Oracle 9i can't start install progress

I download oracle 9i install disk and extract to my hard disk E:(NTFS Partition, 46GB). I click setup.exe, after wait 6 seconds, no response.
My computer:
Windows 2000 Server with Service Pack3,
CPU P4 2.4GB, Seagate Hard Disk ST380021A, 256M RAM
three Partition:
C: is NTFS, 10GB, D: is FAT32, E:NTFS,46GB

this is BUG. if you copy install files to a bigger partition (bigger than 24GB), this problem appears.
but when copy to another smaller partition, no any problem

Similar Messages

Help : can't start install on PowerMac G4

Hi all,
I am a new Mac user! I just got a PowerMac G4 dual-processor 1 GHz with Mac OS 9.2.2 and would like to install Leopard on it... But, the install program does not start when I insert the DVD, even after having restarted the computer.
Only a window appears with the main DVD folders. I can't start 'Install Mac OS X.app'...
My PowerMac has a Pioneer DVR-104.
So, what's wrong?
Thanks a lot for your help.
Cheers.

Thomas_73 wrote:
Hi all,
I am a new Mac user! I just got a PowerMac G4 dual-processor 1 GHz with Mac OS 9.2.2 and would like to install Leopard on it... But, the install program does not start when I insert the DVD, even after having restarted the computer.
Only a window appears with the main DVD folders. I can't start 'Install Mac OS X.app'...
My PowerMac has a Pioneer DVR-104.
So, what's wrong?
Thanks a lot for your help.
Cheers.
Do you have at least 512 MB RAM?
I wonder if OS9 does not "understand" the Leopard install program.
I would suggest backing up everything on the system you want to keep and then reboot with the Leopard DVD in the drive and hold down the "C" key. You should be able to do an install that way. I would highly recommend an erase and install. On the page after the Language screen, at the bottom, select Options and then select Erase and Install.

How can I start install the design on FPGA

hi ,
i design a system on the labview 8.2 thats detect some parameter of the ECG signal , now i wnat to install the design on the FPGA kit
kown the input signal is real time ECG signal .
how can i start doing this ?
what the needed informaton to do that ?
thank you

Hi - I just want to clarify that National Instruments does not make any signal conditioning modules or other products that are designed for direct connection to a human subject (we don't design or certify to the required medical safety standards). Our products are often used in conjunction with amplifiers or signal conditioners that are designed for these applications that have outputs that are filtered, isolated, and amplified and are ready to be digitized by a DAQ board or other NI product.
If used on animals, these safety concerns are often not as big an issue, but you still need a specialized signal conditioner that has a relatively high gain and balanced differential inputs (with high common-mode rejection) to acquire a good, low-noise ECG signal. This is similar to a thermocouple type input module, but with more bandwidth than a typical thermocouple module and AC coupling.
Bottom line: you really need to use a specialized biosignal amplifier that has a single-ended analog output to connect to NI DAQ boards or FPGA boards.
Steve J.
National Instruments
Visit the NI Biomedical User Group at:
www.ni.com/biomedusers

I already partitioned my hdd via Bootcamp, supports downloaded, and windows is on an external USB. How can I start installing Windows now? at startup it doesnt show up as bootable device...

hi,
I am having a problem installing windows via bootcamp.
I already partitioned my hdd via Bootcamp, downloaded and copied all the supports for windows, and windows is on an external USB as well. I had to stop the process the other day, so i shut down the computer. Now I am trying to boot from the USB, but I cant get to that point where the computer should restart and windows would start installing.
. After restarting, holding command, it doesnt show up as bootable device.
How shall I move forward? My disk is already partitioned, and if i start the whole process from the beginning, it wants me to partition again - although I already made a 100GB partition for windows.
Please help me out.
best,
Zoltan

So, here is what happened when I tried to make it.(sorry for quality, i had to take them by phone)
At first when I opened it I saw that I could simply resolve it just by stretching the arrow at the bottom, giving the 100 GB back which I partitioned before via Bootcamp. At this point options was not available.
I didnt do it because you mentioned earlier that it might be not designed to install windows.
The second thing I tried I choose 1 Partition from Partition Layout. This time Options were available but I didnt see anything like GPT, the onces that are optionable are on the screenshot.
What do you think how shall I move on? I was thinking to give it a shot with option 1, just stretch it back and try everything from scratch.

