Oracle 9.2.0.1.0 installed on XP

I am experiencing a LOT of difficulty with my Oracle clients installed on XP. Of course when I install Oracle on their machines, I'm logged on as administrator. When the user logs in and tries to use an access database connecting to Oracle via. ODBC they get a simple message
"Can't connect to Oracle"
When they try to go into the ODBC administration window in the control panel they can click on the driver, but they get a "System 5 error". This tells me there is a permission problem. Which makes this worse is some machines have multiple users using it throughout the day.
A little test revealed that if I made that user a local administrator to that machine, they can work just fine.
Unfortunately although this would be a simple solution in the real world, we all know it's just not a good idea to make every user that uses that machine a local admin.
I'm not having this problem on any pre XP machines.
HELP!!!!

hi penny,
this is the portal content management forum. for your database question please use the database forums:
http://forums.oracle.com/forums/index.jsp?cat=18
thanks,
christian

Similar Messages

Oracle 9I Database, and Mobile Server install history

Dear Oracle technical representative:
This TAR started out as a true request for help in solving installation problems with Oracle 9i Release 2 Enterprise Edition, and Oracle 9i Mobile Server Release 5.0.1, but it has turned into a history of frustration with out of date, laconic, and often incorrect, and misleading documentation. As a software developer, I understand that documentation is always out of date, at least mine is. Nonetheless, I must speak my mind while understanding, and sympathizing with your situation.
I struggled through the documentation, and managed to get everything working. While I was doing that, I wrote down the step by step procedure that I used to get Database, and Mobile Server running. By sharing this rough install history with you, it is my hope that it will help prevent others from experiencing the same difficulties that I have had. It has been my observation that when a user has problems installing a trial software package they give up quickly, and do not purchase a copy. It is thus extremely important that the installation instructions, and quick start guide be accurate, attentive to detail, and well written. The first impression is the one that counts.
The Oracle 9i Lite Installation, and Configuration Guide for Windows NT shipped with Oracle 9i Lite Release 5.0.1 definitely requires, and emergency rewrite. It is terribly out of date, inaccurate, and laconic. My guess is that it is a very sloppy rewrite of poorly written 8i documentation. The Oracle 9i Database Installation Guide for Windows is somewhat better. It however should do a better job informing you that before installing onto a old server the Microsoft Foundation Class (MFC), and VC runtime libraries must be up to date. The history describes the trouble with not having the MFC42.dll at version 6. Another corker is that the default port the installer presents is 2030, and not 1521, and that leads to major confusion in the both the Database, and Mobile Server installs.
Thank you for looking at the history. I hope that it will be of use to you when you update your documentation.
Thomas G. Matney
Mississippi State University
[email protected]
(662)325-2791
TAR for Oracle 9i Release 2 Database Enterprise Edition, and Oracle Lite Release 5.0.1 Mobile Server
Installation problems are highlighted in red.
Installation sequence/history:
     1. Installed Windows NT 4.0 Server SP1 on Dell Power Edge 4300 dual x86 server to wipe the slate clean.
     2. Setup TCP/IP, and IPX/SPX networks
          Computer name YGGDRASILL
          Host name = YGGDRASILL
          Domain = CFR.MSSTATE.EDU
          Internet name = YGGDRASILL.CFR.MSSATE.EDU = 130.18.130.225
     3. Installed NT SP3, and Internet Explorer 4.01 from the NT 40 Options Pack CD as the gateway to installing MTS 2.0, and IIS 4.0.
     4. Installed MTS 2.0, and IIS 4.0 from NT 4.0 Optins Pack CD.
     5. Applied NT 4.0 SP6.
     6. Installed Internet Explorer 5.5 as a prerequisite to installing MADAC 2.6.
     7. Installed MDAC 2.6
     8. Installed Paint Shop Pro 7 for capturing error screens.
     9. As previous install errors stated that the ordinal function xxxx could not be found in MFC42.dll, the latest version (6.0.8665.0) of the dll was installed, and registered from MS VC++ SP5. Also I upgraded MSVCIRT.dll, MSVCRT.dll, MSCRT40.dll, and added MSVC60.dll from SP5 to be on the safe side.
According to the installation documents all the prerequisites for installing Oracle 9i Release 2 Database Enterprise Edition are satisfied.
     10. Began install of Oracle Database Enterprise Edition with target parameters:
          Home directory = D:\Oracle\Ora92
          Database directory = D:\Oracle\oradata
          Global database name = FIA.YGGDRASILL.CFR.MSSTATE.EDU
          Port = 2030
          SID = FIA
          SYSTEM Password = phwphw
          SYS Password = phwphw
          SCOTT Password = phwphw
          DBSNMP Password = I left this one unassigned or empty.
          tnsnames.ora entry for remote TCP/IP connection
