Oracle 9i installation on Windows 2003 Cluster

Hi
I Need any good documentation for Oracle 9i installation on Windows 2003 Cluster.

Complete Guide is here
http://download-uk.oracle.com/docs/cd/B19306_01/install.102/b14207/toc.htm

Similar Messages

  • Oracle 9i Installation on Windows 2003 Server 64bit - URGENT

    Hi ,
    I am installing oracle 9i on win 2003 server (64 bit) enterprise edition. After the installation whenever I try to run Database Configuration Assistant or Net configuration assistant nothing happens.
    If i run DBCA on command line then it runs but not from the Start menu. Can anyone suggest the solution ? I tested it with oracle 9i (32 bit) and (64bit) versoins for win2003 server platform. But same results. Also tried the oracle 32 bit for XP on windows 2003 server but in vain.
    It seems like there is PATH problem but i checked all the paths and they seem preety okay. I wonder why it runs from the command line when I recall dbca.bat file and not from the Oracle menu.
    I would appreciate any remedy to this problem

    I hate to be a wet blanket, but this forum is for feedback about the OTN site. The best place for your current thread is in the Database Installation:
    Database Installation
    Thanks!

  • Oracle Software Installation in Windows 2003

    I need install oracle9i on windows 2003.
    Can i use same windows 2000 cd for windows 2003

    This question cannot be answered , since there isn't only one version of Windows 2003. Check the certification matrix for your planned version:
    http://www.oracle.com/technology/support/metalink/index.html
    Werner

  • Installing Oracle9i Database on Windows 2003 Cluster

    Can anyone tell me if there are any additional steps needed to install an Oracle DB on a Windows 2003 cluster besides just running the installation and taking the defaults? I was hoping that the software would be cluster aware but it doesn't appear that it is.

    Okay,
    I have gotten a little further with this. I have my 2 node active/passive windows cluster installed and working. I also install Oracle Fail Safe and have it setup and working. I then install my Oracle9i database on node 1 using a local disk for the home directory and the DB/logs files etc on shared disk (SAN back end). I then mirrored the install on my 2nd node using the same home name and location on a local disk. What other steps do I need to take to verify that my new Oracle database will function correctly should a node fail and fail over occur. I am not familiar with any of this at all and am just trying to get to a point where I have my DB installed and working correctly within the cluster before I hand this of to another person. I guess what I am saying is I need to make sure my new DB is cluster aware and will fail over correctly. Any help would be greatly appreciated! Thank you.

  • Steps For Oracle10gR2  RAC installation on  windows 2003 enteprise edition

    can any one tell me what are the steps for oracle 10gR2 installation on windows 2003 enterprise edition. i would like to know two-node RAC setup with SAN

    Hi,
    Were you able you do the 11gr1 RAC installation on Windows 2008? I am struck with configuring Storage as onfigure Shared Storage windows does not show any disks. Also runcluvfy fails with below error.
    Check: System architecture
    Node Name Available Required Comment
    rac11 unknown 32-bit failed
    rac22 unknown 32-bit failed
    Result: System architecture check failed.
    Can anyone throw more light to resolve this issue.
    Note that i have successfully does this on Windows 2003.
    Any help will be highly appreciable.
    Thanks
    Nilanjan

  • Problem Oracle 10g database Installation on Windows 2003 Server

    Hi All,
    I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
    I double-insured that there is enough disk-space and I am also in the Administrators-Group.
    Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
    Regards
    Muhammad Shoaib

    898118 wrote:
    Hi All,
    I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
    I double-insured that there is enough disk-space and I am also in the Administrators-Group.
    Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
    Regards
    Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names.

  • Does Oracle 10G R2 support installation on Windows 2003 Domain Controller?

    Does Oracle 10g R2 support installation on Windows 2003 Domain Controller? I remember that 10g R1 had issues with the DC? Is it still the case. Does it work now?
    Any help is appreciated.
    Regards,
    Raghav

    We have Oracle 10g R2 running on a Windows 2003 domain controller. It was not a domain controller when Oracle was installed. The domain was created after installation. (I don't recommend that procedure. I spent a long day fixing the installation after they configured the domain.) If Oracle is unhappy with being on a domain controller, it has not shown it yet.

