Oracle 9i AS Configuration

Hi all,
I had installed the Oracle 9i Infrastructure and Application server successfully on Win2000. Tested the services and demo forms. I Need to know post installation configuration details and steps on how to deploy the forms and reports into it. Thankful if you can provide some help on this.
regards,
Sampath

Firstly, post technical questions at
http://forums.oracle.com/forums/index.jsp?cat=9
Now coming to your question, I hope this link will help you
http://otn.oracle.com/docs/products/ias/doc_library/1022doc_otn/apps.102/a86202/toc.htm
http://otn.oracle.com/docs/products/ias/doc_library/1022doc_otn/busint.102/a86784/toc.htm
Regards,
Anupama

Similar Messages

Oracle OSB 11G. Unable to find Oracle Service Bus Configuration Page.

Hi All,
Sorry for the apparent silly question but I am studying and learning the product.
I have the OSB 11G installed and running with a proxy service working and routing requests. The Oracle ESB documentation http://download.oracle.com/docs/cd/E21764_01/doc.1111/e15866/ui_ref.htm#i1327746 at chapter 4.4.2 New Oracle Service Bus Configuration Project Wizard
Use this wizard to create an Oracle Service Bus configuration project. For configuration options, see Section 4.4.3, "Oracle Service Bus Configuration Page."
4.4.3 Oracle Service Bus Configuration Page.
I don't see the configuration page in anywhere in the left pane of the console. Am I missing something? The project creation works fine but I just don't see the configuration Wizard.
Thanks.
Regards
Salvatore Ilardo

The link which you are referring is for user interface objects in the Oracle Service Bus plug-ins and OSB plug-ins are used with OEPE (Oracle Enterprise Pack for Ecplise) for OSB development. OEPE is the only supported IDE for OSB development as of now.
Remember, at a time, one and only one Oracle Service Bus Configuration project can be deployed in a OSB domain which may contain desired number of Oracle Service Bus Projects and that's why there is no provision of creating Oracle Service Bus Configuration Project in sbconsole GUI. In IDE, you may create many Oracle Service Bus Configuration Project and that's why it has a Oracle Service Bus Configuration Project Wizard.
Regards,
Anuj

Oracle 9i database configuration assisstant not running

Hi All,
My database is Oracle 9i.The configuration assisstant not running in this .can any body help?
Reena