          a. CD 1 of 3 load
               1. Error writting to MFC42u.dll. Action ignore. A check indicated that MFC42u.dll version did not match the updated version of MFC42.dll. Plan is to update after install. Unicode version of MFC is probably not used by the installer.
          b. CD 1 completed with only one problem, and CD 2 load begins.
          c. CD 2 installed without incident., and CD 3 load begins, and completes without farther problems. The only issue to address at this time is to update the MFC42u.dll.
               HTTP Server URLs
                    http://7778
                    https://4443
     12. Evaluation of install success begins.
          a. Oracle HTTP Service will not start. It is of particular interest that on installs that I do not upgrade the MFC42.dll the Oracle HTTP Service will start correctly, but during the install I get the error message Ordinal nnnn not found in MFC42.dll, and the Oracle MTS Recovery Service crashes during the install. I am caught between a rock and hard spot on this one. See the Figure 1. At the end of this document. I do not need the HTTP Server at this time but I will need it later and this issue must be resolved. It appears that it hangs during startup. I am sorry but I lost the ordinal number nnnn.
          When I try to start the HTTP server from the Programs menu. It Hangs, and does not return an error message. See Figure 2, and the included Apache Setup.txt, the install log, and the HTTPd.conf . The conf, and setup files look OK to me. What is the problem?
          b. All other services start correctly.
          c. Logged into the database as SCOTT on the server with SQL Plus using the connection information:
               FIA.CFR.MSSTATE.EDU =
               (DESCRIPTION =
               (ADDRESS_LIST =
               (ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
               (CONNECT_DATA =
               (SERVER = DEDICATED)
               (SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
          I created some tables, inserted data, and queried for the data. Everthing seems to be working correctly.
          d. Logged in remotely from my AOL account on a dial-up line using Oracle 9i Release 2 Personal Edition installed on my ThinkPad. Every thing tested out as above. I used the connection information:
               FIA.CFR.MSSTATE.EDU =
               (DESCRIPTION =
               (ADDRESS_LIST =
               (ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill.cfr.msstate.edu)(PORT = 1521))
               (CONNECT_DATA =
               (SERVER = DEDICATED)
               (SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
     13. I concluded that except for the Oracle HTTP Server Service not starting correctly, and that after updating the MFC42u.dll to VC++ SP5 level the stage is set for installing Oracle 9i Mobile Server Release 5.0.1. I copied the MFC42u.dll to the server and registered it successfully.
     14. As Visual Studio 6.0 Professional updates all of the MFC stuff, I decides to install it at this juncture, and apply SP5.
     15. Installed JDK1.3.1 required for Oracle 9i Mobile Server Release 5.0.1
At this time the prerequisites for installing Oracle 9i Mobile Server Release 5.0.1 are satisfied, and MFC, and rt are at version 6.
It is important to note that after installing MS Visual Studio Professional 6.0 SP5, the HTTP server started working. It is clear that prior to installing Oracle Database it is essential that MFC, and possibly other components are upgraded before starting an installation of Oracle. This probably only applies to old NT servers, but it should be mentioned in the installation instructions.
     16. Attempt to install Oracle Mobile Server Release 5.0.1
          a. File locations Screen
               Name: = OraLite501
               Path: = D:\OraLite501
          b. Select Mobile Server at Installation Screen
          c. Mobile Server Repository Database Information Screen
               Hostname = YGGDRASILL = hostname from tnsnames.ora
               Port = 2030 = same as Database port
                    It is troublesome that the port in tsnames.ora is 1521, and not 2030 as was specified in the database install. I will try this port on the reinstall. On the retry, it worked. The problem was that I was mislead by the default port of 2030 at the database install. The database was actually installed on port 1521, and I was not given an error message, or warning. As I am a first time installer of Oracle products this threw me for a loop. The default port for the database needs to be 1521, if regardless of what the user specifies for a port you are going to install on port 1521.
               Net Service Name = FIA.YGGDRASILL.CFR.MSSTATE.EDU = Global database name as required by installation instructions.
          d. Yes. At Do you want to install the Mobile Server Repository question.
          e. At Oracle Protocol Support, I checked the SPX box.
          f. Summary, and Install screens function to specifications.
          g. Mobile Server Repository Wizard
               Database System password:
                    Password = phwphw
          h. Mobile Server Repository Wizard
