Oracle 9i Linux amd64 download fails

I have tried to download the 3 files on this page
http://otn.oracle.com/software/products/oracle9i/htdocs/linuxx8664soft.html
several times. The result is always the same. Following the instructions for ungzip'ing and cpio'ing the files are found to be corrupted. The cksum of the download files are exactly the same as posted on the webpage. Any explanation or suggestions?

i did check for the OS and version compatibilty before downloading... also i have enough disk space.... i got an Unexpected End of File error.
Sangram

Similar Messages

Oracle on linux - not downloading

Hi,
I am trying to download oracle on linux and am following
instructions as given in the site. But the download aborts
halfway. What cud be wrong? Any thoughts?
Thanks.
null

Bhola De (guest) wrote:
: rbw (guest) wrote:
: : Shanthi (guest) wrote:
: : : Hi,
: : : I am trying to download oracle on linux and am following
: : : instructions as given in the site. But the download aborts
: : : halfway. What cud be wrong? Any thoughts?
: : : Thanks.
: : I get the same thing over and over myself. I suspect
: : that Oracle has their ftp servers set to timeout a
: : download session quicker than mere 56K modem mortals
: : can download. It is a sneaky way on Oracle's part to
: : limit the downloads to "corporate" users with fast links
: : rather than individuals who are trying to learn Oracle
: : tools on their own.
: I started using ncftp 3.0 beta that came with RedHat 6.0.
After
: modem connection, I issue the command:
: ncftpget ftp://ftp.oracle.com/pub/www/oracle8/linux/805ship.tgz
: If it gets disconnected in the process, I issue this command
: again, and it RESUMES from where it left off instead of
starting
: from this beginning.
I have tried on several occations, (early on a week-end and late
at night). It will download a portion, then terminate. I can
re-start it once with no problem. The second time I try to
re-start, it starts from the begining. I even downloaded a copy
of EzFtp. However it the server will not allow me to connect
using the ftp software.
null

11g on Oracle Ent Linux ./runInstaller fails: Error: can't open display:...

X-server stuff is killing me...
As root:
[root@blackbox ~]# xclock
the xclock starts right up.
[root@blackbox ~]# su - oracle
[oracle@blackbox ~]$ /usr/bin/xclock
xclock DOES NOT start. Permissions are fine and command just sits there until Ctl-C to abort.
[oracle@blackbox ~]$ hostname
blackbox
[oracle@blackbox ~]$ echo $DISPLAY
blackbox:0.0
[oracle@blackbox ~]$./runInstaller
...some checks are done and passed
...>>>Could not execute auto check for display colors using command /usr/bin/xdpinfo. Check id the DISPLAY variable is set...
Continue? yes
Can't connect to the X11 window server using blackbox:0.0...
...OUI-10027: To enable clent users to access the X server, ...# xhost +
etc., etc.
I tried all the checks suggested in the message including setting the DISPLAY to:
DISPLAY=192.168.1.110:0.0; export DISPLAY (shell is bash)
I seems that as the oracle user I cannont connect to the Xserver? Not sure how to check other than testing w/ something like xclock.
Any assistance much appreciated.

...ok...I still don't understand what the difference is from before. But, as you suggest...
(btw, the error message ">>> Could not execute auto check..." seems erroneous to me in that I'm running the KDE desktop just fine???)
[root@blackbox ~]#
[oracle@blackbox database]$ echo $SHELL
/bin/bash
[oracle@blackbox database]$
[root@blackbox ~]# DISPLAY=:0.0
[root@blackbox ~]# export DISPLAY
[root@blackbox ~]# echo $DISPLAY
:0.0
[root@blackbox ~]# su - oracle
[oracle@blackbox ~]$ cd /tmp/database/
[oracle@blackbox database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 13706 MB Passed
Checking swap space: must be greater than 150 MB. Actual 1791 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n] y
Rechecking installer requirements....
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2007-10-07_04-14-47PM. Please wait ...[oracle@blackbox database]$ Oracle Universal Installer, Version 11.1.0.6.0 Production
Copyright (C) 1999, 2007, Oracle. All rights reserved.
Can't connect to X11 window server using '192.168.1.110:0.0' as the value of the DISPLAY variable.
192.168.1.110:0.0
192.168.1.110:0.0
OUI-10025:Unable to start an interactive install session because of the following error:Can't connect to X11 window server using '192.168.1.110:0.0' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
OUI-10026:Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh: % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
OUI-10027:To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
% <full path to xclock... see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for 'xclock': '/usr/X11R6/bin/xclock'
--------------------------------

