Oracle 9i DB Installation Problem on AIX 4.3.3

Hi,
I tried to install Oracle 9i DB on AIX 4.3.3 with Maintainence Level 9. However, I got the following error:
Calling action unixActions2.0.1.4.0 make
installMakePath = /usr/ccs/bin/make
installMakeFileName = /usr/opt/oracle/product/9.0.1/rdbms/lib/ins_rdbms.mk
installTarget = ioracle
undoMakeFileName =
installArguments = ORACLE_HOME=/usr/opt/oracle/product/9.0.1,
logFile = /usr/opt/oracle/product/9.0.1/install/make.log
undoTarget =
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target ioracle of makefile /usr/opt/oracle/product/9.0.1/rdbms/lib/ins_rdbms.mk
Exception Severity: 1
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target ioracle of makefile /usr/opt/oracle/product/9.0.1/rdbms/lib/ins_rdbms.mk
Exception Severity: 1
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target ioracle of makefile /usr/opt/oracle/product/9.0.1/rdbms/lib/ins_rdbms.mk
Exception Severity: 1
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target ioracle of makefile /usr/opt/oracle/product/9.0.1/rdbms/lib/ins_rdbms.mk
Exception Severity: 1
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target ioracle of makefile /usr/opt/oracle/product/9.0.1/rdbms/lib/ins_rdbms.mk
Exception Severity: 1
Can anyone know what is the problem here?
Thanks and hope to hear from you soon.
Nelson

Hi,
we have noticed the same error !!!!!!! :-(
doing the makefile statement by consolle we have:
"$ make -f rdbms/lib/ins_rdbms.mk ioracle
- Linking Oracle
rm -f /usr/oracle/product/9.0.1/rdbms/lib/oracle
ld -b64 -o /usr/oracle/product/9.0.1/rdbms/lib/oracle -L/usr/oracle/product/9.0.1/rdbms/lib/ -L/usr/oracle/product/9.0.1/lib/ -bbigtoc /usr/oracle/product/9.0.1/rdbms/lib/opimai.o /usr/oracle/product/9.0.1/rdbms/lib/ssoraed.o /usr/oracle/product/9.0.1/rdbms/lib/ttcsoi.o /usr/oracle/product/9.0.1/lib/nautab.o /usr/oracle/product/9.0.1/lib/naeet.o /usr/oracle/product/9.0.1/lib/naect.o /usr/oracle/product/9.0.1/lib/naedhs.o /usr/oracle/product/9.0.1/rdbms/lib/config.o -lserver9 -lodm9 -lskgxp9 -lclient9 -lvsn9 -lwtcserver9 -lcommon9 -lgeneric9 /usr/oracle/product/9.0.1/rdbms/lib/defopt.o -lknlopt -lslax9 -lpls9 -lplp9 -bE:/usr/oracle/product/9.0.1/rdbms/lib/plsqlncomp.exp -lserver9 -lclient9 -lvsn9 -lwtcserver9 -lcommon9 -lgeneric9 -lknlopt -lslax9 -lpls9 -lplp9 `cat /usr/oracle/product/9.0.1/rdbms/lib/nmliblist` /usr/oracle/product/9.0.1/rdbms/lib//jox.o -laurora -bE:/usr/oracle/product/9.0.1/rdbms/lib//oracle.exp -lwwg9 `sed -e 's/-ljava//g' /usr/oracle/product/9.0.1/lib/ldflags` -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnzjs9 -lnro9 `sed -e 's/-ljava//g' /usr/oracle/product/9.0.1/lib/ldflags` -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnzjs9 -lclient9 -lvsn9 -lwtcserver9 -lcommon9 -lgeneric9 -lwtcserver9 -lmm -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 `sed -e 's/-ljava//g' /usr/oracle/product/9.0.1/lib/ldflags` -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnzjs9 -lnro9 `sed -e 's/-ljava//g' /usr/oracle/product/9.0.1/lib/ldflags` -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnzjs9 -lclient9 -lvsn9 -lwtcserver9 -lcommon9 -lgeneric9 -lpls9 -ltrace9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lclient9 -lvsn9 -lwtcserver9 -lcommon9 -lgeneric9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lserver9 `if /bin/ar -X64 tv /usr/oracle/product/9.0.1/rdbms/lib/libknlopt.a | grep "kxmnsd.o" > /dev/null 2>&1 ; then echo " " ; else echo "-lordsdo9"; fi` -lctxc9 -lctx9 -lzx9 -lgx9 -lctx9 -lzx9 -lgx9 -lordimt9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lsnls9 -lunls9 -lld -lm `cat /usr/oracle/product/9.0.1/lib/sysliblist` -lm -bI:/usr/oracle/product/9.0.1/lib/pw-syscall.exp -bI:/usr/oracle/product/9.0.1/lib/ksms.imp
ld: 0711-317 ERROR: Undefined symbol: ksbdpt_
ld: 0711-317 ERROR: Undefined symbol: ksmsgl_
ld: 0711-317 ERROR: Undefined symbol: ktswh196_
ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information.
make: The error code from the last command is 8."
We hope in a fast solution.......
Thanks,
Daniele Tinti
Valerio Balbi