  • Space Problem in G: - after NW2004s SR1 installation on Windows 2003 server

    HI Friends,
    I have installed NW2004s SR1 on Windows 2003 server with Oracle 10g database successfully. My server has sufficient harddisk space as follows.
    C: 9.6GB
    G: 24GB
    H:64GB & I: 73GB.
    RAM is 6GB
    While installing NW2004s i have defined a paging size on C: 400MB-1600MB and
    i have set the option as System Manageble on other drives G, H& I drives. I did not get any Swap space problem while installing.
    During installation I have chosen G: drive to store MirrorlogA, MirrorlogB, Oraarch, OriglogA, OriglogB folders of Oracle for redolog archives,.Total size of all these folders is 17.4 GB
    G: drive has one more folder Program files which is of 155KB  and no other files exist in it.
    But My system says that I am running out of Space on G: drive and free space available now is only 44MB.
    My question is where has the rest 5GB of space gone? Is it consumed as a part of Paging file which i have set on this drive as System manageble??
    I have set the same option on other drives too i..e H & I. But i am not facing any space issues for these drives.
    What could be going wrong?? Please suggest me how to correct this
    Thanks
    mv_d

    898118 wrote:
    Hi All,
    I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
    I double-insured that there is enough disk-space and I am also in the Administrators-Group.
    Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
    Regards
    Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names.

  • SAP R/3 4.6C with Oracle 9.2 on Windows 2003-Server

    Hi,
    I need to find out whether it's possible to install SAP R/3 4.6C
    with Oracle 9.2 on a Windows 2003 - Server.
    Is is only possible to install this sap-system with Oracle 8.1.7 on a Windows 2000-Server? Or are there some other ways?
    If no, please tell me the possibilities for the correct installation of the desired sap-system.
    Awaiting for your feedback.
    Kind Regards

    ->SAP R/3 4.6C with Oracle 9.2 on Windows 2003-Server
    GreetZ, AH

  • OS Migration from Windows 2003 cluster  to Windows 2008 R2 MSCS

    We want to go for windows 2008 R2 server ( 64-Bit)  MSCS by migrating from windows 2003 Cluster ( 32- Bit) . We are running on ECC 6.0 and oracle 10.2.0.2 DB.
    Is it possible ?
    Is it traditional System copy if so how to migrate the cluster ?
    Regards

    > 2. If the oracle version is 10.2.0.2 then does it will support Windows 2008 R2.
    You need at least 10.2.0.4 (you need to install that version with a separate DVD, you can't install with the normal Oracle DVD (10.2.0.1). See
    Note 1303262 - Oracle on Windows Server 2008
    Be aware of the fact that the normal standard support for 10.2.x is ending at end of july (you'll have to pay an extra maintenance fee if you continue to run that version) - see
    Note 1110995 - Extended maintenance for Oracle Version 10.2
    So if you now do a system copy to new hardware with a new os anyway, I would upgrade to 11.2.
    Markus

  • IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit

    Dear all,
    we are just trying to install IDES 4.7:
    IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit
    But the installation break with error Message:
    Error 5 (Access is denied.) in excution of a "NetServerGetInfo" function, line (233), with parameter (saptranshost, 101).
    MOS-01224 Failed to add privileges "NetcbPrivilege SeAssignPrimaryTokenPrivile SeIncreaseQuotaPrivilege to account ....." ....
    FJs-00012 Error when excuting script....
    Any experience or help from your side?
    Thanks in advance
    HanseAtik

    Hi. First login in your server with user "sid"adm after go to START --> RUN --> CMD
    adn execute "R3trans -d"  Tell what result .
    About documentation read -->
    service.sap.com/~form/sapnet?_SHORTKEY=00200797470000065912&
    in left corner chek your release like :
    "SAP R/3 Enterprise Core 4.70 / Ext. Set 2.00 (SR1)"
    After read the document for your release, for example if you use the Oracle on WIn and R/3 Enterprise 4.7 x 2.00 SR1 -->
    Inst. Guide - R/3 Enterprise 4.7 x 2.00 SR1 on Win: Oracle 
    Regards.
    Edited by: Sergo Beradze on Mar 21, 2008 10:55 AM

  • Problem on installation of windows 2003 Standard Ed. 64 bit with 10 GB RAM

    Hi,
    I'm trying to install the Oracle 10G R2 on Windows 2003 Server Standard Edition 64 bit on HP machine 64 bit.
    My problem is that the Oracle is seeing just 4GB of RAM.
    I found some Oracle notes that explain this problem for machine and OS with 32 bit.
    Any idea?
    Thanks,
    Sergio

