Oracle 9i instlllation probs on 2000 advance Server
Sir,
i used fresh system with 2000 advance server. when cd ran it required jre i provided i used General Purpose. But after finishing upto 100% database configuration assistant was not configuured. no pre configured datbase was visible as it gave Oracle not available. Please solve it it's urgent..any particular method to install.
i am trying it for past 3 weeks no succes.. I hope u will guide me if u have got the solution by now.
akash
[email protected]
The problem is that 9.2.0.1 is not even certified for Windows 2008, and has been de-supported a long time ago.
This means with respect to this release you are on your own.
Oracle 10.2.0.4 is also not anymore in premier support, so Oracle won't address any new problems.
You may want to switch to 11gR2 or to downgrade the server to Windows XP. Windows XP however is out of support too.
Sybrand Bakker
Senior Oracle DBA
Similar Messages
-
Windows 2000 Advanced Server Service Pack 2 and Oracle 8.1
Hy,
I've got Oracle 8.1.6 instaled over an Windows 2000 Advanced Server user as a web server. Yesterday I updated it with the service pack 2 for windows 2000.
When I restarted the server after the install, the Oracle database services didn't start. They stay "Starting" but didn't finish to start. I tried to start them again but they were locked. I couldn't stop/restart them.
I had to uninstall the SP2. Then it works OK.
Is there any known problem with Oracle 8.1.6 and the SP2?
ThanksWhen Oracle installs itself, it usually replaces one or more Windows system files with its own versions. Your SP2 installation probably replaced those files with originals and Oracle got confused.
The only solution I can think of is to install all the necessary SPs first and then Oracle (when possible). -
Oracle 8.1.7 on Windows 2000 Advanced Server
We have a client that is running the 8.1.7 server on a Windows 2000 Advanced Server. The database service is set to start automatically, but every time the server reboots the database service says that it is started, but when we try to access the database we get a message that says "Oracle not available". After we go into the DBA Studio and manually open the database everything works fine (until we have to reboot again). Are there any known issues with 8.1.7 and 2000 Advanced Server? Is there some configuration setting that we could be missing that will get the database to automatically start like it is supposed to?
Thanks in advance for any help,
David L. England,
Software Engineer, AlphaCorpThey are using a static IP and the network was all setup before we installed Oracle. I think we have the local System account starting the service. Is the right to start the database something we need to assign to the local System account or should we be using a different account?
I don't remember ever having to go into the service and change anything on any system we have setup before, but this is the first 2000 Advanced Server we have done.
Thanks,
David -
Is Oracle 10g Express Edition compatible with Windows 2000 advanced Server
I have installed Oracel 10g Express Edition on windows 2000 advanced Server, but it is not working properly, but when i installed it on Windows 2000 Professional, then it is working properly, Does anybody know why this is happening. If anybody know why this is happening, please tell me and also tell me how can i install Oracle10g xe in Windows 2000 advanced server.
There should be no issues. A few possible reasons you are running into problems:
- installation using a domain administrator (it works best using a local admin);
- firewalls or anti-virus software or other port blocking mechanisms;
- DHCP resets;
However, unless you tell us exactly the symptoms we are only guessing.
My car didn't start this morning, but my wife's car did. Can you call me why based on this information? -
NtfsServer problem on Windows 2000 Advanced Server
I've installed Oracle 8.1.6 and iFS 1.0 on Windows 2000 Advanced Server. Everything else seems to work fine with iFS, but the NtfsServer always fails to start up.
Is this a compatibility problem between Oracle and Windows 2000? I have no drive letter O: so it should be free for iFS to use.
