Oracle 9.2.0.8 compatiblity with Planning 9.3.1.1.5

Is oracle 9.2.0.8 database version compatible with Hyperion products 9.3.1.x
we have essbase 9.3.1.3,shared services 9.3.1,planning 93115 . and right now we use oracle 9.2.0.6 and are going to migrate to 9.2.0.8
Is this new version compatible?
Thanks

This is the gospel as far as compatibility for 9.3.1 goes:
http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hsys9_install_start_here.pdf
This being said it doesn't specifically mention 9.2.0.6 or 9.2.0.8 being supported. I'd say your technically on a non-supported platform anyways I doubt it will change how it interacts on a minor "dot" release.
Someone may be on this version although a lot of people will be on 10g and 11g.
Regards,
John A. Booth
http://www.metavero.com

Similar Messages

Is oracle 9.2.0.8 compatible with Sun Cluster 3.3 5/11 and 3.3 3/13?

Is oracle 9.2.0.8 compatible with Sun Cluster 3.3 5/11 and 3.3 3/13?
Where can I check compatibility matrix?

matthew_morris wrote:
This forum is about Oracle professional certifications (i.e. "Oracle Database 12c Administrator Certified Professional"), not about certifying product compatibility.
I concur with Matthew. The release notes for sun cluster and oracle for solaris might tell you. oracle 9.2.0.8 is out of support on solaris and I recall needing a number of patches to get it to a fit state ... and that is without considering sun cluster. Extended support for 9.2.0.8 ended about 4 years ago ... this is not a combination I would currently be touching with a bargepole! You are best to seek on MOS.

Oracle 11g jars not being compatible with WAS 6.1.x versions

Hi,
We have an issue with Oracle 11g jars not being compatible with WAS 6.1.x versions.
If we use Oracle10g client jars then they are working with the 11g database.
Below are the findings
Working fine With Ojdbc14.jar
Not working With Ojdbc5.jar
WAS 6.0
Working fine With Ojdbc14.jar
Not working With Ojdbc5.jar
WAS 6.013
Working fine With Ojdbc14.jar
Not working With Ojdbc5.jar
As per IBM website link Oracle 11g should be working with WAS 6.1.0.21 upwards
Could somebody please help me regarding the same.
thanks & Regards,
Anoop

# Download the full Firefox installer from http://www.mozilla.com/
# Delete the Firefox [http://kb.mozillazine.org/Installation_directory installation directory], making sure all the Firefox files and folders are removed. The default location on 32 bit Windows is C:\Program Files\Mozilla Firefox\
# Re-install Firefox
Note that deleting the Firefox installation directory will not remove your bookmarks or other Firefox user data, they are stored elsewhere.

Is ORACLE DB 7.3.4 compatible with VPN systems?

Can any body write as needed detail where I can find the information about that (Is ORACLE DB 7.3.4 compatible with VPN systems?)
Thanks in advance I need the answer quick answer

VPN is virtual private networks. This means (baldly) running secure private applications using the Internet as the platform. This has nothing to do with databases.
Did you mean VPD (virtual private database)? If so, the answer to your question is "No". Oracle's implementation of VPD uses Row Level Security, which was only introduced into 8.1.7.
Cheers, APC

Can Oracle Fusion(JDE 8.12) compatible with JDE 8.11

Hi All,
Here we are facing some problem with Oracle Fusion Intelligence (JDE 8.12).
The client having JDE version 8.11 and we are having Oracle Fusion, which is meant for JDE 8.12. And client doesn't want to upgrade to 8.12 as it is expensive for them.
So can these both(Oracle Fusion-JDE 8.12 and JDE 8.11) compatible with each other?
Appreciated the early response.
Thanks in Advance
Rami

See E1 Doc 754249.1 for the workaround, an easier way to do this is already planned for a future release. Also keep in mind that currently the xmlp kernel looks at the default environment from the security stanza in the jde.ini so that if you are submitting from PY and the default environment is set to PD you will need to change the PD data dictionary items as well.
Pedro

Essbase 9316 and EAS 9315 compatible with planning 931?

