Oracle 9.2 RAC installation error on raw devices

During Oracle 9.2 RAC installation on Linux Red Hat 7.3 on raw devices
Database Configuration Assistant
returned the error message:
"Raw device validation check for Data File
"/dev/raw/clustdb_raw_cwmlite_100m" failed, No such file or directory".
Really this file exists, this is a link to a raw device.OK, so you are saying that /dev/raw/clustdb_raw_cwmlite_100m is link to /dev/raw/raw<x> (x some number)??
If not - there is your error.
How does Oracle validate the raw file?File MUST exists (or link) AND it must be a RAW device.
You can check it by raw -qa (it should display all raw devices, with theirs major-minor pairs)
What does this error mean?
Igor. Hrvoje

Similar Messages

Oracle single instance rac installation

hi,
do I need minimum of 2 servers in order to carry out 11.2 oracle single instance RAC installation ? or that its possible with one node? and then can add more nodes in future?
is there any article/documents on this?
thanks

http://download.oracle.com/docs/cd/E11882_01/rac.112/e10718/clonerac.htm#CHDGFHCA
"The cloning process assumes that you successfully installed an Oracle Clusterware home and an Oracle home with Oracle RAC on at least one node. In addition, all root scripts must have run successfully on the node from which you are extending your cluster database."
also
http://download.oracle.com/docs/cd/E11882_01/rac.112/e10717/intro.htm#BEIHEJGD
"Overview of Cloning and Extending Oracle Clusterware in Grid Environments
Cloning nodes is the preferred method of creating new clusters. The cloning process copies Oracle Clusterware software images to other nodes that have similar hardware and software. Use cloning to quickly create several clusters of the same configuration. Before using cloning, you must install an Oracle Clusterware home successfully on at least one node using the instructions in your platform-specific Oracle Clusterware installation guide.
For new installations, or if you must install on only one cluster, Oracle recommends that you use the automated and interactive installation methods, such as Oracle Universal Installer or the Provisioning Pack feature of Oracle Enterprise Manager. These methods perform installation checks to ensure a successful installation. To add or delete Oracle Clusterware from nodes in the cluster, use the addNode.sh and rootcrs.pl scripts."
it doesnt directly say its possible and I cant find full documentation on how to go about it ... but seem like its possible ?
Edited by: user9198889 on Feb 24, 2010 5:01 PM

Oracle BI Publisher Desktop Installation Error

Here is the answer from MOS to the thread Oracle BI Publisher Desktop Installation Error...
-- Symptoms
When attempting to install BI Publisher Desktop 11g (11.1.1.6.0) for 32-bit Office on Windows 7 64-bit. During the installation process, the following error message displays and the installation fails:
Please make sure JRE version 1.6 or later is installed
Java JRE 6 update 32 is installed on this PC; no other Java versions are installed.
-- Cause
Bug 14091878: ERROR WITH BIPUBLISHERDESKTOP32.EXE INSTALLATION
BIP Desktop installer might be corrupt
-- Solution
Complete the following steps:
    Download the offline installer for Java from this page:
    http://www.java.com/en/download/manual.jsp
    Make sure to download both Windows Offline (32-bit) and Windows Offline (64-bit).
    In Windows, go to the Control Panel --> Programs and Features.
    From the list of installed programs, uninstall all Java / JDK programs from your PC (both 32-bit and 64-bit)
    Reboot the PC
    Install the Java Windows Offline (32-bit)
    Install the Java Windows Offline (64-bit)
    Reboot the PC
    Install Oracle BI Publisher Desktop

hi,
   I have the installed the same BI Publisher Desktop 11g (11.1.1.6.0) of 32 bit for Windows 7 64-bit. Just add the below code in your configuration setting file of your oracle BI publisher standalone(server side)-> install-> there you can find a file called oraparam.ini (its a configuration settings file).
code is
[Certified Versions]
#You can customise error message shown for failure, provide value for CERTIFIED_VERSION_FAILURE_MESSAGE
Windows=4.0,5.0,5.1,5.2,6.0,6.1
[Windows-5.2-optional]
[Windows-6.1-required]
# Minimum display colours for OUI to run
MIN_DISPLAY_COLORS = 256
# Minimum CPU speed required for OUI
# CPU = 300
Red mark is the code which you need to add in the configuration file. black marked code is the code which already exiting in the file.
add this code before installing the desktop. then try to install. this time the software will install successfully.

Oracle 11g R2 RAC installation on AIX

hi,
I wana setup Oracle 11g R2 RAC on Ibm with AIX. Is there any good document or cookbook explaining step by step procedure for the installation...I'll be thankful
thanx

Hi;
Please check below links which is mention about 11gR2 Rac installation on AIX
11gR2 RAC installation in AIX help urgent
Re: 11gR2 RAC installation in AIX help urgent...!!!!
11gR2 RAC Installation Manual (with ASM+Rawdevice)
http://www.goodus.com/knowledge_pds/%EA%B8%B0%EC%88%A0%EB%85%B8%ED%8A%B8_11gR2_RAC_Guide.pdf
Regard
Helios