Here is the last entry from NtfsServer.log:
Sun May 28 19:47:07 GMT+03:00 2000
iFS NT File Server Version 1.0.8.1.0 Production
Sun May 28 19:47:07 GMT+03:00 2000
ServerName(id): NtfsServer(6508)
server: NtfsServer
username: system
AnonymousUsername: guest
DriveLetter: o
NtfsSessionCache: 40
OptimizeStartup: true
LogLevel: 1
LogStackTrace: true
net start OracleIfsd
Return code = 0
ifsmount o
Return code = 1
SR Event: ID:6757 PENDING SPECIAL SUBTYPE:13 6766L
SR Event: ID:6757 COMMIT SPECIAL SUBTYPE:13 6766L
(0) Unable to open IFS device
ifsdismount o
Return code = 2
Cache performance for session cache
CurrentSessionCount=0
HighestSessionCount=0
CurrentSessionCache=0
Performance of readonly connection pool:
MinimumSize=5
TargetSize=20
MaximumSize=100
TargetSizeTimeout=1000 ms
MaximumSizeTimeout=10000 ms
CurrentSize=5
AllocatedSize=0
ImmediateAllocationCount=4
DeferredAllocationCount=0
FailedAllocationCount=0
AverageAllocationTime=0 ms
Performance of writeable connection pool:
MinimumSize=5
TargetSize=20
MaximumSize=100
TargetSizeTimeout=1000 ms
MaximumSizeTimeout=10000 ms
CurrentSize=5
AllocatedSize=0
ImmediateAllocationCount=2
DeferredAllocationCount=0
FailedAllocationCount=0
AverageAllocationTime=0 ms
Cache performance for S_LibraryObject cache
CACHESIZE=65
OBJECTCOUNT=65
PUTCOUNT=130
REMOVECOUNT=0
FINDCOUNT=370
HITCOUNT=237
MISSCOUNT=133
HITRATIO=0.6405405405405405
MISSRATIO=0.35945945945945945
Cache performance for FolderPath cache
CACHESIZE=0
CacheSizeEstimate=0
ACCESSSEQUENCE=1
SequenceAtLastPurge=0
PUTCOUNT=0
REMOVECOUNT=0
PURGECOUNT=0
FINDCOUNT=0
HITCOUNT=0
MISSCOUNT=0
HITRATIO=1.0
MISSRATIO=0.0
Cache performance for committed S_LibraryObjectData cache
CACHESIZE=329
CacheSizeEstimate=329
ACCESSSEQUENCE=3
SequenceAtLastPurge=0
PUTCOUNT=329
REMOVECOUNT=0
PURGECOUNT=0
FINDCOUNT=685
HITCOUNT=356
MISSCOUNT=329
HITRATIO=0.5197080291970803
MISSRATIO=0.4802919708029197
Cache performance for LibraryObject cache
CACHESIZE=65
OBJECTCOUNT=65
PUTCOUNT=65
REMOVECOUNT=0
FINDCOUNT=73
HITCOUNT=8
MISSCOUNT=65
HITRATIO=0.1095890410958904
MISSRATIO=0.8904109589041096
iFS NT File Server terminating
nullI have the exact same symptoms on a Win2000 Pro development machine. fails at ifsmount,same as you...
-
How to Install OPS on Windows 2000 Advance Server??
I just try to install Oracle Parallel Server on Win 2000 Advance
server, but it seems that the installation is not success.
I am using 2 Compaq Proliant ML530 PIII/Xeon as a hardware and
Windows 2000 Advance Server for Operating System.From the
vendor's tools checking, it stated thad clustering service is
already installed (ok!)
When I install Oracle Parallel Server, the default drive for
installation is already drive V (share disk), and Oracle
Parallel Server has been selected on the available product
components page, but I don't see node selection for install.
(According to Installing and Creating an Oracle Parallel Server
Database manual, I must select the nodes to which I want to
install the software from cluster node selection screen page)
Also when creating database (using Oracle database configuration
assistant), it does not displays database creation selection
(OPS or single instance configuration)as the first page, but
directly go to the second page (create/delete database).
Is the problem caused by wrong step of oracle Installation or OS
itself (ie: Cluster Manager)??
Anybody have experience on it can help me?
ps:I am using Oracle 8.1.7
Regards,
SuryantoPlease check whether you have installed the OSD layer (
Operating system dependent layer). Such layer can be obtained
from your hardware vendor ( eg compaq). You should have such
layer in your system before installing the OPS.
If you have such layer installed, you can see other nodes during
installation of Oracle and OPS.
Hope this help! -
SAP R/3 4.7 INSTALLATION ON WIN-2000 ADVANCED SERVER.
Hello!
IS THERE ANYONE WHO CAN HELP ME?????????
Dear, plz. Give me the steps for sap r/3 installation on win 2000 advanced server.
I am not having password for sap community market place.
