Oracle 9i in windows vista

Dear all,
I am trying to install oracle 9i release 1 into a laptop running windows vista. the installation is very very slow and terminate with an error.
Is Vista not compatible with oracle 9i? What if i install oracle 10g in windows vista?
Please someone to assist me.
Thanks in advance

Windows vista doesn't seem to be worried about old software, and oracle doesn't seem to be worried about upgrading old software. Oracle 9iR1 is not supported for Windows Vista, the only supported and certified version is 10gR2 specific for windows vista (10.2..0.3.0). For further references on certification, check the certification matrix here --> https://metalink.oracle.com/metalink/certify/certify.istore_welcome
~ Madrid

Similar Messages

  • Oracle XE on Windows Vista beta 2

    Production release of XE on Vista beta 2 runs fine.
    http://prpi.blogspot.com/2006/06/oracle-xe-on-windows-vista-beta-2.html

    Hi tom,
    So what your saying is that if i really need to run
    oracle9i on my vista home premium i should just go
    ahead and dual boot my laptop with MS windows XP?You must use a certified OS, 9i has never been supported for windows vista, and most probably it won't be supported. If you want to install an RDBMS you should install at least 10.2.0.3.0, as stated on my previous post.
    Vista would just be a host opertating system, in case of using Virtual Machine Software, if you are planning to install 9iR2, and use a certified OS as listed in the [https://metalink.oracle.com/metalink/certify/certify.istore_welcome]Oracle Certify Matrix
    ~ Madrid
    http://hrivera99.blogspot.com/
    Message was edited by:
    Madrid

  • Istalling oracle 11g on windows vista

    Hi,
    i need to install oracle 11g on windows vista, unfortunately i cannot able do to that, becase after double cliking on the setup a messege like this one came out:
    OUI-10151: There was an error while loading library.generalQueries. Stop installation of all products, Stop installation on this component.
    I've found on internet some work around of this problem BUT only on linux machine, no one as telling me some way to fix my problem on windows vista.
    I also tried using oui to deinstall any previews installed version but oiu tell me that there's not any installation of oracle.
    any suggest is really appreciate
    regards
    Francesco

    By 11g I am assuming you mean 11.1.0.6 (11gR1). Pl post which Vista version you are using - 11gR1 is certified to be installed only on Business, Enterprise, and Ultimate editions.
    http://download.oracle.com/docs/cd/B28359_01/install.111/b32006/reqs.htm#CHDHGGFE
    HTH
    Srini

  • Install Oracle 9i on Windows Vista Home Premium

    I have a problem Installing Oracle 9i on Windows Vista Home Premium, I cant install it because it throws me an error message saying that is incompatible with my version of Windows. It is possible to install it with some patch or something??
    Message was edited by:
    user599646

    The only patch I know of is called Windows XP.
    In case you have not done any internet searches on this, even Oracle Database 10g was not compatible with Vista until Oracle applied some heavy patches and re-released it.
    And since Oracle9i is officially deprecated (nearest thing to obsolete as to make no difference) I see no reason for Oracle to backport the patches.

  • Installing oracle 10g on windows vista business

    will i be able to install oracle 10g on Windows Vista business? Please respond me.

    Oracle 10.2.0.3 is certified on Vista
    http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10203vista.html

  • Installation of oracle 10gR2 on Windows Vista Home Premium 64 bit OS

    can we install oracle 10gR2 on Windows Vista Home Premium 64 bit OS ???
    While doing sqlplus from command prompt,
    it's giving error like
    'SP2-1503 Unable to initialise Oracle Call interface'
    'SP2-0152 Oracle may not be functioning Properly'
    How to troubleshoot the above errors,
    Has anybody tried it ???
    Plz assist.

    No Oracle product is certified against any Windows Home OS.
    As Vista was released after Oracle 10gR2, 10gR2 is not certified against any edition of Vista.
    You need to downgrade to XP, or install Linux.
    Sybrand Bakker
    Senior Oracle DBA

  • How to Install Oracle 11g on Windows Vista

    Hi Everyone, this is Abhinay here i am a Graduate Student from Electronics and i am planning to shift to CS background the main thing i want to know from you guys is " A structured procedure of Installing Oracle 10g on Windows Vista"- So can any one of you guys help me out??????????

    Hi, how are you doing ?
    Just one advice about it. If you want to work with Oracle databases, it will be better to install it on certified OS's. Doing so, you will get better experience and more realistic experience on it.
    Following the Oracle database documentation, you will get all that you need to successfully install the database in the certified OS.
    Regards,
    Shin-Iti

  • Can we install oracle 10g in windows vista

    hi all
    i am trying to install oracle 10g in windows vista ultimate ,
    but it is not getting install in windows vista
    wat is the version i have to use for windows vista ultimate ,
    thank in advance

    Hi,
    you can also check certification from http://support.oracle.com ---> certifications.
    and read below thread.
    http://forums.oracle.com/forums/thread.jspa?threadID=445907&tstart=0

  • Oracle biee for windows vista

    hi all,
    well today i installed the oracle biee on my machine(having windows vista).
    Do i need to download the seperate dump of oracle biee for windows vista or dump for windows xp will work?????

    hi All,
    Actually when i installed oracle biee on my machine (having windows vista) and replaced all corresponding files (like .rpd file & catalog and modified the nqsconfig.ini & instanceconfig.xml files) and tried to start the oracle bi presentation service, it was not starting(though i already started the oracle bi server and java host service).
    i got the following error prompt:
    "Windows could not start BI Presentation server on local computer.
    For more information,review the system event log.if this is non-microsoft service,contact the service vendor, and refer to service specific error code-1"
    Then i again replaced all the files to the default one(paint.rpd and paint catalog) and again tried to restart the service but this time i got the "error : 1053 Error 1053: The service did not respond to the start or control request in a timely fashion."
    so i just want to confirm whether we need some patch or utility to run the oracle biee on windows vista
    please help me out
    Thanks

  • Oracle compatibility with windows vista

    I require which version of oracle is compatible with windows vista
    and the links from which i can download. i tried 9i and 10g which are not compatible . do i need any patchs ....in windows ?

