Oracle 9.2.0.1.0 Installation

Hi Friends,
I am also installing Oracle 9.2.0.1.0 on IBM-AIX version 4.3.3 on RS/6000 m/c.
Is it possible to install (Oracle 9.2.0.1.0 for IBM-AIX version 5.1) on IBM-AIX version 4.3 .
M/C is RS/6000 and 64 bit.
Will it give any differences in the kernal level between 4.3 and 5.1.
Is it possible to install like Oracle9.2 on Windows2000/NT/XP.
Or can any one give me the site for good references.
Could any on help ...
Thanks in advaance
gandhi
OCP8-DBA

How did you config your system. That is the virtual memory, you machine name prefix and the etc/host where you provide your IP address and your machine name alias. This must be config correctly for your installation to succeed. The virtual memory must be up to 400MB.

Similar Messages

Multiple Oracle Homes - Oracle Listener failes to start after installation

Just in case the listener fails to start after an oracle installation, please check the oracle ports in the listener.ora and tnsnames.ora, both of which are present in the following directory:
...\oracle\<SID>\<Ver>\NETWORK\ADMIN
All installations should have separate listener ports eg. If the first installation has port 1527, the next one should be 1528 and so on..
If they do not, manually change the ports and start the listeners.
Also check SAP Note 98252. Although I didn't find it necessary (I think it applies only if you have a single listener for all oracle homes), it did give me an idea that there some config problem in the .ora files.
Also see [this thread|Oracle Listener error in Import ABAP phase?; for related details

hi
thanks for the help ,
I have been using the SQL Server , i am totally blank about Oracle
i am totally confused with this user, and hoststring
i logged in to the enterprise manager using System and manager password
But i cannot connect to any database using SQL Server
i am not remembering any user name or password i have given during installation.
the only thing i remember is
Global databasename = (globedb) i have given
For SID = globedb the same name i have given
for sys ,i have given sysdb as password
and for system i have given systemdb as password
with this can i do anything
when expand the schemas ,i can see the XDB,SCOTT and SYS . how can i login to this .
if i want to login to the scott
what would be the username,password,and hoststring. since i haven't set any password and username ,there would be some default username ,password, and hoststring.
if any one can help me please help me
thanks regards

Oracle 9.2.0.1.0 Installation on IBM AIX 5L platform

I have a problem with the installation of Oracle 9.2.0.1.0 in AIX
After I have followed the required steps in the installation guide, finally I run
./runInstaller
But this command stops the installation at some point, giving an error telling that the value of DISPLAY parameter is not authorized by the server.
To the display parameter I have put the name of the server trying it even with IP address and also appending :0.0
But I cannot figure out why installation doesn't work
If you could help me respondonding my question or either with any doc's about oracle 9.2.0.1.0 installation over AIX version 5, it would be very helpful to me
Thank you for your time

You have an access problem (X-Windows) on the machine, you are calling runInstaller. Try 'xhost +' or 'xhost servername'.

Oracle 11.2.0.2.0 installer for download...

Hi All,
I want to install oracle 11.2.0.2.0 in to my environment but I dont find any installer on oracle website.
can anyone suggest me from where I get this installer? or there is no installer yet published by oracle and only patchset is available for 11.2.0.2.0?
Thanks in advance..

To 11.2.0.2 you need to download Patchset 10098816 from My Oracle Support.
Starting with the first patch set for Oracle Database 11g Release 2 (11.2.0.2), Oracle Database patch sets are full installations of the Oracle Database software. In past releases, Oracle Database patch sets consisted of a set of files that replaced files in an existing Oracle home.
From 11.2.0.2 on-wards you can either go for in-place upgrade or out of place upgrade. out-of-place is the recommended method .
Refer to following documents
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) Note 169706.1
Important Changes to Oracle Database Patch Sets Starting With 11.2.0.2 (Doc ID 1189783.1)
Regards

Oracle 10g discoverer and report services installation issue

Hi
Could some one help me in finding the solution for the problem while installing oracle 10g discoverer and report services installation ..
at configuration assistants the opmn configuration failed..
could some one suggest the possible solution for this problem.
thanks

at configuration assistants the opmn configuration failed..additional clues may exist within log file.
Edited by: sb92075 on Aug 29, 2010 7:19 PM

Oracle Financial Services Balance Sheet Planning Installables

Hi Everyone
Can anyone let me know where can we find Oracle Financial Services Balance Sheet Planning Installables (Software to install)
I am not able to find in
Oracle e delivery -> Oracle enterprise management
Can you please navigate me to that software
Thanks in advance

Hi John,
Thanks for the quick reply
I have gone through the guide
BSP will not work in Windows Environment ?
I have installed and configured Hyperion Planning 11.1..2.3 .500 , But not able to find Hyperion PS3 bundles BSP 6.1 files
In guide its mentioned like this
Installation of BSP 6.1 on Hyperion Planning PS3
Hyperion PS3 bundles BSP 6.1 files. Installing Hyperion will only deploy the
BSP files. BSP needs to be subsequently “initialized” in order to access it.
If CAPEX and/or WORKFORCE applications are required, initialize CAPEX and/or
WORKFORCE after BSP initialization is complete.
Note: For PS3, sequence of initialization to be BSP, CAPEX, and then
WORKFORCE.
Thanks

Oracle 10.2.0.2 g Installation Guide

Could you please get me a Oracle 10.2.0.2 g Installation Guide
Best Regards

If you want to install "just Oracle" then go for http://technet.oracle.com
If you want to install a SAP system use the installation guides at http://service.sap.com/instguides.
Markus

Oracle 8i on windows terminal server(installation probs.)