Similar Messages

Installation problem under AIX 5.3 with Oracle 10g

Hello,
I start an installation in AIX 5.3 machine with oracle 10. I install oracle 10.0 and pathes for oracle 10.2.0.2.0. I also install and all the interim patches through MOpatch utility. I also install the latest R3trans and R3load for unicode installation. But i have 4 errors under phase IMPORT ABAP. In this phase 33 packages completed succesfully. I have 4 packages with errors.
In ImportMonitor.Console.Log i have the following errors:
Import Monitor jobs: running 1, waiting 4, completed 33, failed 0, total 38.
Import Monitor jobs: running 2, waiting 3, completed 33, failed 0, total 38.
Import Monitor jobs: running 3, waiting 2, completed 33, failed 0, total 38.
Loading of 'SAPSSEXC_4' import package: ERROR
Import Monitor jobs: running 2, waiting 2, completed 33, failed 1, total 38.
Loading of 'SAPPOOL' import package: ERROR
Import Monitor jobs: running 1, waiting 2, completed 33, failed 2, total 38.
Loading of 'DOKCLU' import package: ERROR
Import Monitor jobs: running 0, waiting 2, completed 33, failed 3, total 38.
Import Monitor jobs: running 1, waiting 1, completed 33, failed 3, total 38.
Loading of 'SAPCLUST' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 33, failed 4, total 38.
Inside SAPSSEXC_4.log i have the following errors:
/usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130102907
/usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4
Compiled Oct 20 2007 02:05:46
/usr/sap/BEQ/SYS/exe/run/R3load -i SAPSSEXC_4.cmd -dbcodepage 4102 -l SAPSSEXC_4.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: T512CLU deleted/truncated #20071130102908
myCluster (63.20.Imp): 655: error when retrieving table description for physical table T512CLU.
myCluster (63.20.Imp): 656: return code received from nametab is 2
myCluster (63.20.Imp): 299: error when retrieving physical nametab for table T512CLU.
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130102908
Under SAPPOOL i have:
usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130102907
/usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4
Compiled Oct 20 2007 02:05:46
/usr/sap/BEQ/SYS/exe/run/R3load -i SAPPOOL.cmd -dbcodepage 4102 -l SAPPOOL.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: ATAB deleted/truncated #20071130102908
failed to read short nametab of table AT01                           (rc=2)
(CNVPOOL) conversion failed for row 0 of table VARKEY = ã ±ã ±ã °â â â â â â â â â â â â â â â â â â â â â â
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130102908
I read notes 421554 and 898181 i execute the directions from the notes to change the R3load and R3trans.
Do you have any idea how can i procceed with the errors?
Thank you in advance
Thanasis Porpodas

Hi,
look at sap note 921593 and search for myCluster ,
read that section following is a part of that note.
Symptom:
During the import into a UNICODE system the following error occurs
(for example in the SAPCLUST.log):
myCluster (63.2.Imp): 2085: (Warning:) inconsistent field names(source): physical field K1N05 appears as logic K1N5.
myCluster (63.2.Imp): 2086: (Warning:) further investigation recommended
myCluster (63.2.Imp): 1924: error when checking key field consistency for logic table TACOPC    .
myCluster (63.2.Imp): 1927: logic table is canonical.
myCluster (63.2.Imp): 1930: received return code 2 from c3_uc_check_key_field_descr_consistency.
myCluster (63.2.Imp): 1224: unable to retrieve nametab info for logic table TACOPC    .
myCluster (63.2.Imp): 8032: unable to acquire nametab info for logic table TACOPC    .
myCluster (63.2.Imp): 2807: failed to convert cluster data of cluster item.
myCluster: CLU4       *00001*
myCluster (63.2.Imp): 319: error during conversion of cluster item.
myCluster (63.2.Imp): 322: affected physical table is CLU4.
(CNV) ERROR: code page conversion failed              rc = 2
|
|                              RSCP - Error
| Error from:            Codepage handling (RSCP)
| code: 128 RSCPENOOBJ   No such object
| Dummy module without real rscpmc[34]
| module: rscpmm no:    2 line:    75          T100: TS008
| TSL01: CPV p3: Dummy-IPC   p4: rscpmc4_init
`----
Cause:
This problem is caused by incorrect data which should have been removed from the source system before the export.
Solution:
There are two possible workarounds:
      1. Modify DDL<dbs>.TPL (<dbs> = ADA, DB2, DB4, DB6, IND, MSS, ORA) BEFORE the R3load TSK files are generated;
              search for the keyword "negdat:" and add "CLU4" and "VER_CLUSTR" to this line.
      2. Modify the TSK file (most probably SAPCLUST.TSK) BEFORE R3load import is (re-)started;
              search for the lines starting with "D CLU4 I" and "D VER_CLUSTR I" and change the status (i.e. "err" or "xeq") to "ign" or remove the lines.

