Oracle 9i Lite SYNC Error in PALM

Hi,
I have Installed Oracle 8.1.6 Server in a Machine & Oracle 9i Lite 5.0 in a Machine, when i try ro connect & SYNC with my PALM Device OS 3.5 i get a [CNS-2000] Server send Error - 9025:0
Message, check log in the PALM device using mSYNC.
I have installed the Patchset 5.0.0.4 and have done all the settings related to the configuration.
Kindly help as it is very urgent to establish the connection SYC between the PALM & the Oracle.
Thaks & Regards,
Viswanathan

If this is happening on the upload of the data from the client, it is normally due to a mismatch between the DDL of the publication item and the corresponding in queue table (CFM$WTGPI_nnnnn).
Have you made changes on the server to the table/view definitions?
If so then have you re-published? If there is data in the in queue or error queue it will sometimes not refresh the mobileadmin tables with the changed columns/data types, although if you use API's i believe you may be ok. If there is no mismatch on the server, what about the format of the table on the client? it may be trying to upload some changes

Similar Messages

Oracle 10g Lite-Sync Error

Hi,
I am Using Oracle 10g"Lite" Database, I am doing manual SYNC Process.
Today I started the manual Sync Process i Got this Error Message in the Screen "POL-3201 Invalid Slot Number"
I referred a document Shows this information
POL-3201 Invalid slot number
Cause: Internal error caused by referencing an object that has been deleted. Each
object in the database, such as a row has a unique object identifier (OID) that
identifies the location of the object in secondary storage. Each database file is
divided into fixed size chunks called disk pages. An OID can become invalid
when the:
■ disk page being referred by the OID does not exist in the database file.
■ physical read or write of the disk page fails due to an operating system related
error.
■ address of the object (as indicated by the internal encoding in the OID) in the
disk page is outside the page.
■ object is not found in the page.
But i did not delete any thing in the Lite database.
Yesterday the Manual SYNC was Successful ...After i did not touch the Lite Database.Today I started the SYNC and i Got the Error.
Did any one face this error?
Please advice on this Error
Thank U for the Useful Information
SHAN

See if following OTN forum thread helps...
Re: POL-3011/3012 when database is on SD Card.

Oracle Lite Sync error

Im getting the following error when sync. ???? Cant trace it please help
Sync session exception stack trace:
java.sql.SQLException: ORA-00932: inconsistent datatypes: expected DATE got NUMBER
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:189)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:242)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:554)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1478)
     at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:888)
     at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:2077)
     at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1987)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2704)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:458)
     at oracle.lite.sync.Subscription.execPrepUpdate(Unknown Source)
     at oracle.lite.sync.DmlProcessorM.executeInsertUpdate(Unknown Source)
     at oracle.lite.sync.DmlProcessorM.executeInsertUpdate(Unknown Source)
     at oracle.lite.sync.DmlProcessorDB.reExecuteDml(Unknown Source)
     at oracle.lite.sync.DmlProcessorDB.flushIs(Unknown Source)
     at oracle.lite.sync.HeliosSession.startSession(Unknown Source)
     at oracle.lite.sync.resume.Client$1.run(Unknown Source)
     at oracle.lite.sync.resume.ThreadPool$PoolTask.run(Unknown Source)

I know the Database Mobile Server (inc. legacy Database Lite) forum doesn't get a lot of traffic but it really is the best place to ask Lite questions. It is an entirely different product from the real database and as such requires specialist knowledge.
At the very least you should cross-post these questions there. I'm not normally a fan of duplicate postings but I make exceptions for these cases.
Good luck, APC

Oracle 8i Lite: TNS error (ORA-12203)

Hi,
I Have Installed oracle 8i Lite for win 98/and palm operating system on a WIN 98 , pentium III machine. THE INSTALLATION IS SMOOTH. I am able to see the database and users through the Oracle Navigator. But when i try to connect through sql*plus i get
TNS-12203 TNS:unable to connect to destination error
1)How to find whether oracle services are runnong or not?
2)how to start listener on this 8i lite
3)I have also tried creating service name with bequath protocol
nothing works
Pls Help. Any lead is appreciated

Hi
Your oracle database and forms are installed on different oracle home so when you configurate your sql net that time you are configurating only your oracle database. So for form you must be having different oracle home. you cand change thid from start/oracle inatallation products/home selecter. so change our home and run the form. and if still having problem than check for tnsnames.ora file you must be having two files and both must be having right configuration.
thanks

Oracle Database 10g Lite -- SYNC Error

Hi,
I am Using Oracle Database 10g Lite.While doing the Sync Process With the Mobile Server i am getting following error message in my Ol_SYNC.log file
"SUCCESS",0,"03/09/2009 18:02:36","","New2008"
"ERROR",POL-3011,"03/10/2009 12:27:54","a device read error was detected:",""
"SUCCESS",0,"03/10/2009 13:20:12","","New2008"
What i did is ....
First I Download the Client New2008 from Mobile Server
Second I done some DML operation in that Downloaded File (in the forms of *.odb and *.obs)
Third I start to SYNC that Client "NEW2008"
Sync process is web based only .....
after the SYNC process Completed i got the log off Screen in MY Internet Explorer
i always check the ol_sync.log file for the confirmation( about the SYNC) and i got the error message in that file as mentioned above.
Error is Releated what ?
Any Advice
Thanks
SHAN

See if following OTN forum thread helps...
Re: POL-3011/3012 when database is on SD Card.

