Oracle 9.2.0.3 or 9.2.0.4 on Win 2000

In the OTN downloads page, I see that I can download the database for version 9.2.0.1 (Standard Edition), for Win 2000.
I have been informed that the Developer Suite for 9i, with the 9.2.0.6.0 patch, is certified to run with database 9.2.0.3 or 9.2.0.4.
My question: Is database 9.2.0.3 (or 9.2.0.4) also available as an OTN download? If so, how can I access it?
Alternately: Does anyone have reliable information as to whether Developer Suite 9i (with patch 9.2.0.6.0) can also run against database 9.2.0.1? (All on Win 2000).
I am stressing the patch 9.2.0.6.0 issue, as I am told that prior to this patch, there were problems with setting up the Repository (needed for working with Designer).
Thanks in advance for any information on this.
Eliram Braudo

Nope. There is no Database 9.2.0.3 for Win 32-bit (cd-pack/full release).
There is Database 9.2.0.1 (full release) and Patch Sets that brings it up to 9.2.0.3 (or .4 or .2). Patch Sets are, as I know, only available from Metalink with a valid support contract.
Note that AS and DS are 9.*0*.2. (confusing, yeah!)
Here on OTN we can find:
Oracle9i Designer Release 9.0.2.6.0 - a full, patch release for Oracle9i Designer
(You must install this over your Oracle9i DS installation)
Note the difference - patchset is for Designer/Repository 9i as part of DS, not the whole DS product stack (latest patchset for Forms & Reports is 9.0.2.3 I think). Patching Oracle (except for DB) is messy as always I guess ;)
I would guess that Oracle Support recommends to have DS patchset 9.0.2.2 installed also...
And cert info includes a requirement for at least 9.2.0.3 (DB) so I guess you have smoe patching to look forward to ;-D
Hth
Fredrik

Similar Messages

Oracle 8.1.6 On Win'2000 Server 5.00.2195 SP1

I tryed to Installed Oracle 8.1.6 On Win'2000 Server 5.00.2195 (Stardard Edition) SP1....The Moment I clicked on Oracle Universal Installers mail page "Install" the page closes down and the next page never comes...
Please Help !!!!!

Hi,
I don't have a suggestion, but I can say that I am running fine with the exact same configuration. Win2k server, sp2 and Oracle 8.1.6.

Oracle 10g problem on win 2000 server!!

Hi,
I have installed oracle 10g on win 2000 server with service pack 4 to my home machine but the problem I am facing is that when I start my db on the system my system gets slow it consumes most of the Ram.I alter few SGA parameters in init.ora file but the problem continues to be effect me.I need to get around that problem asap hope you guys help me as u did in past....
thanks a lot...

Hi,
It's 128MB should i expand it? or what abt oracle 9i if i uninstall of oralce 10g.act I was earlier using oralce 9i.I would like to know that all the commands which used to support to oracle 9i will it support completly to 10g.
thanks a lot..

Problem installing Oracle 9i database entreprise edition on win 2000 server

Hi,
I am trying to install the oracle 9i database 2.0(release2) on Win 2000 server and get this error message.
"Couldn't connect to the server - Please check the network and that server daemons are running. (Socket error 10061).
Could somebody help...........
Thanks in advance.
Maya

hi,
try to install service pack for windows 2000 and try.

Connecting to Oracle 8i in Win 2000

Hi All,
When i try to connect forms6i with the DB[Oracle 8i] in Win 2000 I get an error stating TNS could not resolve service name. The error number is ORA-12154.
Thanx
null

Hi "User", seems you have the same problem
like all that do their first-time install :-)
Forms uses a different Oracle_HOME (required by setup), and hence does not "see" the "settings" of the normal client.
Try the following:
- Set up a connection with NET80-Tools
- Test with SQL*PLUS
- Copy "tnsnames.ora" from the Client-81-Home
to the forms-Home, e.g.
cd ORACLE/FORMS/NET80/ADMIN
copy ORACLE/ORA81/NETWORK/ADMIN/tnsnames.ora
Of course, you'll have to check for YOUR
directory names...this is just a samples, resp. mthe setup of a machiche I configured yesterday. HTH.
/M.
null

What i need to have to run oracle 10g on win 2000 server.

hi,
I want to install oracle 10g on win 2000 server,what should I need to do to install oracle 10g.
thanks Alok kumar

Hi...
Try check http://tahiti.oracle.com
There are complete documentation and also installation guide for Windows where pre-requisites are included.