Error in invoking target 'client_sharedlib' when installing Oracle on Linux

Hi ,
im tring to install Oracle 10g R2 on CentOS 6 on 64bit server ,
the error below displays when it's 80 % already installing:
Error in invoking target 'client_sharedlib' of makefile '/u01/app/oracle/oracle/product/10.2.0/db_1/network/lib/ins_net_client.mk.
below is the last lines of my $ORACLE_HOME/install/make.log
make: *** [client_sharedlib] Error 1
/usr/bin/make -f ins_net_client.mk client_sharedlib ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1//u01/app/oracle/product/10.2.0/db_1/bin/genclntsh
/usr/bin/ld: skipping incompatible /u01/app/oracle/product/10.2.0/db_1/lib/libsql10.a when searching for -lsql10
/usr/bin/ld: cannot find -lsql10
collect2: ld returned 1 exit status
genclntsh: Failed to link libclntsh.so.10.1
make: *** [client_sharedlib] Error 1
/usr/bin/make -f ins_net_client.mk client_sharedlib ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1//u01/app/oracle/product/10.2.0/db_1/bin/genclntsh
/usr/bin/ld: skipping incompatible /u01/app/oracle/product/10.2.0/db_1/lib/libsql10.a when searching for -lsql10
/usr/bin/ld: cannot find -lsql10
collect2: ld returned 1 exit status
genclntsh: Failed to link libclntsh.so.10.1
make: *** [client_sharedlib] Error 1
"/u01/app/oracle/product/10.2.0/db_1/install/make.log" 126L, 8147C
Please, Help meeeee!!!!

user11309581 wrote:
Hi ,
im tring to install Oracle 10g R2 on CentOS 6 on 64bit server ,
10gR2 is de-supported - plus CentOS is not a certified distro, so things may or may not work - http://download.oracle.com/docs/cd/B19306_01/install.102/b15668/toc.htm#BABIAECC
the error below displays when it's 80 % already installing:
Error in invoking target 'client_sharedlib' of makefile '/u01/app/oracle/oracle/product/10.2.0/db_1/network/lib/ins_net_client.mk.
below is the last lines of my $ORACLE_HOME/install/make.log
make: *** [client_sharedlib] Error 1
/usr/bin/make -f ins_net_client.mk client_sharedlib ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1//u01/app/oracle/product/10.2.0/db_1/bin/genclntsh
/usr/bin/ld: skipping incompatible /u01/app/oracle/product/10.2.0/db_1/lib/libsql10.a when searching for -lsql10
/usr/bin/ld: cannot find -lsql10
collect2: ld returned 1 exit status
genclntsh: Failed to link libclntsh.so.10.1
make: *** [client_sharedlib] Error 1
/usr/bin/make -f ins_net_client.mk client_sharedlib ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1//u01/app/oracle/product/10.2.0/db_1/bin/genclntsh
/usr/bin/ld: skipping incompatible /u01/app/oracle/product/10.2.0/db_1/lib/libsql10.a when searching for -lsql10
/usr/bin/ld: cannot find -lsql10
collect2: ld returned 1 exit status
genclntsh: Failed to link libclntsh.so.10.1
make: *** [client_sharedlib] Error 1
"/u01/app/oracle/product/10.2.0/db_1/install/make.log" 126L, 8147C
Please, Help meeeee!!!!Try installing on a certified distro such as Oracle Enterprise Linux - free download at http://linux.oracle.com
HTH
Srini

