Oracle 9.2.0.6 and kernel 7.0 ?

Can Oracle 9.2.0.6 run with kernel 7.0?
Or does only Oracle 10g run with kernel 7.0?
Can I upgrade the kernel from 640 to 7.0, then later upgrade Oracel from 9.2.0.6 to 10g?

Hi William,
"Can Oracle 9.2.0.6 run with kernel 7.0?
Or does only Oracle 10g run with kernel 7.0?
Can I upgrade the kernel from 640 to 7.0, then later upgrade Oracel from 9.2.0.6 to 10g? "
"Can Oracle 9.2.0.6 run with kernel 7.0?
Or does only Oracle 10g run with kernel 7.0?"
From the SAP note:
SAP NetWeaver 2004s and SAP Business Suite 2005
SAP NetWeaver 2004s and the SAP products based on it (for example, ERP 05, SCM 05, SRM 05, CRM 05) will only be released on the basis of Oracle Database 10g. The ramp-up of these products, which began at the end of October 2005, was carried out on the basis of Oracle Version 10.1. The use of Oracle Version 10.1 is also supported for live SAP systems. However, you must use at least Oracle patch release 10.1.0.4.
The 7.0 Kernel is technically NW04s. So the answer to your question is 7.0 only runs on 10g.
"Can I upgrade the kernel from 640 to 7.0, then later upgrade Oracel from 9.2.0.6 to 10g? "
Again I don't think so. What you will have is 7.0 on 9i (which is not supported). What is supported is 6.40 on 10g.
So what you could do is the opposite of the question. Upgrade to 10g then upgrade to 7.0
I guess if I have mis-stated anything others will correct me...

Similar Messages

Is it possible to boot oracle vm server over iSCSI and ipxe?

Hi,
Is it possible to boot oracle vm server over iSCSI and ipxe?
I have tried it, but got a kernel panic after the boot progress.
Can anyone tell me what should I do to install and or boot oracle vm server on and from a iscsi lun instead a local hard drive?
Thanks!
Redwan

959211 wrote:
Hi,
I have Windows 2008 R2 64 Bit Operating Server Installed.
Other software that are Installed :
1) Visual Studio 2010 Ultimate 32 Bit.
2) Microsoft SharePoint server 2010 64 Bit.
For my development purpose I want to install both oracle 11g client 32 bit and oracle 11g client 64 on the same machine.
Is it possible to install both 32 and 64 bit instance on the same machine.
Thanks
Sambityes, possible; but minor challenge to manage dynamically
how to ensure that you actually use the flavor you desire?

WARNING:Oracle process running out of OS kernel I/O resources

Hi!
I am getting below warning in the dbwr trace files almost daily at different times:
WARNING:Oracle process running out of OS kernel I/O resources
We are using :
SuSE Linux Enterprise Edition 10 Sp 2
OS Kernel --> 2.6.16.60-0.39.3-smp
Oracle Database 10.2.0.2 64-bit with only 5380055 bug fix applied
Storage: IBM DS 8300
fs.aio-max-nr = 65536
Please help in resolving this issue.
Regards,
Raju

Hi Mark,
Thank u for quick ur reply.
Doc #396057.1 (SuSE 10.2 OS issue) --> This note says "The archiver is getting stuck with ORA-19502 and ORA-27061", whereas in my case I'm not getting any ORA- errors in alert log nor anywhere but only getting these warnings in dbwr trace files that is also intermittently.
I have consulted my system team in regards to disk I/O they said we are using very high end storage and there are no errors or warnings in the OS system logs.
# 415872.1 --> this note says "HUNG DATABASE INSTANCE IF LINUX KERNEL MISS AIO REQUEST". This is not the situation in our case.
#6687381.8 --> says versions confirmed as being affected are 10.2.0.3 and 10.2.0.4
I'm unable to find anything which points to my situation, pls help.
regards,
raju

Oracle process running out of OS kernel I/O resources

Hi All,
Here is our platform:
Oracle Version: 10.2.0.4.0
O/S: Linux x86_64
We are getting the below Error Msg:
ERROR:
===================================================================
WARNING:io_submit failed due to kernel limitations MAXAIO for process=128 pending aio=123 WARNING:asynch I/O kernel limits is set at AIO-MAX-NR=1048576 AIO-NR=64384 WARNING:Oracle process running out of OS kernel I/O resources
===================================================================
To avoid this we recently upgrade the Oracle to 10.2.0.4.0 and applied the below Ipatches also but still we are getting the same error:
p6051177_10204_Linux-x8664.zip
p6024730_10204_Linux-x8664.zip
p5935935_10204_Linux-x8664.zip
p5923486_10204_Linux-x8664.zip
p5895190_10204_Linux-x8664.zip
p5880921_10204_Linux-x8664.zip
p5756769_10204_Linux-x8664.zip
p5747462_10204_Linux-x8664.zip
p5561212_10204_Linux-x8664.zip
p6944036_10204_Linux-x8664.zip
p6826661_10204_Linux-x8664.zip
p6775231_10204_Linux-x8664.zip
p6768114_10204_Linux-x8664.zip
p6679303_10204_Linux-x8664.zip
p6645719_10204_Linux-x8664.zip
p6452766_10204_Linux-x8664.zip
p6379441_10204_Linux-x8664.zip
p6324944_10204_Linux-x8664.zip
p6313035_10204_Linux-x8664.zip
p6151380_10204_Linux-x8664.zip
p6084232_10204_Linux-x8664.zip
p6082832_10204_Linux-x8664.zip
p7573151_10204_Linux-x8664.zip
p7522909_10204_Linux-x8664.zip
p7513673_10204_Linux-x8664.zip
p7300608_10204_Linux-x8664.zip
p7287289_10204_Linux-x8664.zip
p7149863_10204_Linux-x8664.zip
p7027551_10204_Linux-x8664.zip
p6972843_10204_Linux-x8664.zip
p6954829_10204_Linux-x8664.zip
p7592168_10204_Linux-x8664.zip
p8201796_10204_Linux-x8664.zip
p7592346_10204_Linux-x8664.zip
p6705635_10204_Generic.zip
p7252962_10204_Generic.zip
Do we need to set any Oracle parameters?
Thanks And Regards:
Giridhar N

