Oracle 9i and 9i Developer Suite don't work together

I've tried to install 9i and 9iDS in different homes. Then, I can work with SQL*Plus (of 9i) but all 9i DS's applications don't work at all. The main problem is that I can not connect to the Database of 9i.
Is there any body know the solution? Pls help, this is the first time I use developer suite to study Form and Report.

this tnsping was a great start. it allows the user to find another place to look for errors ora files.
I was looking in every instance of my TNSnames.ora files. the one in the 9i as well as the 10g were alike and fine. I had to comment out some bad lines from the 10g ora file. the tnsping found the SQLnet.ora file that contained an error. in this case the error was the same line needed to be commented out.
it is not that I forgot to do so but I didnt know that this line was even in any of the files.
this tnsping works as a great trouble shooter.
thanks...

Similar Messages

Z77A-GD65 - fast ram and Intel Rapid Start don't work together??

Greetings.
I have got 2x4Gbyte G.Skill CL10 2400Mhz ram. When running this ram at its default speed at 2400Mhz, Intel Rapid Start don't work. When I shut it down, it acts normal until the point where the system "wakes up" for a few seconds to write to the special partition for IRS. The PC then try to reboot, but after 2 attemps it says that the Overclocking has failed and I have the choise of F1 (setup) or F2 (load default settings and continue).
If I lower the ram speed below the default speed (i.e. don't use the XMP profile), then Intel Rapid Start works fine.
Memtest86 do not show any error at all after 4 pass with the G.Skill at 2400Mhz. To me it seems like the motherboard can't handle this speed at the state in Intel Rapid Start.
Anybody with info about what to do?

Quote from: RemusM on 16-January-14, 00:14:15
The internet is bloated with paid "reviews" ...
Here is what you have and what you paid for:
http://ark.intel.com/products/65520
Max Memory Size (dependent on memory type) : 32 GB
Memory Types : DDR3-1333/1600
Memory Channels : 2
Max Memory Bandwidth : 25.6 GB/s
Intel does not guarantee anything above 1600MHz.
On the top of that, 25.6 GB/s bandwidth is enough for DDR3-1600 in dual-channel only.
In other words, above 1600Mhz the perfomances boost is close to ZERO.
RAM speed over 1600Mhz does nothing? That WAS true, but not anymore. First of this:
Anandtech:
http://www.anandtech.com/show/6372/memory-performance-16gb-ddr31333-to-ddr32400-on-ivy-bridge-igp-with-gskill
xbitlabs:
http://www.xbitlabs.com/articles/memory/display/ivy-bridge-ddr3.html
overclock.net:
http://www.overclock.net/t/1438222/battlefield-4-ram-memory-benchmark
Second, I can messure a real performance difference when using this memory at 2400mhz vs 1600mhz, f.i. Winrar5.01 x64, when searching in reg.database, and other memoryhungry programs. My graphic-card is not powerfull enough to show any difference in games, but almost anything else I _can_ se a difference.
If you honestly can read these 3 links and still say, that memory speed does not matter, I think I know more about this than you
I'm quite sure, that a big place like Anandtech is not payed to show up this result.

Ipod and external Hard drive don't work together

I got a dell optiplex gx260 which has 6 2.0 USB ports. My IPod (80GB classinc) library is stored on external HDD. When I connect my HDD to the comp and point iTunes to the HDD library everything is good and I see my songs. As soon as I connect iPod it shows up “unknown device” in a device manager. If I disconnect HDD and connect iPod only windows finds it OK, but as soon as I plug HDD back in iPod disappears. I’ve tried reinstalling sys and inf files, pointing towards updated drivers and all nothing still the same thing, tried every port and every combination on the computer USB ports still the same thing iPod and HDD don’t want to work together. Please advice, thanks.

I got the same problem here but not just with IPod. When I power up my external disk (with aux power supply) my usb stick (or IPod or printer or scanner or other devices) on other ports get disconnected. All devices did work toghether some months ago.
I think this is related to a hardware problem. Things began to fail, when I tried to co-supply 5V to a device connected to my usb bus. I possibly toasted some logic on the motherbord.
Testing your hardware on a second system may help you. Or have a look if a USB stick instead of IPod gets disconnected too. This may prove that its not IPod related.
Good luck

IComment and "add comment" @ .mac don't work together

Hi guys,
i just used iComment to add trackback code from StatCounter, and did all things in the right way. The statistics worked. But then, the "add comment" function is gone, it disappeared from all pages. I am not using Haloscan to add comments, 'cause I use .Mac as my provider.
Can not these 2 programs work with each other? Any one got idea?

thanks a lot. but how can i get the comments back? "add comment" function is more important than trackback for me. can i just export the whole website to iDisk and then synchronize?

