Oracle 9i download setup.exe problem

Downloaded and unzipped Disk1, Disk2, Disk3 per instructions, but when I try to run setup.exe, I get an hourglass for two seconds, then nothing happens at all. Running Win2k Pro.

We has a similar problem with 8.1.7. Is your machine a Pentium 4? If so, it may be similar to the problem we had.
The advice we got from Oracle support was as follows:
--There are known issues where Oracle Universal Installer(OUI) hangs on Pentium IV
--machines. Any Oracle Universal Installer 1.7.1.9.0 and earlier installation on a
--platform that uses the Intel Pentium 4 processor, with the Sun JRE and Symantec
--Just in Time Library (JIT) will encounter this problem. Windows NT is confirmed
--to be affected by this issue.
--Please refer to <Note:131299.1> which suggests three possible workarounds for
--this issue.
--Currently there is not a patched Installer available to deal with this problem.
--Hence I'm afraid one of the workarounds listed above has to be used.
You'll need to go to metalink to look at the note if this does apply.
Hope this helps,
Gary Mason

Similar Messages

  • Oracle 9iLite download setup.exe file does not work

    Like many people (I am discovering more by the minute), I am unable to install 9i Lite.5.01. When the setup.exe file is triggered, a hourglass appears for a second, then nothing...
    I am installing on a windows 2000 terminal server, therefore I have to go through (Control Panel) Add/Remove Programs. The Oracle Universal Installer says that setup.exe is either a directory or is corrupt.
    I have tried a couple of fixes suggested in this forum, such as unzipping the files to /install/disk, but to no avail. I have also tried downloading the software again, but with the same results.
    Is there anyone out there who has successfully overcome this problem ?

    Yes, there has been a problem reported with setup.exe on the Pentium 4 processor.
    To overcome the problem, copy the contents of the CD on to your hard drive.
    Then search for every occurence of the file symcjit.dll under the base directory where u have copied from your CD.
    and rename them to symcjit.old.
    Then launch setup.exe.
    This should take care of the problem

  • Oracle 9i download - setup.exe doesn't do anything

    I downloaded the three files for EE 9i, extracted to Disk1,2,3 etc. When I run setup.exe nothing happens. If I run setup.exe and watch task manager I see javaw.exe runs but then stops - there are no error messages, only ORA..... directories full of files left in temp.
    Does anyone know how to make this run?
    Thanks
    [email protected]
    - Server name NT
    - Filename ?
    - Date/Time Nov 18
    - Browser + Version IE 5.5 SP2
    - O/S + Version NT 4.0
    - Error Msg -Nil-

    Hi,
    Had the same problem with the Oracle 8.1.7 install. Try this:
    http://www.indiana.edu/~dms/databases/oracle/pentium_iv_bug_fix.htm
    It worked for me.
    Good luck!

  • Setup.exe problem in Oracle Developer Forms 10g in Windows XP

    Hi All,
    I have downloaded the below files for installing Developer Suit 10g from http://www.oracle.com/technetwork/developer-tools/developer-suite/downloads/101202winsoft-087370.html.
    1. ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
    2. ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
    I am installing it on Windows XP, Service Pack 3.
    However when I click on setup.exe file in disk1 folder, it does not execute.
    I went through the forums which discussed on problems related to execution of setup.exe on XP. Tried most of the things like Stopping the anti virus, run as administrator, rename the file, stop certain services , etc, but however this setup.exe does not run.
    I am able to run exe files of other applications. I am having 1GB RAM, 10GB free disk space on P4.
    Pl. suggest what could be the possible problem.
    regards,
    Baljeet

    Here are a couple of things to try:
    1. Make sure there are no spaces in the directory name where you unzipped the installer.
    2. As Pilgrim indicated, you must be an administrator on the workstation in order to run the installer.
    3. Verify you have a clean download: check the file size and/or CRC information to ensure the download is not corrupt.
    Craig...

  • Oracle 9.2 setup.exe won't run on P3 with Win2K SP3

    Hi, everyone:
    We had difficulty in installing Oracle 9.2 onto our Dell P3 Latitude C800 laptop running Win2K Professional with SP3. As many of you already reported, after double clicking "setup.exe", it won't run and nothing happened. We tried to run "autorun.exe" but that didn't work either. We also changed the system Temp/Tmp environment variables but no help either. Since our laptop is P3, not P4, not sure whether changing the symcjit.dll name would help.
    This seems to be a Java issue but not sure exactly what caused the problem. We had TrendMicro's OfficeScan AV s/w installed. Is that the problem? What other commonly used s/w are Java based and may cause conflict with Oracle installer? We only have MS Office, VisualBasic, UltraEdit, Acrobat, WinZip, and GetRight installed on the laptop.
    Are there any other suggestions for us to try? Your feedback will be greatly appreciated.
    Jason

    disable getright and try again

  • Office pro 2013 download: setup.exe "module could not be found"