Hi,
under the limits.conf i am seeing the below values:
Added for SAP on 2008-07-17 15:25:47 UTC
@sapsys          soft    nofile          48000
@sapsys          hard    nofile          48000
@sdba            soft    nofile          32800
@sdba            hard    nofile          32800
@dba             soft    nofile          32800
@dba             hard    nofile          32800
still i am getting the same error:
WARNING:io_submit failed due to kernel limitations MAXAIO for process=128 pending aio=127 WARNING:asynch I/O kernel limits is set at AIO-MAX-NR=65536 AIO-NR=65536 WARNING:Oracle process running out of OS kernel I/O resources (1)

New Oracle Linux 6 installation - ASMLib and EMC Powerpath - is it possible

Hi everyone,
I would like to ask whether that latest version of Oracle Linux 6 can be used for a new installation (one that will replace Windows) to serve as that basis for Oracle RAC.
The storage is a high-end EMC Clariion.
I want to use the Unbreakable Enterprise Linux 2.
I would like to use EMC Powerpath, but it seems this is not yet available (or at list not present in the current EMC support matrix).
I want to use ASMLib, but if have to use redhat compatible kernel (so that I can use Powerpath), I will not be able to use ASMLib (AFAIK).
Does anybody has experience with this problem? What would you recommend?
I'm putting a list of possile options that I am aware of:
1. Use OEL5 with redhat compatible kernel (use Powerpath and ASMLib).
2. Use OEL6 with UEK2 kernel, but don't use Powerpath (use dm-multipath and ASMLib)
3. Use OEL6 with redhat compatible kernel (use Powerpath and don't use ASMLib, but use udev for persistent device permissions and naming)
4. Use SLES11 (with Powerpath and ASMLib)
do you have other suggestions? do you have comments on the pros and cons on this options.
Can someone from EMC or Oracle comment on the plans to make Powerpath available for OL6 with UEK2 ?
Regards,
Mihail

I could test "OEL6 with RHEL kernel + Powerpath" vs "OEL6 with UEK2 kernel + dm-mpio", but anyway this would not give the answer whether Powerpath is faster or slower than dm-mpio by itself, since the kernels would be different.I wonder how the answer whether EMC Powerpath or DM Multipath is faster can help you? Apparently you cannot use Powerpath with the UEK2 kernel and have a certified system at the same time, at least not at this time. However there is no reason to throw the towel yet. If the use of Powerpath instead of Multipath is so critical, why not using Oracle Linux 5.7, which is certified? If you check the EMC compatibility matrix (esm_by_os), it actually shows some systems including Clariion supported for Oracle Linux 6.2 with UEK kernel. You might want to take a closer look.
Anyway, it doesn't look like you will be able to solve the performance question without doing a real world test in your environment. You have no indication that Oracle Linux 6.3 with DM Mutlipath will give you less performance than RHEL 6.3 with Powerpath. Regarding the information you found, Linux is not Windows.
Powerpath is not free and you have to pay a license, but worse, it will tie your system to a very specific version of the kernel. In case of RHEL 6 or later, it will deny you the use of Oracle specific products and features such as ASMLib, etc. Multipath seems to be the more economic and better solution since you do not have to worry about kernel versions and have the freedom to use whatever Oracle Linux has to offer.
So, do you want to limit your kernel features and options and fix a problem that you don't know even know if it applies and pay money for it?
Edited by: Dude on Aug 21, 2012 5:57 PM

Cannot install oracle vpn on linux getting error kernel-sourcecode is neede

cannot install oracle vpn on linux getting error kernel-sourcecode is needed by gds_cisco_vpn_client-2.0-llrhel4.i386.. i already installed kernel-devel still it get the same error. pls help.