Install oracle 8.1.7 win 2000

Check this link if your computer have a P4.
http://support.intel.com/support/processors/pentium4/issues.htm

I have the same problem, I have been told it is because MTS can't view the DBA_PENDING_TRANSACTIONS on the Oracle db to see if the transaction went ok. I am connecting to oracle 7.3, and I think these views are named differently, but I can't find any if on configuring Oracle 7. If you get any more info let me know!
Cheers

Error 1053 the oracle(8.1.6) service is not starting on a fresh windows 2000 install

Can anyone help!!!!!!!!
Oracle service does't start on windows 2000 gives error:
Could not start the oracle service on Local computer
Error 1053: The service did not respond to start or control
request in a timely fashion.

Can anyone help!!!!!!!!
Oracle service does't start on windows 2000 gives error:
Could not start the oracle service on Local computer
Error 1053: The service did not respond to start or control
request in a timely fashion. This is what I did to start the oracle service..
1. Change the startup type to manual in the windows service panel
2. Restart the Windows 2000 PC
3. Start the Oracle service by clicking the start button in the services window.
4. It will hit the same error ie 1053..
5. Now kill the oracle process using windows Task Manager
6 Once again go back to services window and click the start button
7. It will show the status meter window with a close button..
8. After the status meter crosses halfway hit the close button..
9. Your oracle process is started now..

Installing Oracle 8.1.7 with PS on Win 2000 cluster

Sorry for bad English.
I'm have problem. I have Oracle 8.1.7 with PS. I need setup Oracle with Parallel Server on cluster with Windows 2000 AS, but during setup Oracle no found cluster. In documentation talk about need Operation System Depend layer from vendor OS.
What me do? Where take OSD? Where reason?

Hi Satish,
You need to install "Oracle Data Provider for .NET" on the target machine, and it needs to be the same version as the one you used to build the assemblies.
Christian Shay
Oracle

Error in Installing Oracle 9iAS 1.0.2.2.1 on win 2000

While installing Ora 9iAS 1.0.2.2.1 on win2K, It gives me following error and stops..
Not all the dependencies for the component Oracle Enterprise Manager Common Files 2.2.0.0.0 are found. Missing Component oracle.swd.jre 1.1.8.10.0.
This product is installed on the machine and the path variable also contains the entry for it.
Any ideas ????

Hi,
Are you installing from Software CD?
If you have downloaded it from the OTN, check the size of Software. This error is thrown when the downloaded software is not proper or corrupted.
Try downloading the compatiable OS specific software again. Check the size of the software and install it again.
-Priyanka

Weblogic 6.1 with Oracle 9i on Win-2000

Hi
Is there a driver that is compatible for Weblogic 6.1 and Oracle 9i(9.0) on Windows
2000 environment? I tried the classes12.zip from oracle home\sid\jdbc\... but
the error I get is "No suitable Driver found"..when the Connection Pool starts.
Please suggest the right way...
Thanks
Ankur
Principal Consultant
Keane Inc.
603-682-7035

Ankur,
Not yet, but expected soon. Please download the one from oracle's site.
Ankur Sinha wrote:
Hi
Is there a driver that is compatible for Weblogic 6.1 and Oracle 9i(9.0) on Windows
2000 environment? I tried the classes12.zip from oracle home\sid\jdbc\... but
the error I get is "No suitable Driver found"..when the Connection Pool starts.
Please suggest the right way...
Thanks
Ankur
Principal Consultant
Keane Inc.
603-682-7035

Oracle Apps 11i under Win 2000/NT

I'm having some problems installation 11i with rapid install. I'm trying to install the visions demo but can't seem to get it right. The following are the things that I did.
1. Fresh install of Windows (2000 twice and NT server once, both without IIS install)
2. Using windowsupdate, applied all patches and rebooted
3. created USER ORACLE and USER APPLMGR. Logon as ORACLE user Copied all cd's to STAGE11i directory
4. Ran rapid install wizard and selected single node install
5. Unselected PROD option and selected VIS option
6. Entered password for APPLMGR and complete DNS name for machine and left everything else as default.
7. Rapid install completes with no errors.
Results:
Can bring up oracle install portal but can't log onto apps using logon links. I realized that OracleConcMgrVIS and the webDb listeners (2.2 and 2.5) would not come up under services. Tried starting them manually, OracleConcMgrVIS starts but can't start either WeDB Listener VIS service. What am I doing wrong??? Tried this on both Windows 2000 server and windows NT 4.0 server with similar results!!!
null

