Oracle 9i and Windows XP home version

Is it possible to install Oracle 9i on Windows XP home version? I have heard that the O/S has to be Windows XP PROFESSIONAL version. Is this true?

I installed oracle 10g on my XP Home and it works great. I can even config the net manager connect from my another XP Pro to this XP Home oracle 10g.

Similar Messages

Oracle 10g and Windows XP home version

hello,
I have a problem downloading Oracle 10g on my labtop...
it is always giving me an error saying:
Error in writting to directory c:\Docum~1\Locals~\Temp\OraInstall2005-02-26. Please ensure that this directory is writable and has atleast 45MB of disk space.
...is there any hope that i may have Oracle 10g on my laptop...or not ;(

easy just use Virtual machine.
goto get it free 8i,9i,10g all pre-configured
network ready.
http://www.uittraining.com
Wonder what Oracle is going think about you distributing their software in manner that does not adhere to the license?

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Unistall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Uninstall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

I had gotten a similar problem, except with "provider services", i believe, but i solved it by copying sqlite3.dll from E:\Program Files\Common Files\Apple\Apple Application Support to E:\Program Files\Common Files\Apple\Mobile Device Support. doing that solved my first problem, but now i have been getting the error described in this topic (unable to load dataclass info... etc.). i tried reinstalling itunes (i already had 9.1.1, and thats what i reinstalled) by using the method described on apples site (using the "remove programs" tool in the control panel) and then downloading and installing itunes. when i opened it again, i still got the same error, and just now i got an error saying "the instruction at "0x00aadb6b" referenced memory at "0x00000008". the memory could not be read" it gave me the option to cancel and debug, or to press ok and terminate the program. I tried pressing cancel, and the popup went away but nothing else happened. a minute later the popup was back, so i pressed ok and itunes quit. Upon opening Itunes again, i got the very same error. sorry for the long post, but its really been bugging me. thanks for any help you might give, and if you need anymore info, feel free to contact me.

Windows Vista Home Version and Adobe Flash Player 10.

I use Windows Vista Home Version and I am finding it difficult to download Adobe Flash Player 10.
It appears to have been downloaded but on examining Control Panel, I discovered that its content is empty (no size is aportioned to it).
Most importantly, I am unable to play videos that require adobe flash player.

I understand Vista is a 32 bit.
IE 8 is what I have but I would consider IE 9 if that would be necessary.
Just a bit more update. I just tried to download Adobe FP 10 again with the following results, again:
The Adobe Download Manager windows shows:
FP 10.3 Status as 100% "Installation Pending".
FP 10.2 Status as 100% " Instatlling Application"
and that will go one forever but never really actually installs anything and just keeps cycling through the "Add to Download" e.g. "Fanbase", "Times Reader"
and "Adobe Air" (none of which I want added to the download), and the download and installation shows as 100%.
Go figure!

Personal Oracle and Windows XP Home Edition

Has anyone gotten any version of Personal Oracle
to run on Windows XP Home edition?
How?
I have Personal Oracle 8.1.7 for Win 98 running on
Windows Me, but now I need Personal Oracle running
on Windows XP Home edition.

I was told by Oracle Sales that XP home is not supported, just XP Pro

Install Oracle 9i on Windows Vista Home Premium

I have a problem Installing Oracle 9i on Windows Vista Home Premium, I cant install it because it throws me an error message saying that is incompatible with my version of Windows. It is possible to install it with some patch or something??
Message was edited by:
user599646

The only patch I know of is called Windows XP.
In case you have not done any internet searches on this, even Oracle Database 10g was not compatible with Vista until Oracle applied some heavy patches and re-released it.
And since Oracle9i is officially deprecated (nearest thing to obsolete as to make no difference) I see no reason for Oracle to backport the patches.

TNS 12549 error on installing Oracle 10g on Windows XP Home?

Hi,
I installed Oracle 10g on Windows XP Home by clicking on Disk1\install\setup (NOT Disk1\setup as instructed since that did not work). Everything seemed to go fine except towards the end of the install I got a whole bunch of errors saying that "operating system resource quota exceeded". There were options to Ignore or Abort at most of these stages. I chose Ignore and the whole install seemed to complete but I am not able to connect to the database using sqlPlus. I looked at the log files created where I saw a whole bunch of errors in several files. For example in sqlnet log, I saw this error (among others) appeneded below. It seems obvious that some resource quotas were exceeded but I am not able to figure out exactly what quotas should be increased. Any help regarding this would be greatly appreciated.
Thanks.
Sudip
===================================================
Fatal NI connect error 12549, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleorcl)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=orcl)(CID=(PROGRAM=C:\oracle\product\10.1.0\db_1\bin\sqlplus.exe)(HOST=CHAKRABORTY-04)(USER=Owner))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.1.0.2.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.1.0.2.0 - Production
Time: 13-MAR-2005 18:03:25
Tracing not turned on.
Tns error struct:
ns main err code: 12549
TNS-12549: TNS:operating system resource quota exceeded
ns secondary err code: 12560
nt main err code: 519
TNS-00519: Operating system resource quota exceeded
nt secondary err code: 8
nt OS err code: 0
===================================================

