:70
ONBOOT=yes
NETWORK=192.168.1.0
NETMASK=255.255.255.0
IPADDR=192.168.1.205
#Otherwise use the first example and don't forget to restart your server resp. the network service. ;) -
Installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system
We are having installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system.
Using interface, when installation come up to “Installing Wizard” window where Gateway Name Server Configuration window should take place, everything just freeze up
Using console, after installation we obtain following errors:
Installing Siebel Enterprise Server. Please wait...
unable to launch: "ksh export
LD_LIBRARY_PATH=/siebel/gtwysrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/gtwysrvr/bin/setup.jar run -args LANG=ENU
MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm" error code:
"236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/bin/setup.jar run -args LANG=ENU
REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebsrvr/admin/siebel_server.scm"
error code: "236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/mgmtagent/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/mgmtagent/bin/setup.jar run -args
LANG=ENU MODE=LIVE
MODEL_FILE=/siebel/siebsrvr/mgmtagent/admin/mgmtagent_ses.scm" error code:
"236"(SBL-STJ-00152)
Running command :
./ssincfgw -is:javaconsole -console -args LANG=ENU MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm
Infinite loop of following error pops out:
An error occurred during wizard bean change notification:
java.lang.NoClassDefFoundError
at ConfigInitialize.execute(ConfigInitialize.java:21)
at com.installshield.wizard.StandardWizardListener.execute(StandardWizardListener.java:123)
Is there any clue how this error can be solved??
Thanks in advance!!
Gordon
Message was edited by:
user605023I'm facing the same error message while install Siebel 8.0 on OEL. But before I had this ksh problem, it complains about disc space first, and I actually has plenty of disk space under the directory (it needs only 0.7 G and I have 17G free). Anybody has encountered such problem before?
/net/sdcnas05/vol/engfs01/v_sia/8.0SIA[20405|http://forums.oracle.com/forums/]/Release/Linux/Server/Siebel_Enterprise_Server
-bash-3.00$ ./setuplinux -is:javaconsole -console
Initializing InstallShield Wizard........
Initializing InstallShield Wizard........
Launching InstallShield Wizard........
0% 25% 50% 75% 100%
Welcome to the InstallShield Wizard for Siebel Enterprise Server
The InstallShield Wizard will install Siebel Enterprise Server on your
computer.
To continue, choose Next.
Siebel Enterprise Server
Siebel Systems
Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]
Siebel Enterprise Server Install Location
Please specify a directory or press Enter to accept the default directory.
Directory Name: [siebel] /slot/ems1115/appmgr/20405
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the products you wish to install.
[ ] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 1
[X] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 2
[X] 1 - Gateway Name Server
[X] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]:
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Configuring uninstallers. Please wait...
0% 25% 50% 75% 100%
Choose the setup type that best suits your needs.
[X] 1 - Typical
[ ] 2 - Compact
[ ] 3 - Custom
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the languages you wish to install.
[X] 1 - enu - English (American)
[ ] 2 - fin - Finnish
[ ] 3 - kor - Korean
[ ] 4 - cht - Chinese (Traditional)
[ ] 5 - ita - Italian (Standard)
[ ] 6 - esn - Spanish (Modern)
[ ] 7 - deu - German (Standard)
[ ] 8 - chs - Chinese (Simplified)
[ ] 9 - tha - Thai
[ ] 10 - dan - Danish
[ ] 11 - heb - Hebrew
[ ] 12 - fra - French (Standard)
[ ] 13 - nld - Dutch (Standard)
[ ] 14 - ptb - Portuguese (Brazilian)
[ ] 15 - csy - Czech
[ ] 16 - jpn - Japanese
[ ] 17 - ptg - Portuguese (Standard)
[ ] 18 - ara - Arabic (Sa`udi)
[ ] 19 - sve - Swedish
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
{color:#ff0000}*Drive "/slot/ems1115/appmgr/20405" does not have enough space to install the*
selected configuration. Please free up "766446" KB on drive
*"/slot/ems1115/appmgr/20405" before continuing.*{color}
-bash-3.00$ pwd
/slot/ems1115/appmgr/20405
-bash-3.00$ df -h .