Hi Reena, this got lost in the wrong forum. try the database forum
Barry

Help on Oracle streams 11g configuration

Hi Streams experts
Can you please validate the following creation process steps ?
What is need to have streams doing is a one way replication of the AR
schema from a database to another database. Both DML and DDL shall do
the replication of the data.
Help on Oracle streams 11g configuration. I would also need your help
on the maintenance steps, controls and procedures
2 databases
1 src as source database
1 dst as destination database
replication type 1 way of the entire schema FaeterBR
Step 1. Set all databases in archivelog mode.
Step 2. Change initialization parameters for Streams. The Streams pool
size and NLS_DATE_FORMAT require a restart of the instance.
SQL> alter system set global_names=true scope=both;
SQL> alter system set undo_retention=3600 scope=both;
SQL> alter system set job_queue_processes=4 scope=both;
SQL> alter system set streams_pool_size= 20m scope=spfile;
SQL> alter system set NLS_DATE_FORMAT=
'YYYY-MM-DD HH24:MI:SS' scope=spfile;
SQL> shutdown immediate;
SQL> startup
Step 3. Create Streams administrators on the src and dst databases,
and grant required roles and privileges. Create default tablespaces so
that they are not using SYSTEM.
---at the src
SQL> create tablespace streamsdm datafile
'/u01/product/oracle/oradata/orcl/strepadm01.dbf' size 100m;
---at the replica:
SQL> create tablespace streamsdm datafile
---at both sites:
'/u02/oracle/oradata/str10/strepadm01.dbf' size 100m;
SQL> create user streams_adm
identified by streams_adm
default tablespace strepadm01
temporary tablespace temp;
SQL> grant connect, resource, dba, aq_administrator_role to
streams_adm;
SQL> BEGIN
DBMS_STREAMS_AUTH.GRANT_ADMIN_PRIVILEGE (
grantee => 'streams_adm',
grant_privileges => true);
END;
Step 4. Configure the tnsnames.ora at each site so that a connection
can be made to the other database.
Step 5. With the tnsnames.ora squared away, create a database link for
the streams_adm user at both SRC and DST. With the init parameter
global_name set to True, the db_link name must be the same as the
global_name of the database you are connecting to. Use a SELECT from
the table global_name at each site to determine the global name.
SQL> select * from global_name;
SQL> connect streams_adm/streams_adm@SRC
SQL> create database link DST
connect to streams_adm identified by streams_adm
using 'DST';
SQL> select sysdate from dual@DST;
SLQ> connect streams_adm/streams_adm@DST
SQL> create database link SRC
connect to stream_admin identified by streams_adm
using 'SRC';
SQL> select sysdate from dual@SRC;
Step 6. Control what schema shall be replicated
FaeterBR is the schema to be replicated
Step 7. Add supplemental logging to the FaeterBR schema on all the
tables?
SQL> Alter table FaeterBR.tb1 add supplemental log data
(ALL) columns;
SQL> alter table FaeterBR.tb2 add supplemental log data
(ALL) columns;
etc...
Step 8. Create Streams queues at the primary and replica database.
---at SRC (primary):
SQL> connect stream_admin/stream_admin@ORCL
SQL> BEGIN
DBMS_STREAMS_ADM.SET_UP_QUEUE(
queue_table => 'streams_adm.FaeterBR_src_queue_table',
queue_name => 'streams_adm.FaeterBR_src__queue');
END;
---At DST (replica):
SQL> connect stream_admin/stream_admin@STR10
SQL> BEGIN
DBMS_STREAMS_ADM.SET_UP_QUEUE(
queue_table => 'stream_admin.FaeterBR_dst_queue_table',
queue_name => 'stream_admin.FaeterBR_dst_queue');
END;
Step 9. Create the capture process on the source database (SRC).
SQL> BEGIN
DBMS_STREAMS_ADM.ADD_SCHEMA_RULES(
schema_name =>'FaeterBR',
streams_type =>'capture',
streams_name =>'FaeterBR_src_capture',
queue_name =>'FaeterBR_src_queue',
include_dml =>true,
include_ddl =>true,
include_tagged_lcr =>false,
source_database => NULL,
inclusion_rule => true);
END;
Step 10. Instantiate the FaeterBR schema at DST. by doing export
import : Can I use now datapump to do that ?
---AT SRC:
exp system/superman file=FaeterBR.dmp log=FaeterBR.log
object_consistent=y owner=FaeterBR
---AT DST:
---Create FaeterBR tablespaces and user:
create tablespace FaeterBR_datafile
'/u02/oracle/oradata/str10/FaeterBR_01.dbf' size 100G;
create tablespace ws_app_idx datafile
'/u02/oracle/oradata/str10/FaeterBR_01.dbf' size 100G;
create user FaeterBR identified by FaeterBR_
default tablespace FaeterBR_
temporary tablespace temp;
grant connect, resource to FaeterBR;
imp system/123db file=FaeterBR_.dmp log=FaeterBR.log fromuser=FaeterBR
touser=FaeterBR streams_instantiation=y
Step 11. Create a propagation job at the source database (SRC).
SQL> BEGIN
DBMS_STREAMS_ADM.ADD_SCHEMA_PROPAGATION_RULES(
schema_name =>'FaeterBR',
streams_name =>'FaeterBR_src_propagation',
source_queue_name =>'stream_admin.FaeterBR_src_queue',
destination_queue_name=>'stream_admin.FaeterBR_dst_queue@dst',
include_dml =>true,
include_ddl =>true,
include_tagged_lcr =>false,
source_database =>'SRC',
inclusion_rule =>true);
END;
Step 12. Create an apply process at the destination database (DST).
SQL> BEGIN
DBMS_STREAMS_ADM.ADD_SCHEMA_RULES(
schema_name =>'FaeterBR',
streams_type =>'apply',
streams_name =>'FaeterBR_Dst_apply',
queue_name =>'FaeterBR_dst_queue',
include_dml =>true,
include_ddl =>true,
include_tagged_lcr =>false,
source_database =>'SRC',
inclusion_rule =>true);
END;
Step 13. Create substitution key columns for äll the tables that
haven't a primary key of the FaeterBR schema on DST
The column combination must provide a unique value for Streams.
SQL> BEGIN
DBMS_APPLY_ADM.SET_KEY_COLUMNS(
object_name =>'FaeterBR.tb2',
column_list =>'id1,names,toys,vendor');
END;
Step 14. Configure conflict resolution at the replication db (DST).
Any easier method applicable the schema?
DECLARE
cols DBMS_UTILITY.NAME_ARRAY;
BEGIN
cols(1) := 'id';
cols(2) := 'names';
cols(3) := 'toys';
cols(4) := 'vendor';
DBMS_APPLY_ADM.SET_UPDATE_CONFLICT_HANDLER(
object_name =>'FaeterBR.tb2',
method_name =>'OVERWRITE',
resolution_column=>'FaeterBR',
column_list =>cols);
END;
Step 15. Enable the capture process on the source database (SRC).
BEGIN
DBMS_CAPTURE_ADM.START_CAPTURE(
capture_name => 'FaeterBR_src_capture');
END;
Step 16. Enable the apply process on the replication database (DST).
BEGIN
DBMS_APPLY_ADM.START_APPLY(
apply_name => 'FaeterBR_DST_apply');
END;
Step 17. Test streams propagation of rows from source (src) to
replication (DST).
AT ORCL:
insert into FaeterBR.tb2 values (
31000, 'BAMSE', 'DR', 'DR Lejetoej');
AT STR10:
connect FaeterBR/FaeterBR
select * from FaeterBR.tb2 where vendor= 'DR Lejetoej';
Any other test that can be made?