1. kernel (.rpm)
2. kernel-devel (.rpm) - containing only Makefiles and some kernel header files
3. kernel source rpm (src.rpm) - source for rebuilding the kernel
4. kernel-sourcecode (.rpm) - source-tree for developing custom kernels
are four different packages.
If you are running OEL-4 (2.6.9 kernel) and you have an ULN account, you can download kernel-sourcecode rpm from ULN. There is no kernel-sourcecode for OEL-5 available on ULN site.
NJ

Oracle EBusiness suite professions tasks and duties

Hello everybody
I inquire about something regarding Oracle EBusiness suite professions tasks and duties. I've tasked by my manager with writing a report lists the main tasks and key responsibilities for each of the following technical professions within Oracle E Business Environment:
1)-Apps DBA.
2)-Apps Technical Consultant (Apps Developer)
3)-Apps Business Consultant.
I've contacted Oracle Support recently via opening SR .But, They informed me that they don’t provide such information and therefore, they suggest me weather to contact Oracle Consulting to post here.
I would appreciate your help.
Sami

I don't see how you'd be able to integrate OAM with EBS unless you have the oSSO (assuming of course that you're not on the bleeding edge, per 975182.1).
We are running the same configuration and have setup the redirects in OAM policy. We setup specific context roots for each application, then use OAM policy to redirect. (for example, http://iwa-server/ebs redirects to https://ebs-server)
Unique authorization rule for each redirect, then a unique "policy" on the "Policies" tab for each redirect. Each Policy maps to the respective Authorization Rule.

[solved]wacom doesn't work after upgrade to xorg 1.6 and kernel 2.6.29

hello..
i have already posted about that in testing-forums, but since xorg 1.6 and kernel 2.6.29 have moved to extra, though i'd create a seperate topic about that.
after i have upgraded to xorg 1.6 and kernel 2.6.29 my wacom device (as built-in, not usb) on my thinkpad x41t stopped working.
before upgrade i have used xorg with hotplugging enabled. everything worked fine.
after wacom stopeed working i removed everything regarding input devices from xorg.conf -> no change
put an fdi-file for wacom -> no change
installed linuxwacom-dev -> no change
i don't really know, if it's a kernel or an xorg issue. loading wacom drivers manually still doesn't solve the problem. no warnings or errors about wacom in xorg-log or messages.log
how could i check, wether my system recognizes the device properly at all? it doesn't show up in lspci or in lsusb.
any help would be great.
Last edited by lynucs (2009-04-14 18:57:17)

well, upgraded again to xorg-server 1.6, disabled hotplugging, installed linuxwacom-dev from aur and the wacom works as allways. (had to edit xmodmap one more time, since kbd returns other keycodes than evdev does :-| ). no matter, done is done.
but intel driver returns broken graphics if i rotate screen with xrandr.
i guess there is no way around this execpt switching to the ultra-slow legacy driver?
just for comparison - glxgears fps:
intel: ~900fps
intel-legacy: ~280fps
Last edited by lynucs (2009-04-14 18:56:48)

