Oracle 9.2.0.1 RedHat 9 kernel 2.4.20-13.9
I try to install Oracle 9.2.0.1 on RedHat 9 kernel 2.4.20-13.9 with glib 2.3.2-27.9 but it hang up on "link pending" and display "copying README". I also try to lunch installer with "LD_ASSUME_KERNEL=2.4.20-13.9" but the problem still remain. How can i do?
Thanks.
Fabrizio Ortolani
someone put the following.. it works for me.. pls try
installed these:
compat-gcc-7.3-2.96.118.i386.rpm
compat-libgcj-7.3-2.96.118.i386.rpm
compat-libgcj-devel-7.3-2.96.118.i386.rpm
nss_db-compat-2.2-20.i386.rpm
made script for kernel settings
$ cat /etc/rc.config
cd /proc/sys/kernel
echo 250 32000 100 128 > sem
echo 2147483648 > shmmax
echo 4096 > shmmni
echo 2097152 > shmall
echo 65536 > /proc/sys/fs/file-max
ulimit -n 65536
echo 1024 65000 > /proc/sys/net/ipv4/ip_local_port_range
ulimit -u 16384
put /etc/rc.config at end of /etc/rc
Similar Messages
-
Oracle 8.1.7 on RedHat 6.2 (kernel 2.2.14-6)
I just installed RedHat 6.2 and I now want to install the Oracle 8.1.7. I read in the installation guide that for this installation I need version 2.2.16 of the Linux kernel. The RedHat 6.2 distribution contains version 2.2.14-6 of the kernel. So I have a few options I would like to hear an opinion about.
- I can upgrade the kernel from 2.2.14-6 to 2.2.16. Anybody done this? I found very little information about it on the net. Also I am an inexperienced Linux user. Is it wise?
- I can decide to ignore the version difference and install Oracle 8.1.7 on the kernel 2.2.14-6. Anybody know how severely punished I will be for this?
- I can install Oracle 8.1.6 instead. I also want to install Oracle Application Server 9i. Is this possible in combination with Oracle 8.1.6? Will I miss the extras of Oracle 8.1.7 very much? Is it later easy to upgrade after all to Oracle 8.1.7?ok i had installed on 2.2.16 y 2.2.18.
if u want to make a kernel update what you should do is to get the new kerner in www.kernel.org and before to do it , you should installed (i.e
cd /usr/src/
rm /usr/src/linux -rf
tar -zxvf kernel2.2.18.tar.gz
go to startx and open a Terminal as a root
make xconfig (to tunne your system)
make bzlilo
your kernel is update?
i hope that this information could help
null -
Install of oracle 8.1.6 on redhat linux
i installed oracle 8.1.6 on redhat linux 7.0
after installation while creating a default
database it is taking lot of time,
i tried to create one more database using database assistant it is also taking lot of time initialize i don't know how to set virtual memaory which we will set in win-nt
please write me anyone who know the problem...
nullDear:
My English is bad, but I think you will understand me what I
saying.I show what i did in my computer system.
First: I download i386-glibc-2.1-linux.tar.bz2,
readme.oracle8i from
ftp://ftp.ca.kernel.org/pub/software/libs/glibc/hjl/sdk/2.1
and
Second : I read the file readme.oracle8i,and do what it
said.
It's ok to solve the problem.
Good Luck. -
Dbassist on Oracle 8.1.7 on Redhat 6.1
Hi there,
I have installed Oracle 8.1.7 on Redhat 6.1 (2.2.16 Kernel). When I execute dbassist for the first time, it works fine, but subsequent executions produce the following error:
SIGSEGV received at befff9dc in /usr/X11R6/lib/libXt.so.6. Processing terminated
Writing stack trace to javacore2909.txt ... OK
I am using JDK 1.1.8 from blackdown.org.
The Stack trace looks like this:
Sun Jan 21 02:37:32 2001
SIGSEGV received at befff9dc in /usr/X11R6/lib/libXt.so.6. Processing terminated
jre full version "JDK 1.1.8 IBM build l118-20000713 (JIT enabled: jitc)"
Operating Environment
Host : hahn.
OS Level : 2.2.16.#4 Sat Nov 18 15:39:12 EST 2000
glibc Version : 2.1.2
No. of Procs : 1
Memory Info:
total: used: free: shared: buffers: cached:
Mem: 264040448 261844992 2195456 174661632 5382144 66072576
Swap: 476614656 978944 475635712
MemTotal: 257852 kB
MemFree: 2144 kB
MemShared: 170568 kB
Buffers: 5256 kB
Cached: 64524 kB
SwapTotal: 465444 kB
SwapFree: 464488 kB
Could you please send your reply to:
[email protected]
Thanks.
