Oracle 9.2 installation on AIX-unix version 5.2

Hi,
I need to install oracle 9.2 on AIX server whose OS is version 5.2 and hardware is IBM P-Series P615 . Will there be any problem in doing this activity or successfully it can be installed ?

Hi;
Why oracle 9i? If possible use supported version like 11gR2. If you have to install oracle 9iR2, yes you can make installation on 5.1, 5.2, 5.3 (5L)(64bit only)
For details please see:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Regard
Helios

Similar Messages

Oracle DB 9201 installation on AIX 5L with 32 bit architecture!!

Hi,
I have installed AIX 5L on 32 bit kernel machine.
Thereafter I have installed Oracle 9.2.0.1 Database!!
But whenever I am running sqlplus or listener it gives me an error that "you cannot run 64 bit application on 32 bit machine"
but I am able to run DBCA or NETCA command from oracle home directory & it runs properly. It also create & configure the listener but due to the above mismatch it could not start!!
Can any one help !!
Regards,
Indraneel

Same thread into Installation Forum : Re: Oracle DB 9201 installation on AIX 5L with 32 bit architecture!!
Nicolas.

Oracle db 10gR2 installation on AIX 5 series server

can anyone please suggest me a gud link to get detailed steps for installing oracle database 10g R2 on AIX server as I am completely new to AIX.
I have done db admin and maintainence on Solaris and Linux, though.
Please also suggest gud installation guide for Oracle Application server 10g R2 forms and services only.
thanks in advance!

http://download.oracle.com/docs/cd/B19306_01/install.102/b28055/toc.htm
www.oracle-base.com for oralce Apps installations...

Oracle 8.i Installation - FOR AIX 5 -

Is Oracle 8i supported on AIX 5 (I know it is supported on AIX 4.3.3), but the install scripts do not seem to be coded for AIX5.
Thanks
Kevin Shaw
dba e-result plc

Oracle's policy seems to be 'remove the download when the product becomes obsolete and unsupported'.
Oracle8i has been unsupported for some time now. If you are lucky, a conversation with your Sales Rep and with Oracle Support might provide the software.
<off>
But I must admit confusion - why upgrade pieces and expect the non-upgraded pieces to continue working without difficulty? Your mix-and-match approach is a recipie for long-term problem resolution opportunities
</off>

How to access SQL server in oracle running in aix unix?

Hi all,
I have oracle database running in IBM AIX OS, and I need to query data in
SQL SERVER 2000.
How to do that?
Is there free Sqlserver ODBC drivers for unix?
Thanks

Hi,
I prefer heterogenous services over ODBC for this!
I have my notes here, which may help.
http://www.dba-oracle.com/t_heterogeneous_database_connections_sql_server.htm
1. Install Oracle ODBC drivers on the server (your local Oracle database) that will access the remote SQL Server database using the database link.
2. Setup the ODBC connection on the local Oracle database using the Windows ODBC Data Source Administrator
3. Test the ODBC drivers to ensure that connectivity is made to the SQL Server database.
4. Ensure that your global_names parameter is set to False.
5. Configure the Oracle Heterogeneous services by creating an initodbc.ora file within the Oracle database.
7. Modify the Listener.ora file.
SID_NAME is the DSN for the remote database.
ORACLE_HOME is the actual Oracle home file path.
PROGRAM tells Oracle to use heterogeneous services.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME=Cas30C) -- Enter the DSN on this line
(ORACLE_HOME = c:\oracle10gdb) -- Enter your Oracle home on this line
(PROGRAM = hsodbc) ) )
8. Modify the Tnsnames.ora file. This is the Oracle database installation accessed by the users to connect to the ODBC drivers
(DESCRIPTION=
(ADDRESS_LIST=
(Address=(PROTOCOL=TCP)
(HOST=
-- (Server x)
(PORT=1521))) -- Enter the port on which the server x Oracle installation
-- is listening
(CONNECT_DATA=(SID=Cas30c)) - Enter the DSN name
(HS=OK) -- Enter this value. It tells Oracle to use hetergeneous services
9. Reload the listener on local Oracle database
10. Create a database link on the local Oracle installation that accesses the heterogeneous connection, which, in turn, connect to SQL Server.
11. Run a SQL Server Select statement from the Oracle installation using the database link.
Hope this helps. . .
Don Burleson
Oracle Press author
Author of “Oracle Tuning: The Definitive Reference”
http://www.dba-oracle.com/bp/s_oracle_tuning_book.htm