-->>oracle 8i installation in terminal server.
i have termianal server client window.
and i am doing remote installation of oracle 8i from client window.
the installation completes copying all files but
when comes for net8configuration and database assistant..
screen gets hang..i mean that service become hang..
like in database creation assistant ..it is not going above 0%.
what to do?
using any other remote viewer will solve this probs?
regards

If you got answer please let me know. I got stock in same place for my Production installation.
[email protected]

Oracle application 11.5.10.2 installation problem on xp sp2 with cygwin

Hi all,
lam trying to install ORA APPS on xp but the rapidwiz stopped at step 3 and freezed. rapidwiz didn't give me an error while running but didn't continue to step 5 and below part of my log which shows no error unless the connection failed but it continued and connected by another way
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 08-JUL-2007 11:08:19
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCVIS))
The command completed successfully
addlnctl.cmd exiting with status 0
Starting the Listener - cmd /c d:\oracle\visdb\9.2.0\appsutil\scripts\VIS_maher\addlnctl.cmd start VIS
ECHO is off.
ECHO is off.
Sun 07/08/2007 11:08 AM
ECHO is off.
ECHO is off.
Sun 07/08/2007 11:08 AM
VIS_maher.cmd exiting with status 0
ECHO is off.
The environment settings are as follows ...
ECHO is off.
ORACLE_HOME : d:\oracle\visdb\9.2.0
LOCAL : VIS
ORACLE_SID :
PATH : d:\oracle\visdb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\;d:\oracle\visdb\9.2.0\bin;d:\oracle\visdb\9.2.0\jre\1.4.2\bin;d:\oracle\visdb\9.2.0\jre\1.4.2\bin;h:\11istart\Disk1\rapidwiz\bin;C:\cygwin\bin;C:\Perl\site\bin;C:\Perl\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
LD_LIBRARY_PATH : d:\oracle\visdb\9.2.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
"d:\oracle\visdb\9.2.0\appsutil\log\VIS_maher\addlnctl.txt"
ECHO is off.
ECHO is off.
Starting listener process VIS ...
ECHO is off.
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 08-JUL-2007 11:08:20
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCVIS))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=maher.home)(Port=1521))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 08-JUL-2007 11:08:21
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production
System parameter file is d:\oracle\visdb\9.2.0\network\admin\VIS_maher\listener.ora
Log messages written to d:\oracle\visdb\9.2.0/network/admin\vis.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCVISipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=maher.home)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCVIS))
STATUS of the LISTENER
Alias VIS
Version TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production
Start Date 08-JUL-2007 11:08:21
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security OFF
SNMP OFF
Listener Parameter File d:\oracle\visdb\9.2.0\network\admin\VIS_maher\listener.ora
Listener Log File d:\oracle\visdb\9.2.0/network/admin\vis.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCVISipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=maher.home)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "VIS" has 1 instance(s).
Instance "VIS", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
addlnctl.cmd exiting with status 0
Please refer to the remaining logs on middle tier at - d:\oracle\visappl\admin\VIS_maher\log\07080913.log
and this is the last part of (07080913.log) log
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>set JAVA_LOC=d:\oracle\visora\iAS\appsoui\jre\1.3.1\bin\java
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>set JAVA_CLASSPATH=d:\oracle\visora\iAS\appsoui\oui\lib\OraInstaller.jar;d:\oracle\visora\iAS\appsoui\oui\lib\xmlparserv2.jar;d:\oracle\visora\iAS\appsoui\oui\lib\ewt.jar;F:\Stage11i\startCD\Disk1\rapidwiz\jlib\java
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>d:\oracle\visora\iAS\appsoui\jre\1.3.1\bin\java -Doracle.installer.oui_loc=d:\oracle\visora\iAS\appsoui\oui -mx600M -classpath d:\oracle\visora\iAS\appsoui\oui\lib\OraInstaller.jar;d:\oracle\visora\iAS\appsoui\oui\lib\xmlparserv2.jar;d:\oracle\visora\iAS\appsoui\oui\lib\ewt.jar;F:\Stage11i\startCD\Disk1\rapidwiz\jlib\java oracle.apps.ad.clone.util.OracleHomeCloner -registerOUI -ohPath d:\oracle\visora\iAS -ohName APPSIAS_VIS -oraInstLoc "c:\Program Files\Oracle\Inventory"
Log file located at c:\Program Files\Oracle\Inventory\logs\OracleHomeCloner_07081128.log
and this is the cloner log
Registering local Oracle Home located at d:\oracle\visora\iAS to central oracle inventory
Registering the OUI component....
Checking for d:\oracle\visora\iAS\appsoui\oui
d:\oracle\visora\iAS\appsoui\oui FOUND
Verifying OUI Component Version
OUI Component Version is 2.2.0.19.0
OUI Component Version is greater then 2.2
OUI Component registration needed
Registering OUI Component successful
ORACLE_HOME d:\oracle\visora\iAS was registered successfully.
I noticed later an error says java version is incorrect, I installed java 1.6 before I installed oracle apps is this correct?
regards
Maher