Check the metalink doc 301431.1 and validate
How To Setup One-Way SCHEMA Level Streams Replication [ID 301431.1]
Oracle Server Enterprise Edition - Version: 10.1.0.2 to 11.1.0.6
Cheers.

Issue - Oracle Business Indicators configuration in iPhone

Hi Everyone,
I am having an issue with Oracle Business Indicators configuration in iPhone. I have provided the IP address and username and pwd but I am getting the below error. Do I need to make any configuration or setup at our BI servier level?
The network operation encountered an error for the activity 'creation of an OBIEE session'.
Underlying Error Details:
unsupported URL
The URL that caused the error: 10.20.30.40/saw.dll?SoapImpl=nQSessionService
Underlying Error Details:
unsupported URL
The URL that caused the error: 10.20.30.40/saw.dll?SoapImpl=nQSessionService
Thanks in advance
G

You're getting the 500 Server Error because sawserver (presentation services) is crashing, as you say.
For background info see here: http://rnm1978.wordpress.com/2009/12/09/troubleshooting-presentation-services-analytics-connectivity/
You should check your sawserver.log file in $OracleBIData/log as this should record why sawserver is failing.
If it doesn't you could [increase the logging level of sawserver|http://rnm1978.wordpress.com/2009/07/23/sawserver-logging-configuration-logconfig-xml/] to examine what it's doing before crashing, and or you will have to raise a support request (SR) with Oracle.

