Oracle 9i AS post installation help

Hi all,
I had installed the Oracle 9i Infrastructure and Application server successfully on Win2000. Tested the services and demo forms. I Need to know post installation configuration details and steps on how to deploy the forms and reports into it. Thankful if you can provide some help on this.
regards,
Sampath

Ahter installing ias successfully
you can be able to Apache start/stop ,Forms and Reports server sample application ,and lot's of other stuff under oracle-iSuits.
For example if you want to see the Apache main page start the server and in the browser page type the host name you can see the links.
null

Similar Messages

Oracle 10.2 Post Installation

Finished the Installation of ECC 6.0 on AIX 5.3 and Oracle 10.2 .
What are all post installtion for Oracle 10.2 like ECC 6.0
Thanks

Hi,
Could you please suggest me any SAP Note for Oracle & Interim patches
Below SAP Notes may be of your help.
[Note 839187 - Oracle 10.2.0: Applying patch set/patches/patch collection|https://service.sap.com/sap/support/notes/839187]
[Note 1137346 - Oracle 10.2.0: Patches/patch collections for Oracle 10.2.0.4|https://service.sap.com/sap/support/notes/1137346]
Also see the related notes given in the above note (at bottom)
Should we do any change at Oracle level manually as Post Installation
Please see "Readme" file in every patch collection for post installation steps...
Regards.
Rajesh Narkhede

XI post installation help!!!

Dear SAP gurus,
I have installed XI3.0 successfuly and could perform post installation steps successfully.
When i went through the document of readyness check of XI here i need to run T-code sproxy in order to check
1-) =>Check/maintain with report SPROX_CHECK_IFR_ADDRESS 2-) =>Check with report SPROX_CHECK_HTTP_COMMUNICATION
3-) =>Check with report SPROX_CHECK_IFR_RESPONSE
4-) ==>Check with report SPROX_CHECK_IFR_CONNECTION
My only connection that is working is (2) which says "Http communication is functioning".
but if i try to check (1) connection it says error "ERROR: Address not maintained".
Because of this error i think (3) and (4) connection test is also not working properly.
I could successfully import exchange profile but i have not been able to understand where the problem exist and not able to run T-code successfully.
Please help me!!!
Thanks and Regards
Dheeraj Thareja

Have you checked the Integration_direcroty_hmi RFC?
I would also check the sldapicust
and the config in sxmb_adm - adapter engine
Also check the exchangeProfile: Particulary the following:
com.sap.aii.connect.repository.name:
com.sap.aii.connect.repository.httpport:
com.sap.aii.connect.repository.contextroot:
Furthermore, the logon data is also read from the exchange profile
(section 'ApplicationSystem'):
com.sap.aii.applicationsystem.serviceuser.name:
com.sap.aii.applicationsystem.serviceuser.pwd:

Oracle Enterprise Repository post installation steps failed.