I noticed later an error says java version is incorrect,
I installed java 1.6 before I installed oracle apps is this correct?Rapid Install installs the Java 2 Standard Edition 1.4.2 automatically for systems running on Solaris, Linux, or Windows operating systems. So, you do not have to install any JDK/J2SE before starting the installation.
Also, make sure you have a valid entry in the hosts file and you can ping the IP address as well as the hostname.

Oracle 9.2.0.8 patch installation problem on top of 9.2.0.4 installation

I'm trying to install the 9.2.0.8 patch on top of my 9.2.0.4 Oracle installation on Fedora 8 OS and I'm not able to get the installer going. After I get the first screen, it displays for the Oracle_HOME screen and when I press next here, I get the following error:
java: xcb_xlib.c:50: xcb_xlib_unlock: Assertion `c->xlib.lock' failed.
If anyone was successful in this installation, please let me know what I have to do to get past this error and get a successful installation.

More or less similar problem reported in following thread
Install 11g on Fedora 8?

On RHEL 5.7, Oracle 11.2.0.3 Client installation error

Hello Friends,
I am getting below error while installing Oracle 11gR2 client on a RHEL5.7 Machine. After I finished the installation by silent mode whenever I am launching the sqlplus /nolog command
sqlplus: error while loading shared libraries: libclntsh.so.11.1: cannot open shared object file: No such file or directory
whereas I guess the settings in .bash_profile seems ok. Please validate:
[oracle@localhost ~]$ cat .bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
        . ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
export ORACLE_BASE=/u01/oracle
export ORACLE_HOME=/u01/oracle/oraapp
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
export PATH=/u01/oracle/oraapp/bin:$PATH
I checked metalink where It is said that this could be because of RPM, ID 1329085.1
Also please find the gcc details:
[oracle@localhost ~]$ gcc -v
Using built-in specs.
Target: x86_64-redhat-linux
Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --enable-checking=release --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-libgcj-multifile --enable-languages=c,c++,objc,obj-c++,java,fortran,ada --enable-java-awt=gtk --disable-dssi --disable-plugin --with-java-home=/usr/lib/jvm/java-1.4.2-gcj-1.4.2.0/jre --with-cpu=generic --host=x86_64-redhat-linux
Thread model: posix
gcc version 4.1.2 20080704 (Red Hat 4.1.2-51)
Any help on this problem would be really nice
-Regards,
J_DBA

Also I got below thing in LOG of silent Installation
filename = /u01/oracle/oraapp/opmn/bin/onsctl
INFO: Query Returned: true
INFO: Setting up 'HAS Common Files 11.2.0.3.0 '
INFO: Setting up 'HAS Common Files 11.2.0.3.0 '
INFO: 7/16/13 5:39:21 PM IST: Starting install Install Phase 2 of component HAS Common Files
INFO: component has plugIns in XML: no configlog.xml written
INFO: Setting up 'SQL*Plus Required Support Files 11.2.0.3.0 '
INFO: Setting up 'SQL*Plus Required Support Files 11.2.0.3.0 '
INFO: 7/16/13 5:39:21 PM IST: Starting install Install Phase 2 of component SQL*Plus Required Support Files
INFO: Setting up 'XDK Required Support Files 11.2.0.3.0 '
INFO: Setting up 'XDK Required Support Files 11.2.0.3.0 '
INFO: 7/16/13 5:39:21 PM IST: Starting install Install Phase 2 of component XDK Required Support Files
INFO: Setting up 'RDBMS Required Support Files Runtime 11.2.0.3.0 '
INFO: Setting up 'RDBMS Required Support Files Runtime 11.2.0.3.0 '
INFO: 7/16/13 5:39:21 PM IST: Starting install Install Phase 2 of component RDBMS Required Support Files Runtime
INFO: Setting up 'RDBMS Required Support Files 11.2.0.3.0 '
INFO: Setting up 'RDBMS Required Support Files 11.2.0.3.0 '
INFO: 7/16/13 5:39:21 PM IST: Starting install Install Phase 2 of component RDBMS Required Support Files
INFO: Calling Action unixActions10.2.0.3.0 createLink
        source = /u01/oracle/oraapp/lib/libclntsh.so.11.1
        destination = /u01/oracle/oraapp/lib/libclntsh.so
        overwriteExistingLink = true
        overwriteExistingDir = null
INFO: creating link '/u01/oracle/oraapp/lib/libclntsh.so.11.1' for '/u01/oracle/oraapp/lib/libclntsh.so'
INFO: creating link '/u01/oracle/oraapp/lib/libclntsh.so.11.1' for '/u01/oracle/oraapp/lib/libclntsh.so'
INFO: Exception thrown from action: createLink
Exception Name: FileNotFoundException
Exception String: File not found: %fileName%
Exception Severity: 2
INFO: Retry Handler not registered, using Super class functionality
File not found: %fileName%
INFO: Exception handling set to prompt user with options to Retry Ignore
User Choice: Ignore
INFO: Setting up 'Required Support Files 11.2.0.3.0 '
INFO: Setting up 'Required Support Files 11.2.0.3.0 '
INFO: 7/16/13 5:39:21 PM IST: Starting install Install Phase 2 of component Required Support Files
INFO: Setting up 'Installation Common Files 11.2.0.3.0 '
INFO: Setting up 'Installation Common Files 11.2.0.3.0 '
INFO: 7/16/13 5:39:21 PM IST: Starting install Install Phase 2 of component Installation Common Files
INFO: Calling Action generalActions10.2.0.9.0 setenv