Installation problem on AIX ( SAP4.7, Oracle-9i)

Hello Gurus,
We are installaing SAP4.7 on AIX with oracle-9i as an database
we have completed central instance successfully, while database instance we are facing error
I am attaching error log for your referenec
error log
You entered: /sapcd/oracle9/51030360/ORA92_1
Found the label ORACLE:9.2:RDBMS(1/4):Oracle RDBMS AIX5 CD:CD51018585_1 but need
the label ORACLE:9.2.0:RDBMS(1::
Can any body help me regarding this error.
Thanks & regards
Shishir

> You entered: /sapcd/oracle9/51030360/ORA92_1
> Found the label ORACLE:9.2:RDBMS(1/4):Oracle RDBMS AIX5 CD:CD51018585_1 but need
> the label ORACLE:9.2.0:RDBMS(1::
Are the CDs numbers matching to your installation master CD?
Markus

Oracle 12c ASM Disk Problem on AIX

Hi All,
We need to install 12.1.0.2 DB with ASM option on AIX 7.1. When we start to install 12.1.0.2 grid installation, in the 3.step we could not show adding Candidate disks to ASM. Disks right are 660 and oracle:oinstall ownership.
When we start to install 11gR2 installation on same platform we can see the Candidate Disk, and We can install 11gR2 ASM+DB on same platform. But for 12.1.0.2 is not.
How can we add Candidate Disks to 12c ASM İnstallation for below step ? The disks which is not shown for this step are like below. After first error I have changed disks' ownership like oracle:asmadmin, it isn't solved. I need urgent help.

Hi Sve,
Thanks for replying me. What you have written are tried but not works. I have solved problem.
The problem is related AIX platform. I have Solved problem with below steps.
1- I have installed grid infrastructure with Software Only option.
2- After install Software Only Standalone Grid, I have tried to install manually ASM instance. But I have taken this error. rtld: 0712-001 Symbol CreateIoCompletionPort was referenced and it is solved with this MOSC ID: Doc ID1949184.1)
3- After Successfull 2.step you can now install ASM manually from asmca.

ODI Lightweight Designer Installation Problem on AIX

Hi guys,
I have installed oracledilwd on OAS 10.1.3.1.0 and encountered a problem while accessing the same.
The installation for ODI 10.1.3.5 has been done on IBM AIX 5.2 and the deployement of oracledilwd.war on the OAS instance.
the master and work repositories have been crated as weel as the data sources.
I have got the metadata navigator working but although the Lightweight designer got successfully deployed the .war file for the same yet when i test the lwd application i am returned "HTTP 500 - Internal server error" and on checking the ascontrol.log file
This is what i get..
*WARN jmx.JMXUserManager _store.319 - Exception received during persist user info.*
com.phaos.ASN1.ASN1FormatException: java.lang.ArrayIndexOutOfBoundsException
at com.phaos.cert.PKCS12Safe.input(PKCS12Safe)
at com.phaos.cert.PKCS12Safe.<init>(PKCS12Safe)
at com.phaos.cert.PKCS12.input(PKCS12)
at com.phaos.cert.PKCS12.<init>(PKCS12)
at oracle.security.pki.OracleKeyStoreSpi.b(OracleKeyStoreSpi)
at oracle.security.pki.OracleSecretStore.setStoreInWallet(OracleSecretStore)
at oracle.security.pki.OracleWallet.setSecretStore(OracleWallet)
at oracle.sysman.ias.studio.jmx.SecureWalletManager.setEntry(SecureWalletManager.java:129)
at oracle.sysman.ias.studio.jmx.JMXUserManager._store(JMXUserManager.java:307)
at oracle.sysman.ias.studio.jmx.JMXUserManager.setCredential(JMXUserManager.java:250)
Can you guys give any insight regards to the same, am not having any clue.
Cheers
Dhrubo
Edited by: Dhrubo C on Aug 28, 2009 8:02 PM

Hi Dhrubo,
May be this is an issue with the JVM(IBM).Check Once.
Thanks,
katukota