    Have downloaded Microsoft Office Professional 2013 4 times. Takes about 7 minutes. Then when I click on setup.exe, the computer (windows 8.1) asks if I want to let Microsoft make changes to my computer (this is normal for a software download). I say yes
    and I get a popup that says "the specified module could not be found". You have other threads with this same notation but none seem to be with a software download so I am starting a new thread.
    This was downloaded from Microsoft Volume Licensing.  There was a note that I would need to download the Microsoft webapps something or other and I tried downloading that as well, but the download name was the same as the other download, and the
    outcome and resulting error message also were the same. 
    Concerned because no where was I asked for any license key or setup key or anything else.
    Any advice would be greatl welcomed.
    Thank you
    Eljayf

    Hi,
    A similar issue is addressed here, you can follow SpeakPeace’s reply to check if helpful.
    http://answers.microsoft.com/en-us/office/forum/office_2013_release-office_install/the-specified-module-could-not-be-found/92971d00-b54a-435d-829c-8b8d651f70c4
    When you download Office 2013 from the Volume License Service Center, it comes down as .ISO files.
    .ISO is not a file format that Windows can open natively.
    There are several possible options you can use to install the software:
    Use .ISO image file software to download and save the .ISO image file to a CD-R or a DVD-R.
    Virtually mount and access ISO files as a virtual device.
    Extract the .ISO files to your hard drive.
    For more detail reference:
    http://blogs.technet.com/b/odsupport/archive/2011/04/19/how-to-extract-the-contents-from-an-iso-file-without-burning-the-iso-to-disc.aspx
    You can run setup.exe as administrator then try the install.
    Feel free to post back.

  • Windows Downloaded setup.exe, not iso file.

    Well... I just recently bought windows 8, but it downloaded a file called windows8setup.exe -- not an iso. I don't have a windows machine to open the exe, so how can i get the windows iso?

    So i guess my question is: How can i get the windows8 iso from the setup.exe without having access to a windows computer.

  • B1_Sharing Folder Client setup .Exe Problem.

    Dear All,
    In my Server Client setup .Exe  it's not showing Under B1_Sharing Folder but last month i saw setup .exe. is it Corrupted  Beacuse of Virus in my server. is it true ? I need to Install Client Machines through Server B1_Sharing folder but when iam accessing through run it's not showing setup .exe for Client only not for DIAPI and in server also it's not showing for Client what i have to do  ? we need to Install SAP or is there any solution  Please Guide me. we are using SAP B1 2005B PL 40.
    Regds,
    Samapth Kumar Devunuri.

    Hi Samapth,
    There are so many possiblities that your setup exe file could be deleted by someone either in mistake or moved to somewhere else.
    You can search whole drive to find out if there are any copies in other place. If not, you can download it again from SAP portal.
    Thanks,
    Gordon

  • Trying to update Firefox and I downloaded setup.exe, but then nothing happened

    I currently have 3.0.19 version of Firefox and finally decided to update since this version crashes whenever you go to google maps. My automatic updater did not work (error message was just that it failed for an unspecified reason). I went to the mozilla website and clicked on the free download button. It then asked if I wanted to save the Firefox 7.0.1 setup.exe which I saved to my Mozilla folder. Then nothing happened. When I clicked on the link if nothing automatically happens it just asks if I want to save the same file. I've restarted, but still have the same old firefox version. Is there more I need to download, or do I have to run something?

    Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
    *Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
    *Firefox 9.0.x: http://www.mozilla.com/en-US/firefox/all.html
    *Trash the current Firefox application to do a clean (re-)install
    *Install the new version that you have downloaded
    Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup

  • Can't execute setup.exe on PDA

    hi, i'm testing simple example with Oracle817 and 9i lite database..
    my problem is that i can't execute setup.exe on my PDA...
    i packaged new application by only importing scott.emp tabale with wtgpack.exe
    then i set user priviledge and parameter in the mobile server control center web page..
    i downloaded mobile client for wince on strong arm cpu...
    while i packaged mobile application there was no exception or error messages..
    but i can't execute downloaded setup.exe file for installing mobile client.. though..
    only it's not proper wince application sign can be seen on PDA..
    PDA that i use is with strong arm sa-1100 cpu and windows CE 3.0(build 126)..
    but it's not compaq or any other well known product though..
    anyway.. anyone had this kinda situation..?
    please help me out..
    thank your in advance..