    Are you installing Oracle 32-bit?
    (In that case, the process virtual memory addressing is limited to 2^32 = 4GB. Note also it is virtual, not physical memory)
    64-bit editions (e.g. for X64) are available from:
    http://www.oracle.com/technology/software/products/database/oracle10g/index.html
    Message was edited by:
    orafad

  • Oracle ebs installation on windows 2008 R2

    Hi Hussein,
    I am doing oracle EBS installation on windows 2008. As per installation doc below are the pre-requisite
    The Prerequisites Software are:
    1.Chose and Operating System windows 2008 (32 bit):
    Select the Windows Operating system and install it. After installed OS successfully need to change DNS entries or Active Directories as per your environment.
    2.Install the Microsoft Visual C++ 2008 software.
    See the post for installation of – Microsoft Visual C++ 2008
    3.Install the MKS Toolkit – Versions 9.0 (Patch 3 or higher):
    See the post for installation of – MKS Toolkit.
    I wanted to know that is there any alternate of MKS tool kit as I am unable to get it .
    Regards,
    Raj

    hi Raj
    3.Install the MKS Toolkit – Versions 9.0 (Patch 3 or higher):
    See the post for installation of – MKS Toolkit.
    I wanted to know that is there any alternate of MKS tool kit as I am unable to get it .
    Yes go for cygwin
    please see
    Using Cygwin to Maintain Oracle E-Business Suite Release 12 on Windows[Article ID 414992.1]
    Oracle E-Business Suite R12 Installation Steps on Windows XP
    ;) AppsMAstI :)
    Sharing is Caring

  • Oracle 9i Enterprise for Windows 2003 server 32bit

    Hello,
    tried to download an Oracle 9i Enterprise for
    Windows 2003 server, 32 bit. But all I've got
    is a patch... Perhaps the wrong file in the
    download area?
    Hans-Juergen Thiess, Berlin / Germany

    Hello.
    I dont Know, from where download Oracle 9i Database.
    In http://www.oracle.com/technology/software/products/oracle9i/index.html, only can download Release, but not the full version.
    Can you help me?
    Thanks

  • Error while running setup.exe for oracle installation on windows 2003

    Hi,
    I am trying to install oracle 9.2.0.1 on my windows 2003 machine and when i click on setup.exe nothing happens. when i tried to run it thru command prompt again nothing happens when i check in computer management => event views it throws following error.
    The application, C:\DOCUME~1\barb\Local Settings\Temp\1\OraInstall2006-08-11_05-19-46AM\jre\bin\javaw.exe, generated an application error The error occurred on 08/11/2006 @ 05:19:56.356 The exception generated was c0000005 at address 6D4CF9A0 (jvm!JVM_TraceMethodCalls)
    can anybody suggest me what could be the problem or i will have to install jvm first and then try installing oracle?
    thanks
    Chandan

    did you check the installation guide and Preinstallation Requirements?
    http://download-west.oracle.com/docs/cd/B19306_01/install.102/b14316/reqs.htm#i1011417

Maybe you are looking for

  • I've lost the finder and desktop icons

    Purchased new iMac 10 days ago but did not immediately transfer data from old computer.  When I did, I transferred from a Backup on Time Machine using Migration Assistant .  I did not merge the two users I had the New Jon (new computer)  and the Old

  • Can not print pdf docs

    Can not print pdf docs after intalling Lion. Any solutions?

  • Drives Going to Sleep

    I've been to the Energy Saver. I have turned off "Put the hard disk (s) to sleep when possible." I have it set to sleep in 3 hours. Yet continuously, the external Firewire drives go to sleep--sometimes even during the long Auto Save (rant previously

  • Custom grid spread in Hyperion Planning v 11.1.2.3

    Hello In Hyperion Planning version 11.1.2.0 one could add custom grid spread methods to be used in planning forms. To add methods one had to add entries to the HSP_SPREAD_PATTERN table On migrating to version 11.1.2.3 the values still exist in the ab

  • Custom sort problem

    Hi, I have a merged dimension created by two queries and a variable which is again created with the measures of these two queries. They all work fine. However when I apply a custom sort to the merged dimension, the value of the variable disappears in