Xlc file Required for Oracle Product Installation on AIX 6.1

Hi All,
I am trying to install Oracle 11g Forms & Reports on AIX 6.1 [TL12].
I have installed JDK and Weblogic Server without any Errors.
When we reach 93% on software Alone installation with 11g Forms & Reports, we got some error
ERROR IN INVOKING TARGET 'RELINK' OF MAKEFILE '///INS_PRECOMP.mk'We raised a SR for this Error, Oracle Support given one solution to follow.
>
Yes, there is a known issue with AIX OS.
Before starting the Oracle Fusion Middleware 11g Classic installation on IBM AIX, check for "xlc" availability on the system. It should be present either under /usr/bin/ or under >/usr/vac/bin directory.
If /usr/vac/bin/xlc is present, create the following symlink as root user:
# ln -s /usr/vac/bin/xlc /usr/local/bin/xlc
If /usr/bin/xlc is present, create the following symlink as root user:
# ln -s /usr/bin/xlc /usr/local/bin/xlc
Please clean up the failed install and start new install once you follow the above steps and let me know the results.But Unfortunately in our AIX 6.1 Box we dont have any 'XLC', in any of the folder in entire file system.
What is this XLC ?? if that is not available how to create the SYMLINK ?
Kindly Some one Advice me.
Regards,
Paja

Hi Paja,
I would recommend you o post this thread under application server/weblogic forum.
Arik

Oracle 11g R2 RAC installation on AIX

hi,
I wana setup Oracle 11g R2 RAC on Ibm with AIX. Is there any good document or cookbook explaining step by step procedure for the installation...I'll be thankful
thanx

Hi;
Please check below links which is mention about 11gR2 Rac installation on AIX
11gR2 RAC installation in AIX help urgent
Re: 11gR2 RAC installation in AIX help urgent...!!!!
11gR2 RAC Installation Manual (with ASM+Rawdevice)
http://www.goodus.com/knowledge_pds/%EA%B8%B0%EC%88%A0%EB%85%B8%ED%8A%B8_11gR2_RAC_Guide.pdf
Regard
Helios

Oracle 10g R2 installation on sun solaris 10 Sparc machine

Hi there,
I encountered the following problem during oracle 10g R2 installation on sun solaris 10 Sparc machine
Error encountered:
Using paramFile: /u01/Oracle/10gr2_db_sol/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking Temp space: must be greater than 250 MB. Actual 2266 MB Passed
Checking swap space: must be greater than 500 MB. Actual 2335 MB Passed
Checking monitor: must be configured to display at least 256 colors Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n]
The following were the steps taken before encountering the above error
1. logged into a workstation
2. From its xterm terminal I logged to the oracle server via ssh oracle@ip
3. keyed in the following at the command prompt
DISPLAY=machine_name:0.0; export DISPLAY
4. executed the following from the command prompt
./runInstaller
Note: when executing the ./runInstaller, the preinstallation checking just hangs at Checking monitor: must be configured to display at least 256 colors. But the log file shows it failed during preinstallation checking as shown in Error encountered
Please help me with this problem.
Thank you
Ravindran Kanniah

It is because of UNIX shell. I also faced this error during installation.
First check your shell by the following command.
$ echo $SHELL
Then select the below.
For csh shell
$ setenv DISPLAY 192.168.1.128:0.0
$ export DISPLAY
For sh,ksh and bash
$ DISPLAY=192.168.1.128:0.0
$ export DISPLAY
After you do this check the value of DISPLAY variable.
$ echo $DISPLAY
If the DISPLAY variable is set then run ./runInstaller.
One advice: Keep a complete log of your terminal session. This will help you in future :)
-aijaz