Hi there, does anyone knows if Planning 931 is compatible with Essbase 9316 and EAS 9315 ?
There seems to some changes with essbase.sec

John, you are the best. Are you sure you won't reconsider coming to ODTUG Kaleidoscope? I think there's a line of people waiting to buy you rounds. I am first in that line if you can stand my company. :)
So this is awesome, huge, marvellous, blah, blah, blah. No more assigning Server Access - no biggie. No more refreshes between Essbase and Shared Services - that's a big one.
Detlev, now I understand your trepidation regarding Planning -- what happens on refresh. Does Planning want to see a username in Essbase.sec or not? I am guessing yes but there's only one way to test it.
Per the docs, if PERSISTUSERATLOGIN is not used, there's no way in Essbase.log or app logs to track named connections. I wonder how (and maybe there is no way) this stuff will be analyzed in future.
Considering it's such a big change, it would sort of be nice if it was a little more fanfare than something buried deep in a readme of the non-current release of the product.
Perhaps it is coming with the next patch to 11.1.1.3 or maybe 11.2.
Regards,
Cameron Lackpour

Is Oracle 7.3.2 server compatible with later client release?

Hi,
We have an Data into an Oracle 7.3.2 server. A new application will be added that require an Oracle8 or greater client tool.
I searched and couldn't find any kind of server/client interoperability matrix. Can you please inform me what client version is compatible with that server version or which one is best suited? Can we use 8i, 9i, 10g, 11g?
Regards,
Alex
Edited by: 952791 on Aug 14, 2012 1:51 PM

>
I searched and couldn't find any kind of server/client interoperability matrix
>
The 8i docs have a matrix so you should check this doc first
http://docs.oracle.com/cd/F49540_01/DOC/network.815/a67440/ch5.htm#445354
Vincent Rogier provide this information in a thread last year but didn't give the source
Database Version not supported, Oracle 8 access from Windows 64 bit
>
A Oracle 11g client cannot connect to an Oracle 8i server. It clearly stated in the Oracle version compatibility matrix.
8i client can connect to any server from 7.3.4 to 11g
9iR1 client can connect to any server from 7.3.4 to 11g
9iR2 client can connect to any server from 8.1.7 to 11g
10g client can connect to any server from 8.1.7 to 11g (with some sub version not supported)
11g client can connect to any server from 9iR2 to 11g

Re: Is Oracle 11gR2 and 10gR2 BOTH compatible with Oracle Linux 6 Update 1?

Hello,
Required to Install Oracle 11gR2 and 10gR2 Oracle binaries on Oracle Linux 6 Update 1, are both versions compatible to install and run with databases on Oracle Linux Release 6 Update 1 or Oracle Linux Release 5 Update 7 is required for this?
Thanks in advance,
Regards,
A
Edited by: 850391 on Oct 13, 2011 3:43 PM
Edited by: 850391 on Oct 13, 2011 3:44 PM
Edited by: 850391 on Oct 13, 2011 3:44 PM

Hi;
Oracle 11g or 10g is not certified wiht OEL or RHEH6 yet. Please use OEL 5.x version which you can download from edelivery.
Also see:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Regard
Helios

Is iPhone "Oracle Buisness Approvals for Managers'' compatible with EBS-11i

Is it possible to Install "Oracle Buisness Approvals for Managers'' (BPEL connector for iPhone with EBS) on EBS-11i? the following PDF askes EBS-R12
http://www.oracle.com/applications/oracle-business-approvals-for-managers-faq.pdf
Our EBS version is 11.5.10.2
Thanks.

Thank you Helios. We are also exploring PO/PR approvals through Blackberry utilizing EBS-11i Notification Alerts. I have three questions
1. Whats difference between oracle Notification/Email Alerts AND Oracle Workflow Notification Alerts.
2. Is EBS-11i sufficient to exploit its email sender to receive aswell and work with NID embedded in email
3. Why do we need Application Server Wireless component!?! if we can receive normal emails with NID tag embedded through non wireless App server 10g setup. Our blackberries since receiving normal email fine can/may also receive NID tagged emails in same traditional manner.
Please guide.
Thank you
Edited by: user473160 on Nov 11, 2009 1:29 PM

Is Oracle Weblogic server 10.3 compatible with jdk 1.5.0?