Hi,
I was able to install Oracle 11g Express and Weblogic 10.3.6.0 and 11.1.1.6.0 and when try to follow post installation steps to extend a domain installation fails with following steps. Could you please assist me
what could i have done wrong or suggest me hints to locate the error.
2013-01-30 23:08:04,768 INFO [WizardController] com.oracle.cie.domain.template.catalog.impl.ComponentsXMLConverter - C:\Oracle\Middleware\wlserver_10.3\common\lib\components.xml does not contain component elements and will be skipped
2013-01-30 23:08:11,830 INFO [WizardController] com.oracle.cie.wizard.domain.gui.tasks.MultipleTemplateSelectionGUITask - Selected required template: Basic WebLogic Server Domain:10.3.6.0 [C:\Oracle\Middleware\wlserver_10.3\common\templates\domains\wls.jar]
2013-01-30 23:08:15,362 INFO [WizardController] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
2013-01-30 23:08:15,471 WARN [WizardController] com.oracle.cie.domain.AbstractTemplate - Could not find component name 'Oracle Enterprise Repository' version 'null'
2013-01-30 23:08:15,471 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Replacing component reference Oracle Enterprise Repository version null with top-level component reference: WebLogic Server version 10.3.6.0
2013-01-30 23:08:15,471 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Setting symbol for component WebLogic Server version 10.3.6.0 to WebLogic_Server_10.3.6.0_wlserver_10.3_ORACLE_HOME
2013-01-30 23:08:27,096 INFO [WizardController] com.oracle.cie.domain.assignment.ServerMachineAssignment - ListenPort internal Validation result= [null]
2013-01-30 23:08:28,737 INFO [WizardController] com.oracle.cie.domain.DomainChecker - ListenPort external Validation result= [null]
2013-01-30 23:08:32,580 ERROR [create_gui] com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask - Generation Error!!
Traceback (innermost last):
(no code object) at line 0
SyntaxError: ('Lexical error at line 6, column 11. Encountered: "@" (64), after : ""', ('<iostream>', 6, 11, 'oerPort = @DOMAIN_LISTEN_PORT@'))
     at org.python.core.parser.fixParseError(Unknown Source)
     at org.python.core.parser.parse(Unknown Source)
     at org.python.core.Py.compile_flags(Unknown Source)
     at org.python.util.PythonInterpreter.execfile(Unknown Source)
     at org.python.util.PythonInterpreter.execfile(Unknown Source)
     at com.oracle.cie.domain.script.ScriptHelper.executeEmbeddedTemplateScript(ScriptHelper.java:1574)
     at com.oracle.cie.domain.DomainChecker.executeEmbeddedScript(DomainChecker.java:1322)
     at com.oracle.cie.domain.DomainChecker.runCustomWLSTScript(DomainChecker.java:1305)
     at com.oracle.cie.domain.DomainChecker.preprocessOutput(DomainChecker.java:143)
     at com.oracle.cie.domain.TemplateImporter.generate(TemplateImporter.java:274)
     at com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask$1.run(DomainCreationGUITask.java:216)
Thanks
Edited by: 985275 on Jan 31, 2013 12:13 AM

Hi,
After installing Oracle DB, did you Install RCU setup succesfully??
If not, Install RCU and then procced.
-Santosh

Oracle 10g express - post installation

Hi All !
I installed Oracle 10g exp. on my linux system (fedora core 4) yesterday. I am very new to both the linux os and oracle db. So I'm sure I messed up somewhere, though I can't figure out where....if anyone could help me....here is the problem
installation was successful...I configured Oracle db with default http port:8080, listener: 1521 and the password.
after installation I don't see oracle icons on my redhat menu. I tried opening in the browser with this
http://(hostname):8080/htmldb and it does not bring up anything. I may be doing something wrong in looking up the hostname...here is the listener.log file....I'd appreciate if any1 could tell me what is wrong.
Thank you,
-----------------------------listener.log-----------------------------
System parameter file is /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Log messages written to /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Trace information written to /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/trace/listener.trc
Trace level is currently 0
Started with pid=10287
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=pcp0010100038pcs.levtwn01.pa.comcast.net)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Linux Error: 99: Cannot assign requested address

I encountered this issue on my laptop and realized it was because I installed Oracle XE when connected via DHCP. I never manually specified a hostname so my install was burned with crazy DHCP hostnames which of course change every time I get onto my work network. So to fix it, I did the following:
1. Hard set a hostname (Fedora Core 6 /etc/sysconfig/network + hostname command)
2. Updated tnslistener.ora and tnsnames.ora to use the new hostname
3. force-reload
All good. JDBC connects, "service oracle-xe status" is good and the home page is back.

Oracle 8.1.6 Installation - Help-me!!!!!!

I'm trying to install Oracle 8.1.6 from CD on Conectiva Linux but when I run ./runInstaller a blank window is displayed and nothing happens.
I'm using linux kernel 2.2.16. During installation, some processes still running, consuming CPU, but nothing is wrote to disk.
I already download JRE 1.1.8 from ibm/java, altered oraparam.ini to point JRE_LOCATION to /usr/java/jre118 (that is the location where I unzip downloaded JRE) and nothing happens.
What's wrong?