Oracle Calendar Server Configuration Assistant fails with Red Hat ES 4

I am trying to install Oracle Collaboration Suite 10.1.2 on a Red Hat ES 4 server platform.
I have installed with the Advanced Installation Option. The infra installation proceeds well then when i try to install the ocs application tier (different Oracle Home) the Calendar Server Configuration Assistant fail.
Output :
================================================================================================================
Output generated from configuration assistant "Calendar Server Configuration Assistant" (attempt 1):
Time zone selected: EBST3EBDT.Warning: Existing node(s) found in unison.ini. Using node 1 for configuration tasks.
Current State for Instance:ocsapp.lf-ocs1.lima_e_falcao.inet
Component Type Up Status In Sync Status
================================================================================
1 HTTP_Server HTTP_Server Up True
2 OC4J_Content OC4J Up True
3 OC4J_Mail OC4J Up True
4 OC4J_OCSADMIN OC4J Up True
5 OC4J_OCSClient OC4J Up True
6 OC4J_Portal OC4J Up True
7 OC4J_RM OC4J Down True(Disabled)
8 OC4J_Wireless OC4J Up True
9 OC4J_imeeting OC4J Up True
10 Service_Component_Cont OC4J Up True
11 home OC4J Up True
Warning: more than one process-type Element in the snippet. only the 1st one is appended
Error: can not append, there is a same named process type element in the exisitng ias-instance.ias-component
Error: Could not configure OPMN module information.
java.io.IOException: /u01/oracle/product/10.1.2/ocs_2/jdk/bin/java returned 1
     at oracle.calendar.server.configuration.OCalConfig.runExternalProgram(Unknown Source)
     at oracle.calendar.server.configuration.OCalConfig.runExternalProgram(Unknown Source)
     at oracle.calendar.server.configuration.OCalConfig.configureOPMN(Unknown Source)
     at oracle.calendar.server.configuration.OCalConfig.run(Unknown Source)
     at oracle.calendar.server.configuration.OCalConfig.main(Unknown Source)
3 [main] ERROR emSDK.config - oracle.sysman.emSDK.conf.TargetAdditionException: Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
oracle.sysman.emSDK.conf.TargetAdditionException: Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
     at oracle.sysman.emSDK.conf.TargetInstaller.addTargetInt(TargetInstaller.java:1148)
     at oracle.sysman.emSDK.conf.TargetInstaller.addTargetFromFile(TargetInstaller.java:1075)
     at oracle.sysman.emSDK.conf.TargetInstaller.main(TargetInstaller.java:3669)
Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
Warning: ocad.conf already included in /u01/oracle/product/10.1.2/ocs_2/Apache/Apache/conf/oracle_apache.conf.
Error: java.io.IOException: /u01/oracle/product/10.1.2/ocs_2/jdk/bin/java returned 1: Registration of ocal_targets.xml into targets.xml failed.unistart: Oracle Calendar Server 10.1.2.0.0
unistart: Copyright (c) 1993, 2005, Oracle.
unistart: All rights reserved.
unistart:
unistart: opmnctl: opmn is already running
unistart: opmnctl: starting opmn managed processes...
unistart: The Calendar Server started successfully.
Orclguest account has already been provisioned for Calendar.
Fatal Exception caught : java.lang.NullPointerExceptionopmnctl: stopping opmn managed processes...
Configuration assistant "Calendar Server Configuration Assistant" failed
================================================================================================================
Someone can help me?
Thanks a lot.

is it a reinstallation or a first one on a bare server ? if there were several attempts please be sure you cleaned evrything before launching the installation :
- product directory
- /etc/ora*
- database
- oraInventory
- /tmp (I had a similar issue with remaining files in /tmp, even after rebooting)
If it doesn't work, check that you don't hit the NO-EXCUTE problem (see the OCS 10.1.2 release notes, look for "noexec")

INS-20802 Oracle Private Interconnect Configuration Assistant failed

Thought I would post what information I've gathered, after facing this error during install of RAC Grid Infrastructure 11.2.0.1 on Red Hat Enterprise Linux Server release 5.5 64-bit, as Oracle Support is once again unable to help. Maybe this will save someone else some time and the aggravation of dealing with lousy Oracle Support.
The error occurs after root.sh has successfully completed on all nodes. Oracle Net Configuration Assistant runs successfully, then Oracle Private Interconnect Configuration Assistant launches and subsequently fails with the following.
[INS-20802] Oracle Private Interconnect Configuration Assistant failed.
/u01/app/oraInventory/logs/installActions2010-12-13_01-26-10PM.log
INFO: Starting 'Oracle Private Interconnect Configuration Assistant'
INFO: Starting 'Oracle Private Interconnect Configuration Assistant'
INFO: PRIF-26: Error in update the profiles in the cluster
INFO:
WARNING:
INFO: Completed Plugin named: Oracle Private Interconnect Configuration Assistant
INFO: Oracle Private Interconnect Configuration Assistant failed.
INFO: Oracle Private Interconnect Configuration Assistant failed.
I was able to find another error that coincides with the PRIF-26 error: "CRS-2324:Error(s) occurred while trying to push GPnP profile. State may be inconsistent."
I was also able to duplicate the PRIF-26 error by trying to add a non-existent network interface via oifcfg:
./oifcfg setif -global jjj1/192.167.1.0:cluster_interconnect
PRIF-26: Error in update the profiles in the cluster
My best guess is the Oracle Private Interconnect Configuration Assistant makes a call to oifcfg. When oifcfg makes an update or adds a public/private interface, some XML files are also updated or maybe cross-referenced. These files are located here: <grid_home>/gpnp/<host>/profiles/peer
Any updates/changes/addtions to the private or public interfaces include changes for the Grid Plug-n-Play component, which uses the XML files. If the interface name is not contained in the XML files, my best guess is that triggers the "CRS-2324:Error(s) occurred while trying to push GPnP profile. State may be inconsistent.
I verified everything was configured correctly; the cluster verification utility reported everything was ok. I also ran the cluster verifcation utility against the GP-nP:
./cluvfy comp gpnp -verbose
I also reviewed the public and private interfaces via oifcfg and they are correct:
[oracle@ryoradb1 bin]$ ./oifcfg getif -global
eth0 10.10.2.0 global public
eth1 192.167.1.0 global cluster_interconnect
[oracle@ryoradb1 bin]$ ./oifcfg iflist -p
eth0 10.10.2.0 PRIVATE
eth1 192.167.1.0 UNKNOWN
My conclusion is the environment is configured correctly, in spite of the error generated by the Oracle Private Configuration Assistant.