Oracle SOA Suite 10g Installation Error

The installation of SOA Suite in Solaris 5.10 ends with the following error. I would really appreciate if anyone could help me solve it.
The content of ~/oraInventory/logs/oraInstall2008-04-17_02-22-00PM.out:
Oracle JAAS [Thu Apr 17 14:27:05 MSD 2008] admin password is changed successfully
opmnctl: starting opmn and all managed processes...
opmnctl: opmn start failed.
The following configuration assistants have not been successfully completed. These assistants must be completed for your product to be completely configured.
Execute file /zones/u01/app/oas/product/oas10g/cfgtoollogs/configToolCommands to re-run all skipped/failed configuration assistants.
/zones/u01/app/oas/product/oas10g/jdk/bin/java -cp /zones/u01/app/oas/product/oas10g/j2ee/home/applications/ascontrol/ascontrol/WEB-INF/lib/ascontrol.jar:/zones/u01/app/oas/product/oas10g/j2ee/home/applications/ascontrol/ascontrol/WEB-INF/lib/log4j-core.jar:/zones/u01/app/oas/product/oas10g/jlib/oraclepki.jar:/zones/u01/app/oas/product/oas10g/jlib/ojmisc.jar: oracle.sysman.ias.studio.installer.ASControlConfigAssistant -sso true -j2eeinstance home -username oc4jadmin -password Protected value, not to be logged -oraclehome /zones/u01/app/oas/product/oas10g
/zones/u01/app/oas/product/oas10g/jdk/bin/java -jar /zones/u01/app/oas/product/oas10g/bpel/system/services/lib/bpm-install.jar installSOABasic -oracle-home "/zones/u01/app/oas/product/oas10g" -http-proxy-required false -dbvendor oracle -database umd-mas 1521 OASDB -username ORABPEL -password Protected value, not to be logged -ias-name APPSRV.umd-mas -iasadmin-password Protected value, not to be logged -sso true -homeContainer home -ohstype oc4j -ohshost umd-mas -ohsport 8889
/zones/u01/app/oas/product/oas10g/owsm/bin/wsmadmin.sh install
/zones/u01/app/oas/product/oas10g/perl/bin/perl /zones/u01/app/oas/product/oas10g/config/launchopmnCA.pl
/zones/u01/app/oas/product/oas10g/ant/bin/ant -buildfile /zones/u01/app/oas/product/oas10g/webservices/lib/wsil-install.xml -logfile /zones/u01/app/oas/product/oas10g/cfgtoollogs/wsil.txt -DHOST=umd-mas -DOPMNPORT="6003" -DADMIN_USER=oc4jadmin -DOPMNINSTANCE=home -Denv.JAVA_HOME=/zones/u01/app/oas/product/oas10g/jdk -Denv.ANT_HOME=/zones/u01/app/oas/product/oas10g/ant -Denv.ORACLE_HOME=/zones/u01/app/oas/product/oas10g -DENABLE_SSO=true Protected value, not to be logged
An excerpt from $ORACLE_HOME/cfgtoollogs/configtools2008-04-17_02-22-00PM.log:
Launched configuration assistant 'Oracle Application Server Configuration Assistant'
Tool type is: Optional.
The command being spawned is: '/zones/u01/app/oas/product/oas10g/jdk/bin/java -cp /zones/u01/app/oas/product/oas10g/j2ee/home/applic
ations/ascontrol/ascontrol/WEB-INF/lib/ascontrol.jar:/zones/u01/app/oas/product/oas10g/j2ee/home/applications/ascontrol/ascontrol/WE
B-INF/lib/log4j-core.jar:/zones/u01/app/oas/product/oas10g/jlib/oraclepki.jar:/zones/u01/app/oas/product/oas10g/jlib/ojmisc.jar: ora
cle.sysman.ias.studio.installer.ASControlConfigAssistant -sso true -j2eeinstance home -username oc4jadmin -password *Protected value
, not to be logged* -oraclehome /zones/u01/app/oas/product/oas10g'
Configuration assistant "Oracle Application Server Configuration Assistant" failed

I found the solution, if anyone has the same error, here is the solution:
The cause of an error was improper configuration of the host. The ping returned two different IP addresses:
oas@myhost $ ping -a myhost
myhost (333.333.333.333) is alive
oas@myhost $ ping -a myhost.domain.com
myhost.domain.com (555.555.555.555) is alive
I removed the wrong IP address for myhost.domain.com in /etc/inet/ipnodes:
[email protected] # cat /etc/inet/ipnodes
# Internet host table
::1 localhost
127.0.0.1 localhost
555.555.555.555 myhost.domain.com loghost
Now the ping is correct:
oas@myhost $ ping -a myhost
myhost (333.333.333.333) is alive
oas@myhost $ ping -a myhost.domain.com
myhost.domain.com (333.333.333.333)) is alive
Now installation finished successfully.
Message was edited by:
Rahat Agivetova

Windows 7 installation error: "Apple Mobile Device" failed to start.

Towards end of recent iTunes software update on Windows 7, I had an installation error within starting services "Apple Mobile Device" failed to start, etc. Pressed IGNORE option. Appears to install but fails to load saying msvcr80.dll missing.
Any ideas. The old version of iTunes now loads ok but will not connect to my iPhone 4S. It crashes when the iPhone option is clicked.

You need to follow the instructons of tt2 in https://discussions.apple.com/thread/5822086 to straighten that out.

Create a physical standby for Rac on Windows and raw devices

Hi buddies:
I need to create a Physical standby database for a 2 node RAC cluster on Windows, that is using RAW devices.
Can someone of you suggest me a note to follow in order to achive this, i can not find to much information about how to do this.
I guess that the best option would be to use RMAN to do this, but as i said before i havent found too much information.
I would really appreciate your help.
Kind regards
MQ

In this case the standby should be created as a single instance on regular files.
Do i have to specify something different in the duplicate rman command to specify that the standby database will be a single instance?
Thanks for your help
MQ

RAC installation error on VMWARE

Hi all,
I am trying to install Oracle clustreware 10.2.0 with 2 nodes on windows 2003 server in vmware environment. The installation got stucked in the middle and shows a message - Abnormal program termination. An internal error has occured. Please provide the following files to Oracle Support :
"C:\Program Files\Oracle\Inventory\logs\installActions2009-05-31_06-12-24PM.log"
"C:\Program Files\Oracle\Inventory\logs\oraInstall2009-05-31_06-12-24PM.err"
"C:\Program Files\Oracle\Inventory\logs\oraInstall2009-05-31_06-12-24PM.out"
The contents of the oraInstall2009-05-31_06-12-24PM.err is: -
Exception java.lang.NullPointerException occurred..
java.lang.NullPointerException
     at oracle.xml.parser.v2.XMLReader.pushXMLReader(XMLReader.java:206)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:205)
     at oracle.sysman.oii.oiic.OiicConfigInitializeWCCE.addStepsForPostInstallClassTool(OiicConfigInitializeWCCE.java:1470)
     at oracle.sysman.oii.oiic.OiicConfigInitializeWCCE.doOperation(OiicConfigInitializeWCCE.java:521)
     at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
     at oracle.sysman.oii.oiif.oiifw.OiifwActionsPhaseWCDE.doOperation(OiifwActionsPhaseWCDE.java:607)
     at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:147)
     at oracle.sysman.oii.oiic.OiicInstallSession$OiicSelCompsInstall.doOperation(OiicInstallSession.java:3863)
     at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
     at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1278)
     at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
     at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:572)
     at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:962)
     at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:899)
The raw disk configuration is : -
Disk Partition Sharing Nodes (2 in count)
\Device\Harddisk1\Partition1 rac2 rac1
Disk Partition Sharing Nodes (2 in count)
\Device\Harddisk2\Partition1 rac2 rac1
Disk Partition Sharing Nodes (2 in count)
\Device\Harddisk3\Partition1 rac2 rac1
Disk Partition Sharing Nodes (2 in count)
\Device\Harddisk4\Partition1 rac2 rac1
Disk Partition Sharing Nodes (2 in count)
\Device\Harddisk5\Partition1 rac2 rac1
Interface information for node "rac2"
Interface Name IP Address Subnet
Public 192.168.2.102 192.168.2.0
Private 192.168.0.102 192.168.0.0
Interface information for node "rac1"
Interface Name IP Address Subnet
Public 192.168.2.101 192.168.2.0
Private 192.168.0.101 192.168.0.0
Check: Node connectivity of subnet "192.168.2.0"
Source Destination Connected?
rac2:Public rac1:Public yes
Result: Node connectivity check passed for subnet "192.168.2.0" with node(s) rac
2,rac1.
Check: Node connectivity of subnet "192.168.0.0"
Source Destination Connected?
rac2:Private rac1:Private yes
Result: Node connectivity check passed for subnet "192.168.0.0" with node(s) rac
2,rac1.
Suitable interfaces for the private interconnect on subnet "192.168.2.0":
rac2 Public:192.168.2.102
rac1 Public:192.168.2.101
Suitable interfaces for the private interconnect on subnet "192.168.0.0":
rac2 Private:192.168.0.102
rac1 Private:192.168.0.101
Please help me to resolve this problem.