Oracle RAC 11g R2 on AIX

Hello All,
I am new to RAC installations. I want to install Oracle RAC 11g R2 on an AIX server.
Please can you provide me a link with the detailed and easy steps to follow and install Oracle 11g R2 on AIX.
i am cheking the Oracle Installation guide, but it is not easy and it does not include the detailed steps; for ex what to add to the hosts file..
any more simple guide/link ?
Regards,

Hi,
I am new to RAC installations. I want to install Oracle RAC 11g R2 on an AIX server.
Please can you provide me a link with the detailed and easy steps to follow and install Oracle 11g R2 on AIX.
i am cheking the Oracle Installation guide, but it is not easy and it does not include the detailed steps; for ex what to add to the hosts file..
any more simple guide/link ?Pl Refer MOS tech notes:
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (AIX) [ID 811293.1]*
*Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]*
*Master Note for Automatic Storage Management (ASM) [ID 1187723.1]*
*Can We Install 10gr2/11gr2 on AIX 64-bit OS When Running in 32bit Kernel Mode [ID 956449.1]*
*Master Note for Real Application Clusters (RAC) Oracle Clusterware and Oracle Grid Infrastructure [ID 1096952.1]*
Also refer:
http://download.oracle.com/docs/cd/E11882_01/rac.112/e16795/toc.htm
http://download.oracle.com/docs/cd/E11882_01/install.112/e17214/toc.htm
http://www-03.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/WP101176
Re: 11gR2 RAC installation in AIX help urgent...!!!!
Hope helps :)
thanks,
X A H E E R

Oracle 9i R2 on IBM AIX 5L v5.3

hello...
I need all the steps to install Oracle 9i Release 2 on AIX 5L v5.3
there is a problem with Java package.
thanks a lot
Esmelin.

Here are all the steps Installation Guide for UNIX Systems.

Oracle db / schema installation for BO

Dear Experts,
I am going to do the BO Setup in our landscape,
Can any one suggest me how to do the following....
1. How to do the Oracle installation for BO in AIX (UNIX)? Is it a normal installation? or different?
BOE is on Windows.
2. How to do the sizing of database?
3. How to create a database schema in oracle with proper parameters?
4. What are the parameters we have to maintain in Oracle - init.ora file which is required for BO ?

Dear
Please check the installation guides on SAP service marketplace
[http://service.sap.com/installationguides]
There are some specific points that depend on which BO you will install but those are mentioned in the installation guide for BO per database (Oracle, MySQL and so on).
For Oracle you have to perform a database installation as mentioned in the installation guide for Oracle on SAP service marketplace.
The general parameter recommendations for Oracle (SAP note) will also be valid for BO I assume as it's Oracle release dependant and not SAP Software dependant, only point is whether or not its OLTP or OLAP that is used.
Kind regards
Tom

Java.lang.UnsatisfiedLinkError: /u01/app/oracle/mw_ofrdev01/Oracle_FRHome1/oui/lib/aix/liboraInstaller.so