Hard Feezing and Kernel Panics - Early 11 MBP

Hey just wondering if anyone has any insight into this...
I've been experiencing hard freezing and kernel panics on my Early 11 Macbook Pro for several months. The hard freezing only happens when I wake up my system from sleep. I'll open the lid and when it happens, within seconds, everything locks up. No spinning wheel, just frozen machine and I have to do a hard reboot. I also get random kernel panics as well.
I took it in the the Genius Bar a few weeks ago, they ran tests and said the hardware was all fine and that I should reinstall Lion after a clean format. Well I did that and still having issues. Not sure if it's being caused by a 3rd party app...or if I really do have bad hardware after all.
When they did a diagnostic they said that 'soundflower' was showing up in my kernel panic log and that I should find what that is and delete it, so I did. In my most recent and only kernel panic, shown below, I don't see any 3rd party language anywhere.
Anyone have an idea of what might be causing this?
Interval Since Last Panic Report: 534787 sec
Panics Since Last Report:          1
Tue Jul 24 00:30:37 2012
panic(cpu 4 caller 0xffffff80002c473a): Kernel trap at 0xffffff7f816eb67c, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff83a69dd370, CR3: 0x0000000040436042, CR4: 0x00000000000606e0
RAX: 0x0000000080000000, RBX: 0x00000000cccccccc, RCX: 0x00000000cccccccc, RDX: 0x00000000cccccccc
RSP: 0xffffff807f363860, RBP: 0xffffff807f363880, RSI: 0xffffff80736aa040, RDI: 0xffffff800be74600
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0xffffff7f8191dd70, R11: 0x0000000000000002
R12: 0x000000000000000f, R13: 0xffffff800be74600, R14: 0xffffff80736aa040, R15: 0xffffff800be74600
RFL: 0x0000000000010206, RIP: 0xffffff7f816eb67c, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff83a69dd370, Error code: 0x0000000000000002, Faulting CPU: 0x4
Backtrace (CPU 4), Frame : Return Address
0xffffff807f363510 : 0xffffff8000220792
0xffffff807f363590 : 0xffffff80002c473a
0xffffff807f363740 : 0xffffff80002da0cd
0xffffff807f363760 : 0xffffff7f816eb67c
0xffffff807f363880 : 0xffffff7f816ec061
0xffffff807f3638d0 : 0xffffff7f816f76d3
0xffffff807f3638f0 : 0xffffff7f816f7b2c
0xffffff807f363910 : 0xffffff7f816d53c4
0xffffff807f363960 : 0xffffff7f816d6852
0xffffff807f3639b0 : 0xffffff7f816d3f2c
0xffffff807f363a00 : 0xffffff7f81695829
0xffffff807f363a40 : 0xffffff7f816d7d85
0xffffff807f363a90 : 0xffffff7f81698d64
0xffffff807f363b60 : 0xffffff7f81695ecb
0xffffff807f363bc0 : 0xffffff800065501e
0xffffff807f363be0 : 0xffffff80006558fa
0xffffff807f363c40 : 0xffffff800065609b
0xffffff807f363d80 : 0xffffff80002a3f08
0xffffff807f363e80 : 0xffffff8000223096
0xffffff807f363eb0 : 0xffffff80002148a9
0xffffff807f363f10 : 0xffffff800021bbd8
0xffffff807f363f70 : 0xffffff80002aef20
0xffffff807f363fb0 : 0xffffff80002daa33
      Kernel Extensions in backtrace:
         com.apple.ATIRadeonX3000(7.1.8)[BB62D2AF-725C-3D33-8009-C51F397EBB72]@0xffffff7 f8168c000->0xffffff7f81926fff
            dependency: com.apple.iokit.IOPCIFamily(2.6.8)[06C77CAA-586C-3AA7-94B7-A544F470025E]@0xffff ff7f80858000
            dependency: com.apple.iokit.IONDRVSupport(2.3.2)[D05CFB53-FB72-3613-8162-2D188DB04738]@0xff ffff7f80cff000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.2)[2D2A4A31-EB4F-3730-BE3A-76C061685FC5]@0 xffffff7f80cc7000
BSD process name corresponding to current thread: Twitter
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 1401075635774
last loaded kext at 162719058388: com.apple.filesystems.smbfs    1.7.2 (addr 0xffffff7f80791000, size 241664)
last unloaded kext at 99396494277: com.apple.driver.AppleUSBUHCI    4.4.5 (addr 0xffffff7f80ad6000, size 65536)
loaded kexts:
com.apple.filesystems.smbfs    1.7.2
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.driver.AppleMikeyHIDDriver    122
com.apple.driver.AudioAUUC    1.59
com.apple.driver.AppleUpstreamUserClient    3.5.9
com.apple.driver.AppleMCCSControl    1.0.26
com.apple.driver.AppleHDA    2.2.0f3
com.apple.driver.AppleMikeyDriver    2.2.0f3
com.apple.driver.AppleIntelHD3000Graphics    7.1.8
com.apple.driver.AGPM    100.12.42
com.apple.kext.ATIFramebuffer    7.1.8
com.apple.driver.SMCMotionSensor    3.0.2d6
com.apple.driver.AppleSMCPDRC    5.0.0d0
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.iokit.IOBluetoothSerialManager    4.0.5f11