The message says "contact Oracle support." Why didn't you?
Because, I presume, you know that you are trying to create a totally unsupported environment.
Throw away the VMWare, go to Oracle VM on Oracle Enterprise Linux and you will find a much happier experience.
Happier too because RAC on Windows is not a pretty sight when it comes to transparent failover.
But please help me out with some of what you posted
1. Did you run the cluster verify tool? Post the full results
2. Did you create VIPs?
3. Can you ssh unchallenged between the two machines?

RAC installation error

Hi!
Can anyone help me with this one?
I have trying to installa RAC 10g R2 in Windows Server 2008 R2. I am encountering the error below:
OUI-35073: Exception occured while starting service in the remote nodes. Could not start the service 'OracleClusterVolumeService' in the remote cluster
nodes. The specified service does not exist as an installed service

Hi,
same as your other posts. Please have a look at the documentation and search for the RAC Starter Kits in support.oracle.com.
I believe you have a general setup problem in your environment.
Please post some more information, than just the error. Otherwise it is hard to help you.
Regards
Sebastian

Rac installation error ocrconfig.bin

Hi.
I just started to install Oracle 10gR2 clusterware, but after I finnished GUI installer it asked to execute 2 scripts. The first one executed without any problems, but the second one didn't. I couldn't find any propriate solutions which works.
[code]duke_rac_2 12:45:21 root:/home/oracle/product/crs_home# ./root.sh
WARNING: directory '/home/oracle/product' is not owned by root
WARNING: directory '/home/oracle' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
exec(): 0509-036 Cannot load program /home/oracle/product/crs_home/bin/ocrconfig.bin because of the following errors:
        0509-150   Dependent module libttsh10.a(shr_ttsh10.o) could not be loaded.
        0509-022 Cannot load module libttsh10.a(shr_ttsh10.o).
        0509-026 System error: A file or directory in the path name does not exist.
Failed to upgrade Oracle Cluster Registry configuration[/code]
OS: AIX 6.1 TL level 8
What should I do?

The message says "contact Oracle support." Why didn't you?
Because, I presume, you know that you are trying to create a totally unsupported environment.
Throw away the VMWare, go to Oracle VM on Oracle Enterprise Linux and you will find a much happier experience.
Happier too because RAC on Windows is not a pretty sight when it comes to transparent failover.
But please help me out with some of what you posted
1. Did you run the cluster verify tool? Post the full results
2. Did you create VIPs?
3. Can you ssh unchallenged between the two machines?

Oracle 10g Express Edition Installation Error

I have downloaded 10g Express Edition and am trying to install. After clicking on the OracleXE.exe file, I get the following error:
Error applying transforms. Verify that the specified transform paths are valid. C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST
I have verified that the path and file exists. What else should I do?

Here is the Ipconfig settings:
ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : jfunk
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : Yes
Ethernet adapter Local Area Connection 11:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.100.100
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection 5:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : 3Com 3C920 Integrated Fast Ethernet
Controller (3C905C-TX Compatible) #4
Physical Address. . . . . . . . . : 00-08-74-48-AE-AB
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.5
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 200.105.128.40
200.105.128.41
C:\Documents and Settings\funk>
No luck in changing the Temp environment setting. Here is the latest log.
=== Verbose logging started: 8/22/2007 16:55:24 Build type: SHIP UNICODE 3.01.4000.4039 Calling process: c:\PROGRA~1\COMMON~1\INSTAL~1\Driver\11\INTEL3~1\IDriver.exe ===
MSI (c) (10:B8) [16:55:24:765]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'c:\temp\_is5F\Oracle Database 10g Express Edition.msi' against software restriction policy
MSI (c) (10:B8) [16:55:24:765]: Note: 1: 2262 2: DigitalSignature 3: -2147287038
MSI (c) (10:B8) [16:55:24:765]: SOFTWARE RESTRICTION POLICY: c:\temp\_is5F\Oracle Database 10g Express Edition.msi is not digitally signed
MSI (c) (10:B8) [16:55:24:765]: SOFTWARE RESTRICTION POLICY: c:\temp\_is5F\Oracle Database 10g Express Edition.msi is permitted to run at the 'unrestricted' authorization level.
MSI (c) (10:B8) [16:55:24:775]: Cloaking enabled.
MSI (c) (10:B8) [16:55:24:775]: Attempting to enable all disabled priveleges before calling Install on Server
MSI (c) (10:B8) [16:55:24:775]: End dialog not enabled
MSI (c) (10:B8) [16:55:24:775]: Original package ==>
MSI (c) (10:B8) [16:55:24:775]: Package we're running from ==> c:\temp\_is5F\Oracle Database 10g Express Edition.msi
MSI (c) (10:B8) [16:55:24:775]: Transforming table Property.
MSI (c) (10:B8) [16:55:24:775]: APPCOMPAT: looking for appcompat database entry with ProductCode '{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}'.
MSI (c) (10:B8) [16:55:24:775]: APPCOMPAT: no matching ProductCode found in database.
MSI (c) (10:B8) [16:55:24:775]: MSCOREE not loaded loading copy from system32
MSI (c) (10:B8) [16:55:24:785]: Looking for file transform: C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST
MSI (c) (10:B8) [16:55:24:785]: Unable to create a temp copy of transform 'C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST'.
MSI (c) (10:B8) [16:55:24:785]: Note: 1: 2203 2: C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST 3: -2147287037
MSI (c) (10:B8) [16:55:24:785]: Couldn't find cached transform C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST. Looking for it at the source.
MSI (c) (10:B8) [16:55:24:785]: Resolving source.
MSI (c) (10:B8) [16:55:24:785]: Resolving source to launched-from source.
MSI (c) (10:B8) [16:55:24:785]: Setting launched-from source as last-used.
MSI (c) (10:B8) [16:55:24:785]: SOURCEDIR ==> c:\temp\_is5F\
MSI (c) (10:B8) [16:55:24:785]: SOURCEDIR product ==> {F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}
MSI (c) (10:B8) [16:55:24:785]: Looking for file transform: C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST
MSI (c) (10:B8) [16:55:24:785]: Unable to create a temp copy of transform 'C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST'.
MSI (c) (10:B8) [16:55:24:785]: Note: 1: 2203 2: C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST 3: -2147287037
MSI (c) (10:B8) [16:55:24:785]: Couldn't find cached transform C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST. Looking for it at the source.
MSI (c) (10:B8) [16:55:24:785]: Looking for file transform: c:\temp\_is5F\1033.MST
MSI (c) (10:B8) [16:55:24:795]: Original transform ==> c:\temp\_is5F\1033.MST
MSI (c) (10:B8) [16:55:24:795]: Transform we're running from ==> C:\temp\5d536d5.mst
MSI (c) (10:B8) [16:55:24:795]: Found missing cached transform c:\temp\_is5F\1033.MST. Adding it to re-cache list.
MSI (c) (10:B8) [16:55:24:795]: SOFTWARE RESTRICTION POLICY: Verifying transform --> 'c:\temp\_is5F\1033.MST' against software restriction policy
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: DigitalSignature 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: SOFTWARE RESTRICTION POLICY: c:\temp\_is5F\1033.MST is not digitally signed
MSI (c) (10:B8) [16:55:24:795]: SOFTWARE RESTRICTION POLICY: c:\temp\_is5F\1033.MST is permitted to run at the 'unrestricted' authorization level.
MSI (c) (10:B8) [16:55:24:795]: Validating transform 'C:\temp\5d536d5.mst' with validation bits 0
MSI (c) (10:B8) [16:55:24:795]: Transform 'C:\temp\5d536d5.mst' is valid.
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: Patch 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: PatchPackage 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: _Tables 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: _Columns 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: Media 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: File 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: PatchPackage 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: Patch 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: TRANSFORM: 'PatchPackage' table is missing or empty. No pre-transform fixup necessary.
MSI (c) (10:B8) [16:55:24:795]: TRANSFORM: Applying regular transform to database.
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: _Tables 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: _Columns 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: ActionText 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: AdminExecuteSequence 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: Condition 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: AdminUISequence 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: AdvtExecuteSequence 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: AdvtUISequence 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: AppId 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: AppSearch 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2251 2: c:\temp\_is5F\Oracle Database 10g Express Edition.msi 3: Property
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2729
DEBUG: Error 2251: Database: c:\temp\_is5F\Oracle Database 10g Express Edition.msi Transform: Cannot delete row that doesn't exist. Table: Property
1: 2251 2: c:\temp\_is5F\Oracle Database 10g Express Edition.msi 3: Property
Error applying transforms. Verify that the specified transform paths are valid.
c:\temp\_is5F\1033.MST
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 1708
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2729
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2729
MSI (c) (10:B8) [16:55:24:805]: Product: Oracle Database 10g Express Edition -- Installation failed.
MSI (c) (10:B8) [16:55:24:805]: Attempting to delete file C:\temp\5d536d5.mst
MSI (c) (10:B8) [16:55:24:805]: Unable to delete the file. LastError = 32
=== Verbose logging stopped: 8/22/2007 16:55:24 ===
I am on my last attempt here if there are no other concrete solutions. Guess I will have to wait for 11g to make it to the Windows environment. Any other previous version of 10g that I can try????