I understand that you have installed 11.2.0.1 not 11.2.0.2 because multicating must be enabled if you have installed 11.2.0.2 and you may face these sort of problems because cluster nodes would not be able to communicate with each other.
Please check ocssd.log especially on the first node because this file will give more inforamtion as to why first node is not able to push GPnP file. As you have executed cluvfy to confirm the GPnP but to confirm whether GPnP profile is accurate to just narrow down the problem, I would suggest you to try to start cluster in exclusive mode so that you can sure that GPnP profile is good.
Shutdown CRS on all nodes, if there is any hung processes then kill them before executing the fllowing command to start cluster in exclusive mode.
$GRID_HOME/bin/crsctl start crs -excl
If you are able to start cluster in exclusive then it is sure that GPnP is correct and then next step would be to verify the private network.
See how you goes.
FYI, I was recently analyzing the same sort of problems where cluster was not able to access GPnP profile and finally I found issues on my private network. Customer had enabled IGMP snooping, which was avoiding multicast communication over the private network but it was 11.2.0.2, which is not the case here.
Harish Kumar
http://www.oraxperts.com

Security problem in oracle 9i Database Configuration Assistant

Inside the tool Oracle 9i Database Configuration Assistant there is an option by which you can make a "copy" of your Database. This "copy" is called a template and you don4t need any password or aunthentication to do it, you just need the tool to be installed in your server. Once you have a template, you can bring it anywhere and recreate the original database (including data). Again, you don't need any password or aunthentication to do it, further more, in the last step of this process you can change the password of any user (inluding SYS, SYSTEM or another DBA user). The thing about this is that anyone with access to the computer where the database is can make a template of it, take this template to another computer and recreate my database having FULL access to it (structure, data, code ...). And everything without needing any password!!!. I really thing that it is a big problem. Is there any way of preventing this operation?. How can I safely protect my database?. I thought about unistalling the product, but someone can re-install it and everything would be the same. Can someone give me an answer?
Thanks for everything.
Pablo Cuenca

You must protect your database from casual browsing at the OS level. This is not a security hole, per se, since this is a known issue with any and all software. Database Configuration Assistant is not needed for this since one may copy the database without it.

Oracle 9i database configuration assistant cannot be launched

After install 10g ODP.net and Oracle Developer Tools for Visual Studio .NET with ODAC components, the Oracle 9i database configuration assistant program cannot be launched.

Never had this problem before, but this is usually becos of jre version incompatibility. Changing CLASSPATH env might help.

Oracle 9i database configuration assistant hungs

Hi,
Oracle 9i database configuration assistant hungs at a point "creating and starting oracle instance" on my solaris machine
Hence I am unable to create database .
Your help in solving this problem will be highly appreciated.
TIA,
-Amol

Never had this problem before, but this is usually becos of jre version incompatibility. Changing CLASSPATH env might help.