Oracle Hyperion EPM 11.1.2 Installation on Linux Server Issue

Hi All,
We were downloaded and extracted all zip files (placed in opt/hyperion) from edelivery.oracle.com on LINUX 64 - Server.Before start the installation created new user and assigned to particular group.We are unable to point out the new location for installation, and tried in both GUI and silent installation. In GUI mode the "Browse" option is not highlighted for selecting a new location. It is giving default location eg: some other directory opt/epm.
After finally we found some one already installed EPM 11.1.2 partially in some other directory. But Users are different and Groups (the both users) are same for this installation.
The following error occurred "An existing Middle ware location has been detected .The default location is /opt/epm ".Even we are not able to change the location.
My issue is why it is pointing to older location after deleting all related hyperion folders in /opt/epm.But Seems OraInventory folder files and some files pointing to older location.(We haven't clean that folders).Can i delete those folders as well?
Any inputs would be really appreciated.
Thanks in advance

RahulS wrote:
hi...
Browse button was nt higihlighted coz EPM installer must hv found something frm previous installation.
Now jst delete Oracle folder where u hv installed EPM 11.1.2, delete EPM related things from env nd user profile, nd re start installing.
Cheers...!!!Is your keyboard broke?
Cheers
John
http://john-goodwin.blogspot.com/

Oracle EPM 11.1.2.2 installer bug

Hello,
Anyone found a problem with the installer for EPM 11.1.2.2 where if you go back into installtool.cmd after an install and try to add another product. The new product gets installed but the inventory and Comps.xml files get corrupted and some already installed products seem to be removed.
We have hit this several times and are wondering if there is a patch.
Thanks.

If you can reproduce it then it is probably worth raising with Oracle, I have not seen any patches related to it.
Cheers
John
http://john-goodwin.blogspot.com/

Oracle Application Server 10g R2 32bit installation on RHEL 5.4 64 bit

Hi !
Is it possible to install 32 bit Oracle Application Server 10g R2 on 64 bit RHEL 5.4?
Is there some spacial care I need to take to do this?
Regards,
GC

May be possible but it is probably not tested by Oracle nor is it supported as error correction support for OAS 10g has finished more than a year ago.
A good starting point is My Oracle Support Note [url https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=564174.1]564174.1, "Oracle Application Server 10g (10.1.2) Installation Requirements for Linux OEL 5 and RHEL 5". Make sure that you always use a 32-bit emulated shell (linux32 bash).
Thanks,
EJ