When i point 1.5.0 JDK version to Oracle Weblogic server 10.3 "Bad version number in .class file" error is thrown while starting the server.
can any one help me to resolve this issue?
Edited by: user10643892 on Nov 23, 2008 10:40 PM

Hi, there.
You are right. The overview page has no clear statement on JDK. However, if you look into the supported operating system links, you'll find only JDK 6 is supported. Example for Solaris:
http://edocs.bea.com/platform/suppconfigs/configs/solaris/solaris10_103.html
Note that there is support for JDK 5 clients, which may be useful to you:
http://e-docs.bea.com/wls/docs103/notes/new.html#wp1090981
I hope this answers your question.
Cheers,
-Adrian

Is Oracle 8i compatible with win2000 ?

Hi Friends,
I got a problem with the oracle 8i standard version(8.1.6) and personal oracle8i in WINDOS2000 environment ( both are on separate p.c.).
I had installed perfectly and works for few days, then after some days my database couldnot startup. When i tried to login to database end-of-communication message display.
Is this oracle 8i versions is fully compatible with windows 2000 environment ?
Please guide, i'm in big trouble....

Yes Oracle 8i is compatible with Windows 2000. Please install the Oracle 8i edition for Windows NT on the Windows 2000 machine. It works very well. Also check for installation problems. Check the listener settings as well

Oracle 8i compatible with win2000 ?

Hi Friends,
I got a problem with the oracle 8i standard version(8.1.6) and personal oracle8i in WINDOS2000 environment ( both are on separate p.c.).
I had installed perfectly and works for few days, then after some days my database couldnot startup. When i tried to login to database end-of-communication message display.
Is this oracle 8i versions is fully compatible with windows 2000 environment ?
Please guide, i'm in big trouble....Is

I'm guessing you have a PIV machine? Any platform that uses the Intel PIV processor, with the sun JRE and Symmantec JIT, OUI version 1.7.1.9.0 and earlier, will encounter this problem.
Windows NT, Windows 2000 and NetWare platforms are confirmed to be affected.
You can either search for Patch # 1507768 on the Metalink site or you can copy the contents of the installation CD to your hard disk and rename all occurences of the file symcjit.dll to symcjit.ora. Then you should be able to go to that directory on your hard drive and run setup just fine.

Is Oracle database Compatible with Times Ten database?

Hello All,
I need to use a temporary database in Oracle for some months.
Later on, I will need to migrate all data to a Times Ten database.
1. My doubt is if Oracle and Times Ten databases are compatible with
each other (specially when having this kind of cases) ?
2. In case the answer is YES to question 1, I would like to know if there are some
restrictions in that compatibility (type of data, any other issue, etc)
Best Regards
Rubén

Ruben,
There are two areas you shoul look into regarding your project: SQL functionality and data types. TimesTen 6.0 supports a subset of the SQL features and data types currently available in the Oracle DB; also, TimesTen supports some native numberic data types that are not available in the Oracle DB.
If your end-game is to use the TimesTen database, then I would start with the TimesTen API and SQL Reference Guide (http://www.oracle.com/technology/documentation/timesten_doc.html)
Use the SQL functionality documented for TimesTen and pay attention to the common data types. For example, VARCHAR is handled differently from VARCHAR2 (where trailing spaces exist), DATE and Timestamp are handled differently, etc. Additionally, keep in mind most numeric values are declared using NUMBER in the Oracle DB, but not in TimesTen.
If you are an existing TimesTen licensed customer, please let us know your support ID(CSI) and we can contact you with more information on our future release plan to address SQL and data types compatibility.
By the way, what's the timeline for your project?
-scheung

Which version of Weblogic on Solaris is compatible with Oracle 8.1.7 - Unicode?

Hi folks,
We want upgrade WLS 4.5.1 to one of the last version of WLS, but also we are
planing upgrade Oracle to 8.1.7 version and migrate the character set of the
database to UTF8 (Unicode),
so we need to know which versions of WLS are compatible with Oracle 8.1.7
and Unicode as Character Set.
Thanks in advance.
Moises Moreno.