    When I turned my computer on I had the setup.exe shortcut on my desktop (0 bytes), and can't delete it.
    good lord. this is precisely the second time i've ever seen this reported. (the other chap i saw with this ended up with two such icons on his desktop, if i remember correctly.)
    Katrina: am i remembering this correctly?
    what eventually worked for him was downloading and installing a copy of Pocket Killbox, which he eventually managed to use to get rid of the beasts.
    keep us posted.
    love, b

  • Error while running setup.exe for oracle installation on windows 2003

    Hi,
    I am trying to install oracle 9.2.0.1 on my windows 2003 machine and when i click on setup.exe nothing happens. when i tried to run it thru command prompt again nothing happens when i check in computer management => event views it throws following error.
    The application, C:\DOCUME~1\barb\Local Settings\Temp\1\OraInstall2006-08-11_05-19-46AM\jre\bin\javaw.exe, generated an application error The error occurred on 08/11/2006 @ 05:19:56.356 The exception generated was c0000005 at address 6D4CF9A0 (jvm!JVM_TraceMethodCalls)
    can anybody suggest me what could be the problem or i will have to install jvm first and then try installing oracle?
    thanks
    Chandan

    did you check the installation guide and Preinstallation Requirements?
    http://download-west.oracle.com/docs/cd/B19306_01/install.102/b14316/reqs.htm#i1011417

  • Downloaded Discoverer4.1: can't install (setup.exe won't run)

    Hi,
    Just downloaded Discoverer 4.1 (admin4133f.zip) and unzip files in directory c:\temp (along with Oracle Forms and Report and Oracle 8i zip files) but whenever i run setup.exe nothing happens.
    I've already got Oracle Personal Edition 8i and Developer 6i installed in my pc.
    thanks

    I've already got Oracle Personal Edition 8i and Developer 6i installed in my pc.
    ^^^^^^^^^^^^^^
    I've eccounted the similar installation problem - Oracle Discoverer installation at the OracleHome that already has Oracle Reports lead to setup.exe fail. This is noted since Discoverer 3.1.+ and Reports 3+
    Try to install Discoverer into another OracleHome.
    If installing in the same Home - Discoverer must be the first, Reports - the second...
    (By the way - watch for the 9iAS EE installation - you'll see Discoverer goes first :) )

  • Oracle 9iDS download problem

    So that we may better diagnose DOWNLOAD problems, please provide the following information.
    - Server name
    - Filename
    - Date/Time
    - IE ver 6.0
    -winXP
    I have downloaded oracle 9iDS using GETITRIGHT , unzipped it but SETUP.EXE from disk1 doesn't run !
    Does any one have a clue?
    Thanks for your help.

    Hi there,
    I am having trouble with disk1 and disk2 as well. The download finishes well but afterwards the files on disk are corrupt.
    What's wrong?

  • Oracle 11g R2 Install on Windows 7 64 bit setup.exe does not work.

    Hi
    I am trying to install Oracle 11g R2 on my Windows 7 Ultimate 64 bit. When I execute setup.exe as Administrator the command window flashes and exits. I could not even see what the message is. Also tried command prompt. Can anyone help me resolve this issue?
    Appreciate your support.
    Regards

    user1484609 wrote:
    Installation Successful after executing the install from C:\temp and not within users. Even if you execute as Admin Oracle Install does not have access to the folders in C:\Users...
    Finally the install is successful.Congratulations.
    And thank you for posting your solution. The security issue was quite a surprise to me as well, although it ties into a PC World article I read today.
    To continue, please make sure you have a static IP address. If your system uses DHCP, that may mean setting up Loopback Adapter, configuring a static IP address other than 127.0.0.1 for that (for example you can use 192.168.123.101), and updating C:\windows\system32\drivers\etc\hosts. (note - no 3 char 'type on the hosts file) to include an entry like '192.168.123.101 myhost.example.com myhost', and perhaps setting your ORACLE_HOSTNAME variable. This is all described well in the Install documentaiton at http://download.oracle.com/docs/cd/E11882_01/install.112/e10843/reqs.htm#BABIAEEC

  • I am trying to reinstall Windows on my macbook pro.  I downloaded the support files and Windows 7 iso file to a USB drive.  However, when I try to run the setup.exe program I get the message "this program cannot be run in DOS mode."

    I am trying to reinstall Windows (would not launch).  I removed the partition and started over.  I downloaded the support files and Windows 7 iso file to a USB drive.  However, when I try to run the setup.exe program I get the message "this program cannot be run in DOS mode."  I was successful before, what am I doing wrong this time?

    Try a restart.
    If that doesn't fix the problem, shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application unistaller. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode
    Safe Mode - About
    General information.
    Isolating issues in Mac OS X
    Troubleshooting Permission Issues
    Step by Step to Fix Your Mac

Maybe you are looking for