Oracle 10g db Silent installation error

Hi All,
I am getting this error while going for silent installation :
SEVERE:Values for the following variables could not be obtained from the command line or response file(s):
DEP_MODE(InstallType),
TLDepModes(TopLevelInstallType)
Here is response file and execution summary :
=============================================================
$ ./runInstaller -silent -responseFile /dumps/oracle4linux/dvd/database/responsevenf
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-11-14_03-07-37AM. Please wait ...[oracle@hrmodev database]$ Oracle Universal Installer, Version 10.2.0.1.0 Production
Copyright (C) 1999, 2005, Oracle. All rights reserved.
You can find a log of this install session at:
/arch/ptchdb/db/tech_st/10.2.0/admin/oui/PTCH_hrmodev/oraInventory/logs/installActions2008-11-14_03-07-37AM.log
.................................................................................................... 100% Done.
SEVERE:Values for the following variables could not be obtained from the command line or response file(s):
DEP_MODE(InstallType),
TLDepModes(TopLevelInstallType)
Silent install cannot continue.
=============================================================
Here is my response file :
[General]
RESPONSEFILE_VERSION=1.0.0.0.0
[Session]
#This entry is not used on Windows platforms
#UNIX_GROUP_NAME;String;Used in Dialog
#Group that the current user is part of, for ownership of the install files.
UNIX_GROUP_NAME="dba"
#FROM_LOCATION;String;Used in Dialog
#Full path for the products.jar file.
#Replace the X: with the drive letter of your CD-ROM device.
FROM_LOCATION="/dumps/oracle4linux/dvd/database/stage/products.xml"
#FROM_LOCATION_CD_LABEL;String:Used in multi-CD installations.
#It includes the label of the Compact Disk where the file "products.jar" exists.
#The label can be found in the file "disk.label" in the same directory as
#"products.jar".
#ORACLE_HOME;String;Used in Dialog
#Enter the path to your oracle home. Replace the drive letter and optionally
#alter the home path.
ORACLE_HOME="/visapp/venforth/app/oracle/"
#ORACLE_HOME_NAME;String;Used in Dialog
#Enter the name of this oracle home. The name will be used to identify this
#home.
ORACLE_HOME_NAME="VENF"
#TOPLEVEL_COMPONENT;StringList;Used in Dialog
#Choices: "oracle.server", "8.1.5.0.0"
#TOPLEVEL_COMPONENT={"oracle.server", "8.1.5.0.0"}
#TOPLEVEL_COMPONENT={"oracle.rdbms","9.2.0.4.0"}
TOPLEVEL_COMPONENT={"oracle.swd","2.2.1.2.0"}
#SHOW_COMPONENT_LOCATIONS_PAGE;Boolean;Used in Dialog
#Some components are flexible in where they are installed, although all have
# default locations. Set this to FALSE if you want to accept the default locations
# and not show this page.
SHOW_COMPONENT_LOCATIONS_PAGE=false
#SHOW_SUMMARY_PAGE;Boolean;Used in Dialog <---------------
#MUST be <false> for "silent" install
SHOW_SUMMARY_PAGE=false
#SHOW_INSTALL_PROGRESS_PAGE;Boolean;Used in Dialog <---------------
#MUST be <false> for "silent" install
SHOW_INSTALL_PROGRESS_PAGE=false
#SHOW_REQUIRED_CONFIG_TOOL_PAGE;Boolean;Used in Dialog
SHOW_REQUIRED_CONFIG_TOOL_PAGE=false
#SHOW_OPTIONAL_CONFIG_TOOL_PAGE;Boolean;Used in Dialog
SHOW_OPTIONAL_CONFIG_TOOL_PAGE=false
#SHOW_END_SESSION_PAGE;Boolean;Used in Dialog <---------------
#MUST be <false> for "silent" install
SHOW_END_SESSION_PAGE=false
#Parameter : LOCATION_FOR_DISK2
#Type : String
#Description : Complete path to the other disks.
#Example : LOCATION_FOR_DISK2 = "..\..\Disk2"
#LOCATION_FOR_DISK2="F:\teststage\cd\Disk3"
#Parameter : NEXT_SESSION
#Type : Boolean
#Description : Set to true if the installer needs to go to the File Locations page for another installation.
#Example : NEXT_SESSION = true
NEXT_SESSION=false
#Parameter : SHOW_SPLASH_SCREEN
#Type : Boolean
#Description : Set to true if the initial splash screen in the installer needs to be shown.
#Example : SHOW_SPLASH_SCREEN = true
SHOW_SPLASH_SCREEN=false
#Parameter : SHOW_WELCOME_PAGE
#Type : Boolean
#Description : Set to true if the Welcome page in the installer needs to
be shown.
#Example : SHOW_WELCOME_PAGE = false
SHOW_WELCOME_PAGE=false
#Parameter : SHOW_ROOTSH_CONFIRMATION
#Type : Boolean
#Description : Set to true if the Confirmation dialog asking to run the root.sh script in the installer needs to be shown.
#Valid only in Unix platforms.
#Example : SHOW_ROOTSH_CONFIRMATION = true
SHOW_ROOTSH_CONFIRMATION=false
#Parameter : SHOW_EXIT_CONFIRMATION
#Type : Boolean
#Description : Set to true if the confirmation when exiting the installer needs to be shown.
#Example : SHOW_EXIT_CONFIRMATION = true
SHOW_EXIT_CONFIRMATION=false
[oracle.server_8.1.5.0.0]
#INSTALL_TYPE;String;Used in Dialog
# Minimal - Optional pre-configured DB (b_createDB), Networking services, Server utilities
# Typical - Pre-configured starter DB, Licensable options and Cartridges,
# Networking services, Server utilities
INSTALL_TYPE="Typical"
DEP_MODE = Custom
TLDepModes = Custom
[oracle.rdbms_8.1.5.0.0]
#OPTIONAL_CONFIG_TOOLS;StringList
#OPTIONAL_CONFIG_TOOLS={"dbassist"} OR OPTIONAL_CONFIG_TOOLS={"Oracle Database Configuration Assistant"}
#s_GlobalDBName;String;Used in Dialog
#This is the name of the database which will be created as part of the typical install.
#You should modify this string to use an appropriate name.
s_GlobalDBName="VENF"
#This entry not needed for Windows installation.
#s_mountPoint;String;Used in Dialog
#Database file location: directory for datafiles, control files, redo logs
#s_mountPoint="/visapp/venforth/oradata/"
#s_dbSid;String;Used in Dialog
#Value for ORACLE_SID. Change this to an appropriate SID.
s_dbSid="VENF"
#b_createDB;Boolean
#Relevant only in MINIMAL, set to TRUE if you want a starter database, set to FALSE if not.
b_createDB=true
Edited by: Kishore KVR on Nov 14, 2008 2:56 PM