Oracle Enterprise Linux 6.1 Installation Fails during Disk Partitioning

Hi,
I've tried to install Oracle Enterprise Linux 6.1 by creating a Virtual Machine using Oracle VM Virtual Box in my laptop with Window XP host OS (NTFS filesystem), by following the below steps.
1) Installed Oracle VM Virtual Box
2) Created a new Virtual machine using a virtual box by specifying the two .iso images i.e OracleLinux-R6-U1-Server-i386-dvd.iso and boot.iso as the boot device and by specifying the following Disk files (.vdi) as follows.
2.1) Oracle_Enterprise_Linux_6_1_Root_Disk_1.vdi - For the / (i.e Root) partition - Dynamically expanded storage - 10 GB - ext4
2.2) Oracle_Enterprise_Linux_6_1_Swap_Disk_1.vdi - For the swap partition - Dynamically expanded storage - 10 GB - swap
2.3) Oracle_Enterprise_Linux_6_1_User_Disk_1.vdi - For the /usr partition - Dynamically expanded storage - 20 GB - ext4
2.4) Oracle_Enterprise_Linux_6_1_Home_Disk_1.vdi - For the /home partition - Dynamically expanded storage - 10 GB - ext4
But while installing OEL 6.1 after specifying the partitions, the installer get hung and throws an error as bug while creating the ext4 filesystem on /dev/sda1.
I tried to specify the default 8 GB for all the above four partitions, the installer successfully continues without any issues. But if i specify any partition more than 8 GB, it fails.
Is there anyway I can solve this problem by creating the above specified partitions with the above size ? Why does it fail if i specify any size more than 8 GB ?
Thanks
Harish

8 GB is a common limit for systems were the boot loader or system BIOS imposes an addressable space limit for the boot partition. In such situations, the system boot partition has to fit within the first 8 GB physical boundary of the harddrive.
Your setup seems a bit unusual. Why do you create separate disks for each Linux partition?
Normally the Linux installer creates necessary partitions on the disk, including a /boot partition that is usually only 100 MB in size.
What are you doing with boot.iso? You should be able to start the system from the main installation DVD or .iso image. You might also want to install x86_64 Linux, unless your hardware is really very old and does not support the 64-bit extension. You can run 32-bit software on a n 64-bit OS, but not the other way around and you will limit your software to 32-bit only.

Oracle 10g for Linux x86_64 download problem

Hi all!
Due to security restrictions in our company, I can't download these two files from download.oracle.com - this
http://download.oracle.com/otn/linux/oracle10g/10201/10201_database_linux_x86_64.cpio.gz
and this -
http://download.oracle.com/otn/linux/oracle10g/10201/10201_companion_linux_x86_64.cpio.gz
because they have .gz extension. Has anyone have got theirs, - would you be so kind to rename files to .zip and share for two-three days till I download theirs to my desktop?
Thanks in advance.
Sincerely yours,
Maksym.
P.S. Sorry for my English.

I think the user community can't help you, the only guess I have is address this issue to the OTN Members Services forum:
Downloads Issues

Where to download openmotif for oracle enterprise linux?

Hello,
I am in the process of installing OEM Grid 10204 on Linux 2.6.18-128.el5 on Oracle Enterprise Linux. I am checking the packages required for installation and I need openmotif21-2.1.30-11. Where can I download openmotif21-2.1.30-11 and its dependencies from Oracle website? Can I download this package from another non-oracle website? Thank you in advance.

If you have Oracle Enterprise Linux media CD you can mount it, find the RPMs directory and install
rpm -Uvh openmotif21-2.1.30-9.RHEL3.6.i386.rpm
or you can download the RPM for RHEL from internet, that should works too.