- Shyam
nullDeborah,
I really don't think I installed Enterprise Manager Server. I have looked everywhere for the emca configuration assistant and it is just not there. I am running version 3 of oracle 8.1.7 enterprise edition, and I did not remember seeing enterprise manager server on the list of products that would be installed. I did remember seeing enterprise manager components. I am going to try and install again on a different machine and see if enterprise manager server is part of the install.
Tim -
Oracle 9i Release 2 on RedHat 8.0
I have installed Oracle 9i Release 2 on RedHat 8.0 and works perfectly.
You need to follow all the kernel settings as they are stated in the install pdf and
also take a look at www.puschitz.com . The install will stop with an error while comipling but if you follow the instructions at www.puschitz.com everything will work OK. Select create database later, just get the sofware compiled and installed.
EddyI recently read that Mandrake ran some benchmark far faster than Suse ..
Red Hat's announcement of new release coming next spring/summer include
acknowledgement of some architectural problems that'll be fixed ..
Perhaps Mandrake got it right the first time.
Installed OK on RH 7.3 and Mandrake 9.0 (only modified the shmmax parameter).
Some problems in RH 8.0 (runInstaller exited unexpectedly halfway thru the initial configuration phase, then the make failed and I had to use the trick suggested in the excellent online article mentioned by other posts).
Interestingly, at the "46% Database creation phase", I had to wait a very, very long time while installing in RH 8.0, but in Mandrake 9.0 the datadabse creation progressed nicely, without long waits.
Since the installation was on my home machine (AMD XP 1800, 512 Mb DDRAM), I had the luxury of changing the OS (from RH 8.0 to Mandrake 9.0). I know that most people regard Mandrake as a newbie, only-for-home-use Linux, but I found it stable and reliable. Along with Oracle 9i (9.2.0), I also run JDeveloper 9.03, IBM DB2 7.1 and IBM MQ Series. And everything works fine. I might be a bit out of line here, but I believe that RH 8.0 does have some issues (I found some on my own, hence the decision to switch to another flavour, plus check out some Linux forums for a long and growing list of problems). Perhaps sticking with 7.3 for the time being wouldn't be such a bad idea...
Cheers,
George Topfner -
Is Oracle 8 EE available for REdhat Linux 6.0
Would anyone know whether Oracle 8 EE available
for REdhat Linux 6.0 ? Also, what is the fundamental
difference between the standard edition, Oracle 8 and Oracle 8i
for Linux (briefly).
Thanks
Eashwer
nullEashwer Iyer (guest) wrote:
: Would anyone know whether Oracle 8 EE available
: for REdhat Linux 6.0 ? Also, what is the fundamental
: difference between the standard edition, Oracle 8 and Oracle 8i
: for Linux (briefly).
: Thanks
: Eashwer
Oracle 8i for Linux 2.2 kernels (using glibc 2.1) is supposed to
be out the first part of June. I don't know what they will do
about 8SE and 8EE. Maybe supply patches? Anyway, Oracle is
aware of the problems associated with glibc 2.1 and is working on
it.
I installed Caldera Openlinux 2.2 and used a previously installed
Oracle 8EE installation. So far, it is working. I believe they
have said that it should work, but you may encounter a few
errors.
I believe that Oracle 8EE adds Partitioning and Objects. 8i is
made for use with the internet and allows you to create stored
procedures in Java. I have never used the product, but that is
my understanding of it.
I hope this helps.
null -
Unable to start ORACLE 8.1.5 on RedHat 6.2
completed installation of Oracle 8.1.5 on Redhat 6.2.
dbassist reports that it had created a database for me.
But I am unable to "STARTUP" the oracle instance successfully.
I get "Load Indicator not supported by OS" message in the "alert" log.
nullSee the solution to that in my FAQ/Miscellaneous section:
http://homepages.tig.com.au/~jmsalvo/linux/oracle8i.html -
BugFix for ProC, Oracle 8.0.5 on RedHat 6.0
BugFix for ProC, Oracle 8.0.5 on RedHat 6.0
since gcc-2.7.x is not part of RH6.0, the include
path in the config specs for the pre-processor has
to be updated. If the include path is not correct,
any inclusion of stdio.h will produce errors,
that the pre-processor can not find stdarg.h and
stddef.h.