Oracle 10g R2 installation problem in HP-UX Itanium 11.23 64 bit

platform desc:
HP-UX 64 bit Itanium 11.23
Oracle 10.2
I fulfill all the prerequisites (environment setup, kernel parameter update properly, user/group creation properly).
But while i'm starting the ./runInstaller then I got error which i cant define whats the problem.
{font:'Courier New'}{color:#4f81bd}$whoami{color}{font}
{font:'Courier New'}{color:#4f81bd} oracle
{color}{font}{font:'Courier New'}{color:#1f497d} {color}{font}
{font:'Courier New'}{color:#1f497d} {color}{font}
{font:'Courier New'}{color:#4f81bd}$ ./runInstaller{color}{font}
{font:'Courier New'}{color:#4f81bd}Starting Oracle Universal Installer...{color}{font}
{font:'Courier New'}{color:#4f81bd} {color}{font}
{font:'Courier New'}{color:#4f81bd}Checking installer requirements...{color}{font}
{font:'Courier New'}{color:#4f81bd} {color}{font}
{font:'Courier New'}{color:#4f81bd}Checking operating system version: must be B.11.23. Actual B.11.23{color}{font}
{font:'Courier New'}{color:#4f81bd} Passed{color}{font}
{font:'Courier New'}{color:#4f81bd} {color}{font}
{font:'Courier New'}{color:#4f81bd}Checking swap space: must be greater than 250 MB. Actual 4095 MB Passed{color}{font}
{font:'Courier New'}{color:#4f81bd}Checking Temp space: must be greater than 250 MB. Actual 2527 MB Passed{color}{font}
{font:'Courier New'}{color:#4f81bd} {color}{font}
{font:'Courier New'}{color:#4f81bd}All installer requirements met.{color}{font}
{font:'Courier New'}{color:#4f81bd} {color}{font}
{font:'Courier New'}{color:#4f81bd}Preparing
to launch Oracle Universal Installer from
/tmp/OraInstall2009-01-27_01-38-40PM. Please wait ...$ Unhandled signal
occurred at 0x60000000c7c66780{color}{font}
{font:'Courier New'}{color:#4f81bd}SIGSEGV 11* segmentation violation{color}{font}
{font:'Courier New'}{color:#4f81bd} si_signo [11]: SIGSEGV 11* segmentation violation{color}{font}
{font:'Courier New'}{color:#4f81bd} si_errno [0]: Error 0{color}{font}
{font:'Courier New'}{color:#4f81bd} si_code [2]: SEGV_ACCERR [addr: 0x0]{color}{font}
{font:'Courier New'}{color:#4f81bd} {color}{font}
{font:'Courier New'}{color:#4f81bd} {color}{font}
{font:'Courier New'}{color:#4f81bd}Aborting...{color}{font}
{font:'Courier New'}{color:#4f81bd} {color}{font}
{font:'Courier New'}{color:#4f81bd} {color}{font}
{font:'Courier New'}{color:#4f81bd}****************{color}{font}
{font:'Courier New'}{color:#4f81bd}Another exception has been detected while we were handling last error.{color}{font}
{font:'Courier New'}{color:#4f81bd}Dumping information about last error:{color}{font}
{font:'Courier New'}{color:#4f81bd}ERROR REPORT FILE = (N/A){color}{font}
{font:'Courier New'}{color:#4f81bd}PC = c7c66780{color}{font}
{font:'Courier New'}{color:#4f81bd}SIGNAL = 11{color}{font}
{font:'Courier New'}{color:#4f81bd}FUNCTION NAME = (N/A){color}{font}
{font:'Courier New'}{color:#4f81bd}OFFSET = 0xFFFFFFFF{color}{font}
{font:'Courier New'}{color:#4f81bd}LIBRARY NAME = (N/A){color}{font}
{font:'Courier New'}{color:#4f81bd}Please check ERROR REPORT FILE for further information, if there is any.{color}{font}
{font:'Courier New'}{color:#4f81bd}Good bye.{color}{font}
Pls help...
Shafiul.

A simple search on metalink....
Oracle Universal Installer Terminates with SIGSEGV 11* Segmentation Violation
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=155649.1
Note 43507.1 ALERT:HP-UX: Patch Levels Advised

Oracle 10g XE installation problem on Ubuntu Linux, Oracle will not start

Hi,
After installing the pakages the error is when I call sqlplus and login as SYS :-
oracleXE: error while loading shared libraries: libaio.so.1: cannot open shared object file: No such file or directory
ERROR:
ORA-12547: TNS:lost contact
What I have done:-
My system is 64 bit AMD.
I installed .deb package on Ubuntu 9.04 server. I installed the following packages.
1.     ibc6-i386
2.     libaio_0.3.104-1_i386.deb
3.     bc
4.     oracle-xe-universal_10.2.0.1-1.1_i386.deb.
The Oracle processes do not start after running /etc/init.d/oracle-xe start.
I can tnsping from the local machine.
dpkg -l |grep libaio gives the following:
ii libaio1 0.3.107-3ubuntu1 Linux kernel AIO access library - shared lib