Oracle RAC IP Configuration

Hi all
How Oracle RAC IP configuration uses gateway.
Thanks in advance,
Sarathi

Hi Friend,
Thumb Rules :
1. All public NICs must have the same name on all nodes in the cluster
2. Similarly, all private NICs must also have the same names on all nodes
Use component verifications commands like 'nodereach' or 'nodecon' for this purpose. Type cluvfy comp -help on the command prompt. If the 'cluvfy comp nodecon' command is invoked without -i, cluvfy will attempt to discover all the available interfaces and the corresponding IP address & subnet. Then cluvfy will try to verify the node connectivity per subnet.
You can run this command in verbose mode to find out the mappings between the interfaces, IP addresses and subnets. You can check the connectivity among the nodes by specifying the interface name(s) through -i argument
Note : If you metalink support, there is a step by step document *RAC and Oracle Clusterware Best Practices and Starter Kit (Linux) [ID 811306.1]*
Thanks
LaserSoft

Oracle Beehive Framework Configuration return faliled status(When install)

Hi everybody,
I faced a problem when install Oracle Beehive. All installs of software done, but in next step (Configuration), all configurations done except "Orcl Beehive Frmwork Config". I didn't know what happened, and how to solve this error. Full Error describe below:
Launching tool "Oracle Beehive Framework Configuration"
Invocation timestamp: 1:49:09 PM
Executing command: oracle.ocs.install.plugins.product.main.BeeCfgPlugin ${admin_passwd} ${schema_passwd} ${site_key} C:\oracle\product\1.5.1.0.0\beehive_1 portal.neo.com.vn (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=portal.neo.com.vn)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=oracle))) 3042 21300 21401 21451 orabeehive NEO BeehiveSite FINE SERVER_ONLY true 2 1
[INFO   ] [2009-09-10 13:49:09] [main                 Line 189 ] [---------------------------------------------------------------]
[INFO   ] [2009-09-10 13:49:09] [main                 Line 190 ] [         BEEHIVE CONFIGURATION ASSISTANT (BCA) STARTED ]
[INFO   ] [2009-09-10 13:49:09] [main                 Line 191 ] [---------------------------------------------------------------]
[INFO   ] [2009-09-10 13:49:09] [main                 Line 192 ] [   ]
[INFO   ] [2009-09-10 13:49:09] [main                 Line 193 ] [ Start time    : 2009-09-10 13:49:09]
[INFO   ] [2009-09-10 13:49:09] [main                 Line 194 ] [ Command Line : C:\oracle\product\1.5.1.0.0\beehive_1\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe C:\oracle\product\1.5.1.0.0\beehive_1\beehive\assistants\bin\BeehiveConfigurationAssistant.pl   -primaryTemplateId SERVER_ONLY -availablePhysicalMemory 2GB -availableNumberOfProcessors 1 -ORACLE_HOME C:\oracle\product\1.5.1.0.0\beehive_1 -hostname portal.neo.com.vn -connectString (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=portal.neo.com.vn)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=oracle))) -BTIport 3042 -OMBport 21300 -MXport 21401 -SecureMXport 21451 -enterpriseName orabeehive -organizationName NEO -siteName BeehiveSite -userFirstName BEEAdmin -userLoginid beeadmin -logLevel FINE -firstInstance true ]
[INFO   ] [2009-09-10 13:49:09] [main                 Line 195 ] [   ]
[INFO   ] [2009-09-10 13:49:09] [main                 Line 196 ] [---------------------------------------------------------------]
[BEECTL] [Specify the value for secure option --oc4j_admin_password (The text you type will not be displayed as it is entered):
[BEECTL] [
[BEECTL] [beectl command failed. See the log file "C:\oracle\product\1.5.1.0.0\beehive_1\beehive\logs\beectl\2009.09.10\beectl_modify_deployment_structure_13_49_19+0700.txt" for more details.
[BEECTL] [Connection Unavailable.
[BEECTL] [
[SEVERE ] [GlobalLib::Executor::executeAndReturnDataIfSuccess Line 224 ]
[SEVERE ] [Start Message]
[SEVERE ] [ beectl.exe command execution failed. beectl.exe command returned exit code : 1]
[SEVERE ] [ 1]
[SEVERE ] [End Message]
[INFO   ] [2009-09-10 13:49:23] [GlobalLib::Logger::closeLogger Line 622 ] [Closing the log file : C:\oracle\product\1.5.1.0.0\beehive_1\beehive\logs\config\BeehiveConfigurationAssistant\09.10.2009\BeehiveConfigurationAssistant_13_49_09.log]
Tool "Oracle Beehive Framework Configuration" returned Failed status.Anyone help me please!
My Envs:
OS: window xp
Oracle db: 10gR2.03
Thanks in advance.
Luyen