Where to download Oracle Redhat Linux 4 Rpms

Hi,
Where i can down load
Oracle Enterprise Linux 4
<ul><li>glibc-2.3.4-2.25 </li>
<li>glibc-common-2.3.4-2.25 </li>
<li>binutils-2.15.92.0.2-21 </li>
<li>compat-libstdc++-296-2.96-132.7.2 </li>
<li>gcc-3.4.6-3 </li>
<li>gcc-c++-3.4.6-3 </li>
<li>libgcc-3.4.6-3 </li>
<li>libstdc++-3.4.6-3 </li>
<li>libstdc++-devel-3.4.6-3 </li>
<li>openmotif21-2.1.30-11.RHEL4.6** </li>
<li>pdksh-5.2.14-30.3 </li>
<li>setarch-1.6-1 </li>
<li>make-3.80-6.EL4 </li>
<li>gnome-libs-1.4.1.2.90-44.1 </li>
<li>sysstat-5.0.5-11.rhel4 </li>
<li>compat-db-4.1.25-9 </li>
<li>control-center-2.8.0-12.rhel4.5 </li>
<li>xscreensaver-4.18-5.rhel4.11 </li>
<li>libaio-0.3.105-2 </li>
<li>libaio-devel-0.3.105</li>
</ul>
I am confusing, Please let me know where i can download above RPMS

Nice idea. Applies for me as well.
Anyway, if you'd like to use the Oracle Support for the Linux, I would not mix the rpm distributions.
Another note about the versions, if they are newer in the distribution, then use them. Works for me quite well.
--olaf

ORACLE ON LINUX DOWNLOAD

I downloaded Linux Oracle 9i.
Now they say it is only a single-user software.
What do they mean?
Can I intall it on my server and have a limited number of clients from it?
Can I make users and assign specific tasks to them?

Raja Mukherjee (guest) wrote:
: I am trying to download oracle on linux shippigversion....First
: tyr 69MB, second try 92 MB and third try 44.7 MB. Each time the
: the FTP server is disconnecting me....what is going on!!!
if you would use a real ftp client (i.e. the standard ftp
program provided with every linux distribution) you could just do
a reget after getting disconnected. (see man ftp(1))
: Also I
: saw there are 7 files in the Oracle FTP server named 805ship.1
: through 805ship.7.Can I download them individually?
of coz thats what they are for...
: If o, how do I put
: them together?
just do a
cat 805ship.? > 805ship.tgz
and voila...
null

Yast installation problem on Oracle Enterprise Linux Rel 5 Upd 2

Hi,
I installed Oracle Enterprise Linux Rel 5 Upd 2 on a new server (Intel 64 bit) with the downloads from oracle
(Enterprise-R5-U2-Server-x86_64-disc1.iso till Enterprise-R5-U2-Server-x86_64-disc6.iso).
Then I wanted to install Yast for administering my machine and downloaded yast_el5_x86_64.tar, again from Oracle. Running the Yast install routine it required the perl-Digest-SHA package. I downloaded that from Oracle ULN and installed it.
Now, running the Yast install routine again, I get a bunch of warnings and errors about failed dependencies and NOKEY's.
Here I copied a part of it:
warning: liby2util-2.13.8-0.12.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: blocxx-1.0.0-17.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: libxcrypt-2.4-12.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: testutf8-1.0-1.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: yast2-core-2.13.39-0.3.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: hwinfo-13.57-2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: yast2-hardware-detection-2.13.7-0.9.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: libzypp-2.15.10-0.4.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies
+     libboost_filesystem.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+
+     libboost_regex.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+
warning: yast2-pkg-bindings-2.13.117-0.13.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+     libzypp >= 2.4.0 is needed by yast2-pkg-bindings-2.13.117-0.13.x86_64+
+     libzypp.so.215()(64bit) is needed by yast2-pkg-bindings-2.13.117-0.13.x86_64+
warning: yast2-2.13.104-1.0.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+     yast2-pkg-bindings >= 2.13.111 is needed by yast2-2.13.104-1.0.x86_64+
warning: yast2-network-2.13.98-0.7.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+     yast2 >= 2.13.90 is needed by yast2-network-2.13.98-0.7.x86_64+
warning: perl-Parse-RecDescent-1.80-259.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: perl-gettext-1.05-13.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: perl-X500-DN-0.28-133.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: yast2-pam-2.13.5-0.11.noarch.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+     yast2 is needed by yast2-pam-2.13.5-0.11.noarch+
warning: yast2-mail-aliases-2.13.8-0.11.noarch.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+     libzypp.so.215()(64bit) is needed by yast2-perl-bindings-2.13.11-0.17.x86_64+
+     yast2 is needed by yast2-security-2.13.7-0.11.noarch+
+     yast2-pam is needed by yast2-security-2.13.7-0.11.noarch+
+     yast2 is needed by yast2-ldap-client-2.13.27-0.11.noarch+
+     yast2-network is needed by yast2-ldap-client-2.13.27-0.11.noarch+
+     yast2-pam >= 2.13.5 is needed by yast2-ldap-client-2.13.27-0.11.noarch+
+     yast2 >= 2.13.70 is needed by yast2-country-2.13.52-0.9.x86_64+
+     yast2 >= 2.13.85 is needed by yast2-installation-2.13.192-0.4.noarch+
+     yast2-network is needed by yast2-installation-2.13.192-0.4.noarch+
+     yast2-pkg-bindings >= 2.13.101 is needed by yast2-installation-2.13.192-0.4.noarch+
+     yast2 is needed by yast2-users-2.13.55-0.4.x86_64+
+     yast2-pam is needed by yast2-users-2.13.55-0.4.x86_64+
What's wrong here and what is to do?
I only installed packages from Oracle on a newly installed machine. And I didn't find documentation regarding these problems.
Any help would be greatly appreciated,
Roger