Hi!
You don't need to install another Java Runtime Version - it comes with Oracle 8.1.6 and you only should use this one with Oracle.
Did you set the Oracle installation acount group ID to "oinstall"?
Be shure to set the $ORACLE_BASE and the $ORACLE_HOME in your local .profile or .bashrc before starting the installation.
HTH
Gerhard

Vtiger from aur - post installation help

I would like to try out vtiger crm. There's a package for it in the AUR. I installed it using the trusty packer.
There were a few caveats. I had to manually install libjpeg, since its dependency name is different than its actual install name:
packer -S libjpeg-turbo
packer -S vtigercrm
I then started mysql and apache
cd /etc/rc.d
./mysqld start
./httpd start
I tried navigating to the site served up by apache but neither the index nor the install php files come up properly. It just shows the source of those files. I assume there are some other steps that much be done, but I am not sure what. I have looked through the documentation on vtiger's site for installation on Linux, but can't seem to figure out what needs to come next
Last edited by senorsmile (2012-01-05 01:24:36)

I got it set up. Here is my best summary of each roadblock I ran into and how I got around it:
Starting with the problem you're having - my /etc/httpd/conf/extra/httpd-vtigercrm.conf looks like this:
AllowOverride All
AddHandler cgi-script .cgi .pl
Options ExecCGI Includes FollowSymlinks
Order Allow,Deny
Allow from All
I stole these lines from the corresponding conf file for sql-ledger which I hacked together a few weeks ago. I don't know what these lines do, I'm still learning what the hell I'm doing
That opened up the dialogue when I pointed my browser at the proper address. After that I had some trouble with the fields there - here's a screenshot and some explanation of what worked:
http://forums.vtiger.com/vtiger/demo/wi … -Step5.JPG
I ended up using localhost:port like this example because that, of course, was where mysql was for me. Pretty self-explanatory, but I was using the hostname of the server for awhile and it wasn't working, so hey. I got a little confused with the redundancy of the sql username fields on the left - if you check the Create Database field, it opens up a seemingly-redundant set of fields. Anyway, using the root username and password for mysql in both sets of fields worked for me. The User Configuration on the right is for logging into vtiger for the first time once it's set up.*
After that, I thought I was on a roll.. .then I got the following error:
You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'Type=InnoDB' at line 7Error: Tables partially created. Table creation failed.
I found out that this has to do with the fact that vtiger isn't compatible with the latest versions of mysql or php. Specifically, it uses a depreciated command to create the databases. I was able to fix it with some manual editing:
First I edited /etc/mysql/my.cnf and followed the commented instructions to enable InnoDB databases.
Not-exactly-following the instructions at http://mayoorathen.blogspot.com/2011/04 … ation.html, I edited schema/DatabaseSchema.xml and replaced all instances of Type with ENGINE. If you have vim, it's easy. Navigate to the schema directory and:
vim DatabaseSchema.xml
Then type : to get a command prompt-ey thing, and enter
%s/\<Type\>/ENGINE/g
Save with :w and quit with :q. Gotta hit enter after each. Probably preaching to the choir here, but I thought I'd be thorough.
I also did the same operation to 503_to_504rc.php under modules/Migration/DBChanges/ - just open it in vim and use the same command. I figured this would be a good idea in case I ever needed to, uh, migrate things. Or something...
After that it installed without a hitch. I'll post if it turns out I broke anything. If you see anything in blatantly poor practice, please enlighten me!
*I probably didn't have to do this, but I'm including it as a possible last-resort: before this step was completed I ended up accessing mysql in an ssh session and manually creating the database, then granting permission to any user from my other machine to mess with it. If you don't know your way around that stuff already, this is what walked me through it: http://www.cyberciti.biz/tips/how-do-i- … erver.html
Moderator edit: The included image ist too big. See our policy.
Last edited by bernarcher (2012-02-16 08:49:54)

Post installation help

Hi,
I have tried to install Solaris 10 on AMD XP processor
I did not have any problems with installation. The Boot CD recognizes the hardware and installation was successful. Offers me " Reboot now" button.
After reboot, blue scree appears to choose the boot partition (I have Windows XP on other partition).
I choose Solaris and another blue screen appears and the message shows "Booting ...." but never comes up with another message. Waited for long , no result .
Any idea ?
thanks & regards
Kiran