Edmund
*** precomp/admin/pcscfg.cfg.org Tue Jun 22 12:13:58 1999
--- precomp/admin/pcscfg.cfg Tue Jun 22 12:15:09 1999
*** 1,4 ****
sys_include=($ORACLE_HOME/precomp/public,/usr/lib/gcc-lib/i386-redhat-linux/2.7.2.3/include/,/usr/
nclude)
include=($ORACLE_HOME/precomp/public)
include=$ORACLE_HOME/precomp/hdrs
include=$ORACLE_HOME/tpcc2x_2/src
--- 1,4 ----
sys_include=($ORACLE_HOME/precomp/public,/usr/lib/gcc-lib/i386-glibc20-linux/egcs-2.90.29/include/
/usr/include)
include=($ORACLE_HOME/precomp/public)
include=$ORACLE_HOME/precomp/hdrs
include=$ORACLE_HOME/tpcc2x_2/src
nullI tried it, it worked!
You have a beer waiting for you in Vancouver BC.
thewils
Edmund Mergl (guest) wrote:
: BugFix for ProC, Oracle 8.0.5 on RedHat 6.0
: since gcc-2.7.x is not part of RH6.0, the include
: path in the config specs for the pre-processor has
: to be updated. If the include path is not correct,
: any inclusion of stdio.h will produce errors,
: that the pre-processor can not find stdarg.h and
: stddef.h.
: Edmund
: *** precomp/admin/pcscfg.cfg.org Tue Jun 22 12:13:58
1999
: --- precomp/admin/pcscfg.cfg Tue Jun 22 12:15:09 1999
: *** 1,4 ****
: sys_include=($ORACLE_HOME/precomp/public,/usr/lib/gcc-lib/i386-
redhat-linux/2.7.2.3/include/,/usr/include)
: include=($ORACLE_HOME/precomp/public)
: include=$ORACLE_HOME/precomp/hdrs
: include=$ORACLE_HOME/tpcc2x_2/src
: --- 1,4 ----
: sys_include=($ORACLE_HOME/precomp/public,/usr/lib/gcc-lib/i386-
glibc20-linux/egcs-2.90.29/include/,/usr/include)
: include=($ORACLE_HOME/precomp/public)
: include=$ORACLE_HOME/precomp/hdrs
: include=$ORACLE_HOME/tpcc2x_2/src
null -
How Install Oracle 8.1.7 on RedHat 7.3
Hello!
I want install Oracle 8.1.7 on RedHat 7.3. I follow the steps in book InstallGuid, but when I run runInstaller, I get the error: map failed.
How can I install Oracle 8.1.7 on RedHat 7.3.
My email is: [email protected]
Thanks,
David Lin<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Matt:
Hi,
I am a newbie and would like to install Oracle 8.1.7 on RedHat Linux,
so RedHat 6.2 or RedHat 7.0
which one is the easier installation for
me(both new in Oracle & Linux)?
Many thanks,
Matt<HR></BLOCKQUOTE>
I think 6.2 is easier, just follow read me instruction, on redhat 7.0 you must run patch to downgrade glibc from 2.2 to 2.1
null -
Problem in installing Oracle 8.0.5 in RedHat 6.1
Hi there,
Did any body installed Oracle 8.0.5 in RedHat linux 6.1. successfully
Its hell man.
1. I am not able to visit Oracle Web site, however I could able to visit all other web site
2. at the time of oracle installation, it gives error message unable to run svrmgrl
Any help is greatly appreciated
thanks
siva
nullHallo !
Three weeks ago I had successfully installed Oracle 8.0.5 on RedHat 6.1; some tips:
As described in ftp://ftp.oracle.com/pub/www/otn/linux/README download the five compaitibility RPMS
compat-binutils-5.2-2.9.1.0.23.1.i386.rpm
compat-egcs-5.2-1.0.3a.1.i386.rpm
compat-egcs-c++-5.2-1.0.3a.1.i386.rpm
compat-glibc-5.2-2.0.7.1.i386.rpm
compat-libs-5.2-1.i386.rpm
(I have got them from
ftp://ftp.tuwien.ac.at/opsys/linux/redhat.com/dist/old-releases/redhat-6.0/i386/RedHat/RPMS/
and install them.
The glibcpath.tgz is available from OTN. Install it as described in the ORACLE RAEDME.
Good luck !
Heinz -
Oracle 8.1.5 nad RedHat 7.0 Instalation
Hi
I have problem with instalation of Oracle 8.1.5 on RedHat 7.0.
I tried to follow the documentetion of Oracle but with no result.
Is anyone who can tell me what should I do.
What install ( and how to do it)? Where and what should I write?