Oracle EBS 11.5.10.2 Installation Steps

Although this is by no means exhaustive or the most accurate, all contributions and/or corrections are welcome
As I attempt to reply the numerous calls and emails I have been getting, firstly sorry guys, I have been settling down at a new job, and haven’t had time to locate my implementation notes, however find below the steps I followed with a successful result.
Installing Oracle E-Business (EBS) Release 11i (version 11.5.10.2)
Linux Installation – SLES 9 Rel 1
•     Please follow these instructions – I could not have written a better set of instructions :
http://www.novell.com/coolsolutions/feature/16009.html
NOTE: Although this is written for SLES 9.1, I believe this will work for any Linux variant.
Also, make sure you have installed openmotif 2.0 or higher to make sure the forms server starts and remains running
Windows 2003 Server SP 1
Environment:
Windows 2003 Server was installed as an environment on VMWare Server (The free one).
Hardware Spec:
P4 800 Mhz CPU
2GB (Physical RAM) and 1GB (Virtual RAM)
250 GB (Physical HDD), 120GB (Virtual HDD)
DVD RW
DECLARE
At this point I have to say a few things:
1.     I have not attempted installing on any other version of Windows, so if you try with another version, I may not be able to answer your questions, although I believe it should not be any different.
2.     I would believe you can or have access to the internet and can download or find most of the resources needed.
3.     I would assume you have installed the Windows 2003 Server with SP 1, Internet Explorer and Outlook. Also, have included an IP address, a server name with its domain extensions in the host file.
4.     I would assume that you have created one group – dba , two users applmgr and oracle and included them in the dba and administrator groups
5.     I would assume that you are at least familiar with the terms and usage of abbreviations in this sort of environments.
6.     I would also assume you have reviewed and have made allowance to meet the required specification in terms of hardware (I did not attempt an installation on the USB HDD, so may not be able to help, if this applies to your situation)
BEGIN
     Prepare Environment
Download and have read the following software:
1.     Java Development Kit 1.3 (or higher version)
http://java.sun.com/downloads/index.html
2.     Active Perl – This is needed for the staging script adautostg.pl http://www.activestate.com/store/productdetail.aspx?prdGuid=81fbce82-6bd5-49bc-a915-08d58c2648ca
3.      Visual C++ - This is needed for many of the real-time code compilation
http://msdn.microsoft.com/vstudio/express/visualc/download/
4.      CYGWIN
http://www.cywin.com/setup.exe     (Free open source, never expires!)
OR
MKS Toolkit (Evaluation copy, 30 Trial or get a licence for about $500)
http://www.mkssoftware.com/eval/
This is necessary for certain unix-only available utilities required to implement/compile Oracle E-business Suite, such as which, make, cc, etc.
5.     The DVDs or downloaded zipped copy of the entire Oracle E-Business Suite software for Windows 32-Bit ( I did not attempt on a 64-Bit processor, though I believe it should not be different, but see the necessary documentation if that is your situation)
http://edelivery.oracle.com
6.     Jinitiator – This is required to run the forms on your system (Although a first attempt to view any of the form interfaces downloads and requests this be installed first) http://www.oracle.com/technology/software/htdocs/devlic.html?url=http://otn.oracle.com/software/products/developer/htdocs/jinit.htm
NOTE:
•     DO NOT Install into the default directories and do not allow spaces in file directories/path when installing the software, somehow experience has shown that the Oracle EBS does not handle spaces in file directories well, and results in untold hardship if ignored. E.g Default installation folder for an software installation may suggest C:\Program Files\ JDK 1.5, MAKE SURE you alter this to something like C:\JDK15. DO THIS FOR ALL SOFTWARE INSTALLED
•     After each software installation, please reboot the system before installing the next piece.
•     Make sure that all the paths to the bin folders for all software installed is included in the environment variables, and verify by typing path in the command prompt to display all paths listed
•     If using CYGWIN (like I did, as I could not afford a software expiring on me nor could afford $500 for a test). You may choose all the modules available, but you do not need all (it will be an overkill to have the entire unix utilities and libraries on your windows box, unless you plan on learning unix commands or into heavy development requiring a unix environment, without wanting a unix machine) MAKE SURE you choose all the library options, all the development options and that should be OK. Then confirm after the installation by typing which, cc (or gcc), make(gnumake), ls, gawk(awk), grep (egrep) (IMPORTANT:Where one of the other in brackets exists, copy and rename the copy as the alternative). As a double sure – copy all of these into C:\Bin directory.
•     If the Oracle EBS is downloaded, unzip all the files into the folder and ignore any suggestions that it will over-write other files such as the component.label files
Installation Proper
•     Run adautostg.pl – which you will find in the StartCD i.e the first file downloaded and unzipped. This will attempt to rearrange the installation files in the order in which the installation wizard – rapidwiz prefers and identifies the folders. (Saves you hand-holding the wizard by having to interact during the installation, pointing it to the relevant folders/files if not run) to create the staging area.
•     Run Rapidwiz – either by double clicking the rapidwiz.cmd in the startcd folder (this would be the one in the staging area) or from the command prompt
•     As required, point rapidwiz, to the bin folder of cygwin e.g C:\cygwin\bin (if this is as installed) in the place where it requires the MKS Toolkit
•     Pre-installation Checks – rapidwiz intelligently tests all the necessary software and requirements before installation starts. A corresponding message to each parameter suggests the opinion of the rapidwiz whilst a green tick indicates the parameter is sufficient, other indicators may need reviewing. Please make sure you resolve each issue before progressing with the installation. This may lead to a waste of time if not resolved.
•     Choose a single-node installation
(if just testing or practicing, you may also choose a multi-node if this is what you want.)
•     If all the modules are not needed (I installed all), you may have to choose which modules you require, and state where you want the modules installed.
•     Assuming all parameters are passed and installation begins, the different stages of the installation steps can be followed by the on-screen messages or log file reviews (each logfile directory will be displayed on the screen during the installation of each context).
•     Post Installation Checks – Rapidwiz does some checks after an installation, whether successful or not, and provides a report. When an installation is successful. It confirms and provides the url to login. The default username and password for the system administrator is usually sysadmin / sysadmin. You are encouraged to create another user immediately.
For all who asked, depending on how far up your hardware scales in terms of specifications, the installation may take about 3 hours (at least mine did) or more.
Login on to Oracle EBS !
The URL required for logging on to the OAM (Oracle Application Management - For the Apps DBAs) and OEBS (Oracle E-Business Suite - essentially for the Functional Implemeters/Consultants ) - The entire gamut (They are shown as hyperlinks), should be as follows;
http://hostname(servername.domainname.com):8000/
where hostname is the same as specified in your host file e.g servername.domainname.com or .whatever-u-like
and
8000 - is the default port, but you may have chosen your own port and that should be used in such a case.
N.B - The Forms server is often started when an attempt is made to access such an interface after login in to the OEBS. However, in my own case, it did not until I made sure openmotif 2.1 was installed on my SuSE Linux Enterprise Server 9.1. The windows installation started without any issues.
If all attempts fails….
You may have to try and try again by deleting all installation files and starting all the installation steps again. It will help if you know how to edit your registry settings to delete all reference to oracle e-business (not all reference to oracle though, as some odbc-related entries have been installed by Microsoft and require your registry settings to function)
Alternatively, send me your box, your mailing address and a token (money of course, and I may be able to set it all up for you) – JOKING!
CAVEAT: I will not be held responsible if anything unsavoury happens to your system in the course of you following the steps I have highlighted above either correctly or incorrectly. However, if you are successful, please sing my praises all over the forum and ask that I be rewarded by Oracle!
Olu