Hi,
Have you checked for any errors in log file....????
Can you connect via SQL*PLUS ... , for example...????
Regards,
Simon

Oracle 10g Database control installation error

Hi,
Installing oracle 10g database control had give me an error.But Repository created successfully . please find the log file below
Is there i need to install ...? before i start to run emca to install Database Control.
my points of interest are here
FileNotFoundException: /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/http-web-site.xml (No such file or directory)
i didn't find jms.xml,rmi.xml,http-web-site.xml etc in this location /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/
File/directory /opt/db/oracle/product/10.2.0/sysman/emdrep/config/repository.variables does not exist
Let me know how to slove this error.
Thanks,
anil
Error
=========
emca -config dbcontrol db -repos create
STARTED EMCA at Apr 8, 2008 4:33:25 PM
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: XXX
Listener port number: 1521
Password for SYS user:
Password for DBSNMP user:
Password for SYSMAN user:
Email address for notifications (optional):
Outgoing Mail (SMTP) server for notifications (optional):
You have specified the following settings
Database ORACLE_HOME ................ /opt/db/oracle/product/10.2.0
Database hostname ................ xxx.xxxx.local
Listener port number ................ 1521
Database SID ................ XXX
Email address for notifications ...............
Outgoing Mail (SMTP) server for notifications ...............
Do you wish to continue? [yes(Y)/no(N)]: yes
Apr 8, 2008 4:34:55 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_2008-04-08_04-33-25-PM.log.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig updateReposVars
SEVERE: File/directory /opt/db/oracle/product/10.2.0/sysman/emdrep/config/repository.variables does not existApr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Failed to unlock all EM-related accounts
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to unlock all EM-related accounts
Refer to the log file at /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_2008-04-08_04-33-25-PM.log for more details.
Could not complete the configuration. Refer to the log file at /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_2008-04-08_04-33-25-PM.log for more details.
the following is log generated (emca_2008-04-08_04-33-25-PM.log)
Apr 8, 2008 4:34:56 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to /opt/db/oracle/product/10.2.0/oui
Apr 8, 2008 4:34:56 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to /opt/db/oracle/product/10.2.0/oui
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Homes to scan for used ports: [opt/db/oracle/product/10.2.0]
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME /opt/db/oracle/product/10.2.0
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/jms.xml in searching for tag jms-server with att
ribute port
java.io.FileNotFoundException: /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/jms.xml (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at java.io.FileReader.<init>(FileReader.java:41)
at oracle.sysman.emcp.util.PortManager.findUsedPortsFromXML(PortManager.java:282)
at oracle.sysman.emcp.util.PortManager.markAllUsedPorts(PortManager.java:1172)
at oracle.sysman.emcp.util.PortManager.getFreePorts(PortManager.java:543)
at oracle.sysman.emcp.EMDBPreConfig.getFreePorts(EMDBPreConfig.java:2324)
at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2261)
at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:670)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:233)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/rmi.xml in searching for tag rmi-server with att
ribute port
java.io.FileNotFoundException: /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/rmi.xml (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at java.io.FileReader.<init>(FileReader.java:41)
at oracle.sysman.emcp.util.PortManager.findUsedPortsFromXML(PortManager.java:282)
at oracle.sysman.emcp.util.PortManager.markAllUsedPorts(PortManager.java:1176)
at oracle.sysman.emcp.util.PortManager.getFreePorts(PortManager.java:543)
at oracle.sysman.emcp.EMDBPreConfig.getFreePorts(EMDBPreConfig.java:2324)
at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2261)
at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:670)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:233)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: null from /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/http-web-site.xml in searching for tag web-site
with attribute port
java.io.FileNotFoundException: /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/http-web-site.xml (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at java.io.FileReader.<init>(FileReader.java:41)
at oracle.sysman.emcp.util.PortManager.findUsedPortsFromXML(PortManager.java:282)
at oracle.sysman.emcp.util.PortManager.markAllUsedPorts(PortManager.java:1180)
at oracle.sysman.emcp.util.PortManager.getFreePorts(PortManager.java:543)
at oracle.sysman.emcp.EMDBPreConfig.getFreePorts(EMDBPreConfig.java:2324)
at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2261)
at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:670)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:233)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: null from /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file /opt/db/oracle/product/10.2.0/sysman/config/emd.properties
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from /opt/db/oracle/product/10.2.0/sysman/config/emd.properties
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file /opt/db/oracle/product/10.2.0/install/staticports.ini
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager getFreePorts
CONFIG: /opt/db/oracle/product/10.2.0:mcidm11.pacs11.local:null:SDM:{}:null:{DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_SDM.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: AGENT_PORT_SDM value: 3938
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_SDM.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBCONTROL_HTTP_PORT_SDM value: 1158
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_SDM.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: JMS_PORT_SDM value: 5540
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_SDM.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: RMI_PORT_SDM value: 5520
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMDBPreConfig getFreePorts
CONFIG: Ports assigned for SID: SDM : {DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: SDM, oracleHome: /opt/db/oracle/product/10.2.0, and user: SYS
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig createRepository
CONFIG: Spooling to /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_repos_create_2008-04-08_04-34-58-PM.log
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: SDM, oracleHome: /opt/db/oracle/product/10.2.0, and user: SYS
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig grantPrivsToDbsnmp
CONFIG: Exception while granting priviliges.
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-00942: table or view does not exist
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1467)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1708)
at oracle.sysman.emcp.EMReposConfig.grantPrivsToDbsnmp(EMReposConfig.java:503)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:208)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:124)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Failed to grant priviliges to dbsnmp.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig updateReposVars
SEVERE: File/directory /opt/db/oracle/product/10.2.0/sysman/emdrep/config/repository.variables does not existApr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: SDM, oracleHome: /opt/db/oracle/product/10.2.0, and user: SYS
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocking dbsnmp and sysman
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: ORA-06550: line 1, column 62:
PLS-00201: identifier 'SYSMAN.MGMT_VIEW_PRIV' must be declared
ORA-06550: line 1, column 62:
PL/SQL: Statement ignored
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-06550: line 1, column 62:
PLS-00201: identifier 'SYSMAN.MGMT_VIEW_PRIV' must be declared
ORA-06550: line 1, column 62:
PL/SQL: Statement ignored
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1467)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1708)
at oracle.sysman.emcp.EMReposConfig.unlockAccounts(EMReposConfig.java:566)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:235)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:124)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Failed to unlock all EM-related accounts
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to unlock all EM-related accounts
Refer to the log file at /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_2008-04-08_04-33-25-PM.log for more details.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Failed to unlock all EM-related accounts
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:239)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:124)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)