Rakesh,
No, we not bounced the database. We will get the outage only by tomorrow.Check if you get the same error after bouncing the database.
When we close the IE and login back its going in with out issue. Is there any other specific issue on why we are getting "Oracle error &ERRNO: &REASON has been detected in &ROUTINE." apart from the org_id & triggers.I guess not.
Note: 311329.1 - Unable to login: &REASON has been detected in &ROUTINE
Note: 464072.1 - Unable to login: &ERRNO: &REASON has been detected in &ROUTINE
Regards,
Hussein

Repair broken Oracle cluster on Win 2000

I have an Oracle cluster (8.1.7. with OFS) running in a Windows 2000 AS environment. There are two nodes and -luckey me- it is on a test network.
A while ago I tried to install OEM in order to be able to configure a OMS.
I performed the install on the inactive node without stopping the Oracle (cluster)services (stupid, stupid....) and broke it off when it hung at the end.
From that moment on this node is no longer available for failover in the cluster. This operation seems to have affected this node's Oracle home. Later on I performed a de-install but this did'nt help.
Now I wonder:
is it possible to repair this 'broken' cluster and if so what would be the procedure to follow?
Thanks in advance,
Georges

At last I solved the problem myself.
On both nodes I desinstalled all Oracle products (Server, Fail Safe..) and later installed them again (first Oracle EE on both nodes, then OFS on both nodes).
Mind that all the fysical files for my databases were still available on SAN disks!
With the ORADIM utility I created services for my two databases on one node.
I recreated the Oracle clustergroup and added the necessary disk resources etc with Cluster administrator (Win2000).
I started Fail Safe Manager and added (one by one) my databases as standalone resources to the Oracle group and went through the verification process without warning.
Now everything is working fine again...

Is Oracle 8.0.4 compatible with Win 2000 Advanced Srv

Sorry this is probably not the right place to post this but if anyone knows or can point me to the right place on how to find out if Oracle 8.0.4 and Windows 2000 Advanced Server with Terminal Server loaded are compatible, I would appreciate it.
TIA

Thanks for the answer. Where in the 6.1 package is the thin driver?
"Michael Girdley" <[email protected]> wrote:
You may be on a platform that does not support our native JDBC Type II
driver.
I do believe that 8.0.5 from Oracle has been removed from support by
Oracle.
You may also want to try the Oracle thin driver, which is available in
the
6.1 package.
Michael Girdley
BEA Systems
Learning WebLogic? Buy the book:
http://www.learnweblogic.com/
"Paul Merrigan" <[email protected]> wrote in message
news:[email protected]..
We're upgrading from WLS 4.5.1 to 6.1 and are having troubles gettinga
connection
to the database. It appears to be looking for libgen.so.1 and cannotfind
it.
Any answers?

WIN 2000 MS Access to Oracle/UNIX

I have data in a MS Access database and need to PULL it into Oracle from the UNIX side.
Do I use ODBC to set this up? I set up ODBC on the UNIX side however I am still unable to pull the data into my Oracle database. From my PC I can use MS Access to PUSH it into Oracle but this is not the solution that has been requested. Has anyone done this?
Thanks
Bev

Bev
well i dont know hot to pull data from msaccess to oracle from unix side but you can do that from windows side
try doing an export like this
select the Access table , click on File -> SaveAs / Export then it will prompt you to select the target location
then select the database and it will ask you the name underwhich it should be saved. give the necessary target
values and there you are. Im able to export the table and data succesfully.
pls try that and let us know if any difficulties
prakash
I have data in a MS Access database and need to PULL it into Oracle from the UNIX side.
Do I use ODBC to set this up? I set up ODBC on the UNIX side however I am still unable to pull the data into my Oracle database. From my PC I can use MS Access to PUSH it into Oracle but this is not the solution that has been requested. Has anyone done this?
Thanks
Bev

Oracle 9.2.0.3 or 9.2.0.4 on Win 2000

Similar Messages

Maybe you are looking for