Filesystem Size Used Avail Use% Mounted on
sdc1002nap-vlan1:/vol/ems_39426_1115
71G 55G 17G 77% /slot/ems1115 -
Oracle 8.0.5 Post Installation Problem
Hi all,
I have installed Oracle 8.0.5.1 is installed on my RH 6.0 box.
However, I am running into a couple of post-installation
problems.
1. root.sh (sucessfully ran).
2. glibc patch (successfuly ran). There were a few errors on the
screen with the "mv" commands (file does not exist). Is tha
alright?
3. catrep.sql (problem). This is where I have a problem.
I ran dbstart as oracle805 (installation account), but I have no
idea whether or not I really started the database. ps -aux did
not yield any clue.
I also tried svrmgrl and "startup", but the file "initXXX.ora"
did not exist, so I copied the existing "init.ora" to
"initXXX.ora". XXX is my ORACLE_SID. Instead alert_XXX.log gave
me the following:
ORA-00202: controlfile: 'ora_control1'
ORA-27037: unable to obtain file status
So, in other words, I have no idea whether or not I have
successfully installed Oracle. All insights are greatly
appreciated.
Thanks a bunch...
Anh
nullPhan Anh Tran (guest) wrote:
: Hi all,
: I have installed Oracle 8.0.5.1 is installed on my RH 6.0 box.
: However, I am running into a couple of post-installation
: problems.
: 1. root.sh (sucessfully ran).
: 2. glibc patch (successfuly ran). There were a few errors on
the
: screen with the "mv" commands (file does not exist). Is tha
: alright?
: 3. catrep.sql (problem). This is where I have a problem.
: I ran dbstart as oracle805 (installation account), but I have
no
: idea whether or not I really started the database. ps -aux did
: not yield any clue.
: I also tried svrmgrl and "startup", but the file "initXXX.ora"
: did not exist, so I copied the existing "init.ora" to
: "initXXX.ora". XXX is my ORACLE_SID. Instead alert_XXX.log
gave
: me the following:
: ORA-00202: controlfile: 'ora_control1'
: ORA-27037: unable to obtain file status
: So, in other words, I have no idea whether or not I have
: successfully installed Oracle. All insights are greatly
: appreciated.
: Thanks a bunch...
: Anh
Hei !
I also did this fault :-( See this webpage - it's excellent
and describes everything.
http://jordan.fortwayne.com/oracle/rh6x.html
null -
Installation problems in MSCS ORACLE 10.2 ECC 6.00
I am writing to report some unexpected installation problems. I am installing SAP ECC 6.00 in a MSCS cluster environment (Windows 2003 / Oracle 10.2) in our production environment and I am having problems during the installing the central instance phase. The sapinst_dev shows the following error: CJS-30102 Checking the database for installation type failed, Also the jsourcecheck.log shows the following error: com. sap. engine. frame. core. configuration. Configuration Exception: Error while connecting to DB and java. sql. SQLException: Excepción de E/S: The Network Adapter could not establish the connection at oracle. jdbc.driver. DatabaseError. throwSqlException (DatabaseError.java:112)
The database is currently running without any problem and all the services (SAP and Oracle) as well.
Following the installation guide, I performed the almost all the steps successfully:
Oracle RDBMS, patches and Oracle fail safe software on both nodes (successfully)
Install the central services instance for ABAP (ASCS) on the first MSCS node (successfully)
Install the central services instance (SCS) on the first MSCS node (successfully)
Cluster the first MSCS node (successfully)
Install the database instance on the first MSCS node (successfully)
Cluster the additional MSCS node (successfully)
Install an enqueue replication server(successfully)
Perform additional steps for the Oracle Fail Safe configuration (successfully)
Create the Oracle Fail Safe group (successfully)
Set up as shared database directory in your Oracle Home (successfully)
Add the Oracle database resource to the Fail Safe group (successfully)
install the central instance (Failed)
install at least one dialog instance (not installed yet)
As you can observe, I have performed the create oracle fail safe group activity first and then the install the central instance later. Reading the sap note 967121 today, I just realized that there is a wrong installation sequence; the sap note 967121 (actualized date: 17/OCT/07 ) says that you must install the central instance before you create the Oracle Fail Safe group. Is this sequence compulsory? Or can I continue the installation process?