               Schema Name: fiafield
               Password : fiafield
          i. Success at last with the install part. The problem was the wrong port number. See my above comments on this problem, and how Oracle could grease the skids for the next first time installer.
     j. I could not find the httpd.conf file in the place the install instructions said it should be for running the Mobile Server in Oracle HTTP Server. Since only one copy of httpd.conf existed, I added the include D:\OraLite501\mobile\server\bin\wtgias.conf to the bottom of the file assuming that it is the correct one. I the re-booted instead of using apache -k restart. The Oracle HTTP Server started, so there is hope. The install instructions state that the httpd.conf file would most likely be in the program files directory, when they are really installed in the Oracle Lite home directory.
     k. According to the documentation the Mobile Server should start when the Oracle HTTP Server starts with the wtgias.conf file added to the httpd.conf file. It does not. If I use Process Explorer, I know that Apache loaded the wtgias.conf, because both Apache.exe processes that are running have the wtgias.dll loaded. The facts are at this stage of the game are
          1. OraMTSRecoveryService is started
          2. OracleOraHome92HTTPService is started
          3. OracleOraHome92Listener is started on port
          4. OracleServiceFIA is started
          5. Apache.exe has the wtgias.dll loaded
          6. The Moble Server is not running and it should be if the documentation is correct.
          7. If I start the Mobile Server either as a service using wtgsvc -i or with the webtogo command from the DOS prompt, the Mobile Server starts, but when I attempt to log in with the URL http://Yggdrasill:7778/webtogo/startup it inform me the Mobile Server is not started and it is. Figure 3 shows the response I receive from the login attempt.
     l. I finally ran the Mobile Server in total debug mode using the command webtogo -d0", and it gave me the subtle hint that the correct URL is
          http://Yggdrasill.cfr.msstate.edu/webtogo/startup.
     When I use the above URL and I can login to the Mobile Server with UN = fiafield, and PW = fiafield. I was confused by the documentation. I was under the assumption that the host address would be either http://Yggdrasill:7778, or http://Yggdrasill:4443. After all when I, installed Oracle Database these URLs were listed. It needs to be made clear in the installation guide for the mobile server that the Mobile Server address is http://Your servers WWW address/webtogo/startup, and the statements about the Mobile Server will start when the Oracle HTTP Server is started needs to be removed since they are incorrect. Also, the documentation should clearly state that the Schema Name, and Password given in the Repository Wizard Screen are synonymous with the username, and password for the Mobile Server login.
     m. After determning the hard way that the Mobile Server does not start when the the Oracle HTTP Server starts, and that the correct URL is http://Internet address/webtogo/startup = http://Yggdrasill.cfr.msstate.edu/webtogo/startup, I decide to start the Mobile Server as a service with the command wtgsvc -i. After I re-booted, to my surprise, I could not login to the Mobile Server. When I checked the system services, the webtogo service was running. So to give the start as a service thing a fair chance I re-booted again, but obtained the same results. I thus concluded that the Mobile Server will not run correctly as a service. As it turns out my conclusion was wrong. After waiting a few minutes, my login try was successful. The documentation should indicate that after booting it may be a minute or two before the Mobile Server service become available.
     n. After some serious problems with the installer, and the documentation everything is working. I have a green light to go on to the next stage, which is program the handheld to take advantage of the Mobile Server. I will be glad to get back to programming, and am so thankful that I am not a network administrator.
     Appendix
HTTPd.Conf (Abstract only), Apache Setup.txt,
tsnames.ora, and listener.ora.
HTTPd.conf (Abstract only)
# Based upon the NCSA server configuration files originally by Rob McCool.
# Include the Oracle configuration file for custom settings
include "D:\oracle\ora92\Apache\Apache\conf\oracle_apache.conf"
include "D:\OraLite501\mobile\server\bin\wtgias.conf "
     tsnames.ora
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora92\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
INST1_HTTP.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
EXTPROC_CONNECTION_DATA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
          listener.ora
# LISTENER.ORA Network Configuration File: D:\oracle\ora92\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\ora92)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
(ORACLE_HOME = D:\oracle\ora92)
(SID_NAME = FIA)
          Apache SetupInfo.txt
The following information is available in:
D:\oracle\ora92\Apache\Apache\setupinfo.txt
The HTTP Server can be accessed using the following URLs:
http://yggdrasill:7778
https://yggdrasill:4443