OS X Lion and my Cisco router don't work together. What router can I use that supports OS X Lion?, OS X Lion and my Cisco router don't work together. What router can I use that supports OS X Lion?

I recently upgraded to Lion. I reset my Cisco E3000 wireless router because my iPads kept dropping. Now nothing! My network no longer shows up. I attempted to reinstall but when I inserted the CD it said Cisco Connect does not support my version of OS X. Should I try a new wireless router or get a traditional wired router until a new version of OS X comes out that has fixed this issue?

Contact Cisco tech support. They may have a solution for you or can let you know if the router is fully compatible or not.
As for a replacement consider the Airport Extreme Base Station.

Downloading 9iDB and 9i Developer Suite....Need Advice Please.

Hi "The Helping folks",
Currently I have Oracle 8iDB and 6i Developer Suite installed on my PC. I want to upgrade it to 9i both DB and Dev. Suite. Since I am novice to 9i version, is there anyone who can guide me of the ups and downs in this case by answering the following questions or if more issues, which I don't have any clue of:
1. Should I download 9i Database or 9i Application Server....I am not sure about which one.
2. How much time does it take normally on AOL internet servers to download 9iDB and 9i DEV?
3. Do they call it 9i JDeveloper as we call it 6i Developer in lower version or it has some different name?
4. Are there any complicated issues or special instructions to be kept in mind while upgrading from 8iDB to
9iDB and 6i Dev. to 9i Dev.?
If there are any special notes or guidelines other these, also please mentioned them. I'll be much much thankful for your help in this regard.
Thanks
Zahir

- The 9i database contains the client & server database components. 9iAS is the 9i application server. You probably want the former, not the latter.
- The 9i database download is somewhere in the neighborhood of 1 Gb. Unless you have broadband, you're probably much better off going to store.oracle.com and plunking down $40 for the CDs.
- JDeveloper 9i is the followup product to JDeveloper 6.
Justin

Oracle Identity and Access Management Suite Plus Integration with Oracle ADF

Hi All,
Kindly advice if Oracle Identity and Access Management Suite Plus can be integrated with Oracle ADF based applications to manage the end-to-end lifecycle of user accounts specifically addressing to roles/priviledges and security.
Request you to share links to documentation where I can study the steps to integrate both the frameworks.
Looking forward to hear from you soon.
Best Regards,
Ankit Gupta

Hi Sébastien,
I came across the below link for the required integrations -
Oracle&reg; Fusion Middleware Installation Guide for Oracle Identity and Access Management 11g Release 2 (11.1.2) - …
Oracle&reg; Fusion Middleware Enterprise Deployment Guide for Oracle Identity Management 11g Release 2 (11.1.2) - Co…
Best Regards,
Ankit Gupta

Installing Oracle Database and SQL Developer

Hi, I was looking for some help/advice in regards to installing an Oracle Database and SQL Developer onto a Windows 7 32bit machine. I have been asked to create a database to store data that I create through reports in Excel so I am required to create a local database but not sure how to go about doing this. Also not sure if I install the Express Edition or Oracle Database 11g R2. If somebody could please advise on how I can get this started or even any links/tutorials that would guide me in how to get this installed with a localhost.
Thanks in advanc.

318f20b8-a3d0-4fb4-bb0f-73785250b7d4 wrote:
Thanks guys, I have managed to install Oracle 11gR2 and I have setup a database using the dbca tool and I can connect to my new database. One thing that I have noticed is that when i look into my tables in sql developer i see loads of different tables i.e. def$_, logmnr_, etc and I am not sure why this is as I expected an empty tablespace.
Thanks btw for all your help.
One of the key principles of relational databases is that they use their own facilities to manage themselves. That means the database management system uses the database to manage data about the database using exactly the same facilities (tablespaces, tables, user accounts, procedures, etc) that an application uses to keep data for the application. See "data dictionary" So there is no such thing as a completely empty database.
As said by others, you do NOT want to be creating your own tables under oracle's schemas (users) or in oracle's own tablespaces (esp. SYSTEM and SYSAUX). Create your own user account/schema. Create your own tablespace. Make that tablespace the default for that user.

