Oracle 9i installation guide pls

Dear dba's
i need a detail step by step guide to install oracle 9i R2 database on linux AS4
please give me in details as i dont know how to make a group in oracle and assign them rights
please help me urgently
thanking you
Sagar

hi,
are you go through below link
http://download-uk.oracle.com/docs/html/A96167_01/toc.htm
regards
Taj

Similar Messages

SAP Oracle 10g Installation guide

Hi ,
I was trying to install SAP ECC5 -Oracle 10g on WIn03 64bit.
Can any one provide me the correct link to the installation document please.
I was not able to find the document in SAP Market place..It sounds strange..
Thanks
P

http://service.sap.com/instguides
--> SAP Business Suite Applications
--> SAP ERP
--> mySAP ERP 2004
--> SAP ECC 5.0
There is no separate installation guide for Oracle, it´s covered in the ECC installation.
Markus

Oracle 10g installation in an SPARC 64 bit Solaris 10 server

Good morning,
I'm trying to install Oracle 10g Enterprise Edition in a server with Solaris 10 as operating system. When I run the oui, the prerequisites part is passed but the installation gives me an error telling that the installer can't write in the /tmp directory. Nevertheless, I have writing grants and space enough in that directory, in fact the installer writes the installAction.log in this directory. So I don't understand which can be the problem?
Any suggestions?
Thanks in advance.
Regards,
Mabel

It could be you don't have enough free space on the tmp dir.
Check this point from the
Oracle® Database Installation Guide. 10g Release 2 (10.2) for Solaris Operating System (SPARC 64-Bit). Part Number B15690-02
If you determined that the /tmp directory has less than 400 MB of free disk space, then identify a file system with at least 400 MB of free space and set the TMP and TMPDIR environment variables to specify a temporary directory on this file system:
1. Use the df -k command to identify a suitable file system with sufficient free space.
2. If necessary, enter commands similar to the following to create a temporary directory on the file system that you identified, and set the appropriate permissions on the directory:
$ su - root
# mkdir /mount_point/tmp
# chmod a+wr /mount_point/tmp
# exit
3. Enter commands similar to the following to set the TMP and TMPDIR environment variables:
Bourne, Bash, or Korn shell:
$ TMP=/mount_point/tmp
$ TMPDIR=/mount_point/tmp
$ export TMP TMPDIR
C shell:
% setenv TMP /mount_point/tmp
% setenv TMPDIR /mount_point/tmp
~ Madrid.

Oracle 10g installation on AIX

Hi,
Could any one provide me any reference/help documents on how to install Oracle 10g software on AIX box?.
Regards,
Nagarjun.

This is the installation guide for AIX:
Oracle® Database Installation Guide
10g Release 2 (10.2) for AIX 5L Based Systems (64-Bit)
Part Number B19075-02
~ Madrid

Oracle Post Installation Semaphore Parameters

SYS INFO: Oracle 11g R2 SUSE Linux 11.
The Oracle posting installation guide requires to set the Semaphore Parameters. Here are the steps:
Calculate the minimum total semaphore requirements using the following formula:
sum (process parameters of all database instances on the system) + overhead for background processes + system and other application requirements
How can I determine (where can I find) the process parameters, overhead for background processes and system and other application requirements?
Thanks

Do you have any special requirements or needs for your database ? If not, the recommended value of 32000 (http://docs.oracle.com/cd/E11882_01/install.112/e24321/pre_install.htm#CIHEGJEH) should suffice.
HTH
Srini

Oracle 11g Installation on SOlaris 5.10

Hi ,
First i am going to install oracle 11g on solaris 5.10 . Could some one tell me what are the requirements required if not please send me the better link which i can follow for my installation ...

Follow the Oracle Installation Documentations.
"Oracle® Database Quick Installation Guide
11g Release 1 (11.1) for Solaris Operating System"
http://download.oracle.com/docs/cd/B28359_01/install.111/b32313/toc.htm
http://download.oracle.com/docs/cd/B28359_01/install.111/b32313.pdf
Oracle® Database Installation Guide
11g Release 1 (11.1) for Solaris Operating System
http://download.oracle.com/docs/cd/B28359_01/install.111/b32068/toc.htm
http://download.oracle.com/docs/cd/B28359_01/install.111/b32068.pdf
Regards,
Sabdar Syed.

Oracle Application Server 10g Installation Guide for Windows

The link to Oracle Application Server 10g Installation Guide for Windows on the OTN Web Site don't work. Using search on site does not turn up any installation document for Oracle Application Server 10g.
How can I find the Installtion Guide or the Quick Installtion Guide for Oracle Application Server 10g for Windows?