You can find information regarding enabling the iSQLPLUS in the following Oracle manual.
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14357/ch2.htm

Oracle XE service does not get installed

Hi,
2 days ago downloaded Oracle 10 g Express Edition and installed on my computer. It installed succesfully and gave no erros. But when I tried to go to the homepage it failed to open. Then I check the services.msc and found that OracleXEService was not there. Then I uninstalled it and installed 11g XE Release2. But again the same problem. What's wrong with this? Does the OracleXE setup install both client and server side?

Well, there must be something going wrong on your system, and there should be some clue either in the installation process itself, or in the log files.
On my system, there are five logs in the directory named above:
cloneDBCreation.log
CloneRmanRestore.log
postDBCreation.log
postScripts.log
XE.bat.log
Do you have any of these? If not, you could try a silent installation as documented in the [url http://download.oracle.com/docs/cd/E17781_01/install.112/e18803/toc.htm#BABBCGHA]Installation Guide. That way you'll definetly get a log file for the installation. There is also a silent mode for a repair installation. Perhaps you could try that as well.
-Udo

Cant not run root.sh u01/app/oracle/product/10.2.0/crs/install/rootinstall:

Hello,
Production machine hardware was failed which caused to reinstall the clusterware after following deinstall steps of metalink doc., but facing problems like "error invoking ntcontab.o" and error in invoking target nnfgt.o and error in invoking target client_sharedlib"
these errors are raising at reinstall time of clusterware, if I am ignoring installation is going on but finally its showing only root.sh and not not showing the message to execute root102.sh, and even if I am trying to execute root.sh then below is the permission error
/u01/app/oracle/product/10.2.0/crs/root.sh: line 2: /u01/app/oracle/product/10.2.0/crs/install/rootinstall: Permission denied
even after that I changed the file permission its further stuck at error can not open libcltsh.so.10.1 file size is too short.
Does any one have any ides about it, I have raised SR at severity 1 as it is production server but no Reply yet.
Regards,
Farrukh Salman,

Hello,
Thanks to reply, I have installed RAC 10g R2last month have to redo it coz of SAN connectivity driver failure and cross checked all the required RPMs again its all ok mean time I got a reply by metalink support as under
As per bug
Bug 4113186
Looking at script /oracle/CRSHome/bin/ocrconfig, looks the installer didn't
create the script properly as ORA_CRS_HOME is left null as below:
ORA_CRS_HOME=
ORACLE_HOME=/oracle/CRSHome
Hence changing ORA_CRS_HOME to point to /oracle/CRSHome resolves this.
Can you please help me out to understand these lines.
Regards,

Oracle on windows cluster, with failsafe installed. Can it be switched live

Hi all
We have a oracle database, 10.2.0.4, installed on a 2 node Windows cluster (2003 R2 64 bit). Only one node is the active node. On top of this Failsafe is installed.
Oracle is used for SAP.
Normally when I need to switch the Oracle database from node1 to node2 I follow this procedure:
1 bring down SAP
2 set the database offline
3 switch the Oracle database using failsafe
4 set the database online
5 start sap
Being a hospital we just want to have SAP up all the time, this procedure only takes 20 min but I wondered if the switch could be done live
So just go into the failsafe manager and switch, (won't do it in prime time of course)
Can this live switch result in a corrupt database?
Thanks for replying

Hi,
to do it really life you need another technology than a "failover cluster". You can use RAC for this.
A failover cluster itself needs to be sure that the stack is down, before bringing it up on the other side. If not this can leed to corruptions... (though Oracle will try to prevent them in most cases)...
Regards
Sebastian

Oracle Shadow Copy Service is not installed

Hi all,
 
I have read on a book that when you install Oracle 11g on Windows-based servers, a service named as Oracle Shadow Copy Service is automatically installed.
 
I installed Oracle 11g on a Windows XP SP2 machine with 1 GB RAM and did not find that service there. Does it require Windows server OS to be able to install it? or did I miss something?
 

Hi there,
I geuss this service is installed when you have 2003 server installed. I wont come with the Win Xp Prof.With 11g,RMAn is able to use it.
http://www.oracle.com/technology/deploy/availability/htdocs/rman_overview.htm
Aman....