Does oracle 10g also has developer suite?

Hi,
I have a small doubt regarding release ....
does oracle 10g also has developer suite?

Yes 10g has a developer suite.
you can download it from
http://www.oracle.com/technology/software/products/ids/index.html

HT201412 My i Pad 3 shows "cannot Access Find My Friends open the app and review your sign in information to continue sharing your location. And I have two buttons : Later and Open but they don't work, As long as I have this situation I can do nothing on

My i Pad 3 shows "cannot Access Find My Friends open the app and review your sign in information to continue sharing your location. And I have two buttons : Later and Open but they don't work. As long as I have this screen situation, I cann't do anything on my I Pad. Please help !!

I have the same problem on my iPhone4. It is obviously a bug in the software. Once it pops out I am locked out of my phone. I can't even begin to describe the frustration this causes. All that stuff about holding down the buttons is useless. the phone won't even shut off. I can take a screen shot like that or go to voice control. Even when I got to a wifi connection, I can't get on. This app blocks everything else. This is a serious bug and can have serious consequences. The only thing my phone would do is go to voice control and let me play iTunes or phone people. Some smart phone hey?
I have finally got to a place with a wide enough wifi to connect my computer and restore the phone. This has lasted over a day!
I don't even know why Find My Friends is on my phone. Is it part of the package and how do I turn it off?

I forgot my Apple ID password and I can't reset it because my email account has been closed and the security questions don't work

I Forgot my Apple ID password and I can't reset it because the related email account has been closed and the security questions don't work! How do I solve this? Thank you.

Click here and contact Apple.
(113292)

I updated to the latest IOS and now my passwords don't work. Reset 4 time which reset for my iPad and iPhone but I cant log into my itunes account using my apple ID it indicates an error, Help?

I updated to the latest IOS and now my passwords don't work. Reset 4 time which reset for my iPad and iPhone but I cant log into my itunes account using my apple ID it indicates an error, Help?

This may sound crazy, but download any free app. This often "shocks" the other apps into working.

What should I do on GMAIL LOADING and the buttons that don't work on Firefox 4?

The Write e-mail, reply, reply all and config GMAIL buttons DON'T WORK AT ALL in MZ Firefox 4. In Explorer 9 works fine. Shat shoud I do? And ABOUT:CONFIG dom.storage don't fix the problem

Data Recovery – Best
Data Recovery – Disk Drill
Data Recovery – Data Rescue
Data Recovery – File Salvage
Data Recovery – Stellar Phoenix
Data Recovery - uFlysoft
Data Recovery – Best
Data Recovery – Disk Drill
Data Recovery – Data Rescue
Data Recovery – File Salvage
Data Recovery – Stellar Phoenix
Data Recovery - uFlysoft

ADDT Datepicker and spry validation don't work together

Datepicker and spry validation don't work together
the problem is in: /includes/wdg/classes/MXWidgets.js
(necessary to datepicker)
Does anyone have a solution??
Thanks

Hi Gabriele,
technically speaking, ADDT and the Spry framework have about nothing in common, and you´re going to stumble across many compatibility-related issues when trying to use them together.
Does anyone have a solution??
any regular user who´d like to provide a solution to this, would have to be a pretty skilled programmer and would have to know the "technical details" of both ADDT and SPRY very well to be of help -- I don´t think that you´ll find many folks here who are capable to do that.
However, why not making the date field required in ADDT ?
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

My screen freezes up more often and the keyboard shortcuts don't work. I have to manually shut it down. what can I do about it?

My screen freezes up more often and the keyboard shortcuts don't work. I have to manually shut it down. What can I do about it? It's a pain when I'm in teh middle of doing something or chatting in MSN Messenger.

The problem is no Frre Ram. (green slice), Use Disk utility to REpair Permissins & see if the Ble turms to green.
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

Oracle 9i and 9i Developer Suite don't work together

Similar Messages

Maybe you are looking for