Mine wasn't a blue screen after rebooting into Solaris after successfully installing it.
Well, you could get a blue screen if you interrupt the booting process and get to the hardware configuration process. Regardless, it wouldn't halt.
Did you install the x86boot partition for Solaris? I assume you must have, because you wouldn't see the options for booting (blue screen) without installing x86boot.
It also might be incompatibility issue. Did you configure graphics card and the display correctly?
It might also be the case with BIOS issue with some computers. I'm not sure about this, but you might check it out and see if it's compatible with Solaris. Some Dell Computers have old BIOS that isn't compatitble with Solaris (from what I heard of other people).
hope it help.
-van.

Oracle Hyperion Performance Scorecard Installation Help.

Hi Guys,
I would like to install Oracle Hyperion Performance Scorecard on a VMWare Virtual Machine. As of now there's a pretty blank Windows 2003 Server installation on it.
What do I need to install it? I downloaded the EPM System Installer and the EPM Foundation Services, together with the Performance Scorecard Install file.

Set the system configuration.
Windows XP 2003 SP2
Database : oracle / sql
Installl : Oracle EPM Suite the following components:
-Oracle EPM Foundation / Shared Services
-Oracle EPM Performance Scorecard
Please check and confirm.
regards,
Apo

Oracle Ebiz R12 Post Installation Issues

Hi guys,
I have just installed Oracle Apps R12.1.1 - fresh install- on windows xp but getting this error when I try to go into forms. I still get the error even after installing a higher version:
1) FRM-92095 :Oracle JInitiator version too low. Please install version 1.1:8.2 or higher
2) Again, I can't log onto Sqlplus due to this error:
Enter user-name: apps/apps
ERROR:
ORA-12560: TNS:protocol adapter error
3) I get only dos prompt for sqlplus logon and not the usual sqlplus white background screen.
4) from Programme, Start menu, I can't see the Forms and report developer menus.
Will appreciate any contributions
Ify

Hi Hussein,
Thanks a lot for your quick response. Please below my reply to yours (" ").
Did you install on XP Professional?
"Yes I did "
Did the installation complete successfully with no errors?
"Yes I did "
1) FRM-92095 :Oracle JInitiator version too low. Please install version 1.1:8.2 or higher
2) Again, I can't log onto Sqlplus due to this error:
Enter user-name: apps/apps
ERROR:
ORA-12560: TNS:protocol adapter error
Please run AutoConfig and make sure it completes successfully.
“I have run AutoConfig and it took just 1 min to run and shuts down. I installed Jav6 update 31 and now gets a different error while trying to open the form:
Frm-92101: There was a failure in the forms server during startup. This could happen due to invalid configuration . Please look into the web –server log file for details”
“I do not know where the path for the web-server log to look into”
Also, please make sure you source the application/database env file before you connect via sqlplus.
“Please can you confirm how to source the application/database env file “
3) I get only dos prompt for sqlplus logon and not the usual sqlplus white background screen.
This is an expected behavior since R12 comes with 11gR1 database.
4) from Programme, Start menu, I can't see the Forms and report developer menus.
How To Bring Up 10G Forms Builder In R12 Environment? [ID 579318.1]
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
“I do not have access to metalink. Please can you summarize the solution ”

Windows 7, Oracle 11g Client Post-Installation Error

Hello all--
Background Info:
- I have installed Oracle 11g Client (32-bit) on my Windows 7 Professional (32-bit) workstation.
- The ORACLE_HOME directory (in my case C:\Oracle\Ora11g) is in the PATH environment variable.
- I have created TNS_ADMIN as an environment variable that points to a network folder that contains our tnsnames.ora and sqlnet.ora.
- I can tnsping our servers and sqlplus connects without issue.
- I am logged in as a regular network user (added into the local Administrators group on my machine).
The problem is that I cannot connect using a user or system DSN in the Microsoft ODBC Administrator, BUT, I can connect with a DSN when I am logged in with the local Administrator account. I have verified the DSNs are setup correctly. The error I get is the ORA-12154 error.
Here is the exact error as it appears:
Unable to connect
SQLState=08004
[Oracle][ODBC][Ora]ORA-12154: TNS:could not resolve the connect identifier specified
If I copy the tnsnames.ora file from the network to my machine and remove/redirect TNS_ADMIN to the %ORACLE_HOME%\NETWORK\ADMIN folder, it works with my user account.
Any thoughts?
Thanks!
Matt