Hi
If anyone need the document to "How to install Oracle Applications 11i on Windows 2003" i can forward the document with screen shots with detailed steps.
Reg
Dwaraka

Oracle 10.2.0.1.0 installation fails

Hello,
I have a problem installing Oracle 10g (10.2.0.1.0) in a new home, while on the same machine is installed oracle 9i base. The installation starts, I select Enterprise suite, and a new home, the setup passes trough some checks and unexpectedly quits without any error.
The installation log ends like this:
*** Language Selection Page***
INFO: Setting the 'SelectedLanguages ( SELECTED_LANGUAGES )' property to 'en'. Received the value from the default settings.
INFO:
*** Specify Local Host Name Page***
INFO: Setting the 'HostName ( ORACLE_HOSTNAME )' property to 'testneodoc'. Received the value from the default settings.
INFO: Defaulting prerequisite location to 'C:\oracledb\database\stage/prereq'.
INFO:
*** Product-Specific Prerequisite Checks Page***
INFO: Entry point:oracle.server_EE
INFO: Starting Prerequisite checks : Tue Oct 07 12:45:36 CEST 2008
INFO: Checking CertifiedVersions
     This is a prerequisite condition to test whether the Oracle software is certified on the current O/S.
INFO: Expected result: One of 4.0,4.1,5.0,5.1,5.2
Actual Result: 5.2
Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking ServicePackChecks
     This is a prerequisite condition to test whether the Service Pack level recommended for installing the product is available on the system.
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking TotalMemory
     This is a prerequisite condition to test whether the system has sufficient physical memory.
INFO: Expected result: 256MB
Actual Result: 1015MB
Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking DetectIfDHCPAssignedIP
     This is a prerequisite condition to test whether the primary IP address of the system is DHCP-assiged or static.
INFO: Detecting the IP.....:192.168.10.106
INFO: Checking the network interface display name.... :Realtek RTL8139/810x Family Fast Ethernet NIC
INFO: Checking the network reference name..... :eth0
INFO: Checking the platform .......912
INFO: Check complete. The overall result of this check is: Failed <<<<
INFO: --------------------------------------------------------------------------------
INFO: Checking OracleBase
     This is a prerequisite condition to test whether the environment variable 'ORACLE_BASE' is set as a subdirectory of the Oracle home
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking OracleHomeSpace
     This is a prerequisite condition to check whether the specified Oracle Home contains any spaces in the path.
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking InstallOnRoot
     This is a prerequisite condition to test whether installation is done at the root of a drive.
INFO: Checking the ORACLE HOME.... :C:\oracle10g\products
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking DetectAnyInvalidASMHome
     This is a prerequisite condition to test whether the system has been cleaned properly.
INFO: Checking the platform .......912
here is a link to the whole log file [http://rapidshare.com/files/151696633/installActions2008-10-07_12-44-59PM.log.html]
Thanks in advance
Best regards,
Igor