Oracle 8.1.7 does not install in pentium4 machine

oracle 8.1.7 does not install in pentium4 machine. When I insert the disk, it fails to start. If I click setup.exe, it again fails to start installer. The problem is due to Pentium4. Any help? or any link/lead on this issue?
Thanks.
Jay

There are some known bugs with Pentium 4 and Oracle 8i. Here is a copy of the posted solution:
Re: [cornball] Oracle 8i installation on a Pentium 4 machine [In reply to] Can't Post
I had the same problem on Pentium 4 machine. I found the following solution and also posted it on www.orafaq.net.
The Oracle installation is now Java based. Oracle 8.1.7 comes with JRE 1.1.7 which is not supported on Intel P4. There is a new version of JRE 1.1.8 available from SUN. Which can be downloaded fron java.sun.com.
http://java.sun.com/products/archive/jdk/1.1.8_007/jre/index.html
Now follow these steps:
1. Install JRE 118 (consider installation folder as C:\Program Files\JRE118)
2. Copy Oracle installation to some folder e.g. C:\OraInst
3. Copy "bin" and "lib" folders from
"C:\Program Files\JRE118" to
"C:\OraInst\stage\Components\oracle.swd.jre\1.1.7.30\1\DataFiles\Expanded\jre\win32"
4. Now run the setup.
It will run perfectly.
HTH,
Willis

Do I have to make Oracle XE listener working before I install Oracle APEX?

Hi, guys:
I have a question: Do I have to make Oracle XE listener working before I install Oracle APEX 4.2? I have installed Oracle XE 11g on windows 7, however, I got problem to run Oracle XE listener, though Oracle XE itself is running. Since my purpose is to run Oracle APEX I was wondering if I have to make Oracle XE listener working at first.
Thanks for your comments!
Sam

Hi, Jarola:
Thanks for your help! My supervisor asked us to install Oracle XE, OC4J, and APEX listener in our local PC (windows 7 64 bits). I guess his purpose is to train us to install APEX 4.2 eventually. I installed OC4J and APEX listener before without much problem; but I have difficulty to install Oracle XE on windows 7 64 bits version as so far Oracle XE only supports 32 bits windows. after I installed Oracle XE, I got these problems:
#1 the Oracle XE itself is running, but XE listener cannot work, it always reports "the Oracle OracleXETNSListener service started and then stopped, some service stop automatically if they are not in use by other services or programs.",
#2 It looks Oracle_home of XE conflicts with that of OC4J. I tried to set ORACLE_HOME as "C:\OC4J\oc4j_extended_101350;C:\oraclexe\app\oracle\product\11.2.0\server", but OC4J cannot find config file so I cannot start OC4J. it is messed up.
#3 most of all, I was wondering if you could tell me the relationship among Oracle XE, OC4J, and APEX listener regarding installing APEX 4.2, are they all necessary to install APEX 4.2? if so, could you guide me to install these things with proper steps (say, which one should be installed first?)? any of your suggestion would be very appreciated! (I have tried two weeks without progress...)
Sam
Edited by: lxiscas on Nov 28, 2012 8:00 AM

Oracle 8.1.5 for linux, install help.

Does anyone have a successful installation of Oracle 8.1.5
running on Red Hat 6.0? I have tried to install it but, I can't
get the installer to run. I get java errors when I run,
runInstaller. I have installed jre1.1.6. Any help would be
appreciated.
null

David Tamburin (guest) wrote:
: Does anyone have a successful installation of Oracle 8.1.5
: running on Red Hat 6.0? I have tried to install it but, I
can't
: get the installer to run. I get java errors when I run,
: runInstaller. I have installed jre1.1.6. Any help would be
: appreciated.
We have gotten it running on two RH6 machines. Took a little
extra work.
Briefly...
* Make sure you use the latest JRE, and try using the one
with native threads (if not you will have to hand edit the
netasst script and remove the -native flag)
* For some reason some of the libs that get installed are
zero length. Find the thread on this forum where someone posted
some sample code to recreate these. If I remember right its the
libjni library. It is a very short easy compile.
* Make sure you got lots of RAM (128 min) and double that in
swap
* Watch for binaries that get installed without the execute
bit set. For instance I think tnslsnr is one of them, as well as
SQLPlus. I can't remember exactly, but that's one other problem
to watch out for.
So far things here are working. I even tried a little java in a
stored procedure. My latest issue is trying to get the PROC
samples to compile.
-Scott
null

Can't install Oracle XE on Windows 7 : the install ends fine but no database created and error in log file

When i try to install Oracle XE 64bit 11g on a windows 7, the installation ends correctly, but no database is created (no datafiles) and in the log file I find :
Oracle Database 11g Clusterware Release 11.2.0.2.0 - Production Copyright 1996, 2010 Oracle. All rights reserved.
2015-03-24 15:24:14.733: [ default][3316]ut_read_reg:2:ocr registry key SOFTWARE\Oracle\olr cannot be opened. error 2
[ CLSE][3316]clse_get_crs_home: Error retrieving OLR configuration [0] [Error opening olr registry key. Le fichier spécifié est introuvable.
What's the problem?