Hi,
The docs you seek are available through the OTN documentation pages at: http://otn.oracle.com/documentation/index.html.
Click on the link for "Oracle Application Server Release 10g (9.0.4)" and then on the "View Library" link for part B10468_04 - Oracle Application Server 10g Online Documentation 10g (9.0.4.0.0) for Microsoft Windows.
The Docs are located under the Documentation tab.
Alternatively, here is the direct link to the Documentation Tab interface of the Library:
http://download.oracle.com/docs/cd/B10468_04/docs.htm
Regards,
Les

Installation guide Solaris 10 / Oracle

Hi,
I have been looking for updated installation guides for Solaris 10 / Oracle 10 on service.sap.com/erp-inst and other locations, but I can only find relevant documentation from February 2005. Does any one know where I can get more updated information?
Thanks!
Regards,
Thomas Kjelsrud

Thomas,
I was able to access the same. May be you missed to scroll down the page..
No issues access the below link
<a href="https://websmp102.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002599162004E">Inst guide for All scenarios including Solaris 10/ Oracle</a>
Note that there are two parts
Part I: Planning and Preparation
Part II: Installation and Post-Installation
You must see the planning guide for your scenario Solaris /Oracle installation
Are you planning for distributed or central installation..?
Hope this helps
Good luck
Cheers
Senthil

Installation Guide from Informix 10.00.FC6 to Oracle 10.2

Hi all,
We have SAP 4.6b with Informix 10.00.FC6 on SunOS 5.10
I am loking for the installation guide from informix to Oracle 10.2. Where do we look for the installation guide in service.sap.com/instguides?
Thank You,
Salman

Hi,
Not 100% sure what you are looking for.
Are you looking for the installation guide of 4.6B in Oracle?
Or are you looking for the heteroheneus system copy guide to migrate from Informix to Oracle?
In any case you can find both on the SAP Service Marketplace under
https://service.sap.com/instguides -> Sap Components --> SAP R/3 --> Release 4.6B

Oracle 9.2 Installation Guide; User question

Hi,
i want to install Oracle 9.2 on SuSE Linux 9.3 professional. Beacuase
of that i read Ivan Kartik's Installation Guide. But i don't understand the
first step. I create an oracle user, but how can i log in as the oracle
user?
Because whenever i try to install oracle as the standard user (not the root)
i get the error that i don't have the specific permissions to install the
configuration assistant.
Can somebody help me, please??
Thank you
Daniel

Hello.
You don't need contact me because I'm checking this section every day.
Installtion of Oracle SW is performed under non privileged user (usually oracle).
Of course there are some steps which could be done with super user rights only.
As far I know there are three steps which must be done by root:
1. create oracle user (dba group)
2. execute the /tmp/OrainstRoot.sh script
3. execute $ORACLE_HOME/root.sh after installation
4. (optional) install new JRE (as desribed in my article)
If you don't have root acount there must be a person responsible for OS (System administrator - SA) with the root account. So when you need to perform som of above steps contant your SA.
I can see (from your post) that you have root account.
I create an oracle user, but how can i log in as the oracle user?Example:
Assume that you are logged as root (or other user). In this case use following command:
su - oracle
Because whenever i try to install oracle as the standard user (not the root)
i get the error that i don't have the specific permissions to install the
configuration assistant.1. You could use other shell (terminal) where you will be logged as root to perform steps under privilegged user
2. or when "su - oracle" was used then simply exit current session by "exit" command.
3. you could login as root when you execute su - command.

Oracle SOA 11g installation guide version 10.3.3 published.

I have just published the Oracle SOA 11g version 10.3.3 guide. I hope this will be helpful for the beginners and for those who wants to start working on oracle SOA suite.
here is the URL
[http://shouab.wordpress.com/oracle-soa-11g-step-by-step-installation-guide/]

Very Helpful indeed. Very comprehansive and detailed. Thanks a lot.

Installation guide of oracle AS 10g for solaris 10

Dear all,
Anyone can send me the installation guide of Oracle Application server 10g R(2) for Sun Sparc Solaris 10. Short hands-on document will be very helpful for me to install ASAP.
Thanks,
Saqib

quick install guide:
http://download-west.oracle.com/docs/cd/B14100_14/quickinstall.1012/quickinstall/toc.htm
install guide:
http://download-west.oracle.com/docs/cd/B14100_14/install.1012/install/toc.htm

Oracle solaris 11 text installation guide

Please any one can provide proper installation guide for oracle solaris OS 11 text

924250 wrote:
Please any one can provide proper installation guide for oracle solaris OS 11 textThe complete documentation set -- including installation guides -- is found at tahiti.oracle.com. The first page presents a list of products/versions. Just start drilling down from there.

Oracle SQL 11 for Windows XP 32: Installation guide (HELP!)

Hi people.
I downloaded 1.7 giga from oracle.com on my PC.
Anyone who can give me an installation guide for SQL 11?
I am not an expert at all and I really need help.
During the installation process the PC told me there was no space for Oracle Home (don't know what it is) while all the rest was correctly installed (SQL+, SQL Developer, etc). That's strange because I have 300 giga Hard drive and I only used 50 giga of it.
Anyway, I ignore that and I continued my installation process untill it said "installation complete"
As I didn't know what to do and which option to select from Start>oracle>etc, I uninstalled everything and decided to repeat the whole thing again with a guide.
In order to use SQL and simply manipulate some tables with the popular "select", "where", "from", etc functions, should I use SQL+?
As I said, it is the first time ever I use SQL, please forgive my naivety...
Thanks a lot.

I never, ever, ever, start any professional software installation without read one line of the doc.
If you found where to download the software, you could find easily how to find the installation documentation, hardware/software requirements, installable components...
Take a look of the links given earlier.
Nicolas.

Oracle 10.2.0.2 g Installation Guide

Could you please get me a Oracle 10.2.0.2 g Installation Guide
Best Regards

If you want to install "just Oracle" then go for http://technet.oracle.com
If you want to install a SAP system use the installation guides at http://service.sap.com/instguides.
Markus

Oracle 9i installation guide pls

Similar Messages

Maybe you are looking for