XP Home is not supported, despite of this some people get oracle to work.
But in your case, possibly your machine has simply not enough resources, 12549 is a very generic error. Check the hardware requirements in the installation guide.

Oracle 9i for Windows XP Home Edition

Would like to know which version can be downloaded to install oracle 9i for Windows XP Home Edition .. Would like to download Oracle 9i Developer as well...

I can only comment on the database installation. Oracle has now supported 9i for XP professional (no previous versions will be supported). XP home will NOT be a supported platform for Oracle products.
NOTE: There is a bug with 9i installations that the OUI will fail if the CLASSPATH has been set by installations from previous Oracle installations. Before installing 9i you will need to clear the CLASSPATH and then proceed with your installation. Once the installation is complete you can restore the CLASSPATH with your original settings.
Regards Raf

Time capsule 4th gen firmware 7.6.1 and Windows 7 Home Premium

Hi I have a Time capsule 4th gen firmware 7.6.1 and Windows 7 Home Premium and every time I try to copy a large file from the TC to my Windows 7 laptop the TC crashes. The time capsule disk dissapears from the network and the wireless is still on but with limited connectivity for everyone including the macs connected to the same network. On the contrary, I can copy any files to the TC. No problem. I've tried all the suggestions. Lmcompatibilitylevel 1, disable 128-bit encryption, and disabled windows search. No luck! Any other suggestions?

My previous reply: red herring. The problem didn't occur again right away, but eventually it did. Completely repeatable: start copying a 100GB file off the Time Capsue to the ThinkPad, and the entire wi-fi network goes down; nothing to do but pull the plug on the TC and restart it.
I have tried several different versions of the Intel wi-fi driver under Windows 7 and 8 -- same problem in all cases.
At least one other thread describing these same symptoms points to the firmware as the culprit (https://discussions.apple.com/thread/3582780?start=0&tstart=0). I have just downgraded the TC firmware from 7.6.1 to 7.5.2 as suggested; so far so good.

Photoshop CS5 and Windows 7 Home Premium?

Functioning new PC/Windows 7 software in question:
HP Pavillion Elite HPE-171f Desktop Intel Core i7-860 Processor
6GB DDR3 Memory - 1TB Hard Drive
NVIDIA GeForce GTX 260 with 1.8GB Dedicated Graphic Memory
Genuine Windows 7 Home Premium 64-bit
Question - for recent CS5 users/experts using similar hardware/software listed above:
Soon to purchase Photoshop CS5 full package (discs). Will it install and run well on Windows 7 Home Premium and an i7-860 processor?
I am reading far too many negative comments regarding Photoshop CS5 installation but it seems that they are mainly due to type of system and Windows version etc. Is the above system and Windows 7 Home Premium compatible enough for this software?
Hoping to hear from experts or those who have a similar system as above.
Thank you. Much appreciated.

This link of Minimum system requirement can help you out: http://www.adobe.com/products/photoshop/photoshopextended/systemreqs/
Zeno Bokor wrote:
You're reading only negative comments regarding the installation procedure because you're on a support forum. People don't come here to say that everything is working as it should
@ Zeno : Well said , Adobe should keep reward for Users who come and tell how good their install went

Can I run a windows software program taht is on a CD on my macbook pro after I install bootcamp and windows xp home?

Can I run a windows software program that is on a CD on my macbook pro after I install bootcamp and windows xp home?

genepaquin,
the last MacBook Pros that supported installing Windows XP in a Boot Camp partition are the Mid 2010 models. If your MacBook Pro is newer than that, and you don’t have a newer version of Windows to install into a Boot Camp partition on your MacBook Pro, then you might consider an alternative such as running Windows with the help of programs such as VirtualBox or Parallels Desktop rather than through Boot Camp.