Oracle XE 64bit 11g on a windows 7
Which edition ?

Oracle 8.1.6(bundled CD) install problem (ld failed)

Hello...
I tried to install oracle 8.1.6 into server. But I failed 3 more times.
I don't know why. Please help me...
According to the Oracle's install guide, I
1) Added semaphore and shared memory info. to /etc/system
and
2) Install Intel Solaris 8 recommended patches.
3) Install Forte C/C++ compiler. ( I used gcc for install. After failure,
I cahanged compiler from gcc to Forete).
I have no problem for mounting CD-ROM. But
while copying and linking Oracle files, OUI gave me error messages such as " ld failed ..." .
So I tried do manually such like this, "# make -f ins_plsq.mk install" . But the result was the same.
Do you have any idea for this error?
Thsnks.

Please see error messages...
chmod 755 /u01/app/oracle/product/8.1.6/bin
rm -f wrap
Linking wrap
LD_RUN_PATH=/u01/app/oracle/product/8.1.6/lib:/u01/app/oracle/product/8.1.6/rdbms/lib:/u01/app/oracle/product/8.1.6/JRE/lib/i386/native_threads;export LD_RUN_PATH; ld -o wrap -L/u01/app/oracle/product/8.1.6/plsql/lib/ -L/u01/app/oracle/product/8.1.6/lib/ -dy /u01/app/oracle/product/8.1.6/lib/SC5.0/crti.o /u01/app/oracle/product/8.1.6/lib/SC5.0/crt1.o /u01/app/oracle/product/8.1.6/lib/SC5.0/crtn.o /u01/app/oracle/product/8.1.6/plsql/lib/s0plsw.o -lpsa8 -lpls8 -lplp8 -lclntsh `cat /u01/app/oracle/product/8.1.6/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /u01/app/oracle/product/8.1.6/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /u01/app/oracle/product/8.1.6/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /u01/app/oracle/product/8.1.6/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /u01/app/oracle/product/8.1.6/lib/sysliblist` -lm /u01/app/oracle/product/8.1.6/lib/libplc8.a -lpls8 -lclient8 -lnl8 -lnro8 -ln8 /u01/app/oracle/product/8.1.6/rdbms/lib/kpudfo.o -lmm -ltrace8 -lgeneric8 -lcommon8 -lslax8 -lcore8 -lnls8 -ldbicx8 -lcore8 -lsql8 `cat /u01/app/oracle/product/8.1.6/lib/sysliblist` -Y P,/opt/SUNWspro/lib:/opt/SUNWspro/WS6U2/lib:/u01/app/oracle/product/8.1.6/lib:/usr/openwin/lib:/usr/bin:/usr/lib:/usr/ucb/lib:/usr/java/lib:/usr/ccs/lib:/usr/lib -lc -laio -lm
Undefined first referenced
symbol in file
skgmaddress /u01/app/oracle/product/8.1.6/lib//libclntsh.so
skgupvectorpost /u01/app/oracle/product/8.1.6/lib//libclntsh.so
kpummini /u01/app/oracle/product/8.1.6/lib//libclntsh.so
slfisk /u01/app/oracle/product/8.1.6/lib//libclntsh.so
sslssunreghdlr /u01/app/oracle/product/8.1.6/lib//libclntsh.so
sgslun0ReadEnabled /u01/app/oracle/product/8.1.6/lib//libclntsh.so
osnpor /u01/app/oracle/product/8.1.6/lib//libclntsh.so
ld: fatal: Symbol referencing errors. No output written to wrap
*** Error code 1
make: Fatal error: Command failed for target `wrap'

Need help: Silent install of oracle 11g express edition does not install services. As a result, i'm unable to start\launch database