newest update, i started oracle universal installer with the debug option and found a new log:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x46E1560
Function=Java_oracle_install_prereqs_util_W32LocateSidNative_w32LocateSidHome+0x210
Library=C:\Documents and Settings\Administrator\Local Settings\Temp\OraInstall2008-10-08_11-19-17AM\bin\win32\sidqueries.dll
Current Java thread:
     at oracle.install.prereqs.util.W32LocateSidNative.w32LocateSidHome(Native Method)
     at oracle.install.prereqs.core.ASMChecks.checkIfValidASMHome(ASMChecks.java:101)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at oracle.sysman.oip.oipc.oipcr.OipcrRulesEngine.executeRule(OipcrRulesEngine.java:325)
     at oracle.sysman.oip.oipc.oipcp.OipcpPrereqChecker.executeCheck(OipcpPrereqChecker.java:495)
     at oracle.sysman.oip.oipc.oipcp.OipcpPrereqChecker.runChecks(OipcpPrereqChecker.java:450)
     at oracle.sysman.oip.oipc.oipcp.OipcpPrereqChecker.executePrereqs(OipcpPrereqChecker.java:351)
     at oracle.sysman.oii.oiif.oiifw.OiifwPrereqWCDE$1.run(OiifwPrereqWCDE.java:650)
     at java.lang.Thread.run(Unknown Source)
Dynamic libraries:
0x00400000 - 0x0040B000      C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2008-10-08_11-19-17AM\jre\1.4.2\bin\java.exe
0x7C800000 - 0x7C8C0000      C:\WINDOWS\system32\ntdll.dll
0x77E40000 - 0x77F42000      C:\WINDOWS\system32\kernel32.dll
0x77F50000 - 0x77FEB000      C:\WINDOWS\system32\ADVAPI32.dll
0x77C50000 - 0x77CEF000      C:\WINDOWS\system32\RPCRT4.dll
0x76F50000 - 0x76F63000      C:\WINDOWS\system32\Secur32.dll
0x77BA0000 - 0x77BFA000      C:\WINDOWS\system32\MSVCRT.dll
0x08000000 - 0x08138000      C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2008-10-08_11-19-17AM\jre\1.4.2\bin\client\jvm.dll
0x77380000 - 0x77411000      C:\WINDOWS\system32\USER32.dll
0x77C00000 - 0x77C48000      C:\WINDOWS\system32\GDI32.dll
0x76AA0000 - 0x76ACD000      C:\WINDOWS\system32\WINMM.dll
0x10000000 - 0x10007000      C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2008-10-08_11-19-17AM\jre\1.4.2\bin\hpi.dll
0x003E0000 - 0x003EE000      C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2008-10-08_11-19-17AM\jre\1.4.2\bin\verify.dll
0x00820000 - 0x00839000      C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2008-10-08_11-19-17AM\jre\1.4.2\bin\java.dll
0x003F0000 - 0x003FE000      C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2008-10-08_11-19-17AM\jre\1.4.2\bin\zip.dll
0x03260000 - 0x03372000      C:\Documents and Settings\Administrator\Local Settings\Temp\OraInstall2008-10-08_11-19-17AM\jre\1.4.2\bin\awt.dll
0x73070000 - 0x73097000      C:\WINDOWS\system32\WINSPOOL.DRV
0x76290000 - 0x762AD000      C:\WINDOWS\system32\IMM32.dll
0x77670000 - 0x777A9000      C:\WINDOWS\system32\ole32.dll
0x035E0000 - 0x03631000      C:\Documents and Settings\Administrator\Local Settings\Temp\OraInstall2008-10-08_11-19-17AM\jre\1.4.2\bin\fontmanager.dll
0x73860000 - 0x738AB000      C:\WINDOWS\system32\ddraw.dll
0x73B30000 - 0x73B36000      C:\WINDOWS\system32\DCIMAN32.dll
0x738B0000 - 0x73980000      C:\WINDOWS\system32\D3DIM700.DLL
0x4B3C0000 - 0x4B410000      C:\WINDOWS\system32\MSCTF.dll
0x03700000 - 0x03723000      C:\Documents and Settings\Administrator\Local Settings\Temp\OraInstall2008-10-08_11-19-17AM\jre\1.4.2\bin\JavaAccessBridge.dll
0x03840000 - 0x03845000      C:\Documents and Settings\Administrator\Local Settings\Temp\OraInstall2008-10-08_11-19-17AM\jre\1.4.2\bin\jawt.dll
0x03850000 - 0x03857000      C:\Documents and Settings\Administrator\Local Settings\Temp\OraInstall2008-10-08_11-19-17AM\jre\1.4.2\bin\JAWTAccessBridge.dll