    Currently only Oracle 10g XE and Oracle 10gR2 client are supported.
    http://www.oracle.com/technology/tech/windows/rdbms/oraclevistasod.htm
    Werner

  • Oracle EBS with Windows vista

    I recently brought HP laptop, which came with windows vista OS. I can't go back to XP. Drivers does not support any other OS.
    Did any body try installing oracle apps version 11 down loaded from oracle site.
    Please advise me!!!

    Oracle E-Business Suite 11i/R12 is not yet certified on Microsoft Vista.
    Certify - Oracle's Certification Matrices
    http://www.oracle.com/technology/support/metalink/index.html
    If you can manage to use VMware and install some other certified OS, it would be better.

  • Not able to install Oracle 10g on Windows Vista Home Premium

    Hi All.
    I bought new Laptop preinstalled with Windows vista Home premium. I tried to install Oracle 10g , but it failed.
    Error: Oracle 10g doesn't support vista sp5. Should be less than sp5.
    Can anybody suggest me, which version of Oracle supports Windows Vista HomePremium?

    hi ,
    please follow up the below link,
    oracle 10g r1 is not supported for vista , but you can put the vista in the xp compatible mode , and then install it...
    http://www.psoug.org/reference/vista.html
    regards,
    Mohammed Mehraj Hussain

  • Oracle BPEL in Windows Vista

    Anyone knows if it is possible to install correctly Oracle BPEL Process Manager in Windows Vista. I can install the product using Windows XP compatibility mode, and the software seems to install, but some problems appear later. For example the STOP SERVER script doesnt work.
    Right now only Java SDK v 1.6 Standard Edition is certified to work in Windows Vista, but oracle BPEL is not using that version of Java.
    Any comments about it??
    Millan

    Look at the oracle certification matrix....

  • Getting jrew.exe error while installing oracle 9i in windows vista

    Hello experts
    I'm using windows vista..I installed oracle 9i in my system..While installing third CD of oracle 9i I got error like jrew.exe error and the installation was aborted.. Is any solution to solve this issue..Pls help me

    Hi Balraj,
    Check that thread:
    oracle 9i installation on windows vista beta 2
    It is mentioned:
    Not really surprising, 9i does not run on Windows Vista.HTH,
    Thierry
    Edited by: Urgent-IT on Feb 11, 2011 9:30 AM
    You should mark the thread as answered if the responses have provided you with an appropriate response.

  • Installing Oracle 10g on Windows VISTA or Windows 7

    Hey,
    I am planning to purchase a laptop and i am concerned about installing Oracle 10g .
    So which of the Following OS is compatible?
    1) Windows VISTA
    2) Windows 7
    Many Thanks!!
    Cheers
    Ramkannan.A
    Singapore

    I found this solution in http://msutic.blogspot.com/2009/08/how-to-instal-oracle-client-11g-on.html
    It work for me. I´ve installed a Oracle 10.2.0.4 (vista e w2k8 x64) in a Windows 7 64 bits.
    Thanks to Marko Sutic !
    ========================================================
    To workaround this problem I've decided to edit refhost.xml file adding entry for Windows 7.
    * in production there are 2 files refhost.xml. I´ve edited both.
    Location of this file on my system:
    .\stage\prereq\db\refhost.xml
    .\stage\prereq\db_prereqs\db\refhost.xml
    This is excerpt from newly edited refhost.xml file:
    <CERTIFIED_SYSTEMS>
    <!--Microsoft Windows 7-->
    <OPERATING_SYSTEM>
    <VERSION VALUE="6.1"/>
    </OPERATING_SYSTEM>
    </CERTIFIED_SYSTEMS>
    New lines are added at the end of this excerpt after <!--Microsoft Windows 7-->. Notice version value=6.1.
    In addiction to Marko Sutic tip, I´ve edited too the file ./install/oraparam.ini adding the new value (6.1) to the message:
    [Certified Versions]
    #You can customise error message shown for failure, provide value for CERTIFIED_VERSION_FAILURE_MESSAGE
    Windows=5.0,5.1,5.2,6.0,6.1
    I´ve finished now the installation, and all sounds good.
    good luck

Maybe you are looking for

  • How to restore files from an erased hard drive?

    hi I recently got infected with a trojan, and after updating my mac was told ive also picked up malware software. I moved everything i needed to my hard drive and wiped and reloaded my mac. i then checked my time machine backups on my hard drive and

  • Could not determine BW release of logical system 'BWPCLNT100

    after a BI systemcopy (production to development) we get the following error when we run load jobs of type "delta load". full loads work fine "Could not determine BW release of logical system 'BWPCLNT100'" even if i start the deltaload from the R/3 s

  • How can you delete part of a message not the whole  conversation?

    How do you delete part of a message from a conversation on the new upgrade? You used to be able to click on the text, ticking it and then hit trash but thats gone. Please help!!

  • Background Movie has No Sound

    Hello, I am new to Livetype and am trying to create end credits for my film. I have exported a quicktime movie from FCP of the last scene and the music to play during the end credits. When I bring this clip as a background movie into Livetype it play

  • Issue met in Capacity Leveling with tabular

    Hi, guru: I met a fascinating issue in CM22,Remain.avail.capac. fileds in the upper area is 0, so i checked the available capacity with CM01 for the correspondent day, available capacity is 14.After i creating a production order, the capacity require