10g Lite SYNC Error -- POL-3201 "Invalid Slot Number"

Hi,
I am Using Oracle Lite 10g R3, I am doing manual SYNC Process.
Today I started the manual Sync Process i encountered the Error Message in the Screen "POL-3201 Invalid Slot Number"
Oracle document States that
POL-3201 Invalid slot number
Cause: Internal error caused by referencing an object that has been deleted. Each
object in the database, such as a row has a unique object identifier (OID) that
identifies the location of the object in secondary storage. Each database file is
divided into fixed size chunks called disk pages. An OID can become invalid
when the:
■ disk page being referred by the OID does not exist in the database file.
■ physical read or write of the disk page fails due to an operating system related
error.
■ address of the object (as indicated by the internal encoding in the OID) in the
disk page is outside the page.
■ object is not found in the page.
Has anyone faced this error and resolved it successfully?
Please advice.
Thank U
SHAN

Hi,
I am getting the following information in the debug file
CONNECT SQL sipdb=72310728
cmd:SELECT CONSTRAINT_NAME,TABLE_NAME FROM ALL_CONSTRAINTS WHERE CONSTRAINT_TYPE='R'
cmd:SELECT CONSTRAINT_NAME,TABLE_NAME FROM ALL_CONSTRAINTS WHERE CONSTRAINT_TYPE='U'
14:23:34.511 startOfPublication()end
Error at C:\ADE\omeprod_ol103021\olite\db\build\win\ocapi\..\..\..\src\ocapi\processop.cpp line:735 rc:-3201
Build date Nov 18 2008
okErr=(invalid slot number)
mess=(SYS_LSI_AGE)
AddLog(-3201 "ERROR",POL-3201,"04/30/2009 13:24:28","invalid slot number:SYS_LSI_AGE","DURBAN2008")
14:23:34.527 ROLLBACK OKAPI conscli
ROLLBACK SQL sipdb
ROLLBACK OKAPI sipdb
14:23:34.527 okDis(env=3816c84)
DISCONNECT OKAPI conscli okEnv=3816c84
14:23:34.527 okFinal 0
14:23:34.527 DISCONNECT SQL sipdb
14:23:34.527 okDis(env=4454fac)
DISCONNECT OKAPI sipdb okEnv=4454fac
Free SQL ENV
14:23:34.527 okFinal 0
DoProcess()=-3201
in prepareErrorReport
m_okEnv=4454fac
okSetTimeout(20000)=0
getDsnAttribute0(DURBAN2008_conscli)=0
14:23:34.527 okConnect1()... 14:23:34.543 okConnect1(F:\mobileclient\oldb40\DURBAN2008\conscli.odb)=2633737
CONNECT OKAPI conscli=2633737 okEnv=4454fac
makeFnameBase(00000000000000000)
BeginTranz(0 0)
EndTranz nDirty=2
EndTranz(0 0)
14:23:34.543 okDis(env=4454fac)
DISCONNECT OKAPI conscli okEnv=4454fac
14:23:34.636 okFinal 0
ocDoSyncronize done 14:23:34.636
Please Advice
Thank U
SHAN

Oracle 8i Lite 4.0.2.0 & Satellite Forms 3.1

Hello,
I'm a french developper and I'm working on a software prototype on
PalmPilot. A drug dispensing software from TGS IN SITU that enables
medical prescription management on Palm with application developped
with Satellite Forms and data stored in Oracle 8.1.5 database.
I-The configuration on my Windows NT WS plattform
1.Oracle Server 8.1.5
2.Oracle 8i Lite for handheld device (Palm)
II-The mecanism transport : http
1.I used Web-to-go listener "http.bat"
2.Win NT RAS sevice for TCP/IP
3.iConnect Consolidator Server for replication "mgp.bat"
III-The Palm device
1.Consolidator Client for Palm : "ConsolidatorClient.prc"
2.Satellite Forms application files (*.prc and *.pdb)
3.OracleLauncher file for the HTTP conduit "OracleLauncher.prc"
IV-Schema creation with JAVA API
1.Creation of one master table NAMES with 2 fields and a primary key
constraint on the Oracle 8.1.5 DB server.
2.Creation of Consolidator Objects (Clients,Publications,Publication
Items,Subscription,...) in java file.
3.Execution of a script similar to the one provided by Oracle
"consolidator_install.bat" to initialize connection and to run
SQL script to fill the table NAMES.
V-Problem
First I start http.bat and mgp.bat.
After connecting my Palm with Network preferences menu in TCP/IP mode.
I start ConsolidatorClient on the Palm side with the correct IP adress.
I did not manage to have a correct SyncProgress at the end of the
composing part. I receive a "reader/writer error" and a sync failed.
Christophe