com.apple.driver.AppleSMCLMU    2.0.1d2
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AudioIPCDriver    1.2.2
com.apple.driver.AppleMuxControl    3.0.16
com.apple.driver.ACPI_SMC_PlatformPlugin    5.0.0d0
com.apple.ATIRadeonX3000    7.1.8
com.apple.driver.AppleLPC    1.5.8
com.apple.filesystems.autofs    3.0
com.apple.driver.AppleUSBTCButtons    225.2
com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.5f11
com.apple.driver.AppleUSBTCKeyboard    225.2
com.apple.driver.AppleIRController    312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    33
com.apple.iokit.SCSITaskUserClient    3.2.0
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCISerialATAPI    2.0.3
com.apple.iokit.IOAHCIBlockStorage    2.0.3
com.apple.driver.AppleUSBHub    4.5.0
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleFWOHCI    4.8.9
com.apple.driver.AirPort.Brcm4331    530.4.20
com.apple.driver.AppleSDXC    1.2.0
com.apple.iokit.AppleBCM5701Ethernet    3.1.2b2
com.apple.driver.AppleEFINVRAM    1.5.0
com.apple.driver.AppleAHCIPort    2.3.0
com.apple.driver.AppleUSBEHCI    4.5.8
com.apple.driver.AppleACPIButtons    1.5
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.6
com.apple.driver.AppleSMBIOS    1.8
com.apple.driver.AppleACPIEC    1.5
com.apple.driver.AppleAPIC    1.5
com.apple.driver.AppleIntelCPUPowerManagementClient    193.0.0
com.apple.nke.applicationfirewall    3.2.30
com.apple.security.quarantine    1.3
com.apple.driver.AppleIntelCPUPowerManagement    193.0.0
com.apple.driver.DspFuncLib    2.2.0f3
com.apple.driver.AppleSMBusController    1.0.10d0
com.apple.iokit.IOSurface    80.0.2
com.apple.iokit.IOSerialFamily    10.0.5
com.apple.iokit.IOFireWireIP    2.2.4
com.apple.iokit.IOAudioFamily    1.8.6fc17
com.apple.kext.OSvKernDSPLib    1.3
com.apple.driver.AppleHDAController    2.2.0f3
com.apple.iokit.IOHDAFamily    2.2.0f3
com.apple.driver.ApplePolicyControl    3.0.16
com.apple.driver.AppleGraphicsControl    3.0.16
com.apple.driver.AppleSMC    3.1.3d8
com.apple.driver.IOPlatformPluginLegacy    5.0.0d0
com.apple.driver.AppleSMBusPCI    1.0.10d0
com.apple.driver.AppleBacklightExpert    1.0.3
com.apple.iokit.IONDRVSupport    2.3.2
com.apple.driver.IOPlatformPluginFamily    5.1.0d17
com.apple.kext.ATI6000Controller    7.1.8
com.apple.kext.ATISupport    7.1.8
com.apple.kext.triggers    1.0
com.apple.driver.AppleIntelSNBGraphicsFB    7.1.8
com.apple.iokit.IOGraphicsFamily    2.3.2
com.apple.driver.AppleThunderboltDPInAdapter    1.8.2
com.apple.driver.AppleThunderboltDPAdapterFamily    1.8.2
com.apple.driver.AppleThunderboltPCIDownAdapter    1.2.4
com.apple.driver.AppleUSBBluetoothHCIController    4.0.5f11
com.apple.iokit.IOBluetoothFamily    4.0.5f11
com.apple.driver.AppleUSBMultitouch    227.1
com.apple.iokit.IOUSBHIDDriver    4.4.5
com.apple.driver.AppleUSBMergeNub    4.5.3
com.apple.driver.AppleUSBComposite    4.5.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.0
com.apple.iokit.IOBDStorageFamily    1.6
com.apple.iokit.IODVDStorageFamily    1.7
com.apple.iokit.IOCDStorageFamily    1.7
com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.0
com.apple.driver.AppleThunderboltNHI    1.5.5
com.apple.iokit.IOThunderboltFamily    2.0.0
com.apple.iokit.IOUSBUserClient    4.5.8
com.apple.iokit.IOFireWireFamily    4.4.5
com.apple.iokit.IO80211Family    420.3
com.apple.iokit.IOEthernetAVBController    1.0.1b1
com.apple.iokit.IONetworkingFamily    2.1
com.apple.iokit.IOAHCIFamily    2.0.8
com.apple.iokit.IOUSBFamily    4.5.8
com.apple.driver.AppleEFIRuntime    1.5.0
com.apple.iokit.IOHIDFamily    1.7.1
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    177.5
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.DiskImages    331.6
com.apple.iokit.IOStorageFamily    1.7.1
com.apple.driver.AppleKeyStore    28.18
com.apple.driver.AppleACPIPlatform    1.5
com.apple.iokit.IOPCIFamily    2.6.8
com.apple.iokit.IOACPIFamily    1.4
Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.2 GHz, 4 GB, SMC 1.69f3
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 1024 MB
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.198.4.20)
Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK7559GSXF, 750.16 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfa100000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0245, 0xfa120000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 7
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3