Please HelpEven i have the same problem installing oracle 8.1.6. I tried tracing using strace and found the jre is going in a loop with
SIGNAL SIGSEGV segmentation violation. Is there any work around for this
possible reasons
1. GLIC compatability 2.1 is required.
i havent tried yet but i believe this should work, before starting runInstaller
export LD_ASSUME_KERNEL=2.2.(5 or 14).
run /usr/i386-glibc21-linux/bin/i386-glibc21-linux-env.sh
still if it doesnt try the patch
glibc-2.1.3-stubs.tar
could any one think of an alternative.
please please post the feedback
thanks
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Andrew Williams:
I am trying to Install Oracle 8.1.6 (Enterprise edition provided with the book Oracle 8i for Linux starter kit!!) on red hat 7.1. I have tried many of the options given previously, but I still can not install it. I have downloaded the compat glibc 2.1.3.2 and copied the files etc, but when I run the "runInstaller" from the command line, all I get is:
"[oracle] /mnt/cdrom=$ Initializing Java Virtual Machine from ../stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expanded/linux/bin/jre. Please wait..." It eventually comes back to the command prompt, but no GUI insatller. Any ideas???<HR></BLOCKQUOTE>
null -
Hi,
I am a newbie and would like to install Oracle 8.1.7 on RedHat Linux,
so RedHat 6.2 or RedHat 7.0
which one is the easier installation for
me(both new in Oracle & Linux)?
Many thanks,
Matt<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Matt:
Hi,
I am a newbie and would like to install Oracle 8.1.7 on RedHat Linux,
so RedHat 6.2 or RedHat 7.0
which one is the easier installation for
me(both new in Oracle & Linux)?
Many thanks,
Matt<HR></BLOCKQUOTE>
I think 6.2 is easier, just follow read me instruction, on redhat 7.0 you must run patch to downgrade glibc from 2.2 to 2.1
null -
Oracle 8.1.5 on Redhat 6.0
I have installed Oracle 8.1.5 on Redhat 6.0 after many attempts.
I have tried to apply the patch by running the script linux_81501patch_ee.sh but got many compilation errors.
For example, in the compilation of sqlplus, I got the following errors:
/home/oracle/lib/nautab.o(.rodata+0x8): undefined reference to `nauzaoss'
collect2: ld returned 1 exit status
gmake: *** [sqlplus] Error 1
Anybody got any idea ??I've been dealing with the same problems in the english version but could bypass thiss by doing the folowing.
-Just ignore the disk space stuff
-Ignore the charset message, also
-When creating a database, choose custom and then select the WE8ISO8859P1 char set. It worked for portuguese, must work for french also.
-Everyone here recommended, and I do the same, leave the database creation for later, not during instalation.
Good Luck! -
Problems With Oracle 8.1.7 on RedHat 7.1
Hi,
I can not even start the installation program, it just stays in
there with out any response or feed back it never launches the
installation screen.
Can some body help me?
Thanx Alot!
Jetgot this info from different posts & other sources, here it is
in one
place, here's what worked for me:
to install oracle 8.1.7 on redhat 7.1 (i686):
1. make sure you have oracle 8.1.7.1 (this is release 3), the
latest
ver on the oracle d/l site
2. download the stub file they have on the same d/l page-
glibc-2.1.3-stubs.tar.gz
3. set up your oracle mount points, groups, etc as per oracle
instructions
4. untar the oracle817 file
4. add this to your oracle user's .bash_profile (or however you
set
env variables):
LD_ASSUME_KERNEL=2.2.5
(and add LD_ASSUME_KERNEL to the export line as well)
5. instead of running ./runInstaller, like oracle says, use
install/linux/runInstaller (this one works)
6. I chose a pretty slim install- none of the oracle optional
features
(esp not the apache module, which needs the 118 jvm). Definitely
tell
it not to create a database during the install (won't work).
7. Two kinds of errors can happen during the install:
installation
errs (which I didn't get, but which I have read can be solved by
copying the files oracle says it can't copy by hand) and linking
errors, which are expected.
8. fixing the linking errors- this is done with the stub lib
supplied
by oracle. although the readme that accompanies it (on the oracle
site) says to perform an install, then install the stub lib, it
worked
for me to:
-perform the install
-at the first linking error (error in invoking target
relink of
makefile...), it will ask you abort/retry/ignore, open another
terminal window and install the stub lib as per the oracle
instructions. (except for one thing: although the file has a .gz
extension, it is really just a tar file, so skip the z option,
e.g.
use tar xvf glibc-2.1.3-stubs.tar.gz). once the stub lib is
installed,
hit retry on the error message dialog.