Problems : Oracle 9iAS Installation Windows XP Home Edition

Hi All,
I just installed Oracle 9iAS on Windows XP Home Edition.
Can anyone give me some idea how to resove the issues with the installation.
Infrastructure Database Registration Assistance - Canceled
Please provide either oidpassword or obfuscated password
Usage: java oracle.ias.ldaporacfg.LdaporaCfg Parameters
Parameters are -o OracleHome -h oidHost -p oidPort -u oidUser -w oidPassword -d obfPassword
Infrastructure Schema Configuration Assistant - Failed
Some of the Config Tools failed. See the log file useinfratool.log for more details.
1) Infrastructure Instance Configuration Assistant - Failed
Some of the Config Tools failed. See the log file useinfratool.log for more details.
2) Oracle 9i Application Server randomize password - Failed
java.lang.NumberFormatException: %OIDport%
3) Single Sign-on Configuration Assistant - Failed
Parameters passed to ssoca : param0:C:\oracle\as param1:orasso param2:***** param3:aurigadatamart.pacbell.net param4:389 param5:cn=orcladmin param6:***** param7:aurigadatamart.pacbell.net param8:1521 param9:mat param10:AMERICAN_AMERICA.WE8MSWIN1252
Failed to obtain OiD password. Exception is :java.lang.Exception: Version mismatch!
Thanks in advance for your kind help!!
Ramesh

XP is not a supported platform. Please try Win2K or NT.
See certification matrix:
http://otn.oracle.com/software/products/ias/files/20_certification.html
Hope this helps,
Ashesh Parekh
Oracle9iAS Product Management

Installation of oracle 10gR2 on Windows Vista Home Premium 64 bit OS

can we install oracle 10gR2 on Windows Vista Home Premium 64 bit OS ???
While doing sqlplus from command prompt,
it's giving error like
'SP2-1503 Unable to initialise Oracle Call interface'
'SP2-0152 Oracle may not be functioning Properly'
How to troubleshoot the above errors,
Has anybody tried it ???
Plz assist.

No Oracle product is certified against any Windows Home OS.
As Vista was released after Oracle 10gR2, 10gR2 is not certified against any edition of Vista.
You need to downgrade to XP, or install Linux.
Sybrand Bakker
Senior Oracle DBA

I have iPhone4 and Windows 7 Home Premium. My iphone can't backup: message 'couldn't backup because the iphone disconnected'. It started when i wanted to update to iphone3,1_5.0_9A334_restore.ipsw and I received a 3002 error. Exhausted trying everything

I have iPhone4 and Windows 7 Home Premium. iPhone can't backup: message 'couldn't backup because the iphone disconnected'. It started when i wanted to update to iphone3,1_5.0_9A334_Restore.ipsw and I received a 3002 error. Sync seems to work OK. Have exhausted the online discussions and tried everything. Please help

Try runing iTunes in admin mode. That fixed the issue for me. You can either right click on the shortcut on your desktop and choose to run as an admin each time you launch it or go to the advanced tab under security on the program itself and click the run as admin every time.

External table in Oracle 10g and Windows server 2003 problem

I'm having a problem accessing an external table in an Oracle 10g and Windows 2003 server environment. The disk is remote (mapped) to the server. It's the usual access errors, kup-04001 or kup-04063.
I have the [seemingly] exact same setup in an Oracle 9i and Windows 2000 server environment which works perfectly. Services run as local SYSTEM and SYSTEM has full permissions on the disk. Directories exist and so do the permissions to the directories.
In the Oracle 10g and Windows 2003 environment, services run as local SYSTEM and SYSTEM has full permissions on the mapped disk. Directories exist and so do the permissions to the directories.
This obviously effects mappings, deployments, etc.
Does anyone know if something changed in either the db or the os?
Thank you,
Michael

Thank you for your reply.
Your proposal is the standard solution. As a matter of fact, that's how it is on my "old" system. Server "A" Oracle services are started by SYSTEM. Server "B" Oracle services are started by SYSTEM and is where the flat files reside. SYSTEM has full permissions on a disk local to Server "B". Database directoriies defined on Server "A" point to Server "B" remote disk. External Tables on Server "A" are defined with directories that point to Server "B" remote (mapped) disk. I have no problems with this configuration.
I'm having a problem acheiving the same configuration with Oracle 10g and Windows 2003. I guess I'm baffled over the fact it isn't working the same way as my "old" environment. Why shouldn't it? Oracle (and you) want me to start services as a specific user. It shouldn't have to be that way unless something changed in the way the database makes calls to the os or if Microsoft slipped something in with one of it's numerous security patches.

Oracle 9i and Windows XP home version

Similar Messages

Maybe you are looking for