Oracle 9i can't start

We are using oracle 9i db server. when starting any database tools like enterprise manager,sqlplusw it gives the error message like this:
ORA -12638 Credential retrival failed
Please help me...

by setting the value as NONE the following error occured:
ORA - 01034 : ORACLE NOT AVAILABLE
ORA - Shared memory realm does not exist.
Additional info:
we have 2 servers. one is file server and other is db server. db server is configured as a mirror of file server. file server is a domain controller. recently our file server got crashed and we reconfigured it them this problem arises.(e.g.) to login to scott db we use
connect [email protected]

Why is my install not completed. I can't see install progress and I cannot cancel install

I am trying to install Firefox and it seems to be frozen on import screen. Should I see progress or be able to cancel install? I cant go back, next or cancel and nothing appears to be happening.

Hello,
Try download and install from a full version:
*[https://www.mozilla.org/firefox/all/]

Oracle 10G - can't start TNSListener

The TNSListener no longer automatically starts on my 10g Database. It has been set up to work automatically, and was fine until recently. It is still listed as being an automatic service, but even when started manually it still fails. The error message I get is "Could not start XXXXX TNSListener service on Local Computer. Error 1067: The process terminated unexpectedly." Any suggestions as to how I go about fixing this will be greatly appreciated

Did anyone change anything in the listener.ora? Check to see if there are any extra/missing spaces/parenthesis and check the format.

I can not start Instalation from my cs6, because the Installationprogramm says, installer couldn´t initialise

how can i get an Installer to initialise my cs6?

If you are still receiving this error message when running the proper installation media then please remove all Adobe Creative Software and run the CS Cleaner Tool. You can find details regarding the CS Cleaner Tool at CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
It would be the best way to remove the Adobe Application Manager to allow you to reinstall.
Regards
Rajshree

What is maximum amount of memory that oracle db can utilize ?

Hi
Thank you for reading my post
What is maximum number of memory that oracle database can utilize for each of its memory structure like sga, caches....
Thanks