Hello
I see [BEECTL] [Connection Unavailable.
could you
- test connecting to your database using the exact same settings that you provided to the beehive installer , using a tool like SQLDeveloper or similar ?
- print out C:\oracle\product\1.5.1.0.0\beehive_1\beehive\logs\beectl\2009.09.10\beectl_modify_deployment_structure_13_49_19+0700.txt

Error on "Oracle Beehive Database Configuration - Beehive Schemas"

hi
i got the error "Errors with activating subs ORA-31425: subscription does not exist -31425" in the "Oracle Beehive Database Configuration - Beehive Schemas" stage.
the log file shows this:
2008-11-06_22-52-37 info sql command took 5 seconds
2008-11-06_22-52-37 info db logfilename dblog.2008-11-06_22-52-37
2008-11-06_22-52-37 info oracle home C:\oracle\product\1.4.1.0.0\beehive_2
2008-11-06_22-52-37 info Connecting BEE_code/*****@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=paty.xxxx)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=bee)))
2008-11-06_22-52-37 info Going to run SQL command @C:\oracle\product\1.4.1.0.0\beehive_2\beehive\db\search\src\sqlcode\plsql\ss_cdc_sub_activate.sql
2008-11-06_22-52-37 info DEFINE BDB=C:\oracle\product\1.4.1.0.0\beehive_2\beehive\db\
2008-11-06_22-52-37 info Output from SQL process:
Connected.
Errors with activating subs ORA-31425: subscription does not exist -31425
PL/SQL procedure successfully completed.
2008-11-06_22-52-37 info sql command took 0 seconds
2008-11-06_22-52-37 error schema install failed
Tool "Oracle Beehive Database Configuration - Beehive Schemas" returned Failed status.
=============================================================
i am using oracle 11g as database server.
No other warnings or error are visible.
i try the install on Linux and Windows and the error is the same.
any advice?
thanks

Hello,
Do you have applied all the recommended patches on top of your 11.1.0.6?
Please check the value of the parameter processes and be sure it is enough high (>500)
For CDC issue, please check the following metalink note as well, and apply the recommendations - Note 737948.1
As well, have a look on your limits.conf file to be sure it maches with the kernel recommendations.
Are you installing Beehive and the database on the same machine?
Thanks
Fred

Oracle Service Bus Configuration Project error

When I invoked New Project -> Oracle Service Bus Configuration Project wizard the following problem occurred:
The selected wizard could not be started.
Plug-in "com.bea.alsb.ui" was unable to instantiate class "com.bea.alsb.ui.wizards.NewALSBContainerWizard".
Google search found discussions that date back a year or so, but nothing helpfull.
Used Oracle generic installtion for 64 bit envirnment.
Here is the list of packages and version summary...
jre-6u27-windows-x64.exe
jrockit-jdk1.6.0_26-R28.1.4-4.0.1-windows-x64.exe
wls1035_generic.zip
oepe-helios-all-in-one-11.1.1.7.2.201103302044-win32-x86_64.zip
ofm_osb_generic_11.1.1.5.0_disk1_1of1.zip
OS
windows 7
JRE - Java(TM) SE Runtime Environment (build 1.6.0_26-b03)
JDK - Oracle JRockit(R) (build R28.1.4-7-144370-1.6.0_26-20110617-2130-windows-x86_64, compiled mode)
Oracle 10.2.0
OFM 11g R1
WebLogic 10.3.5.0
OSB 11.1.1.5
OEPE 11.1.1.7.2.201103302044 (Eclipse Version: 3.6.2 Build id: M20110210-1200)

I think your best bet would be to ask this question on the OSB forums.
https://community.oracle.com/community/developer/english/fusion_middleware/soa_%26_process_management/soa_suite_3
Thanks,
Greg