I have been running XE on 9.04 (32bit on my laptop - 64bit on my workstation) and both works fine. I had no problem installing. I followed the directions in documents I found on Ubuntu forums and also google. The document I used to install on 64bit was from http://littlebrain.org
I remember using
dpkg -i --force-architecture libaio1_0.3.107-1ubuntu1_i386.deb
dpkg -i --force-architecture libaio-dev_0.3.107-1ubuntu1_i386.deb
dpkg -i --force-architecture libaio1-dbg_0.3.107-1ubuntu1_i386.deb
dpkg -i --force-architecture oracle-xe_10.2.0.1-1.0_i386.deb
and then I used the ./oracle-xe configure as root, the installation was ok - and I have even updated the APEX version to 3.2.1 on the XE installation running on my 64bit Ubuntu 9.04
hope this proves useful
R/ Zafer

Oracle 9i PE Installation problem on XP

I am using Windows XP Pro on a 1.8GHz PC, with 80G hard drive.
I downloaded Oracle 9i, unzipping to 3 folders, and began installation of the Personal Edition.
The first disk installed without problems. However, when directed to the folder labeled Disk 2, it could find none of the files, even though those files are clearly visible in the folder.
The log entry is:
Starting install install phase 1 of component Oracle Complete DSS Starter Database
Calling action fileActions2.0.1.7.0 finalClusterSetup
     selectedNodes =
     threadsActive = 2
     vectorInitialSize = 50
     vectorFactorSize = 25
Calling action fileActions2.0.1.7.0 copyGroupFromJar
     selectedNodes = null
     copyGroup = complete_dss
     permissions = null
     owner = null
     group = null
     copyAsText = null
     JarLoc = C:\Disk 2\/Components/oracle.rdbms.seeddb.compdss/9.0.1.0.1/1/DataFiles/complete_dss.0.0.jar
     gpEntries = [[Data_Warehouse.dfj ->%ORACLE_HOME%/assistants/dbca/templates/Data_Warehouse.dfj 293242827 plats=0=>[912,615,50,453,601,173,467,295,87,610,198,918,913,162,2,46,30,21,10021,111,90,168,888] langs=0=>[en,fr,ar,bn,pt_BR,bg,fr_CA,ca,hr,cs,da,nl,ar_EG,en_GB,et,fi,de,el,iw,hu,is,in,it,ja,ko,es,lv,lt,ms,es_MX,no,pl,pt,ro,ru,zh_CN,sk,sl,es_ES,sv,th,zh_TW,tr,uk,vi]]
     DllGroup = false
Exception thrown from action: copyGroupFromJar
Exception Name: FileNotFoundException_name
Exception String: File not found C:\Disk 2\/Components/oracle.rdbms.seeddb.compdss/9.0.1.0.1/1/DataFiles/complete_dss.0.0.jar
Exception Severity: 2
Exception thrown from action: copyGroupFromJar
Exception Name: FileNotFoundException_name
Exception String: File not found C:\Disk 2\/Components/oracle.rdbms.seeddb.compdss/9.0.1.0.1/1/DataFiles/complete_dss.0.0.jar
Exception Severity: 2
Exception thrown from action: copyGroupFromJar
Exception Name: FileNotFoundException_name
Exception String: File not found C:\Disk 2\/Components/oracle.rdbms.seeddb.compdss/9.0.1.0.1/1/DataFiles/complete_dss.0.0.jar
Exception Severity: 2
Exception thrown from action: copyGroupFromJar
Exception Name: FileNotFoundException_name
Exception String: File not found C:\Disk 2\/Components/oracle.rdbms.seeddb.compdss/9.0.1.0.1/1/DataFiles/complete_dss.0.0.jar
Exception Severity: 2
Exception thrown from action: copyGroupFromJar
Exception Name: FileNotFoundException_name
Exception String: File not found C:\Disk 2\/Components/oracle.rdbms.seeddb.compdss/9.0.1.0.1/1/DataFiles/complete_dss.0.0.jar
Exception Severity: 2
Exception thrown from action: copyGroupFromJar
Exception Name: FileNotFoundException_name
Exception String: File not found C:\Disk 2\/Components/oracle.rdbms.seeddb.compdss/9.0.1.0.1/1/DataFiles/complete_dss.0.0.jar
Exception Severity: 2
Exception thrown from action: copyGroupFromJar
Exception Name: FileNotFoundException_name
Exception String: File not found C:\Disk 2\/Components/oracle.rdbms.seeddb.compdss/9.0.1.0.1/1/DataFiles/complete_dss.0.0.jar
Exception Severity: 2
*** Cancel Dialog: ***
User selected: Stop installation of all products.
File not found C:\Disk 2\/Components/oracle.rdbms.seeddb.compdss/9.0.1.0.1/1/DataFiles/complete_dss.0.0.jar
Unable to read C:\Program Files\Oracle\Inventory/Contents/OracleHomesList.ser. Some inventory information may be lost.
Unable to read C:\Program Files\Oracle\Inventory/Contents/LibsList.ser. Some inventory information may be lost.
What can be going wrong here? What do I do to fix it?
Thank you,
Fred Corbett