So, iam not able to get the steps for installation I AM HAVING THE FOLLOWING CD'S
1) SAP 4.7 GUI
2) JAVA
3) SAP KERNEL
4) ORACLE 9.2.1- 3 CD'S
5) SAP EXPORT- 7 CD'S
Plz. Help me in this.plz.mail me on my ID- [email protected]
Thanks & regards,
Sandeep Chaudhary
m-09312406060
0129-3260483,4120483how come you have the cds and no access to sapnet? strange....
basically these are the steps:
-> install win 2k server
-> check for all hardware and software requirements (needed for sap installation)
-> install oracle server 9.2 and the appropriate patchset (being 9.2.0.8 at the time) and the interim patches (opatch)
-> install sap central instance using sapinst (you will be asked for the different cds such as java, kernel etc.)
-> install sap database instnace using sapinst (you will be asked for the different cds such as java, kernel etc.)
-> apply post-installation steps
but: without the installation guide and the relevant sapnotes it will be difficult to succeed....get access to sapnet asap!
GreetZ, AH -
Memory Dump Error on Widnows 2000 Advanced Server.
Hi,
I have a serious problem with my Oracle Database Server ( Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production ) . It is running on Windows 2000 advanced server. After every 2 or 3 days I am getting a memory dump error on my server and I have to restart my server.
Twice my database got corrupted due to improper shutdown and one of the data blocks got corrupted in one of the oracle data file.
The Data server has 1572144 KB of RAM. and 2302 MB of Virtual Memory.
Can anyone give me any suggestions why this is happening and how to solve this?
Thank You,
Suman KumarDonald,
Thank You for your reply.
By Oracle Memory footprint do you mean Oracle SGA size?
I checked my SGA size:
SQL> select * from v$sga;
NAME VALUE
Fixed Size 75804
Variable Size 80416768
Database Buffers 157286400
Redo Buffers 77824
I have 2302 MB of Virtual Memory
I have 1,572,144 KB of RAM in my server.
I am using the default configuration of the Oracle Database created by Oracle Universal Installer.
I downloaded it from OTN. I have not applied any patches to my database. Should I go ahead and apply all the available pathces for Oracle 8.1.7.0.0?
I checked on Metalink for any pathes related to memory dump on windows 2000 advaned server, couldn't find any. The database version that I am using is Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production.
There is no screen saver on my server.
Please advice.
Thank You,
Suman -
When I install the LabVIEW Internet Developers Toolkit 5.0 in Windows 2000 Advanced Server, the installer displays a Wrong OS error. I HAve ignored the error and contiued the installion still the Internet connectively pallete does not apper in my function Pallete .How do I resolve this error?
You might try reinstalling the toolkit but the installer should have created the following directory:
C:\Program Files\National Instruments\LabVIEW 6.1\vi.lib\addons\internet
Within this folder, there should be a folder for:
ftp
http
image
smtp
telnet
url
utils
and a file dir.mnu
It could be that the toolkit was intalled to the wrong folder. In which case you can move the folders and reboot LabVIEW. -
Mac G5 10.3.9 Samba Issue with Windows 2000 Advanced Server??
I have just installed a new Windows 2000 Advanced Server network but the Mac G5s running OS X 10.3.9 Panther cannot navigate the server - the finder just hangs with a beachball. The PCs can navigate without any problems.
Navigation is fine on the G4 running OS X 10.2.8 Jaguar on the same network.
On the G5 I have tried creating a new user and put the Mac using DHCP but this doesn't solve the problem.
I think I have tracked down the problem to Samba but am not sure - When I type in the direct samba link to the server:-
smb://10.10.0.5
The "SMB Mount" screen asks me which share I would like to mount. This works without a problem. I create a shortcut to the share. This also works until I reboot, then the problem reoccurs!
I think I need to reinstall Samba, or update the Samba software?
Does anyone have any thoughts,
John
G5 Mac OS X (10.3.9)HELP FROM A GUY WHO IS NOT A SYS ADMIN OR ON AN I.T. STAFF!
And with that dislcaimer...
What sort of settings do you have checked in your Directory Access > Services panel? That is, do you have SMB turned on?
Also, I would make sure that your server and computer's clocks are showing the exact same times-- just in case there is a synchronization issue.