"Oracle Audit Vault Configuration Assistant" failed

Hello everyone, I can across this issue while installing AV agent and wanted to know if any one can help with a quick solution. OS= Linux 5, agent_software= 10.2.3 and here is the error messages:
++**INFO: Configuration assistant "Oracle Audit Vault Agent One-Off Patches" succeeded**++
++**INFO: Command = oracle.av.common.AvcaCfgPlugIn /app/oracle/product/10.2.0/agent_home/bin/avca -s initialize_agent -agentname agentdevmdb1 -agentusr ${s_agentusr} -agentport 7016 -av AHS-SOASOV1-DEVM.ahs.state.vt.us:1521:av.ahs.state.vt.us -rmiport 3121 -jmsport 3300**++
++**Command = oracle.av.common.AvcaCfgPlugIn has failed**++
++**INFO: Configuration assistant "Oracle Audit Vault Configuration Assistant" failed**++
++**-----------------------------------------------------------------------------**++
++***** Starting OUICA *****++
++**Oracle Home set to /app/oracle/product/10.2.0/agent_home**++
++**Configuration directory is set to /app/oracle/product/10.2.0/agent_home/cfgtoollogs. All xml files under the directory will be processed**++
++**INFO: The "/app/oracle/product/10.2.0/agent_home/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.**++
++**-----------------------------------------------------------------------------**++
++**INFO: Created a new file /app/oracle/product/10.2.0/agent_home/cfgtoollogs/configToolFailedCommands**++
++**INFO: Since the option is to overwrite the existing /app/oracle/product/10.2.0/agent_home/cfgtoollogs/configToolFailedCommands file, backing it up**++
++**INFO: The backed up file name is /app/oracle/product/10.2.0/agent_home/cfgtoollogs/configToolFailedCommands.bak**++
++**SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.**++
++**1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.**++
++**2. Fix the errors causing these failures.**++
++**3. Select the failed assistants and click the 'Retry' button to retry them.**++
++**INFO: User Selected: Yes/OK**++

Hi:
A log of everything the avca command is trying to do is kept in $ORACLE_HOME/av/log/avca.log. Please review that to see what could have caused the issue.

Oracle Identity Manager Configuration Error

Versions I have used for the Installation:
Software Version
Oracle Database 11.2.0
Repository Creation Utility 11.1.1.5.0
Web logic 10.3.6
SOA Suite 11.1.1.6.0
Fusion Middle ware Installer 11.1.1.5.0
JDK Oracle Web-logic JRockit JDK or Sun JDK 1.6.0_29
Error : Config Action Oracle Identity Manager Configuration failed
Exception waring occurs in web logic Server :
<Aug 14, 2012 11:57:53 AM GMT+05:30> <Notice> <WebLogicServer> <BEA-000360> <Ser
ver started in RUNNING mode>
<Aug 14, 2012 12:03:49 PM GMT+05:30> <Warning> <Management> <BEA-141239> <The no
n-dynamic attribute AuthenticationProviders on weblogic.management.security.Real
mMBeanImpl@581c390c([OIDM]/SecurityConfiguration[OIDM]/Realms[myrealm]) has been
changed. This may require redeploying or rebooting configured entities>
<Aug 14, 2012 12:03:49 PM GMT+05:30> <Warning> <Management> <BEA-141238> <A non-
dynamic change has been made which affects the server AdminServer. This server m
ust be rebooted in order to consume this change.>
<Aug 14, 2012 12:03:49 PM GMT+05:30> <Warning> <Management> <BEA-141239> <The no
n-dynamic attribute ControlFlag on weblogic.security.providers.authentication.De
faultAuthenticatorMBeanImpl@80d076be([OIDM]/SecurityConfiguration[OIDM]/Realms[m
yrealm]/AuthenticationProviders[DefaultAuthenticator]) has been changed. This ma
y require redeploying or rebooting configured entities>
<Aug 14, 2012 12:03:49 PM GMT+05:30> <Warning> <Management> <BEA-141238> <A non-
dynamic change has been made which affects the server AdminServer. This server m
ust be rebooted in order to consume this change.>
Please give me a solution to resolve the issue

Each version has its won libraries and certain bug fixes. It's always good to see certification matrix first for any software and proceed with installation as per certified components. Also, vendor support your project only if you are using their certified versions. :)
regards,
GP

Oracle 9i AS Configuration

Similar Messages

Maybe you are looking for