I am using Windows XP Pro on a 1.8GHz PC, with 80G hard drive.
I downloaded Oracle 9i, unzipping to 3 folders, and began installation of the Personal Edition.
The first disk installed without problems. However, when directed to the folder labeled Disk 2, it could find none of the files, even though those files are clearly visible in the folder.
The log entry is:
Starting install install phase 1 of component Oracle Complete DSS Starter Database
Calling action fileActions2.0.1.7.0 finalClusterSetup
     selectedNodes =
     threadsActive = 2
     vectorInitialSize = 50
     vectorFactorSize = 25
Calling action fileActions2.0.1.7.0 copyGroupFromJar
     selectedNodes = null
     copyGroup = complete_dss
     permissions = null
     owner = null
     group = null
     copyAsText = null
     JarLoc = C:\Disk 2\/Components/oracle.rdbms.seeddb.compdss/9.0.1.0.1/1/DataFiles/complete_dss.0.0.jar
     gpEntries = [[Data_Warehouse.dfj ->%ORACLE_HOME%/assistants/dbca/templates/Data_Warehouse.dfj 293242827 plats=0=>[912,615,50,453,601,173,467,295,87,610,198,918,913,162,2,46,30,21,10021,111,90,168,888] langs=0=>[en,fr,ar,bn,pt_BR,bg,fr_CA,ca,hr,cs,da,nl,ar_EG,en_GB,et,fi,de,el,iw,hu,is,in,it,ja,ko,es,lv,lt,ms,es_MX,no,pl,pt,ro,ru,zh_CN,sk,sl,es_ES,sv,th,zh_TW,tr,uk,vi]]
     DllGroup = false
Exception thrown from action: copyGroupFromJar
Exception Name: FileNotFoundException_name
Exception String: File not found C:\Disk 2\/Components/oracle.rdbms.seeddb.compdss/9.0.1.0.1/1/DataFiles/complete_dss.0.0.jar
Exception Severity: 2
Exception thrown from action: copyGroupFromJar
Exception Name: FileNotFoundException_name
Exception String: File not found C:\Disk 2\/Components/oracle.rdbms.seeddb.compdss/9.0.1.0.1/1/DataFiles/complete_dss.0.0.jar
Exception Severity: 2
Exception thrown from action: copyGroupFromJar
Exception Name: FileNotFoundException_name
Exception String: File not found C:\Disk 2\/Components/oracle.rdbms.seeddb.compdss/9.0.1.0.1/1/DataFiles/complete_dss.0.0.jar
Exception Severity: 2
Exception thrown from action: copyGroupFromJar
Exception Name: FileNotFoundException_name
Exception String: File not found C:\Disk 2\/Components/oracle.rdbms.seeddb.compdss/9.0.1.0.1/1/DataFiles/complete_dss.0.0.jar
Exception Severity: 2
Exception thrown from action: copyGroupFromJar
Exception Name: FileNotFoundException_name
Exception String: File not found C:\Disk 2\/Components/oracle.rdbms.seeddb.compdss/9.0.1.0.1/1/DataFiles/complete_dss.0.0.jar
Exception Severity: 2
Exception thrown from action: copyGroupFromJar
Exception Name: FileNotFoundException_name
Exception String: File not found C:\Disk 2\/Components/oracle.rdbms.seeddb.compdss/9.0.1.0.1/1/DataFiles/complete_dss.0.0.jar
Exception Severity: 2
Exception thrown from action: copyGroupFromJar
Exception Name: FileNotFoundException_name
Exception String: File not found C:\Disk 2\/Components/oracle.rdbms.seeddb.compdss/9.0.1.0.1/1/DataFiles/complete_dss.0.0.jar
Exception Severity: 2
*** Cancel Dialog: ***
User selected: Stop installation of all products.
File not found C:\Disk 2\/Components/oracle.rdbms.seeddb.compdss/9.0.1.0.1/1/DataFiles/complete_dss.0.0.jar
Unable to read C:\Program Files\Oracle\Inventory/Contents/OracleHomesList.ser. Some inventory information may be lost.
Unable to read C:\Program Files\Oracle\Inventory/Contents/LibsList.ser. Some inventory information may be lost.
What can be going wrong here? What do I do to fix it?
Thank you,
Fred Corbett

Oracle 7.3 Installation Problem on Win2000

Dear all,
Can I install Oracle 7.3 Client on win2000?
I can only install Oracle Server beoz the installer recognize
win2000 as NT server.
Thanks !