we are using 64bit IBM AIX machine with 7.1 os with java 64 bit version,
while applying a patch on oracle forms and reports 11gR2, we come across of a error that opatch will not work with 64bit java, so we found this doc 1512163.1 and followed the same,
but now while executing the below commands,
./opatch -lsniventory
and ./opatch apply, we are gettting the below error,
java.lang.UnsatisfiedLinkError: /u01/app/oracle/mw_ofrdev01/Oracle_FRHome1/oui/lib/aix/liboraInstaller.so ( 0509-022 Cannot load module /u01/app/oracle/mw_ofrdev01/Oracle_FRHome1/oui/lib/aix/liboraInstaller.so.
0509-026 System error: Cannot run a file that does not have a valid format.)
at java.lang.ClassLoader.loadLibraryWithPath(ClassLoader.java:1005)
at java.lang.System.load(System.java:485)
at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.loadNativeLib(OiipuUnixOps.java:402)
at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.<clinit>(OiipuUnixOps.java:125)
at java.lang.J9VMInternals.initializeImpl(Native Method)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:196)
at oracle.sysman.oii.oiip.oiipg.OiipgEnvironment.ssgetUidux(OiipgEnvironment.java:528)
at oracle.sysman.oii.oiix.OiixEnvironmentOps.ssgetUidux(OiixEnvironmentOps.java:159)
at oracle.opatch.OUIReplacer.isRootAccess(OUIReplacer.java:832)
at oracle.opatch.OPatch.main(OPatch.java:518)
Exception in thread "main" java.lang.UnsatisfiedLinkError: oraInstaller (Not found in java.library.path)
at java.lang.ClassLoader.loadLibraryWithPath(ClassLoader.java:1005)
at java.lang.ClassLoader.loadLibraryWithClassLoader(ClassLoader.java:969)
at java.lang.System.loadLibrary(System.java:497)
at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.loadNativeLib(OiipuUnixOps.java:420)
at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.<clinit>(OiipuUnixOps.java:125)
at java.lang.J9VMInternals.initializeI

can someone give your inputs here to resolve the issue?

Oracle RAC support NFS in AIX

May I ask a question...
My environment: SAP run on the AIX. may I use the Oracle RAC by NFS in AIX for Oracle HA ...?

Hi Dennie,
As far as I read from the development update SAP on Oracle, SAP supports NAS NSF with RAC 11.2 on all Unix platforms. Check the link http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d053aa41-75b6-2d10-95b5-9a961a5ae750?quicklink=ora&overridelayout=true
Check the statement in the note "1416773 - Oracle Direct NFS", below;
Advantages of Oracle Direct NFS :
Since NFS is a shared file system, you can also use this
implementation for Real Application Clusters (RACs). Oracle Direct NFS
recognizes if an instance is part of an RAC installation.
Best regards,
Orkun Gedik

Solution Manager Install on Windows/MSSQL-Dev/QA/Production R/3 on AIX-UNIX

Hello,
We are about to install Solution Manager Install on Windows/MSSQL. Our current R/3 4.7 Enterprise environments (Dev/QA/Production) are installed on AIX-UNIX servers running Oracle 9i.
Is installing Solution Manager on a windows environment compatible with our R/3 servers in relationship to our transportation management system existing in a UNIX environment? i.e. can Solution Manager on windows control transports across our UNIX landscape?
If so, could someone point me in the direction of documentation/notes on this?
Thanks,
Laurie

You will have to load the Unicode kernel and here is the link to OSS where you can get get the download of SOLMAN for AS/400
https://websmp110.sap-ag.de/solutionmanager , then choose this one: ZIP 51033506_7 NW 7.0 SR3 UC-Kernel 7.00 OS/400 Info 550479 24.04.2008 .
The install manuals are out there as well.