Our Macs have had similar, but not identical, problems in the past. -
Problems with RAC installation with Windows 2000 Advanced Server
Hello,
I've two servers in cluster mode with W2K Advanced Server, and a RAID-5 array of 4 disks shared by both of them. My problem is that I've installed The Cluster Service of Windows in order to have an active/passive configuration of my servers, because I have a common directory structure that is accessed by the PC's of the LAN.
By another hand, I want to install Oracle Real Application Cluster to manage my Oracle database but after create the extended partition and the logical drives when I execute the file \preinstallation_rac\clustersetup\clustersetup.exe to create the cluster, when I select the option Create a cluster the following error message appears me:
"Any disk Oracle partition has been found. Stop this wizard, create an Oracle partition and try it
again."
I'd like to know if it's possible to have the Service Cluster of Windows 2k and the Oracle clusterware?¿ Altough before begining the installation I've stopped my Cluster Service as documentation suggests. If somebody knows what it's happening to me I'd be really very grateful.
Thanks in advance,
IsabelHello Joel,
I've already read all documentation provided by Oracle about Real Application Clusters
and I've not found anything to solve my problem. Certainly I want to use OCFS but when I
try to execute preinstall_rac\clustersetup.exe to install CFS the error appear and I can't
continue with RAC installation.
Besides I've tried command "lsnodes -v" and got :
Could not load CM.dll
Could not initialize cluster
And when I've tried to run "clustercheck" I've got :
** Copy File: Create Directory failed - Error 183
** Directory = \\192.168.1.111\Cy$\Temp\opsm
Created directory \\192.168.1.112\Cy$\Temp\opsm
Could not copy file to other nodes [error = 183]
I've read metalink Note 186130.1 Clustercheck Fails with Windows Error 183 and the only
proof I haven't done is get the clustercheck.exe release1(9.0.1).
Any suggestion will be very appreciated.Thanks,
Isabel -
Clustering Weblogic 5.1 using Windows 2000 Advanced Server
Is there any documentation available on using Microsoft's clustering technology in win2000 Advanced Server for weblogic 5.1?
Does weblogic support Microsoft's Clustering technology as a "cluster-aware application?"
If Weblogic is NOT cluster-aware, WE would like to set it up as "non-clustering aware application" or Generic application! Is there any part of the registry that is used while WL is running that should be replicated from server to server in a failover situation?
Any Additional Info would be helpful!
Thanks.
Kevin Waropay
[email protected]
I recall hearing about some bugs on terminal server. Did you use the
version with the latest service pack?
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
"Dave" <d_dt_ @hotmail.com> wrote in message
news:3b4956d1$[email protected]..
Whilst installing Weblogic 5.1, at around 100% the install program bombedout, and did not complete properly. Any ideas. This was on Windows NT4
terminal server, -
Error in Oracle 10g Installation windows 2000 advance server
Hi,
I am facing error message below when try 2 install oracle 10 in my work station . Already 8i and 9i with forms and reports was there in my machine. The follwing error display in log file.
Actual Result: 4
Check complete. The overall result of this check is: Passed
=======================================================================
Checking physical memory requirements ...
Expected result: 256MB
Actual Result: 503MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Failed <<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
After given an ip address and proceeded. This error message is displayed in trace file:
Shutting down instance: further logons disabled
Mon May 07 11:32:09 2007
Stopping background process CJQ0
Mon May 07 11:32:09 2007
Stopping background process MMNL
Mon May 07 11:32:10 2007
Stopping background process MMON
Mon May 07 11:32:11 2007
Shutting down instance (immediate)
License high water mark = 1
Mon May 07 11:32:11 2007
Stopping Job queue slave processes
Mon May 07 11:32:11 2007
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Mon May 07 11:32:16 2007
alter database close normal
ORA-1507 signalled during: alter database close normal...