Oracle 7.3 will not work on Win2000. I tried this some time ago
and had a multitude of problems. So I now use Oracle8i on
Win2000. 7.3 is not certified for Win2000.
Martin

Oracle 10.2 installation problem.

hai all,
I am instllaling oracle 10.2 in windows 2003 server additon.
I had problem with installation that, when the installation wizard approaches to 28%, it is showing running, continuously running but doesn't move from 28%.
It is taking more than one hour but couldn't go further. I cant find anything wrong from logs. what can i do now? can any body suggest me. I will be greatful to u.
i am using windows 2003 server addition.
1GB RAM, 3GHz Processor.

No "hidden" boxes that awaits a response? (try circling with alt tab)
Did you perform all pre-reqs? Did you check all install and dbca logs?
Which edition of Windows 2003 Server?

Installing Oracle EBS 11i installation problem

Dear All,
I have a problem regarding the installation of Oracle EBS 11i of which I can't figure out a solution.
After unzipping all the 108 files during the rapidwiz installation the installer seems to halt (in step 1, 100% of file extraction). It involves instconf.drv but it doesn't show me an error in the installation logs. The line that appears is the following:
instantiatefile -d instconf.drv
I tried to change my Linux distribution from SLES10 to Ubuntu but that doesn't work either.
Could you please help me out with this.
Kind regards,
Charif Ennaciri

Dear hsawwan,
I checked the log file and it's full of lines similar like:
AC-50402: Exception: java.lang.NullPointerException
Raised by oracle.apps.ad.autoconfig.InstantiateFile
instantiate file:
source : /d01/oracle/visdb/9.2.0/appsutil/template/oui/bin/addNode.sh
dest : /d01/oracle/visdb/9.2.0/oui/bin/addNode.sh
backup : /d01/oracle/visdb/9.2.0/oui/bin/addNode.sh to /d01/oracle/visdb/9.2.0/appsutil/out/VIS_server/04261350/addNode.sh
StackTrace:
java.lang.NullPointerException
     at oracle.apps.ad.autoconfig.InstantiateFile.instantiateTheFile(InstantiateFile.java:4019)
     at oracle.apps.ad.autoconfig.InstantiateFile.processDriverFile(InstantiateFile.java:2655)
     at oracle.apps.ad.autoconfig.InstantiateFile.<init>(InstantiateFile.java:1066)
     at oracle.apps.ad.autoconfig.InstantiateFile.<init>(InstantiateFile.java:951)
     at oracle.apps.ad.autoconfig.InstantiateFile.<init>(InstantiateFile.java:609)
     at oracle.apps.ad.autoconfig.InstantiateFile.doMain(InstantiateFile.java:1948)
     at oracle.apps.ad.autoconfig.InstantiateFile.main(InstantiateFile.java:2312)
AC-50402: Exception: java.lang.NullPointerException
Raised by oracle.apps.ad.autoconfig.InstantiateFile
instantiate file:
source : /d01/oracle/visdb/9.2.0/appsutil/template/oui/bin/ouica.sh
dest : /d01/oracle/visdb/9.2.0/oui/bin/ouica.sh
backup : /d01/oracle/visdb/9.2.0/oui/bin/ouica.sh to /d01/oracle/visdb/9.2.0/appsutil/out/VIS_server/04261350/ouica.sh
StackTrace:
java.lang.NullPointerException
     at oracle.apps.ad.autoconfig.InstantiateFile.instantiateTheFile(InstantiateFile.java:4019)
     at oracle.apps.ad.autoconfig.InstantiateFile.processDriverFile(InstantiateFile.java:2655)
     at oracle.apps.ad.autoconfig.InstantiateFile.<init>(InstantiateFile.java:1066)
     at oracle.apps.ad.autoconfig.InstantiateFile.<init>(InstantiateFile.java:951)
     at oracle.apps.ad.autoconfig.InstantiateFile.<init>(InstantiateFile.java:609)
     at oracle.apps.ad.autoconfig.InstantiateFile.doMain(InstantiateFile.java:1948)
     at oracle.apps.ad.autoconfig.InstantiateFile.main(InstantiateFile.java:2312)
What can I do about this?
Kind regards,
Charif