Installing using the GUI works fine. I'm using the following code to perform the silent installation of the oracle client: C:\temp_pyx\Oracle source\3-Oracle 11G Express\setup.exe /S /f1"C:\temp_pyx\Oracle source\3-Oracle 11G Express\response\OracleXe-install.iss" /f2 "c:\windows\logs\paychex\oracle11ginstall.log"
Result code in "oracle11gisntall.log" shows "result = 3"
response file is configured as follows:
** Response file to perform silent install of Oracle Database 11g Express Edition    **
** Values for the following variables are configurable:                              **
** szDir - Provide a valid path                                                      **
** TNSPort - Provide any valid available port number                                 **
** MTSPort - Provide any valid available port number                                 **
** HTTPPort - Provide any valid available port number                                **
** SYSPassword - Provide a valid password string                                     **
[{05A7B662-80A3-4EB9-AE1D-89A62449431C}-DlgOrder]
Dlg0={05A7B662-80A3-4EB9-AE1D-89A62449431C}-SdWelcome-0
Count=7
Dlg1={05A7B662-80A3-4EB9-AE1D-89A62449431C}-SdLicense2Rtf-0
Dlg2={05A7B662-80A3-4EB9-AE1D-89A62449431C}-SdComponentDialog-0
Dlg3={05A7B662-80A3-4EB9-AE1D-89A62449431C}-AskPort-13013
Dlg4={05A7B662-80A3-4EB9-AE1D-89A62449431C}-AskSYSPassword-13011
Dlg5={05A7B662-80A3-4EB9-AE1D-89A62449431C}-SdStartCopy-0
Dlg6={05A7B662-80A3-4EB9-AE1D-89A62449431C}-SdFinish-0
[{05A7B662-80A3-4EB9-AE1D-89A62449431C}-SdWelcome-0]
Result=1
[{05A7B662-80A3-4EB9-AE1D-89A62449431C}-SdLicense2Rtf-0]
Result=1
[{05A7B662-80A3-4EB9-AE1D-89A62449431C}-SdComponentDialog-0]
szDir=C:\programdata\oraclexe
Component-type=string
Component-count=1
Component-0=DefaultFeature
Result=1
[{05A7B662-80A3-4EB9-AE1D-89A62449431C}-AskPort-13013]
TNSPort=1521
MTSPort=2031
HTTPPort=8080
Result=1
[{05A7B662-80A3-4EB9-AE1D-89A62449431C}-AskSYSPassword-13011]
SYSPassword="Intentionally left blank"
Result=1
[{05A7B662-80A3-4EB9-AE1D-89A62449431C}-SdStartCopy-0]
Result=1
[{05A7B662-80A3-4EB9-AE1D-89A62449431C}-SdFinish-0]
Result=1
bOpt1=0
bOpt2=0

I only see the following folders after install, which tells me that although the program shows up in program and features, it is still not successfully installed?

Oracle 8.1.5 can't install on PC Server with 2GB RAM

The Oracle Database Configration Assistant can't create a database instance.
I have tried on several servers include DELL PE6400, HP Netserver LH3000 and so on.
all failed . But when i change the ram size to 1GB or less, the installation
will success.

David Tamburin (guest) wrote:
: Does anyone have a successful installation of Oracle 8.1.5
: running on Red Hat 6.0? I have tried to install it but, I
can't
: get the installer to run. I get java errors when I run,
: runInstaller. I have installed jre1.1.6. Any help would be
: appreciated.
We have gotten it running on two RH6 machines. Took a little
extra work.
Briefly...
* Make sure you use the latest JRE, and try using the one
with native threads (if not you will have to hand edit the
netasst script and remove the -native flag)
* For some reason some of the libs that get installed are
zero length. Find the thread on this forum where someone posted
some sample code to recreate these. If I remember right its the
libjni library. It is a very short easy compile.
* Make sure you got lots of RAM (128 min) and double that in
swap
* Watch for binaries that get installed without the execute
bit set. For instance I think tnslsnr is one of them, as well as
SQLPlus. I can't remember exactly, but that's one other problem
to watch out for.
So far things here are working. I even tried a little java in a
stored procedure. My latest issue is trying to get the PROC
samples to compile.
-Scott
null

Installation of oracle 8.1.5 on solaris8 install

I have 2.5 GB HardDisk, I installed Solaris8 on intel using autolayout & then I tried to install Oracle8.1.5 on solaris but installation process is hangingup at this
oracle.sysman.oii.oiic.oiicInstaller.run(oiicInstaller.Java:287)
oracle.sysman.oii.oiic.oiicInstaller.man(oiicInstaller.Java:439) stage. Pl' let me know what shall i do next to complete the installation process.

Sounds like u ran out of /opt space.
Redo do solaris with bigger space or get bigger drive.