error: Failed dependencies
+ libboost_filesystem.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+
+ libboost_regex.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+As error message clearly states you need to install additional OS packages (included in installation media or in online repository) to solve the dependencies.

Oracle 11g installation on Oracle Enterprise Linux, 64bit version.

Hi
I want to install oracle 11g on Oracle Enterprise Linux, 64bit version.
Do I need to set kernel parameters in this operating system, since it is not standart Linux editions.
or
Can I have a step by step documentation for installing oracle 11g on this operating system?

Hello,
Yes you do need to set kernal parameters in order to meet pre-requisites, otherwise your installation will fail and oracle might not work or unstable.
Here is the best place to find out stepwise installation instruction and kernel parameter configuration
Quick Installation Guide*
http://download.oracle.com/docs/cd/B28359_01/install.111/b32285/toc.htm
Kernel parameter configuration*
http://download.oracle.com/docs/cd/B28359_01/install.111/b32285/toc.htm#CEGFBCFD
You can use this tutorial to install oracle 11g*
http://www.oracle.com/technology/obe/11gr1_db/install/dbinst/dbinst.htm#o
Regards

8.0.1.5 Download fails on install

Aloha -
I downloaded the Linux 8051EE for Linux and my
installation hangs on the copy of tnsping off
of the CDROM I made. I took the original tar I
downloaded and made two seperate CDS and they
both hang in the same place.
Anyone else experience this?
I am desperately seeking Oracle for Linux up to
date but Oracle won't send me the CD and the
Technet download fails.
HELP!!!
Thanks in advance,
Brett
null

the JNLS exception is a known bug. it can be ignored and the dbassist utility will work as best can be expected. as a tip, if you are not using OFA, at the end of the dbassist process - don't select the option to create a database straight away - choose the option to save it all as scripts. then check through those before you make your database with them.

Choosing oracle for linux ! what are merits and demerits

we are going to choose oracle for linux for our e-commerce site which will serve as search engin and shopping mall.

Thanks cgawoods for the advice...
I followed all the steps that you mentioned... Installing the Oracle client proved to be easy as pie on the Linux server, and connecting to the Oracle instance on the NT server was instantaneous with sqlplus... tnsping also finds the Oracle server without a hitch.
I also made the modifications to the coldfusion start script you mentioned, i.e. setting ORACLE_HOME, etc (which is also mentioned in Allaire's docs).
However.... (yes, here it comes) The DSN still comes up as 'failed' when I try to add a new one using the native drivers in the Coldfusion Administrator.
Do I need to do anything on the Oracle server side (NT) first in order to get things working?
I'm pretty stumped at this point as to why this won't work.
Thanks
DH
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by cgawoods ():
I've done Cold Fusion installs on Solaris 2.6, and am an OCP DBA. If you download the Oracle 8.0.5 EE (RedHat 5.2) or Oracle8i EE(Redhat 6.0-6.2) Server programs, you may use the "Server" installation as an Oracle Client. Once you get Oracle installed, you will need to configure the tnsnames.ora file to point to your remote database. Then, you will need to point Cold Fusion to the $ORACLE_HOME where you installed the Oracle Server software. You will want (and probably need) to use the "native" oracle driver for Cold Fusion instead of the ODBC driver. Once the Oracle installation is complete, and you can "tnsping" the Oracle instance on NT, you should be able to configure Cold Fusion to talk to your Oracle database. It's just a matter of reading Allaire's documentation on configuring Cold Fusion for use with Oracle at that point.<HR></BLOCKQUOTE>
null