ps, the following may help too
VLM) Configurations
Oracle Database for Windows supports Very Large Memory (VLM) configurations in Windows 2000, Windows 2003, and Windows XP, which allows Oracle Database to access more than the 4 gigabyte (GB) of RAM traditionally available to Windows applications.
Note:
This feature is available on Windows 2000, Windows 2003, and Windows XP only with Intel Pentium II and above processors.
Specifically, Oracle Database uses Address Windowing Extensions (AWE) built into Windows 2000, Windows 2003, and Windows XP to access more than 4 GB of RAM.
The requirements for taking advantage of this support are:
1. The computer on which Oracle Database is installed must have more than 4 GB of memory.
2. The operating system must be configured to take advantage of Physical Address Extensions (PAE) by adding the /PAE switch in boot.ini. See Microsoft Knowledge Base article Q268363 for instructions on modifying boot.ini to enable PAE.
3. It is advisable (though not necessary) to enable 4GT support by adding the /3GB parameter in boot.ini. See Microsoft Knowledge Base article Q171793 for additional requirements and instructions on modifying boot.ini to enable 4GT.
4. The user account under which Oracle Database runs (typically the LocalSystem account), must have the "Lock memory pages" Windows 2000 and Windows XP privilege.
5. USE_INDIRECT_DATA_BUFFERS=TRUE must be present in the initialization parameter file for the database instance that will use VLM support. If this parameter is not set, then Oracle Database 10g Release 1 (10.1) or later behaves in exactly the same way as previous releases.
6. Initialization parameters DB_BLOCK_BUFFERS and DB_BLOCK_SIZE must be set to values you have chosen for Oracle Database.
Note:
The total number of bytes of database buffers (that is, DB_BLOCK_BUFFERS multiplied by DB_BLOCK_SIZE) is no longer limited to 3 GB.
Dynamic SGA and multiple block size are not supported with VLM. When VLM is enabled, the following new buffer cache parameters are not supported:
o DB_CACHE_SIZE
o DB_2K_CACHE_SIZE
o DB_4K_CACHE_SIZE
o DB_8K_CACHE_SIZE
o DB_16K_CACHE_SIZE
o DB_32K_CACHE_SIZE
To select the block size for the instance, use the initialization parameter DB_BLOCK_SIZE. The buffer cache size is set by the initialization parameter DB_BLOCK_BUFFERS.
7. Registry parameter AWE_WINDOW_MEMORY must be created and set in the appropriate key for your Oracle home. This parameter is specified in bytes and has a default value of 1 GB. AWE_WINDOW_MEMORY tells Oracle Database how much of its 3 GB address space to reserve for mapping in database buffers.
This memory comes from the 3 GB virtual address space in Oracle Database, so its value must be less than 3 GB. Setting this parameter to a large value has the effect of using more of the address space for buffers and using less AWE memory for buffers. However, since accessing AWE buffers is somewhat slower than accessing virtual address space buffers, Oracle recommends that you tune these parameters to be as large as possible without adversely limiting database operations.
In general, the higher AWE_WINDOW_MEMORY is set, the fewer connections and memory allocations will be possible for Oracle Database. The lower AWE_WINDOW_MEMORY is set, the lower the performance.
8. Once this parameter is set, Oracle Database can be started and will function exactly the same as before except that more database buffers are available to the instance. In addition, disk I/O may be reduced because more Oracle Database data blocks can be cached in the System Global Area (SGA).
Note:
Registry parameter VLM_BUFFER_MEMORY, which enabled VLM configurations in earlier releases, is not supported in Oracle Database 10g Release 1 (10.1) or later.
VLM Instance Tuning
VLM configurations improve database performance by caching more database buffers in memory. This reduces disk I/O compared to configurations without VLM. VLM support in Oracle Database 10g Release 1 (10.1) or later has been re-written to integrate very closely with Windows. Compared to Oracle8i release 2 (8.1.6), VLM users should see better performance with the newer implementation.
Tuning for VLM is no different than tuning for configurations without VLM. It is an iterative task that begins by selecting appropriate DB_BLOCK_SIZE and DB_BLOCK_BUFFERS initialization parameters for the application being supported.
Note:
Oracle Database 10g Release 1 (10.1) or later VLM configurations do not support multiple database block sizes.
AWE_WINDOW_MEMORY, a new registry parameter specific to VLM, tells Oracle Database how much of its address space to reserve for mapping in database buffers. It defaults to a value of 1 GB, which should be suitable for most installations. If DB_BLOCK_SIZE is large, however, the default AWE_WINDOW_MEMORY value of 1 GB may not be sufficient to start the database.
Increasing the value of AWE_WINDOW_MEMORY will improve performance, but it will also limit the amount of memory available for other Oracle Database threads (like foreground threads). Clients may see "out of memory" errors if this value is set too large. As a general guideline, increase the AWE_WINDOW_MEMORY registry value by 20 percent.
For example, if DB_BLOCK_SIZE is set to 8 KB, AWE_WINDOW_MEMORY is set to 1 GB, and the number of LRU latches is set to 32 (16 processor computer), then database startup fails with out of memory errors 27102 and 34. Increasing the value of AWE_WINDOW_MEMORY to 1.2 GB fixes the problem.
Having a large cache in a VLM configuration may also slow down database writer (DBWR) threads. Having more DBWR threads will distribute work required to identify and write buffers to disk and will distribute I/O loads among threads. Initialization parameter DB_WRITER_PROCESSES enables you to configure multiple database writer threads.
A large cache can also introduce contention on the LRU (least recently used) latch. On symmetric multiprocessor (SMP) systems, Oracle Database sets the number of LRU latches to a value equal to one half the number of processors on the system. You can reduce contention on such configurations by increasing the number of LRU latches to twice (or four times) the number of processors on the system.
See Also:
Oracle Database Performance Tuning Guide for more information on instance tuning
Windows 4 GB RAM Tuning (4GT)
The following Windows operating systems include a feature called 4 GB RAM Tuning (4GT):
· Windows Server 2003
· Windows 2000 Advanced Server
· Windows 2000 Datacenter Server
This feature allows memory-intensive applications running on Oracle Database Enterprise Edition to access up to 3 GB of memory, as opposed to the standard 2 GB in previous operating system versions. 4GT provides a tremendous benefit: 50 percent more memory is available for database use, increasing SGA sizes or connection counts.
Large User Populations
Several features allow Oracle Database to support an increasingly large number of database connections on Windows:
· Oracle Database Shared Server Process, which limits the number of threads needed in the Oracle Database process, supports over 10,000 simultaneous connections to a single database instance.
· Oracle Net multiplexing and connection pooling features allow a large configuration to connect more users to a single database instance.
· Oracle Real Application Clusters raises connection counts dramatically by allowing multiple server computers to access the same database files, increasing the number of user connections by tens of thousands, as well as increasing throughput.
rgds
alan