Oracle 10g Express Edition Beta 3 Install Problems

I made three install attempts for this software, and I'll detail them below.
This was a fresh install on a computer that previously had no other version running
ATTEMPT 1
The installation procedure ran, but even though the OracleServiceXE service started, the server wouldn't work and I couldn't connect to it.
c:\oraclexe\app\oracle\product\10.2.0\server\config\log\postDBCreation.log contained the following...
SQL> connect "SYS"/"&&sysPassword" as SYSDBA
ERROR:
ORA-01017: invalid username/password; logon denied
SQL> set echo on
SQL> //create or replace directory DB_BACKUPS as 'D:\utils\oraclexe\app\oracle\flash_recovery_area';
SP2-0640: Not connected
SQL> begin
2 dbms_xdb.sethttpport('8080');
3 dbms_xdb.setftpport('0');
4 end;
5 /
SP2-0640: Not connected
SQL> create spfile='D:\utils\oraclexe\app\oracle\product\10.2.0\server\dbs/spfileXE.ora' FROM pfile='D:\utils\oraclexe\app\oracle\product\10.2.0\server\config\scripts\init.ora';
SP2-0640: Not connected
SQL> shutdown immediate;
ORA-01012: not logged on
SQL> connect "SYS"/"&&sysPassword" as SYSDBA
ERROR:
ORA-01017: invalid username/password; logon denied
I proceeded to uninstall and then reinstall in attempt 2.
ATTEMPT 2
This time, the installation procedure ran but didn't finish. It got up to the point where it said "Creating and starting services for Oracle Database 10g Express Edition..." and it sat there for a long time doing nothing, but there was a process "IDriver.exe" using a large percentage of the CPU all that while.
I ended up having to kill the installation process with the task manager to stop it, and then since the installation wasn't successful had to manually delete everything in c:\oraclexe
ATTEMPT 3
This time the installation went a lot better and after the install, everything in c:\oraclexe\app\oracle\product\10.2.0\server\config\log\postDBCreation.log looks normal.
I am able to connect to the database with sqlplus now, but the OracleXETNSListener process won't start.
When starting, it says this, but the OracleXETNSListener doesn't stay running:
C:\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleXETNSListener
The OracleXETNSListener service was started successfully.
C:\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleServiceXE
The OracleServiceXE service is starting.
The OracleServiceXE service was started successfully.
If I start the service in the windows services application it says "The OracleXETNSListener service on Local Computer started and then stopped..."
However, if I explicitly run c:\oraclexe\app\oracle\product\10.2.0\server\bin\tnslsnr.exe from the commandline, it works.
Why won't it start as a service?

Hello
I have the same problem.
My config :
- XP SP 2
Other installed products :
- last version Oracle JDevelopper
- Oracle Client 9.2.0 (the service does not run)
By the way,
JDev needs ORACLE_HOME set (c:\oracle for me).
Should Oracle XE be installed in %ORACLE_HOME% too or in an new empty folder (like c:\oraclexe) as it is recommended by the installer
I checked if I already use the port 1521 using netstat /ab but it seems this port is not used.
On a second PC, it works well.
How can I access the DB on my secondary PC from jdev on my priomary PC?
--> how can I only install OracleXE client on my primary PC?
Rgds
Guillaume

Oracle 9i, "Error in invoking target install of..."

Hi :),
When running the Ora9i Universal Installer, I got this pop-up window error:
" Error in invoking target install of makefile /opt/oracle/OraHome1/plsql/lib/ins_plsql.mk "
I tried to fix it as explained in http://www.puschitz.com/InstallingOracle9i.shtml#OracleInstallationErrors but after executing the genclntsh script I got this message:
collect2: ld terminated with signal 11 [Segmentation fault]
ar: creating /opt/oracle/OraHome1/lib/libclntst9.a
Created /opt/oracle/OraHome1/lib/libclntst9.a
Could you please give me a hand with this?
Cheers!
p.s. I'm using Linux Debian sid
Message was edited by:
Q

Thanks mdtaylor and Madrid....
I don't want to use other dist, I'm in love w/Debian!.
Well, I really appreciate your help guys!, It is working now... I had to install gcc 2.95 and I read the info of the link that Madrid said and it's reaaaally usefull, thanks Madrid!!
I made it work downgrading binutils from 2.17 sid version to the oldstable version, which is 2.15

Oracle 9.2.0.1.0 installed on XP

Similar Messages

Maybe you are looking for