Hi All--
I figured out what the problem was and I wanted to share what our solution was.
Basically, when you open the Microsoft ODBC Administrator in Windows 7, it has to run with elevated privileges and loads the Administrator profile. Our tnsnames.ora and sqlnet.ora files are on a network share that we map to a drive letter for all users across our organization. The Administrator profile does not have this drive mapping. So I created the TNS_ADMIN environment variable with the full UNC path and I was able to test DSNs successfully.
Regards,
Matt

Beehive post-Installation problem

Hi, I'm istalling Oracle Beehive 2.1.0.0 in a Oracle Linux 5.
First I installed Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production, then guided by I installed Oracle Beehive, I followed the post-installation procedures http://docs.oracle.com/cd/E16671_01/bh.200/e16641/what_you_need_to_know.htm#BIJGGFJH, in the first step (Oracle Beehive Database Post-Installation Procedures - http://docs.oracle.com/cd/E16671_01/bh.200/e16641/db_post.htm#BHAJIEID) I make correctly (at least) the first two steps, in the third one no error show but if I check configuration with the “list_bootstrap_configuration” command what I see is that the desired password is in the schema name field.
After this, I can only use some of the commands, for example with activate_configuration or list_ports I receive:
beectl: command failed. See the log file "/u01/app/beehive/product/2.0.1.0.0/beehive_1/beehive/logs/beectl/2012.06.15/beectl_shell_17_06_04+0300.txt" for more details.
Log says:
2012-06-15T15:27:30.528+03:00] [beehive] [WARNING] [] [commandline.OcsCtlException] [host: sergio.signum.com.tr] [nwaddr: 127.0.0.1] [tid: 10] [userId: oracle] [ecid: 127.0.0.1:24886:1339763249622:1,0] new-beectl-exception-instantiated-logging-automatically : (no-message-to-log)[[
oracle.ocs.commandline.BeeCtlException
at oracle.ocs.commandline.framework.ConfigurationManagerInitializer.initConfigManager(ConfigurationManagerInitializer.java:161)
at oracle.ocs.commandline.framework.ConfigurationManagerInitializer.initialize(ConfigurationManagerInitializer.java:138)
at oracle.ocs.commandline.framework.OcsCtlApplicationScope.initConfigurationManager(OcsCtlApplicationScope.java:448)
at oracle.ocs.commandline.framework.OcsCtlSession.initConfigurationManager(OcsCtlSession.java:498)
at oracle.ocs.commandline.sysmodel.ConfigurationManagerHelper.<init>(ConfigurationManagerHelper.java:101)
at oracle.ocs.commandline.sysmodel.ConfigurationManagerHelper.getInstance(ConfigurationManagerHelper.java:108)
at oracle.ocs.commandline.CommandEnv.getConfiguration(CommandEnv.java:570)
at oracle.ocs.commandline.framework.infracmds.ModifyBsp.execute(ModifyBsp.java:345)
at oracle.ocs.commandline.framework.LocalCommandExecutionEnv.execute(LocalCommandExecutionEnv.java:90)
at oracle.ocs.commandline.framework.ModeHandler.executeCommand(ModeHandler.java:525)
at oracle.ocs.commandline.framework.ShellModeHandler.executeCommandLocally(ShellModeHandler.java:205)
at oracle.ocs.commandline.framework.ShellModeHandler.access$300(ShellModeHandler.java:71)
at oracle.ocs.commandline.framework.ShellModeHandler$ProcessLine.processLine(ShellModeHandler.java:279)
at oracle.ocs.commandline.framework.ShellModeHandler$ProcessLine.access$100(ShellModeHandler.java:208)
at oracle.ocs.commandline.framework.ShellModeHandler.processCmd(ShellModeHandler.java:159)
at oracle.ocs.commandline.framework.OcsCtl.main(OcsCtl.java:174)
Caused by: oracle.ocs.core.store.exceptions.DataStoreProviderException: Unable to get Config DataSource
at oracle.ocs.framework.store.DataStoreAccessLocalFactory.getConfigDataSource(DataStoreAccessLocalFactory.java:564)
at oracle.ocs.commandline.framework.ConfigurationManagerInitializer.initConfigManager(ConfigurationManagerInitializer.java:159)
... 15 more
Caused by: java.sql.SQLException: MalConfiguration Exception.
at oracle.ocs.framework.store.OcsNonJndiBootstrapDataSource.<init>(OcsNonJndiBootstrapDataSource.java:137)
at oracle.ocs.framework.store.DataStoreAccessLocalFactory.getConfigDataSource(DataStoreAccessLocalFactory.java:561)
... 16 more
Caused by: oracle.ocs.core.store.exceptions.MalConfiguredDataStoreException: Unsupported Connect String: beehiveConn
at oracle.ocs.core.store.DbUtil.getServiceNameFromConnectString(DbUtil.java:479)
at oracle.ocs.framework.store.OcsNonJndiBootstrapDataSource.<init>(OcsNonJndiBootstrapDataSource.java:135)
... 17 more
Even if I try to clear the data given in previous steps with “clear_proposed_configuration” command I received the error.
I checked and there are 6 patches, but it seems none of them fix the problem, althought I couldn’t find from where to download. Also In the contents of the installation of Beehive, one point (out of the installation against database) it’s about installing Oracle Beekeaper, maybe that will help, but as far as I know it’s only a UI for Beehive.
(http://docs.oracle.com/cd/E16671_01/bh.200/e16649/beectl.htm#list_bootstrap_configuration here is the documentation about beectl)
Maybe the problem is that I'm installing in a 64 bits and documentation of Beehive says that only 32 bits is supported, but I needed to try because our client machine is a 64bit Linux .. any other suggestion?