Oracle on Linux install

After downloading the three Oracle on Linux disks, reading the installation instructions, making accounts, mount paths, etc. I run the installer and everything goes well until I receive this one error. The error says:
Error in writing to file
/u01/app/oracle/product/9.0.1.0.0/assistants/dbca/templates/Data_Warehouse.dfj
I believe that because of this error the install fails. I also get several errors with makefiles and linking if that is relevant (I can also post those errors).
The system I am trying to install this on is a SGI 1100 (RedHat 7.2, 512 MB RAM, Dual P3 800 MHz CPUs). Thanks in advance.
Glenn

After downloading the three Oracle on Linux disks, reading the installation instructions, making accounts, mount paths, etc. I run the installer and everything goes well until I receive this one error. The error says:
Error in writing to file
/u01/app/oracle/product/9.0.1.0.0/assistants/dbca/templates/Data_Warehouse.dfj
I believe that because of this error the install fails. I also get several errors with makefiles and linking if that is relevant (I can also post those errors).
The system I am trying to install this on is a SGI 1100 (RedHat 7.2, 512 MB RAM, Dual P3 800 MHz CPUs). Thanks in advance.
Glenn

Installation problem oracle 11g R2 on oracle enterprise linux 5 update 5

hello support,
i've installation problems with oracle 11g R2 on oracle enterprise linux 5 update 5. In the section "ORACLE Net-Konfigurationsassisten" the failure "[INS-20802] Oracle NET-Konfigurationsassistent not success". What's wrong? I've followed the instructions on http://www.oracle.com/technology/pub/articles/smiley-11gr1-install.html
I've heard the problem can occur with problems in /etc/hosts? My /etc/hosts is configured:
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1          oracle localhost.localdomain localhost
::1          localhost6.localdomain6 localhost6
is this ok? what can I do to bring the database-installation to success?
Thank's for help ;-)
Edited by: user5782904 on 09.05.2010 14:06

Here I paste you the configuration of my latest linux box which has a similar environment like yours.
# hostname
vmrhel6032.quist.ch
# domainname
(none)
# cat /etc/hosts
192.168.1.205 vmrhel6032 vmrhel6032.quist.ch
127.0.0.1     localhost localhost.localdomain localhost4 localhost4.localdomain4
::1           localhost localhost.localdomain localhost6 localhost6.localdomain6
# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=vmrhel6032.quist.ch
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
HWADDR=00:0C:29:6A:98:70
ONBOOT=yes
NETWORK=192.168.1.0
NETMASK=255.255.255.0
IPADDR=192.168.1.205
#Thanks to your post I noted that the hostname consist already of my domain entry. Try your configuration first without domain entry. It should look like:
# hostname
vmrhel6032
# domainname
(none)
# cat /etc/hosts
192.168.1.205 vmrhel6032
127.0.0.1     localhost localhost.localdomain localhost4 localhost4.localdomain4
::1           localhost localhost.localdomain localhost6 localhost6.localdomain6
# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=vmrhel6032
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
HWADDR=00:0C:29:6A:98:70
ONBOOT=yes
NETWORK=192.168.1.0
NETMASK=255.255.255.0
IPADDR=192.168.1.205
#Otherwise use the first example and don't forget to restart your server resp. the network service. ;)

Oracle 9i Linux amd64 download fails

Similar Messages

Maybe you are looking for