Hi Moises Moreno
The latest version of weblogic server is 6.1 with service pack 1. This version
supports oracle 8.1.7 on major unix platforms viz., solaris(2.6,2.7,2.8),
hp-unix(11.0,11.0i), linux7.1, Aix4.3.3 and on windows platforms viz.,
NTwithsp5, 2000.
BEA jdrivers are having Multibyte character set support (UTF8).
Note : Weblogic server 5.1 with SP10 also supports oracle 8.1.7.
FMI : http://www.weblogic.com/platforms/index.html#jdbc
Thanks & Regards
BEA Customer Support
Moises Moreno wrote:
Hi folks,
We want upgrade WLS 4.5.1 to one of the last version of WLS, but also we are
planing upgrade Oracle to 8.1.7 version and migrate the character set of the
database to UTF8 (Unicode),
so we need to know which versions of WLS are compatible with Oracle 8.1.7
and Unicode as Character Set.
Thanks in advance.
Moises Moreno.

Error :"The provider is not compatible with the version of Oracle client"

Hi guys!
I'm facing this problem:
When my .Net application tries to access the DB, I get this error message above.
The application is into the same machine of DB and the operational system is Windows Server Enterprise 64 bits.
I'm comparing to another machine that has the same scenario but runs in Windows Vista 64 bits. This problem doesn't happen and I can normally access the DB.
The both database versions are 10g Release 2 (10.2) and all components from Oracle Database Components 10.2.0.2.21 are installed as the containing bellow:
-Oracle Data Provider for .NET 1.x 10.2.0.2.20
-Oracle Data Provider for .NET 2.0 10.2.0.2.20
-Oracle Developer Tools for Visual Studio .NET 2003 10.2.0.2.20
-Oracle Developer Tools for Visual Studio 2005 10.2.0.2.20
-Oracle Provider for OLE DB 10.2.0.2.20
-Oracle Objects for OLE 10.2.0.2.20
-Oracle Services For Microsoft Transaction Server 10.2.0.1.0
-Oracle Net 10.2.0.1.0
-Oracle Universal Installer 10.2.0.2.0
Oracle.DataAcces.DLL is 2.102.2.20 and it is reference in my .Net app (that is published and located into IIS).
These are the Oracle assemblies installes in 'C:\Windows\Assembly':
Windows Vista Machine:
ASSEMBLY NAME VERSION CULTURE PUBLIC KEY TOKEN PROCESS ARCHITECTURE
Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 pt-BR 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 it 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 fr 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 es 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 de 89b483f429c47342
Oracle.Management.Omo 2.102.2.20 Neutral 89b483f429c47342 x86
Oracle.VsDevTools 2.102.2.20 Neutral 89b483f429c47342 x86
Policy.10.1.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Policy.10.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Windows Server Machine:
ASSEMBLY NAME VERSION CULTURE PUBLIC KEY TOKEN PROCESS ARCHITECTURE
Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Oracle.DataAccess 2.102.2.20 Neutral 89b483f429c47342 x86
Oracle.DataAccess.resources 10.2.0.100 pt-BR 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 zh-CHT 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 zh-CHS 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 ko 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 jp 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 it 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 fr 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 es 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 de 89b483f429c47342
Policy.10.1.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Policy.10.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Policy.9.2.Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
Policy.9.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
What should I check and do to solve this problems?
Thanks for help,
Anderson

Hi,
Often the error "The provider is not compatible with the version of Oracle client" is raised when the unmanaged dll OraOpsX.dll can't be found, can't be loaded, or is the wrong version. For version 10.2.0.x of ODP.NET and .NET Framework 2.x the file should be called "OraOps10w.dll" and should be found in the %ORACLE_HOME%\bin directory.
Since the ODAC pieces are installed on the same host as the database, are they in a separate Oracle Home or the same Oracle Home as the database software? If there are multiple Oracle Home directories, which one is in the system path first?
I would start with verifying the version of OraOps10w.dll and the system path on the server. You might also confirm that the Oracle Home directory (and everything under it) has the following permissions for Authenticated Users:
- Read & Execute
- List folder contents
- Read
Regards,
Mark

Oracle 9.2.0.8 compatiblity with Planning 9.3.1.1.5

Similar Messages

Maybe you are looking for