Oracle 9iAS infrastructure installation problem

Hello
I am installing oracle 9i infrastructure on my new windows 2000 box with 1GB RAM and no oracle product preinstalled. in the end of installation process, some processes fail:
infrastructure instance configuration assistant
oracle 9i application server randomize password
single sign on config assistance
infrastructure mod-osso config assistance
OPMN config assistance
log file says:
Configuration failed for IAS
IAS Instance creation failed
Configuration failed for JAZN
JAZN configuration failed: unable to establish a directory context.
Configuration succeeded for IASProperty
Configuration failed for IAS
Configuration failed for JAZN
and then SSO etc services dont start. can somebody please tell me how to fix this.
ashish

no. i had nothing installed over windows 2000 when i started installing oracle9i infrastructure.
the route problem(the point i could look into) is that the directory server(ldap) is not started during installation. is there any way we can reconfigure and start directory server after installation? as there is ssocfg.bat and ssoreg.bat for single sign-on..
ashish

URGENT - Oracle 9i, Oracle 9iAS, and Oracle 9iAS Portal Installation Problem

ERROR :
1. Objects with type JAVA CLASS with more than 30 characters are truncated to 30 characters
2. There are only 30 objects with type JAVA CLASS are installed (instead of 334) mentioned on the troubleshooting guide
3. Oracle9iASHttpService automatically stops after starting the service
Environment :
Windows 2000 Server
Oracle 9i 9.0.1.1.1
Oracle 9iAS 3.0.9.8.2 (Oracle 9iAS 1.0.2.2.2a)
PDK Services for Java version 3.0.9.0.4 (from Patch used to install 3.0.9.8.2)
Patches 8.1.7.1.1, 8.1.7.1.5, 3.0.9.8.2
I installed the Oracle 9i, 9iAS, Portal and the patches based on the installation instructions (http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/DOCUMENTATION/INSTALL_GUIDE_9I.PDF)
I tried adding the Sample Web Provider I got ORA-29531 error on HttpProviderDispatcher. Then I checked the Patch 8.1.7.1.1 installation, they are some scripts that need to be run that was not part of the 9i/9iAS installation instruction. I run the suggested scripts(catalog.sql, catproc.sql and utlrp.sql) and modified the jserv.properties to point the xsqlconfig.xml to ORACLE_HOME\oracore\admin.
The error still persisted. From the Troubleshooting PDK Services for Java, one of the suggestion is to run the sql command :
Select object_name, object_type, status from user_objects where object_name like '%HttpProvider%';
which resulted to an object with name '/3334f18_HttpProviderDispatche' without the 'r' at the end
and
Select count(object_name) from user_objects where object_type='JAVA CLASS';
which resulted to only 30 VALID object. According to the installation instruction, there are supposedly 334 objects.
I checked the object_name of the other JAVA CLASS objects, all the names of the objects are all less than 30 characters. It looks like that the objects with the object_name > 30 are truncated to 30 characters.
Then I rebooted the machine, when the machine went back on Oracle9iASHttpService stops automatically after it has been started.

I have posted question on that thread and there is no specific solution from our problem. From the Oracle PDK Troubleshooting PDK Services for Java, it looks like there is a problem on the Oracle Portal installation. I tried recompiling the packages and my problem worsened. Now I cannot start the Oracle9iAS HTTP Service.

Oracle-xe 10 installation problem on RHEL4

I installed the oracle xe RPM package on RHEL4. Apparently it succeeded. There were no errors reported and the package is installed.
However the GNOME menu doesn't match what the documentation would lead me to expect:
"On Linux, click the Application menu (on Gnome) or the K menu (on KDE), then point to Oracle Database 10g Express Edition, and then Go To Database Home Page."
No such menu item exists after installation on the GNOME menu. Perhaps someone can tell me what command line this menu item is supposed to invoke so that I might invoke it via the command line, or add a menu shortcut for it?

Take a look about all the items in the GNOME and KDE. In my GNOME menus Oracle XE is placed under item called "Other".
If you wish to start/stop and manage Oracle go to the "Services" and then look for a oracle-xe service.
From the command line you can do it with "/sbin/service oracle-xe start" and to stop it "/sbin/service oracle-xe stop".

OWB Installation problem on AIX 5.2

Hi,
We are trying to install OWB 9.2.0.2.8 on IBM AIX 5.2 using the download version from OTN. Following installation instructions, we have removed all references to existing ORACLE_HOME in the environment variables: CLASSPATH, PATH, LIBPATH and LD_LIBRARY_PATH.
When we try to run installer from owb92aix/Disk1/runInstaller
following error message appears: Can't find libjvm.a
and the installation aborts.
Any help is appreciated.
Thanks,
Aravind

Yes, we do have the java virtual machine installed in /usr/java131/jre/bin and it is referenced in PATH variable.
When we extracted the downloaded tar file for AIX, the file libjvm.a exists in the extracted directory. We do not know why the installer is unable to find it.
Thanks,
Aravind

Oracle 9i DB Installation Problem on AIX 4.3.3

Similar Messages

Maybe you are looking for