for Instant Messaging, I believe you need to review Chapter 25 (Configuring XMPP) of the Installation Guide.
At least you need to do a
beectl modify_property --component _XmppService name DomainNames value <domain>
beectl activate_configuration
beectl restart --component BEEAPP_<instance>.<host>
For any user partaking in IM, you need to define an IM Address, as this is needed to provision the user to the XMPP Service.
If you master your user in an external directory, you can map existing mail addresses to also be used as IM Address, e.g.
<directory_attribute_map_entry>
<source_object>ENTERPRISE_USER</source_object>
<AttributeMap>
<Field>
<source_attribute>mail</source_attribute>
<target_attribute>BUSINESS</target_attribute>
<target_extended_attribute>IM</target_extended_attribute>
<target_attribute_type>ADDRESS</target_attribute_type>
</Field>
HTH, Thomas

Problem in XI after post installation.

I have done the post installation for PI, everything was fine and sucessfull,
but the problem is, in XI check list there is no objects found in the Integration Repository and Integration Directory with the URL ( http:
emsap008:50100\rep\start\index.asp ).
Let me explain the problem which i faced.
In the transaction SXMB_IFR --> Tool --> Import Design Objects Option, the result displaied is " There is no Objects found ". But as per the document i need to get " PI7_0_BASIS_6.40_18_00.tpz ".
Please clarify my doubt, ask me if my question is insuffecient.

Hi Senthil !!
Here is the guide with necessary steps
http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
/people/sravya.talanki2/blog/2006/11/15/post-installation-steps-for-activating-adobe-document-services-in-sap-xi-nw-2004s
You will get the details of post installation activities for SAP XI in its installation guides itself. Have a look:
SAP Exchange Infrastructure Release 3.0 - Installation Guide
SAP Exchange Infrastructure 3.0 SR1 - Installation Guide
Plus you can go through the following docs:
SAP Exchange Infrastructure (XI) 3.0
Troubleshooting Guide - SAP XI 3.0 and 2.0
SAP XI Release 3.0 SPS11Configuration Guide
Also you can have a look at the following thread, you will get some links in these threads too:
Post installation of XI?
XI INSTALLATION and POSTINSTALLATION
XI Post Installation....Need help...
XI Post Installation - Help
XI Post Installation - SLD Connection
refre this thread
Post Installation of PI - PI template Installer not found
<b>Pls rewards if useful</b>