Hi all,
i started creating database control repository, when i saw emca running i had seen repository created successfully , but sysman user is not created at this point of time. Then i looked into emca_repos_create_2008-04-10_11-57-03-AM.log file but the file is unable to open because it's looking for file emreposcre.sql which creates sysman user in this location /opt/db/oracle/product/10.2.0/sysman/admin/emdrep/sql/
i feel while installing the database these files are not created....? or i need to run any scripts before running emca ....?
give me some inputs to this thread.
Thanks,
nil
STARTED EMCA at Apr 10, 2008 11:55:41 AM
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: XXXXX
Listener port number: 1521
Password for SYS user:
Password for SYSMAN user:
Do you wish to continue? [yes(Y)/no(N)]: yes
Apr 10, 2008 11:57:02 AM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /opt/db/oracle/product/10.2.0/cfgtoollog
Apr 10, 2008 11:57:03 AM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Apr 10, 2008 11:57:03 AM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
Enterprise Manager configuration completed successfully
FINISHED EMCA at Apr 10, 2008 11:57:03 AM
mcidm11 10.2.0/bin>
CONFIG: Spooling to /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_repos_create_2008-04-10_11-57-03-AM.log
Apr 10, 2008 11:57:03 AM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Apr 10, 2008 11:57:03 AM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
mcidm11 emca/SDM> pwd
/opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM
mcidm11 emca/SDM> more emca_repos_create_2008-04-10_11-57-03-AM.log
SP2-0310: unable to open file "/opt/db/oracle/product/10.2.0/sysman/admin/emdrep/sql/emreposcre.sql"mcidm11 emca/SDM> cd
Directory: /opt/db
mcidm11 /opt/db> cd /opt/db/oracle/product/10.2.0/sysman/admin/emdrep/sql/
Directory: /opt/db/oracle/product/10.2.0/sysman/admin/emdrep/sql
mcidm11 emdrep/sql> ls
core db ias ocs