BSD process name corresponding to current thread: Twitter
Try either uninstalling Twitter or just don't use it. See if this stops the kernel panics.
Clinton

Nvidia is not working after upgrading nvidia driver and kernel

I upgraded nvidia driver and kernel. After rebooting graphic mode is not working. Here xorg.o.log
[ 281.180]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 281.181]
X.Org X Server 1.10.0.902 (1.10.1 RC 2)
Release Date: 2011-04-08
[ 281.181] X Protocol Version 11, Revision 0
[ 281.181] Build Operating System: Linux 2.6.38-ARCH i686
[ 281.181] Current Operating System: Linux localhost 2.6.38-ARCH #1 SMP PREEMPT Wed Mar 30 07:14:27 UTC 2011 i686
[ 281.181] Kernel command line: BOOT_IMAGE=/boot/vmlinuz26 root=/dev/disk/by-uuid/b766e332-2aad-4047-8562-567180150189 ro quiet
[ 281.182] Build Date: 11 April 2011 10:49:12AM
[ 281.182]
[ 281.182] Current version of pixman: 0.20.2
[ 281.182] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 281.182] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 281.183] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 14 17:11:37 2011
[ 281.183] (==) Using config file: "/etc/X11/xorg.conf"
[ 281.183] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 281.183] (==) ServerLayout "Layout0"
[ 281.183] (**) |-->Screen "Screen0" (0)
[ 281.183] (**) | |-->Monitor "Monitor0"
[ 281.184] (**) | |-->Device "Videocard0"
[ 281.184] (**) |-->Input Device "Keyboard0"
[ 281.184] (**) |-->Input Device "Mouse0"
[ 281.184] (**) Option "Xinerama" "0"
[ 281.184] (==) Automatically adding devices
[ 281.184] (==) Automatically enabling devices
[ 281.184] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 281.184] Entry deleted from font path.
[ 281.184] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 281.184] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 281.184] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 281.184] (WW) Disabling Keyboard0
[ 281.184] (WW) Disabling Mouse0
[ 281.184] (II) Loader magic: 0x822e120
[ 281.184] (II) Module ABI versions:
[ 281.184] X.Org ANSI C Emulation: 0.4
[ 281.184] X.Org Video Driver: 10.0
[ 281.184] X.Org XInput driver : 12.2
[ 281.184] X.Org Server Extension : 5.0
[ 281.185] (--) PCI:*(0:1:0:0) 10de:0322:0000:0000 rev 161, Mem @ 0xfd000000/16777216, 0xe8000000/134217728, BIOS @ 0x????????/131072
[ 281.185] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 281.185] (II) LoadModule: "extmod"
[ 281.185] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 281.185] (II) Module extmod: vendor="X.Org Foundation"
[ 281.185] compiled for 1.10.0.902, module version = 1.0.0
[ 281.185] Module class: X.Org Server Extension
[ 281.185] ABI class: X.Org Server Extension, version 5.0
[ 281.185] (II) Loading extension MIT-SCREEN-SAVER
[ 281.185] (II) Loading extension XFree86-VidModeExtension
[ 281.185] (II) Loading extension XFree86-DGA
[ 281.185] (II) Loading extension DPMS
[ 281.185] (II) Loading extension XVideo
[ 281.185] (II) Loading extension XVideo-MotionCompensation
[ 281.185] (II) Loading extension X-Resource
[ 281.185] (II) LoadModule: "dbe"
[ 281.185] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 281.185] (II) Module dbe: vendor="X.Org Foundation"
[ 281.185] compiled for 1.10.0.902, module version = 1.0.0
[ 281.185] Module class: X.Org Server Extension
[ 281.185] ABI class: X.Org Server Extension, version 5.0
[ 281.185] (II) Loading extension DOUBLE-BUFFER
[ 281.185] (II) LoadModule: "glx"
[ 281.186] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 281.216] (II) Module glx: vendor="NVIDIA Corporation"
[ 281.217] compiled for 4.0.2, module version = 1.0.0
[ 281.217] Module class: X.Org Server Extension
[ 281.217] (II) NVIDIA GLX Module 173.14.28 Wed Sep 29 10:17:05 PDT 2010
[ 281.217] (II) Loading extension GLX
[ 281.217] (II) LoadModule: "record"
[ 281.217] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 281.217] (II) Module record: vendor="X.Org Foundation"
[ 281.217] compiled for 1.10.0.902, module version = 1.13.0
[ 281.217] Module class: X.Org Server Extension
[ 281.217] ABI class: X.Org Server Extension, version 5.0
[ 281.217] (II) Loading extension RECORD
[ 281.217] (II) LoadModule: "dri"
[ 281.217] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 281.217] (II) Module dri: vendor="X.Org Foundation"
[ 281.217] compiled for 1.10.0.902, module version = 1.0.0
[ 281.217] ABI class: X.Org Server Extension, version 5.0
[ 281.217] (II) Loading extension XFree86-DRI
[ 281.217] (II) LoadModule: "dri2"
[ 281.217] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 281.218] (II) Module dri2: vendor="X.Org Foundation"
[ 281.218] compiled for 1.10.0.902, module version = 1.2.0
[ 281.218] ABI class: X.Org Server Extension, version 5.0
[ 281.218] (II) Loading extension DRI2
[ 281.218] (II) LoadModule: "nvidia"
[ 281.218] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 281.218] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 281.218] compiled for 4.0.2, module version = 1.0.0
[ 281.218] Module class: X.Org Video Driver
[ 281.218] ================ WARNING WARNING WARNING WARNING ================
[ 281.219] This server has a video driver ABI version of 10.0 that is not
supported by this NVIDIA driver. Please check
http://www.nvidia.com/ for driver updates or downgrade to an X
server with a supported driver ABI.
[ 281.219] =================================================================
[ 281.219] (II) NVIDIA dlloader X Driver 173.14.28 Wed Sep 29 09:55:18 PDT 2010
[ 281.219] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 281.219] (--) using VT number 7
[ 281.222] (II) Loading sub module "fb"
[ 281.222] (II) LoadModule: "fb"
[ 281.222] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 281.222] (II) Module fb: vendor="X.Org Foundation"
[ 281.222] compiled for 1.10.0.902, module version = 1.0.0
[ 281.222] ABI class: X.Org ANSI C Emulation, version 0.4
[ 281.222] (II) Loading sub module "wfb"
[ 281.222] (II) LoadModule: "wfb"
[ 281.222] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 281.223] (II) Module wfb: vendor="X.Org Foundation"
[ 281.223] compiled for 1.10.0.902, module version = 1.0.0
[ 281.223] ABI class: X.Org ANSI C Emulation, version 0.4
[ 281.223] (II) Loading sub module "ramdac"
[ 281.223] (II) LoadModule: "ramdac"
[ 281.223] (II) Module "ramdac" already built-in
[ 281.223] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 281.226] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 281.226] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 281.226] (II) UnloadModule: "nvidia"
[ 281.226] (II) Unloading nvidia
[ 281.226] (II) UnloadModule: "wfb"
[ 281.226] (II) Unloading wfb
[ 281.226] (II) UnloadModule: "fb"
[ 281.226] (II) Unloading fb
[ 281.226] (EE) Screen(s) found, but none have a usable configuration.
[ 281.226]
Fatal server error:
[ 281.226] no screens found
[ 281.226]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 281.226] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 281.226]

bilgee0629 wrote:
Arjann wrote:
I think the new xorg-server is the problem as it isn't supported by this nvidia driver yet.
You could try to install the nouveau driver until nvidia comes with a new version of the 173 branch that supports xorg-server 1.10, see: https://wiki.archlinux.org/index.php/Nouveau for information. As lower-grade options, you might also consider xf86-video-nv and xf86-video-vesa.
Should i uninstall nvidia driver, then install it?
I think thats the easy way yes, else you have to blacklist the nvidia kernel module.. check the wiki link of nouveau for details.