Listener can not start

My listener in oracle 11GR2 can not start . when i want to give the status of that , the error in below is shown :
Connecting to > TNS-12541 : TNS:no listener
     TNS-12560 : TNS:protocol adapter error
          TNS-00511 : NO LISTENER
               64-bit Windowns Error : 61: Wnknown error
my tnsnames.ora is :
# tnsnames.ora Network Configuration File: D:\app\SHOJAIE\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)
ORCL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = SHOJAIE-PC)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = orcl)
and my listener.ora is :
# listener.ora Network Configuration File: D:\app\SHOJAIE\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = D:\app\SHOJAIE\product\11.2.0\dbhome_1)
      (PROGRAM = extproc)
      (ENVS = "EXTPROC_DLLS=ONLY:D:\app\SHOJAIE\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
      (ADDRESS = (PROTOCOL = TCP)(HOST = SHOJAIE-PC)(PORT = 1521))
ADR_BASE_LISTENER = D:\app\SHOJAIE
hepl me ? Thanks

"ServiceAliasException: Could not save Service Alias:
TNS-04415: File i/o error caused by: java.io.FileNotFoundException:
$PATH;ORACLE_HOME\network\admin\tnsnames.ora (The system cannot find the path specified)"
Your TNS_ADMIN setting is messed up.
$PATH is a Unix style environment variable reference - isn't going to work on Windows. I'm not even sure you can do a list of directories to search in the TNS_ADMIN variable.
Check the value set in HKLM/Software/Oracle/youroraclehomename ... Set it explicitly to the location of your tnsnames.ora file.
You normally don't need a listener.ora file at all ... Rename it and see what happens.

Help me! why can not start oracle management server?

maybe for my shutdown and startup database abnormal for several
times,now the server oracleorahome81management server can't start
and while i logon to enterprise manager console,it show me a
error as follow
"vtk-1002:The Oracle Management Server you are trying to connect
to is still in the process of initialization. Please wait for it
to start up completely and then try logging in again"
the error also when i restart my machine.
and,the configuration assistant can not logon to database.
but sql*plus,sql worksheet can work normal.

Hi,
Sock Hoon (guest) wrote:
: I have just installed Oracle Application Server (OAS) on my
: machine running Windows NT 4.0 Workstation. When I logon to the
OAS don't run on Win NT with installed service pack 4.
Go back to service pack 3 or apply patch from Developer 6.0 to
OAS.
: OAS manager and tried to start ORB, I got below error message:
: Please wait while the command is being processed on host ssoh_x
: YOT-11034, Unable to make address: IP://ssoh_x.jgfhome:2649.
: Error: YT::EXCEPTION::BADPARAM::NOSUCHADDR
: Starting ORB processes...Returning filename D:
: \orant\orb\admin\.event
: waiting for ORB to be ready...
: YOT-11034, Unable to make address: IP://ssoh_x.jgfhome:2649.
: Error: YT::EXCEPTION::BADPARAM::NOSUCHADDR
: ORB is not responding. Please restart manually...
: I have tried to re-install OAS for the second time. But I still
: got the same problem.
: I plan to use the OAS, together with Oracle Internet Commerce
: Server (ICS) to develop an e-commerce project. I am yet to
: download and install the ICS. I don't have any Oracle databases
: installed in my machine. I'm using MS SQL Server 7.0 instead.
: Please advised me on how to configure the ORB so that I'll be
: able to start the application server.
Best regards Andrew
null