Oracle 11g release 2 installation error

Hi,
I am facing below error while oracle slient installation.
Checking swap space: must be greater than 150 MB. Actual 1498 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-09-02_12-44-52PM. Please wait ...[oracle@localhost database]$ [SEVERE] - Email Address Not Specified
A log of this session is currently saved as: /tmp/OraInstall2011-09-02_12-44-52PM/installActions2011-09-02_12-44-52PM.log. Oracle recommends that if
but setting
oracle.install.db.config.starterdb.dbcontrol.enableEmailNotification=false
# Specify the email address to which the notifications are to be sent.
oracle.install.db.config.starterdb.dbcontrol.emailAddress=nayana.chavda@elitecore.com
# Specify the SMTP server used for email notifications.
oracle.install.db.config.starterdb.dbcontrol.SMTPServer=
and
setting below two parameter
SECURITY_UPDATES_VIA_MYORACLESUPPORT=false
DECLINE_SECURITY_UPDATES=true
i am getting diferent error
$ Exception in thread "main" java.lang.NoClassDefFoundError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at java.awt.Toolkit$2.run(Toolkit.java:821)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:804)
at javax.swing.UIManager.initialize(UIManager.java:1262)
at javax.swing.UIManager.maybeInitialize(UIManager.java:1245)
at javax.swing.UIManager.getUI(UIManager.java:851)
at javax.swing.JPanel.updateUI(JPanel.java:104)
at javax.swing.JPanel.<init>(JPanel.java:64)
at javax.swing.JPanel.<init>(JPanel.java:87)
at javax.swing.JPanel.<init>(JPanel.java:95)
at oracle.sysman.oii.oiif.oiifo.OiifoOCMUI.<init>(OiifoOCMUI.java:125)
at oracle.sysman.oii.oiif.oiifo.OiifoOCMInterfaceManager.<init>(OiifoOCMInterfaceManager.java:79)
at oracle.sysman.oii.oiif.oiifo.OiifoOCMInterfaceManager.getInstance(OiifoOCMInterfaceManager.java:124)
at oracle.install.ivw.db.driver.DBInstaller.run(DBInstaller.java:123)
at oracle.install.commons.util.Application.startup(Application.java:869)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)
Please sugget on above error.
below is the db_install.rsp file
## Copyright(c) Oracle Corporation 1998,2008. All rights reserved.##
## Specify values for the variables listed below to customize ##
## your installation. ##
## Each variable is associated with a comment. The comment ##
## can help to populate the variables with the appropriate ##
## values.                                   ##
## IMPORTANT NOTE: This file contains plain text passwords and ##
## should be secured to have read permission only by oracle user ##
## or db administrator who owns this installation. ##
# Do not change the following system generated value.
oracle.install.responseFileVersion=/oracle/install/rspfmt_dbinstall_response_schema_v11_2_0
# Specify the installation option.
# It can be one of the following:
# 1. INSTALL_DB_SWONLY
# 2. INSTALL_DB_AND_CONFIG
# 3. UPGRADE_DB
oracle.install.option=INSTALL_DB_SWONLY
# Specify the hostname of the system as set during the install. It can be used
# to force the installation to use an alternative hostname rather than using the
# first hostname found on the system. (e.g., for systems with multiple hostnames
# and network interfaces)
ORACLE_HOSTNAME=localhost.localdomain
# Specify the Unix group to be set for the inventory directory.
UNIX_GROUP_NAME=oinstall
# Specify the location which holds the inventory files.
INVENTORY_LOCATION=/u01/app/oracle/oraInventory
# Specify the languages in which the components will be installed.
# en : English ja : Japanese
# fr : French ko : Korean
# ar : Arabic es : Latin American Spanish
# bn : Bengali lv : Latvian
# pt_BR: Brazilian Portuguese lt : Lithuanian
# bg : Bulgarian ms : Malay
# fr_CA: Canadian French es_MX: Mexican Spanish
# ca : Catalan no : Norwegian
# hr : Croatian pl : Polish
# cs : Czech pt : Portuguese
# da : Danish ro : Romanian
# nl : Dutch ru : Russian
# ar_EG: Egyptian zh_CN: Simplified Chinese
# en_GB: English (Great Britain) sk : Slovak
# et : Estonian sl : Slovenian
# fi : Finnish es_ES: Spanish
# de : German sv : Swedish
# el : Greek th : Thai
# iw : Hebrew zh_TW: Traditional Chinese
# hu : Hungarian tr : Turkish
# is : Icelandic uk : Ukrainian
# in : Indonesian vi : Vietnamese
# it : Italian
# Example : SELECTED_LANGUAGES=en,fr,ja
SELECTED_LANGUAGES=en
# Specify the complete path of the Oracle Home.
ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1
# Specify the complete path of the Oracle Base.
ORACLE_BASE=/u01/app/oracle
# Specify the installation edition of the component.
# The value should contain only one of these choices.
# EE : Enterprise Edition
# SE : Standard Edition
# SEONE : Standard Edition One
# PE : Personal Edition (WINDOWS ONLY)
oracle.install.db.InstallEdition=EE
# This variable is used to enable or disable custom install.
# true : Components mentioned as part of 'customComponents' property
# are considered for install.
# false : Value for 'customComponents' is not considered.
oracle.install.db.isCustomInstall=false
# This variable is considered only if 'IsCustomInstall' is set to true.
# Description: List of Enterprise Edition Options you would like to install.
# The following choices are available. You may specify any
# combination of these choices. The components you choose should
# be specified in the form "internal-component-name:version"
# Below is a list of components you may specify to install.
# oracle.rdbms.partitioning:11.2.0.1.0 - Oracle Partitioning
# oracle.rdbms.dm:11.2.0.1.0 - Oracle Data Mining
# oracle.rdbms.dv:11.2.0.1.0 - Oracle Database Vault
# oracle.rdbms.lbac:11.2.0.1.0 - Oracle Label Security
# oracle.rdbms.rat:11.2.0.1.0 - Oracle Real Application Testing
# oracle.oraolap:11.2.0.1.0 - Oracle OLAP
oracle.install.db.customComponents=oracle.server:11.2.0.1.0,oracle.sysman.ccr:10.2.7.0.0,oracle.xdk:11.2.0.1.0,oracle.rdbms.oci:11.2.0.1.0,oracle.network:11.2.0.1.0,oracle.network.listener:11.2.0.1.0,oracle.rdbms:11.2.0.1.0,oracle.options:11.2.0.1.0,oracle.rdbms.partitioning:11.2.0.1.0,oracle.oraolap:11.2.0.1.0,oracle.rdbms.dm:11.2.0.1.0,oracle.rdbms.dv:11.2.0.1.0,orcle.rdbms.lbac:11.2.0.1.0,oracle.rdbms.rat:11.2.0.1.0
# PRIVILEGED OPERATING SYSTEM GROUPS      #
# Provide values for the OS groups to which OSDBA and OSOPER privileges #
# needs to be granted. If the install is being performed as a member of the #
# group "dba", then that will be used unless specified otherwise below.     #
# The DBA_GROUP is the OS group which is to be granted OSDBA privileges.
oracle.install.db.DBA_GROUP=DBA
# The OPER_GROUP is the OS group which is to be granted OSOPER privileges.
oracle.install.db.OPER_GROUP=
# Specify the cluster node names selected during the installation.
oracle.install.db.CLUSTER_NODES=
# Specify the type of database to create.
# It can be one of the following:
# - GENERAL_PURPOSE/TRANSACTION_PROCESSING
# - DATA_WAREHOUSE
oracle.install.db.config.starterdb.type=GENERAL_PURPOSE
# Specify the Starter Database Global Database Name.
oracle.install.db.config.starterdb.globalDBName=DB11G
# Specify the Starter Database SID.
oracle.install.db.config.starterdb.SID=DB11G
# Specify the Starter Database character set.
# It can be one of the following:
# AL32UTF8, WE8ISO8859P15, WE8MSWIN1252, EE8ISO8859P2,
# EE8MSWIN1250, NE8ISO8859P10, NEE8ISO8859P4, BLT8MSWIN1257,
# BLT8ISO8859P13, CL8ISO8859P5, CL8MSWIN1251, AR8ISO8859P6,
# AR8MSWIN1256, EL8ISO8859P7, EL8MSWIN1253, IW8ISO8859P8,
# IW8MSWIN1255, JA16EUC, JA16EUCTILDE, JA16SJIS, JA16SJISTILDE,
# KO16MSWIN949, ZHS16GBK, TH8TISASCII, ZHT32EUC, ZHT16MSWIN950,
# ZHT16HKSCS, WE8ISO8859P9, TR8MSWIN1254, VN8MSWIN1258
oracle.install.db.config.starterdb.characterSet=WE8ISO8859P15
# This variable should be set to true if Automatic Memory Management
# in Database is desired.
# If Automatic Memory Management is not desired, and memory allocation
# is to be done manually, then set it to false.
oracle.install.db.config.starterdb.memoryOption=true
# Specify the total memory allocation for the database. Value(in MB) should be
# at least 256 MB, and should not exceed the total physical memory available
# on the system.
# Example: oracle.install.db.config.starterdb.memoryLimit=512
oracle.install.db.config.starterdb.memoryLimit=
# This variable controls whether to load Example Schemas onto the starter
# database or not.
oracle.install.db.config.starterdb.installExampleSchemas=false
# This variable includes enabling audit settings, configuring password profiles
# and revoking some grants to public. These settings are provided by default.
# These settings may also be disabled.
oracle.install.db.config.starterdb.enableSecuritySettings=true
# Passwords can be supplied for the following four schemas in the     #
# starter database:                               #
# SYS #
# SYSTEM #
# SYSMAN (used by Enterprise Manager) #
# DBSNMP (used by Enterprise Manager) #
# Same password can be used for all accounts (not recommended)           #
# or different passwords for each account can be provided (recommended) #
# This variable holds the password that is to be used for all schemas in the
# starter database.
oracle.install.db.config.starterdb.password.ALL=sys
# Specify the SYS password for the starter database.
oracle.install.db.config.starterdb.password.SYS=sys
# Specify the SYSTEM password for the starter database.
oracle.install.db.config.starterdb.password.SYSTEM=sys
# Specify the SYSMAN password for the starter database.
oracle.install.db.config.starterdb.password.SYSMAN=sys
# Specify the DBSNMP password for the starter database.
oracle.install.db.config.starterdb.password.DBSNMP=sys
# Specify the management option to be selected for the starter database.
# It can be one of the following:
# 1. GRID_CONTROL
# 2. DB_CONTROL
oracle.install.db.config.starterdb.control=DB_CONTROL
# Specify the Management Service to use if Grid Control is selected to manage
# the database.
oracle.install.db.config.starterdb.gridcontrol.gridControlServiceURL=
# This variable indicates whether to receive email notification for critical
# alerts when using DB control.
oracle.install.db.config.starterdb.dbcontrol.enableEmailNotification=false
# Specify the email address to which the notifications are to be sent.
oracle.install.db.config.starterdb.dbcontrol.emailAddress=nayana.chavda@elitecore.com
# Specify the SMTP server used for email notifications.
oracle.install.db.config.starterdb.dbcontrol.SMTPServer=
# SPECIFY BACKUP AND RECOVERY OPTIONS      #
# Out-of-box backup and recovery options for the database can be mentioned #
# using the entries below.                              #
# This variable is to be set to false if automated backup is not required. Else
# this can be set to true.
oracle.install.db.config.starterdb.automatedBackup.enable=false
# Regardless of the type of storage that is chosen for backup and recovery, if
# automated backups are enabled, a job will be scheduled to run daily at
# 2:00 AM to backup the database. This job will run as the operating system
# user that is specified in this variable.
oracle.install.db.config.starterdb.automatedBackup.osuid=
# Regardless of the type of storage that is chosen for backup and recovery, if
# automated backups are enabled, a job will be scheduled to run daily at
# 2:00 AM to backup the database. This job will run as the operating system user
# specified by the above entry. The following entry stores the password for the
# above operating system user.
oracle.install.db.config.starterdb.automatedBackup.ospwd=
# Specify the type of storage to use for the database.
# It can be one of the following:
# - FILE_SYSTEM_STORAGE
# - ASM_STORAGE
oracle.install.db.config.starterdb.storageType=FILE_SYSTEM_STORAGE
# Specify the database file location which is a directory for datafiles, control
# files, redo logs.
# Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM
oracle.install.db.config.starterdb.fileSystemStorage.dataLocation=
# Specify the backup and recovery location.
# Applicable only when oracle.install.db.config.starterdb.storage=
oracle.install.db.config.starterdb.fileSystemStorage.recoveryLocation=
# Specify the existing ASM disk groups to be used for storage.
# Applicable only when oracle.install.db.config.starterdb.storage=ASM
oracle.install.db.config.asm.diskGroup=
# Specify the password for ASMSNMP user of the ASM instance.
# Applicable only when oracle.install.db.config.starterdb.storage=ASM_SYSTEM
oracle.install.db.config.asm.ASMSNMPPassword=
# Specify the My Oracle Support Account Username.
# Example : MYORACLESUPPORT_USERNAME=metalink
MYORACLESUPPORT_USERNAME=
# Specify the My Oracle Support Account Username password.
# Example : MYORACLESUPPORT_PASSWORD=password
MYORACLESUPPORT_PASSWORD=
# Specify whether to enable the user to set the password for
# My Oracle Support credentials. The value can be either true or false.
# If left blank it will be assumed to be false.
# Example : SECURITY_UPDATES_VIA_MYORACLESUPPORT=true
SECURITY_UPDATES_VIA_MYORACLESUPPORT=
# Specify whether user wants to give any proxy details for connection.
# The value can be either true or false. If left blank it will be assumed
# to be false.
# Example : DECLINE_SECURITY_UPDATES=false
DECLINE_SECURITY_UPDATES=
# Specify the Proxy server name. Length should be greater than zero.
# Example : PROXY_HOST=proxy.domain.com
PROXY_HOST=
# Specify the proxy port number. Should be Numeric and atleast 2 chars.
# Example : PROXY_PORT=25
PROXY_PORT=
# Specify the proxy user name. Leave PROXY_USER and PROXY_PWD
# blank if your proxy server requires no authentication.
# Example : PROXY_USER=username
PROXY_USER=
# Specify the proxy password. Leave PROXY_USER and PROXY_PWD
# blank if your proxy server requires no authentication.
# Example : PROXY_PWD=password
PROXY_PWD=
Thanks in advance.