Mac freezing and kernel panics

Please help if anyone can. I'm not much of a computer expert.
I apologize in advance if I'm not asking this question in the right forum or topic- I haven't ever posted before today.
I have a PowerMac G5 dual 2 GHz processor machine running 10.4.9. Lately I have had problems with freezing and kernel panics, especially at startup or soon after startup.
I have 1 GB RAM, 150 GB hard drive with 117 GB free space. I have no peripheral devices hooked to my computer- just an Apple USB mouse and keyboard that came with my computer.
Panics occur at startup usually, and require a restart using the power button.
Sometimes the system profiler shows that I have only 1 CPU.
I've run all the Apple hardware diagnostic stuff, Disk Utility, Disk Warrior, etc, and it comes up clean- no problems. I've run fsck -fy, and I've done a full erase and reinstall, then update to 10.4.9. Problem persists.
Sometimes I don't get the startup sound, and then everything freezes.
Sometimes it freezes on the blue screen and shows the prohibitory sign.
Sometimes when it freezes, the fans go wild and just keep increasing in speed until I force restart.
Recent kernel panic log reads as follows:
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000070000200 PC=0x000000000003FE3C
Latest crash info for cpu 0:
Exception state (sv=0x303BE280)
PC=0x0003FE3C; MSR=0x00009030; DAR=0x70000200; DSISR=0x00200000; LR=0x0003FE24; R1=0x17903470; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x020B9E40 0x0002BC34 0x002FE1CC 0x002FE3E4 0x002D64D4 0x002D5DD0
0x00502ED0 0x00500E00 0x004FFE98 0x0010916C 0x000D601C 0x000FE6C4 0x000DBF0C 0x000DC74C
0x0022D248 0x000FDEE0 0x002A5F94 0x00089D0C 0x00061340 0x00063258 0x000A84F0 0x000AB980
backtrace terminated - frame not mapped or invalid: 0xF0080DE0
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOStorageFamily(1.5)@0x4ee000
Proceeding back via exception chain:
Exception state (sv=0x303BE280)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x2FA43C80)
PC=0x00044398; MSR=0x4000F030; DAR=0x01597000; DSISR=0x40000000; LR=0x0001670C; R1=0xF0080DE0; XCP=0x00000010 (0x400 - Inst access)
Kernel version:
Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007; root:xnu-792.17.14~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000952D8 0x000957F0 0x00026898 0x000A8004 0x000AB980
Proceeding back via exception chain:
Exception state (sv=0x303BE280)
PC=0x0003FE3C; MSR=0x00009030; DAR=0x70000200; DSISR=0x00200000; LR=0x0003FE24; R1=0x17903470; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x020B9E40 0x0002BC34 0x002FE1CC 0x002FE3E4 0x002D64D4 0x002D5DD0
0x00502ED0 0x00500E00 0x004FFE98 0x0010916C 0x000D601C 0x000FE6C4 0x000DBF0C 0x000DC74C
0x0022D248 0x000FDEE0 0x002A5F94 0x00089D0C 0x00061340 0x00063258 0x000A84F0 0x000AB980
backtrace terminated - frame not mapped or invalid: 0xF0080DE0
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOStorageFamily(1.5)@0x4ee000
Exception state (sv=0x2FA43C80)
PC=0x00044398; MSR=0x4000F030; DAR=0x01597000; DSISR=0x40000000; LR=0x0001670C; R1=0xF0080DE0; XCP=0x00000010 (0x400 - Inst access)
Kernel version:
Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007; root:xnu-792.17.14~1/RELEASE_PPC
Model: PowerMac7,3, BootROM 5.1.8f7, 2 processors, PowerPC G5 (2.2), 2 GHz, 1 GB
Graphics: GeForce FX 5200, GeForce FX 5200, AGP, 64 MB
Memory Module: DIMM0/J11, 512 MB, DDR SDRAM, PC3200U-30330
Memory Module: DIMM1/J12, 512 MB, DDR SDRAM, PC3200U-30330
Modem: Jump, V.92, Version 1.0
Network Service: Built-in Ethernet, Ethernet, en0
Serial ATA Device: ST3160023AS, 149.05 GB
Parallel ATA Device: PIONEER DVD-RW DVR-107D
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Apple Optical USB Mouse, Logitech, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
USB Device: Hub, Up to 12 Mb/sec, 500 mA
USB Device: Studio Display, Up to 1.5 Mb/sec, 500 mA
I don't know enough to be able to interpret this.
Can anyone help.
Thank you very much.
PowerMac G5 Mac OS X (10.4.9)

Based on that info, it sounds like either the optical or hard drive is beginning to go bad and perhaps the CPU on the logicboard. The fact it mentions iostorage, that typically deals with the storage devices on the computer. The fact that the CPU disappears is not good. Backup your data and try to replace the hard drive. See my FAQ* on backing up:
http://www.macmaps.com/backup.html
A G5 takes SATA hard drives, and won't work with the Parallel ATA drives. SATA drives take the connectors shown here:
http://en.wikipedia.org/wiki/Serial_ATA
The drive may still be under warranty even if the computer is not. Look on the sticky label on the outside of the drive.
* Links to my pages may give me compensation.