The error message in udump trace file is as follows:
Dump file e:\or10g\product\10.2.0\admin\or10g\udump\or10g_ora_2340.trc
Mon May 07 11:26:03 2007
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Windows 2000 Version V5.0 Service Pack 4
CPU : 2 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:4M/503M, Ph+PgF:9M/1327M, VA:1740M/2047M
Instance name: or10g
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Windows thread id: 2340, image: ORACLE.EXE (SHAD)
opiino: Attach failed! error=-1 ifvp=00000000
There is no pfile or anything in admin directory. Kindly help me in installing 10G for testing please
efshafiSolution : Install and Configure Microsoft LoopBack Adapter:
Installation of Microsoft LoopBack Adapter:
1. Click Start, and then click Control Panel.
2. Click on Add Hardware and then Click Next.
3. Click Install the hardware that I manually select from a list, and then click Next.
4. Click Network adapters, and then click Next.
5. In the Manufacturer box, click Microsoft.
6. In the Network Adapter box, click Microsoft Loopback Adapter, and then click Next.
7. Click Finish.
Configuration of Microsoft LoopBack Adapter:
1. Click Start, and then click Control Panel.
2. Click on Network and Sharing Center.
3. On the left side of the Window, Cick Manage Network Connections.
4. You will find a name like "Local Area Connection 4 Unidentified Network Microsoft Loopback Adapter".
5. Right Click on it and select Properties.
6. Then Click on Internet Protocol Version 4 (TCP/IPv4) and then again click Properties.
7. Click on Use the following IP address and enter 192.168.1.10 for the IP Address and 255.255.255.0 for the subnet mask.
8. Click OK.
After this you can continue with the installation of the Oracle 10g again. -
Oracle 8.1.7 on Redhat Advanced Server 2.1
According to this link http://www.redhat.com/oracle_cert/ RH AS 2.1 is certified for Oracle 8.1.7.
But I couldn't find any information about installing oracle 8.1.7 on RH AS 2.1 on the internet.
Could some one help me?
I need step by step installation procedure, because I want to use this configuration in my production environment.Agi,
I need to do the same thing as you, and have the same question as you. What is your current situation? What you got from Oracle support?
I have experienced installing Oracle 8.1.7 on SuSE 7.3 and 8.0 with quite a few patches. Among others, one ought to install orarun.rpm by SuSE and Oracle patch for glibc as seen elsewhere on Web. I wonder if I have to do the same for RH AS 2.1, because it's released after 8.1.7.
Here is my e-mail addr.
[email protected]
let me know your luck.
thanks
Johnny -
Whether Oracle 8.1.6 Supports Windows 2003 Server/Windows 2000 Adv. Server
Dear All,
Whether Oracle 8.1.6 Supports Windows 2003 Server/Windows 2000 Adv. Server.
I tried it in windows 2003 server but i couldn't. Atlease tell me wheather it support windows 2000 adv. server. This is my first dba job.
Under Doc ID: 66397.1 saying Oracle 8.1.6 Not Support Windows NT Server 4.0 Terminal Server Edition.
Under Doc ID: 77627.1 saying Oracle 8.1.6 Supports Windows 2000 Support.
Please help me out urgently.Since you have access to Metalink, you could be looking at the Certify tab to find this information. But, the answer is that 8.1.6 is no longer supported by Oracle. However, you should be able to install it on Win 2000 advanced server. You just can't get any support for it.
The earliest version of db supported on Win 2003 was either 9.0 or 9.2, but 9.0 is desupported now as well.
Maybe you are looking for
-
Jvc camcoder working on iMovie
I'm going to purchase a video camera and have done some research. I thought I would get a JVC MG255 and before I buy it was checking the discussion group to see if there were any problems. I've read some columns about no audio / max number of clip tr
-
Hi, Query regarding Analysis Authorisation..... I had a 3 Queries based on a Multiprovider which is a combination of 10 Info Cubes.... Where do i need to implement my authorisation on Multiprovider level or at the cube level..as data is avaliable in
-
Problem Lab color mode in Illustrator CC 2014
What is the best way to choose a CMYK color mode in Illustrator? When I want to import a file from Illustrator to InDesign it will automatically be converted to a Lab color mode and I can not change the CMYK values. All colors from Illustrator are th
-
I am using a Xerox Phaser 7760 with Freehand MX on OSX 10.3. When I go to the printers web interface and print out the test Pantone library on this printer, it prints very good, not perfect, but very good. When I then go into freehand and draw some s
-
Why does Verizon not support Windows 8 for wi fi?
Why does Verizon not support Windows 8 for wi fi? Are they planning on supporting Windows 8? Solved! Go to Solution.