Oracle R Enterprise installation ERROR: cannot copy dll file

This is bit strange, I posted this message in 2 forums but surprisingly can't find it anymore!! Anyways, I would appreciate if anyone can help me a bit on this issue:
I am having trouble installing ORE 1.3 on my windows 7 (home premium, personal notebook) 64 bit. I strictly followed the installation note and made sure all the path variables are defined properly. My R version is 2.15.1. My Windows user is a member of ora_dba group as can be seen below.
C:\Users\sourabh>net localgroup ora_dba
Alias name        ora_dba
Comment         Oracle DBA Group
Members
NT AUTHORITY\SYSTEM
sourabh
The command completed successfully.Now when I try to install.bat (bare with me as I try to include the whole path as I believe there may be the problem. Note that my oracle and R installation is in H:\ drive, not in C:\. Can that be an issue about some windows permission? I off-course tried many ways, gave the user full permission, but no luck.)
C:Users\sourabh>H:\ORACLE\OracleREnterprise\ORE\ore-server-win-x86_64-1.3\server\install.bat
Oracle R Enterprise 1.3 Server Installation.
Copyright (c) 2013, Oracle and/or its affiliates. All rights reserved.
Checking R ...................................
Pass
Checking R libraries ........................
Pass
Checking ORACLE_HOME ...............
Pass
Checking ORACLE_SID ..................
Pass
Checking sqlplus ...........................
Pass
Checking ORE ..............................
Pass
Current configuration
R_HOME            = H:\ORACLE\OracleREnterprise\R\R-2.15.1
R_LIBS_USER     = H:\ORACLE\Oracle11g\product\11.2.0\dbhome\R\library
ORACLE_HOME = H:\ORACLE\Oracle11g\product\11.2.0\dbhome
ORACLE_SID      = SINHA
Do you wish to install ORE? [yes]
Choosomg RQSIS tablespace
PERMANENT tablespace to use for RQSYS [SYSAUX]:
Using default SYSAUX
TEMPORARY tablespace to use for RQSYS [TEMP]:
Using default TEMP
Tablespace summary
PERMANENT tablespace = SYSAUX
TEMPORARY tablespace = TEMP
Installing libraries ..............
Fail
ERROR: cannot copy "rqe.dll" to "H:\ORACLE\Oracle11g\product\11.2.0\dbhome\bin"
C:Users\sourabh>Now here is the default group/user and permissions structures for C:\ and H:\ installation directories on my computer:
C:\program files :
        Group or user names                                    Permissions
        CREATOR OWNER                                          Special Permissions
        SYSTEM                                                 FULL control
        Administrators (Win7\administrators)                   FULL control
        Users (Win7\Users)                                     Read & execute, List folder contents, Read
        TrustedInstaller                                       List folder contents, Special Permissions
H:\%ORACLE_HOME% :
        Group or user names                                    Permissions
        Authenticated Users                                    Special Permissions
        SYSTEM                                                 FULL control
        Administrators (Win7\administrators)                   FULL control                Now noticed that there is no user called sourabh (Win7\Users) or Users (Win7\Users) on H:\, so I created and gave them "Full control" permission before running install script, but still no luck.... Any help please?
Thanks,
Sourabh

Hi all,
I have finally solved the problem, it seems somehow on my windows home premium I can't run the install script (on H:\ ) from the command line. I manually ran the batch script by double clicking on it, it ran fine and I was finally able to install ORE (server + supported + client) on my laptop. Now the connection -- followed through the manual, created user and granted all the roles. Now that I want to test the connection, I open R console and below are the input and output error message though it seems I can connect to the database:
R>
R> library(ORE)
Loading required package: OREbase
Attaching package: ‘OREbase’
The following object(s) are masked from ‘package:base’:
    cbind, data.frame, eval, interaction, order, paste, pmax, pmin, rbind, table
Loading required package: OREstats
Loading required package: MASS
Loading required package: OREgraphics
Loading required package: OREeda
Loading required package: OREdm
Loading required package: lattice
Loading required package: OREpredict
Loading required package: ORExml
R>
R>
R>
R> ore.connect(user = 'scott', sid = 'sinha', host = 'win7', password = 'tiger', port = 1521, all = T)
Error in .oci.GetQuery(conn, statement, data = data, prefetch = prefetch, :
ORA-06520: PL/SQL: Error loading external library
ORA-06522: Unable to load DLL
ORA-06512: at "RQSYS.RQEVALIMPL", line 17
ORA-06512: at "RQSYS.RQEVALIMPL", line 14
ORA-06512: at line 4
R>
R>
R> ore.is.connected()
[1] TRUE
R> I get the exact same error when I try to use even the ORE user "rquser". Any suggestion how to resolve this error?
Thanks,
Sourabh

Oracle 9.2 installation on AIX-unix version 5.2

Similar Messages

Maybe you are looking for