Can i use "Oracle Database 12c: Performance Management and Tuning " training for getting certification on "Oracle Database 11g: Performance Tuning 1Z0-054"

i have taken "Oracle Database 12c: Performance Management and Tuning new" training from oracle university. Now i would like to get certified on "Oracle Database 11g: Performance Tuning 1Z0-054" exam. Is it possible ?

I essentially endorse and refer you to Matthews' and John's post above.
I would differ with slightly with Matthew because my guess is you would often be able to use like for like 12c training for an 11g certification ( I believe there are precedents). BEFORE ANYONE ASKS THE OTHER WAY DOESN'T HAPPEN.
.... but totally concur with Matthew you would ill advised to procede on that basis without one of:
- This being advertised as possible on the website : e.g. https://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=654&get_params=p_id:169 ... option 2 show courses.
- Confirmation from Brandye
- Confirmation from an Oracle Certification Support Web Ticket ( http://education.oracle.com/pls/eval-eddap-dcd/OU_SUPPORT_OCP.home?p_source=OCP )
... The more common (and in my opinion usually better) way would be get your 11g DBA OCP ( or higher first) and then take the 1z0-054. I am almost certain they will accept your 12c course for the 11g DBA OCP.
If you are choosing the route of not being a 11g (or 12c ) DBA OCP first but are on option 2 and relying on the course for certification then the issue is more in the balance and you are even more strongly advised to get confirmation before proceding (remember if the rules need to be changed for you only then any profit out of the exam is lost).
In general my understanding is Oracle would prefer to encourage people to train on the latest version of product that is available for training and will prefer to avoid restrictions which would cause you to train at a lower version. ( This is simply my guess at Oracle University Policy ... personal opinion only).
Having said all I have said I'd encourage you to go with the advice of the earlier two posts.

HT201457 I have a mid 2011 iMac and have installed windows 8.1 on it I costantly get system thread not handled and kernel security check failure and the Mac restarts

I Have a mid 2011 iMac with windows 8.1 on it and constantly get system thread exception not handled and kernel security check failur

I Have a mid 2011 iMac with windows 8.1 on it and constantly get system thread exception not handled and kernel security check failur

WARNING:Oracle process running out of OS kernel I/O resources (1)

Hi,
on my server, IBM power6, with oracle 10.2.0.4, dbwr trace report some errors like this:
*** 2010-08-31 06:26:46.574
Warning: lio_listio returned EAGAIN
Performance degradation may be seen.
WARNING:Oracle process running out of OS kernel I/O resources (1)
*** 2010-09-01 07:11:38.691
Warning: lio_listio returned EAGAIN
Performance degradation may be seen.
WARNING:Oracle process running out of OS kernel I/O resources (1)
The awr in this period of time reports:
Top 5 Timed Events Avg %Total
~~~~~~~~~~~~~~~~~~ wait Call
Event Waits Time (s) (ms) Time Wait Class
db file sequential read 509,435 2,610 5 42.3 User I/O
CPU time 1,714 27.8
log file sync 55,309 1,146 21 18.6 Commit
log file parallel write 60,498 937 15 15.2 System I/O
db file parallel write 27,166 295 11 4.8 System I/O
The workload was represented from a sqlldr with rows=100000.
Warning in trace file worry me.
Warning: lio_listio returned EAGAIN
depends on aioserver that is low, 10 instead 50, because we have 40disks*10/8 cpu.
Can anyone help me?

In note 443368.1:
" If you are using JFS/JFS2, then set the initial value to *10 times the number of logical disks divided by the number of CPUs*."
pstat -a | grep -c aios
161
lsattr -E -l aio0
autoconfig available STATE to be configured at system restart True
fastpath enable State of fast path True
kprocprio 39 Server PRIORITY True
maxreqs 4096 Maximum number of REQUESTS True
maxservers 10 MAXIMUM number of servers per cpu True
minservers 1 MINIMUM number of servers True
Edited by: Davy on 1-set-2010 3.04

Oracle EBS 12.1.3 and SOA 10g hardware sizing

Hi All,
To give you the background, we have integration requirements where in one of the interface about 20000 sales orders come in the system everyday and they have about 3-5 lines per sales order. Most of these orders come between 3-6 PM. We have 50 other interfaces along with this but this is a major one. Client is concerned about performance and so we have to give right design and right hardware sizing so that the system is able to handle all the load without causing performance issues. We are planing to use Oracle EBS 12.1.3 and SOA Suite 10.1.3.5 (10g)
Any processes, documentation on how to go about hardware sizing, tools will be helpful
Thanks,
Rahul

Any Updates??

Oracle 9.2.0.6 and kernel 7.0 ?

Similar Messages

Maybe you are looking for