Post installation for XI

Hi All,
I have installed ECC 6.0. I have added XI component also. Now i need to perform post installation steps for XI alone. i have downloaded the NW7 installation Guide MAXDB. is that enough? or should i need more documents....
Also, i found out a document for post installation guide system landscape directory of SAP Netweaver 7.0....
Which one should i follow?
Please clarify....
Thanks in advance,
Madhukar

Hi madhukar !!
Is this what you are looking for:
https://websmp103.sap-ag.de/~sapidb/011000358700001697502004E.PDF
Also check this thread..
Re: XI INSTALLATION and POSTINSTALLATION
those describe din XI installation and configuration guides:
http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
check this thread for SLD configuration soon after XI installation
SLD configuration
Check this link also it has the procedure.
http://help.sap.com/saphelp_nw2004s/helpdata/en/78/20244134a56532e10000000a1550b0/frameset.htm
Here is the guide with necessary steps
http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
/people/sravya.talanki2/blog/2006/11/15/post-installation-steps-for-activating-adobe-document-services-in-sap-xi-nw-2004s
You will get the details of post installation activities for SAP XI in its installation guides itself. Have a look:
SAP Exchange Infrastructure Release 3.0 - Installation Guide
SAP Exchange Infrastructure 3.0 SR1 - Installation Guide
Plus you can go through the following docs:
SAP Exchange Infrastructure (XI) 3.0
Troubleshooting Guide - SAP XI 3.0 and 2.0
SAP XI Release 3.0 SPS11Configuration Guide
Also you can have a look at the following thread, you will get some links in these threads too:
Post installation of XI?
XI INSTALLATION and POSTINSTALLATION
XI Post Installation....Need help...
XI Post Installation - Help
XI Post Installation - SLD Connection
Post Installation of PI - PI template Installer not found
Pls reward if useful

Hello installed xi and trying 2 do post installation but getting problem

Hello,
          I installed SAP XI and trying to do the post installation...
          1)Created one client 100 and user XIUSER....with all rights like sap_all
          2)And created one more user XISUPER......only roles given...
          3)now I am trying with internet expositor
              http://application server:java port/exchangeProfile
                 screen came user:xisuper
                                      p/w: 12345
                       BUT IS NOT GOING FORWRD....WHAT MIGHT BE THE PROBLEM..... TRY TO GIVE ME THE SUGGESTION....
Regards,
Sateesh.j

Hi !!!
Here is the guide with necessary steps
http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
/people/sravya.talanki2/blog/2006/11/15/post-installation-steps-for-activating-adobe-document-services-in-sap-xi-nw-2004s
You will get the details of post installation activities for SAP XI in its installation guides itself. Have a look:
SAP Exchange Infrastructure Release 3.0 - Installation Guide
SAP Exchange Infrastructure 3.0 SR1 - Installation Guide
Plus you can go through the following docs:
SAP Exchange Infrastructure (XI) 3.0
Troubleshooting Guide - SAP XI 3.0 and 2.0
SAP XI Release 3.0 SPS11Configuration Guide
Also you can have a look at the following thread, you will get some links in these threads too:
Post installation of XI?
XI INSTALLATION and POSTINSTALLATION
XI Post Installation....Need help...
XI Post Installation - Help
XI Post Installation - SLD Connection
refre this thread
Post Installation of PI - PI template Installer not found
just check also have you done this step ?
This step is not covered by the PI template.
You need these files The files SCM4003_00.ZIP and SCMBASIS4003_00.ZIP
Further reference
http://help.sap.com/saphelp_nw04s/helpdata/en/44/5755451622311ee10000000a155369/content.htm
Another thing are the j2ee adapters and the adapter engine visible in the ID just check once. If not then go through these.
1)Yeap you need the basis component imported first.
2) Apply SAP Note 764176.
3. /people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
<b>pls reward if useful</b>

Oracle 9i AS post installation help

Similar Messages

Maybe you are looking for