9. last step: when the installer asks you to run root.sh as root,
don't- there is a syntax error in root.sh you have to fix first.
it is
on line 155 and is missing a single quote near the end. change
it from
RUID=`/usr/bin/id|$AWK -F\( '{print $2}'|$AWK -F\) '{print $1}`
to
RUID=`/usr/bin/id|$AWK -F\( '{print $2}'|$AWK -F\) '{print $1}'`
save it and run it. this got me through the install process with
no
errors. -
Oracle 8.1.6 on RedHat 8.0 libjox8.so problems
hi,
i have installed oracle 8.1.6 on RH 8. i did not create database
at install time.
After installation i applied the glibc-stubs patch from otn. Then i
started dbassist utility to create database.
After dbassist wizard has finished and database creation has started i
get an error "ORA-12547: TNS:lost contact"
when i start
sqlplus with scott/tiger i get the following error :
relocation error: /ora01/app/oracle/product/8.1.6/lib/libjox8.so:
undefined symbol: __fixunssfdi
ORA-12547: TNS:lost contact
Can somebody help me out with this problem.
Thanx in advance
Tejas Arun Kokje
Project Trainee
DDE-ORG (www.ddeorg.com)Dear Arun,
I am not been able to install oracle 8.1.6 on Redhat 8.0 Please send me the installation procedure.
Thanking you
Pravin Takpire
ICFAI B School, Pune -
Problems in Pro*C installation for Oracle 8.1.7 on Redhat Linux 6.2
Hello,
I have installed Oracle 8.1.7 on Redhat Linux 6.2. After installing Proc and doing necessary changes in pcscfg.cfg file. I tried to compile demo programs. But I am getting following error while compiling.
Syntax error at line 368, column 19, file /usr/include/libio.h:
Error at line 368, column 19 in file /usr/include/libio.h
extern IOsize_t IOsgetn __P ((_IO_FILE *, void *, IOsize_t));
..................1
PCC-S-02201, Encountered the symbol "_IO_sgetn" when expecting one of the follow
ing:
; , = ( [
The symbol ";" was substituted for "_IO_sgetn" to continue.
I have tried changing paths, but still the error persists. If I do following change in sample file. The program is getting compiled.
#ifndef ORA_PROC
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <sqlda.h>
#include <sqlcpr.h>
#endif
Can anyone suggest how can I get successful compilation without ORA_PROC usage.
Thanks & Best Regards,
Swati Deval.Hello,
I tried to install Oracle 8.1.7 on Redhat Linux WS 2.1 and here is the make.log
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/home/oracle/OraHome1
(if [ "compile" = "compile" ] ; then \
/home/oracle/OraHome1/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\
rm -f /home/oracle/OraHome1/lib/ntcontab.o ;\
mv ntcontab.o /home/oracle/OraHome1/lib ;\
/usr/bin/ar rv /home/oracle/OraHome1/lib/libn8.a /home/oracle/OraHome1/lib/ntcontab.o ; fi)
/bin/sh: cc: command not found
mv: cannot stat `ntcontab.o': No such file or directory
/bin/sh: /usr/bin/ar: No such file or directory
make: *** [ntcontab.o] Error 127
Any idea?
Maybe you are looking for
-
Any solutions for "Export process terminated unexpectedly [11]" problem?
Hey guys, I'm trying to simply use Quicktime Pro (Version 7.6.6 Build 1632) to enable the "Fast Internet Start" feature of a 640 x 480 video H.264 video. It uses 16-bit Little Endian for audio, if that's of any help. Anyway, like lots of other users
-
Exception in Server Logs : JMSCC0033 While using Weblogic 10.3.X and MQ 7
Following exception is contuniously occuring in Weblogic Managed Server Logs after migrating to IBM MQ 7. com.ibm.msg.client.jms.DetailedIllegalStateException: JMSCC0033: A synchronous method call is not permitted when a session is being used asynchr
-
Hey, I've got the Sun Java Studio Enterprise 8.1 installed and would like to upgrade the J2EE from 1.4 to J2EE 5. I've downloaded the J2EE sdk 5 and installed it and used the upgrade option within the installer, however I am not able to change the J2
-
I tried to rent a movie (Mean Girls) to watch with my daughter this evening. It was downloading really slow. After about 45 minutes it had only downloaded about 5%. my daughter gave up and went to bed. Can I return this and get my money back? I was t
-
IPod Touch - Device cannot start (code 10)
I am unable to ge iTunes to recognize my new iPod Touch. When I plug it in, it installs the device and states "A problem occurred during the installation...." and when I view the device in Computer Management it has a yellow exclamation point. It doe