Can not start/stop fullfilment server after fresh install

Can not start/stop fullfilment server after fresh install
Product: e-business suite (11.5.9)
Platform: Win XP 5.1 (SP2)
We have performed a new installation of ebusiness suite in our windows platform.
Installtion went with out any problem.
But we can not start/stop the fullfilment server. While trying to start/stop the server we are getting follwing error message:
c:\oracle11i\prodcomn\admin\scripts\PROD_03274019ih\jtffmctl.cmd start
script returned:
C:\oracle11i\prodcomn\admin\scripts\PROD_03274019ih>echo off
You are running jtffmctl.cmd
Mon 13/09/2004
01:46 PM
"Starting Fulfillment Server for "PROD" on port "9300" ...\n"
"Error returned while running OUI"
ERRORCODE = 1 ERRORCODE_END
.end std out.
Class not found: oracle.apps.jtf.fm.engine.processor.Processor
Please let us know how to fix this issue.
Regards, Kunal

edit the jtffmctl.cmd and make sure that it point to the correct java path, alse try to use java 1.4.1

Can't start the runInstaller for Oracle 8.1.7 on Red Hat 7.2 Linux

I can't start the runInstaller for Oracle 8.1.7 under Red Hat Linux 7.2 (enigma).
Please Help Me!

I have the same problem as you had,but my one is that after typing ./runInstaller it will terminate, when you run ps -ef | grep oracle , there are still some backend process running over there.
Does any one has experience to install Oracle8i on Linux? Pleae give us help.
Jeff

Oracle 10g on Windows 2003: Can't start with any account but Local System

Fresh install of Oracle 10g on Windows 2003. I install as a member of the local admin group and everything works great. The various services are starting as Local System, though, and I'd prefer to set them up to start as a specific domain user account.
When I make that change, however, I can't get any of the Oracle related services to start. I've added this domain user to the local ora_dba group on my server, given it the ability to log on as a batch job and log on as a service in the local security policy. Doesn't seem to help.
I saw a thread that implied using a domain user account wasn't supported (didn't seem right to me, but what the hell), so I created a local user account and tried that. Same result.
Something I'm missing?
Thanks.

What is missing, I suspect, is reading the installation docs.
http://docs.oracle.com
If that doesn't work then come back and ask specific requestions referencing the appropriate document and naming the actual version you are trying to install (ps 10g is a marketing name not a version number).

I can't start Oracle Services for MTS

Hello there, Oracle users!
I am new here, as new to the Oracle technology. We are developping a
software which must be transaction compliant, and we're on microsoft
platform, and thatswy we're using sql2000 and microsoft transaction
server for our application server components.
But one of our clients wants to use oracle 8i db as the resource manager. We had to make the proper work mts with oracle. I've red all of the oracle documentation within this topic, and i successfully installed
the Oracle Services for MTS on our development machine at the workplace.
(created the mts_proxy_info table, granted the specific roles to a specific db user, the specific privileges, and so on), and
it is working nicely, the log says "accepting new enlistment requests",
everything is wonderful.
But at the client, i repeated all of the steps (the only difference is,
that they have the server on a HP-UX machine instead of winnt and i had not access to the oracle server, i just gived the sql script to the oracle dba guy there (maybe he missed something?)), and when i wanted to start the oracle services for MTS on the Application server, the log says this: "incorrect password, or username". I really don't
undestand it, because i can connect through the OLEDB driver with the
specified username, password and Service name. (in a datalink (udl), for example)
If anybody had an idea i would be very happy
thanks in advance,
daniel szabo
ps: the app server config is:
nt 4.0 server
sp 6
option pack 2
iis 4
mts 2
script host 5.5
ie5

Daniel,
In pre-8.1.7.4.0 beta implementations, your application server e.g. IIS or MTX.EXE hosts MTS transactional components. When such components acquire OLEDB or ODBC connections to Oracle and external service setup for that database i.e. OracleMTSService<id> joins the MTS transaction on behalf of the Oracle database which quite often runs on a non-Windows platform e.g. Solaris. We restrict each database to have one and only such service. This brings in scalability and availability issues. In 8.1.7.4.0 we have embedded the transaction join and commit logic in the clientside dll. There is no OracleMTSService<id> for a given database. The only service needed is a recovery service one per Windows machine on which Oracle Svcs For MTS is installed. This service is automatically created on installation of the product and doesn't connect to the databases. Instead the involved databases connect to the service via HTTP to resolve any MTS-related transactions that are in-doubt.

Oracle 9i can't start install progress

Similar Messages

Maybe you are looking for