0x03AB0000 - 0x03ACE000      C:\Documents and Settings\Administrator\Local Settings\Temp\OraInstall2008-10-08_11-19-17AM\jre\1.4.2\bin\jpeg.dll
0x03B20000 - 0x03B39000      C:\Documents and Settings\Administrator\Local Settings\Temp\OraInstall2008-10-08_11-19-17AM\oui\lib\win32\oraInstaller.dll
0x77B90000 - 0x77B98000      C:\WINDOWS\system32\VERSION.dll
0x60EB0000 - 0x60EB7000      C:\Documents and Settings\Administrator\Local Settings\Temp\OraInstall2008-10-08_11-19-17AM\oui\lib\win32\orauts.dll
0x7C340000 - 0x7C396000      C:\Documents and Settings\Administrator\Local Settings\Temp\OraInstall2008-10-08_11-19-17AM\oui\lib\win32\msvcr71.dll
0x03CC0000 - 0x03CC8000      C:\Documents and Settings\Administrator\Local Settings\Temp\OraInstall2008-10-08_11-19-17AM\oui\lib\win32\orawsec10.dll
0x635D0000 - 0x635E9000      C:\Documents and Settings\Administrator\Local Settings\Temp\OraInstall2008-10-08_11-19-17AM\oui\lib\win32\orasrvm10.dll
0x71C40000 - 0x71C97000      C:\WINDOWS\system32\NETAPI32.dll
0x03C80000 - 0x03C8F000      C:\Documents and Settings\Administrator\Local Settings\Temp\OraInstall2008-10-08_11-19-17AM\jre\1.4.2\bin\net.dll
0x71C00000 - 0x71C17000      C:\WINDOWS\system32\WS2_32.dll
0x71BF0000 - 0x71BF8000      C:\WINDOWS\system32\WS2HELP.dll
0x71B20000 - 0x71B61000      C:\WINDOWS\System32\mswsock.dll
0x76ED0000 - 0x76EFA000      C:\WINDOWS\system32\DNSAPI.dll
0x76F70000 - 0x76F77000      C:\WINDOWS\System32\winrnr.dll
0x76F10000 - 0x76F3E000      C:\WINDOWS\system32\WLDAP32.dll
0x76F80000 - 0x76F85000      C:\WINDOWS\system32\rasadhlp.dll
0x76CF0000 - 0x76D0A000      C:\WINDOWS\system32\iphlpapi.dll
0x76B70000 - 0x76B7B000      C:\WINDOWS\system32\PSAPI.DLL
0x76CD0000 - 0x76CE9000      C:\WINDOWS\system32\MPRAPI.dll
0x76DF0000 - 0x76E24000      C:\WINDOWS\system32\ACTIVEDS.dll
0x76DC0000 - 0x76DE8000      C:\WINDOWS\system32\adsldpc.dll
0x76B80000 - 0x76BAE000      C:\WINDOWS\system32\credui.dll
0x7C8D0000 - 0x7D0CF000      C:\WINDOWS\system32\SHELL32.dll
0x77DA0000 - 0x77DF2000      C:\WINDOWS\system32\SHLWAPI.dll
0x76A80000 - 0x76A98000      C:\WINDOWS\system32\ATL.DLL
0x77D00000 - 0x77D8B000      C:\WINDOWS\system32\OLEAUT32.dll
0x76E30000 - 0x76E3C000      C:\WINDOWS\system32\rtutils.dll
0x7E020000 - 0x7E02F000      C:\WINDOWS\system32\SAMLIB.dll
0x770E0000 - 0x771E8000      C:\WINDOWS\system32\SETUPAPI.dll
0x77420000 - 0x77523000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.3790.3959_x-ww_D8713E55\comctl32.dll
0x03D60000 - 0x03D6E000      C:\Documents and Settings\Administrator\Local Settings\Temp\OraInstall2008-10-08_11-19-17AM\bin\win32\DHCPPrereq.dll
0x046E0000 - 0x046EC000      C:\Documents and Settings\Administrator\Local Settings\Temp\OraInstall2008-10-08_11-19-17AM\bin\win32\sidqueries.dll
0x76C10000 - 0x76C38000      C:\WINDOWS\system32\imagehlp.dll
0x6D580000 - 0x6D628000      C:\WINDOWS\system32\dbghelp.dll
Heap at VM Abort:
Heap
def new generation total 1408K, used 1108K [0x10010000, 0x10190000, 0x10770000)
eden space 1280K, 84% used [0x10010000, 0x1011d278, 0x10150000)
from space 128K, 24% used [0x10150000, 0x10157ef0, 0x10170000)
to space 128K, 0% used [0x10170000, 0x10170000, 0x10190000)
tenured generation total 17960K, used 12195K [0x10770000, 0x118fa000, 0x16010000)
the space 17960K, 67% used [0x10770000, 0x11358cc8, 0x11358e00, 0x118fa000)
compacting perm gen total 17152K, used 17037K [0x16010000, 0x170d0000, 0x1a010000)
the space 17152K, 99% used [0x16010000, 0x170b37b0, 0x170b3800, 0x170d0000)
Local Time = Wed Oct 08 11:19:47 2008
Elapsed Time = 23
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_08-b03 mixed mode)
#

Oracle 9.2.0.1.0 Installation

Similar Messages

Maybe you are looking for