Pl post details of OS and database versions. Pl see these MOS Docs
"Preparing to launch Oracle Universal Installer from /tmp/OraInstall... Please wait ...$ [SEVERE] - Email Address Not Specified" errors while installing Oracle database 11gR2 in silent mode (Doc ID 883714.1)
Silent Installation Fails with "SEVERE: Email Address Not Specified" (Doc ID 1087998.1)
Email Address Not Specified prompt during silent install (Doc ID 1109245.1)
HTH
Srini

Oracle 11G javaw Universal Installer error

Hey all,
I'm trying to install Oracle 11G on XP Pro and I'm having all sorts of problems. I downloaded the complete installer:
<b>Oracle Database 11g Release 1 (11.1.0.6.0)</b>
and I receive the following error when I attempt to install:
<b>The Java RunTime Enviroment was not found at bin/javaw.exe. Hence, the Oracle Universal Installer cannot be run. Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.</b>
I installed JRE 1.4.2.18 rebooted the computer and tried to install again and still recieved the same error.
I checked the path to javaw.exe in the Java Control Panel and the path is there. I even disabled the one that was created with the install and still no luck.
I saw something in the fourms about the need to disable your firewall because the Oracle Installer writes to the registry. I am running Macafee and have disabled my firewall and still no luck.
Finally, back to the Java Control Panel. Under the "Java tab" --> then clicking the "view" button under the "Java Application Runtime Settings" there are two tabs, "User" and "System" that show paths for the Java software location on the system. Under the "user" tab there are two entries for the JRE 1.4 and 1.6 platforms, but only one entry (1.6) under the "system" tab, with no way for me to add a path to that tab. Please note I am using an Administrator account
Thanks for any assistance

Hmmm...you downloaded the entire .zip file and checked the length?
You unzipped the file with directory structures intact?
You ran the setup file at the top of the unzipped directory strucure?
You read the installation manual and made sure all prerequisites for installation are met?

Oracle 9.2 RAC installation error on raw devices

Similar Messages

Maybe you are looking for