If this sequence is compulsory do I have to reinstall all the predecessor activities or should I undo just the create oracle fail safe group activity?
Please let me know if the error which is showed in the installation of the central instance phase is because the wrong sequence or it is due to another reason.
Our cluster configuration is:
4 network card
Public network cards:
Ip:192.168.2.240 (hostname: ccaribe3rp1, Node A)
Ip: 192.168.2.241 (hostname: ccariber3p2, node B)
Private network cards:
Ip: 10.10.10.1 (hostname: ccaribe3rp1.ceramicascaribe.com, node A
Ip: 10.10.10.2 (hostname: ccaribe3rp2.ceramicascaribe.com, node B
Clustergroup:
Cluster group name: SAPPRO
Cluster group Virtual IP: 192.168.2.239, network name: SAPPRO (subnet mask 255.255.255.0)
SAP cluster group:
Sap clustergroup virtual IP: 192.168.2.238, network name: sapgrp (subnet mask 255.255.255.0)
Database cluster group:
Database cluster group virtual Ip: 192.168.2.237, network name: dbgrp (subnet mask: 255.255.255.0)
We have performed the mapping of the host names to the IP addresses on the windows host file already.
I would be very grateful if someone kindly can help me to solve this problem.
Best Regards
Boris RomeroHello Boris,
one of the main problems is that step
"Create the Oracle Fail Safe group (successfully)"
cannot be successful because you need to run configtool and change the secure store as described in installation guide. At this stage the configtool does not exists (documentation error for ECC6.0 guide), so the correct sequence is to install CI and cluster the DB, but not vice versa.
Which stage is the sapinst braking up?
Is this beginning, middle or end of installation?
Did you try to run configtool and modify secure store?
best regards -
Installation Problems with Oracle 8i and Win98
Yesterday I tried installing Oracle 8i Personal Edition from CD. I completed installation up to "Database Creation in Progress", initializing phase. It stuck at 85%. The CD did not make any noise, and it stayed at 85% for 53 minutes.
Today, I downloaded Oracle 8i. It unzipped with no problem. I uninstalled, then tried to install. I got numerous .dll file errors in writing to file c.
The CPU is 500mz, 128 S-DRAM PC-133 Memory, there is 32 gig free on hard drive, Browser is IE Ver.5.5, O/S is Win 98.
Thank you
So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name
- Filename - psoracle81798
- Date/Time 02/08/02 10:05 am EST
- Browser + Version - I.E. Ver 5.5
- O/S + Version WIN98
- Error Msg: Error in writing to file CChange Compiler to egcs 1.1.2-24.
Try again.
Maybe you are looking for
-
Extract the data from SQL Server and Import into Oracle
Hi, I would like to run a daily job that will export the table data from SQL server table (it will be only one or two table) and Import back into Oracle table (it might one or two table tables). Could you please guide me that how can i do this using
-
Skype Number is always busy...
I'm experiencing problems with Skype Numbers in Brazil, code 5511 3042 - São Paulo. My Skype Number is always busy! I've tried change at preferences, it was working, but now the all day is busy....
-
How do I install the complimentary PDF Portfolio Templates for Acrobat XI
I download the complimentary PDF Portfolio Templates. How do I install them to Acrobat XI?
-
Why am I seeing multiple copies of my sent messages (in Trash)?
Why are my sent emails multiplying in the Trash mailbox?
-
What happen when we connect Two PC with IP from Same subnets
Scenario 2nd : What happen when we connect Two PC with IP from Same subnets. PC1 -192.168.10.1/24 PC2 - 192.168.10.2 on a two different L2 Switch on different vlans which are connected via a LAN cable. All ports are access ports Interview Question :