This is where we got the latest version:
ftp://oracle-ftp.oracle.com/server/patchsets/wgt_tech/olite/400223/
Sarah Hodge
Apex Systems, LLC
Tukwilla, WA 98188
206.241.9119

Oracle 8i Lite - Palm sync

Hello,
Does anybody has successfully run a HotSync synchronization between an Oracle lite 8i on a Palm and an Oracle 8i EE?
The Hotsync process always gives errors in my environment.
----- (from the hotsync log)
OK Memo Pad
Unable to initialize threads: Tzan (this text is scrambled)
Cab't create Java VM
OK Oracle with 2 message(s)
I have:
- Palm III, with PalmOS 3.0.3
- PalmDesktop 3.0.1
- Oracle 8i EE on Win2k
Any idea?
thanks
zlatko

Perhaps you can explain to me how you get the SAMPLE application to work. I deleted the C$ALL_APPS file from my Palm and the OrdersODB file which it generates when you click the okDemo application on the Palm.
Now, when I connect with Consolidator using Hotsync I get this error message:
HotSync operation started 01/16/00 15:59:44
Date Book - sync configured to Do Nothing
Address Book - sync configured to Do Nothing
To Do List - sync configured to Do Nothing
Memo Pad - sync configured to Do Nothing
java.sql.SQLException: ORA-01017: invalid username/password; logon denied
at oracle.jdbc.ttc7.TTIoer.processError(Compiled Code)
at oracle.jdbc.ttc7.O3log.receive1st(Compiled Code)
at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:191)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:127)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:148)
at java.sql.DriverManager.getConnection(Compiled Code)
at java.sql.DriverManager.getConnection(DriverManager.java:126)
at oracle.lite.sync.Consolidator$Server.newConnection(Consolidator.java:335)
at oracle.lite.sync.Consolidator$O8Server.newConnection(Consolidator.java:781)
at oracle.lite.sync.HeliosSession.executeA(Compiled Code)
at oracle.lite.sync.HeliosSession.<init>(Compiled Code)
at oracle.lite.sync.HotSyncSession.RunTime(HotSyncSession.java:32)
OK Oracle with 1 message(s)
System - sync configured to Do Nothing
I created the database connection in Oracle8 Navigator and connected to it successfully with user name S11U1 and password MANAGER.
So, what's going on? I have my username/password correct don't I?
I get an error log on the Oracle Consolidator Log of:
[CNS-1004]:100
[CNS-1004]:-511
How do I solve this?
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Kevin Mukhar ([email protected]):
I'm not sure why you're getting that
particular exception. I don't think I've
experienced that one.
As to permissions, you need to do that on
the SERVER database.
Using SQL*Plus, you would connect to the server
database using the username for the tables
and then use GRANT ALTER...
Using Oracle Navigator, click on the Database
Connections folder, and then create a
connection to the database. After creating
the connection, connect to the database. Find
the table, right-click on the table and
select properties from the menu. On the
properties dialog, click the Object Privileges
tab and set the privileges.
K Mukhar<HR></BLOCKQUOTE>
null

Problem sync Satellite Forms data with Oracle 8i Lite through iConnect Consolidator.

I receive following exception in the hotsync log:
java.lang.Exception: Compose raw metadata not implemented for SMSE
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at oracle.lite.sync.palm.SMRL4PRecord.composeRawMetaData(SMRL4PRecord.java:126)
at oracle.lite.sync.HeliosSession.<init>(Compiled Code)
at oracle.lite.sync.HotSyncSession.RunTime(Compiled Code)
OK Oracle with 1 message(s)
This is when I after installed the satellite forms performes a sync.
I use PalmV with PalmOS 3.3, performes the sync with HotSync through iConnect Consolidator for Oracle 8i Lite 4.0.0.2.0
In the Satellite Forms App Designer I have check the Oracle Lite option in the property form.
This happends for both the sample forms and the one I have created.
I use the Satellite Form 3.0 beta 2, is there a new release and where can I find it ?
Anyone with any ideas to solve this ?
Thanks in advance !
/Patrik

Hello Patrik,
Did you resolved this problem ? I have the same error message. Please, let me know what i can do.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Patrik Strid ():
I receive following exception in the hotsync log:
java.lang.Exception: Compose raw metadata not implemented for SMSE
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at oracle.lite.sync.palm.SMRL4PRecord.composeRawMetaData(SMRL4PRecord.java:126)
at oracle.lite.sync.HeliosSession.<init>(Compiled Code)
at oracle.lite.sync.HotSyncSession.RunTime(Compiled Code)
OK Oracle with 1 message(s)
<HR></BLOCKQUOTE>
null

Oracle 9i Lite and Satellite Forms on the Palm

I would like to use Oracle 9i Lite 5.0.1with Satellite Forms EE 4.1 on the Palm
The docmentation from each company refers to the other company's documentation and no instructions seem to
exist. I am begining to suspect that to abilty to use Satellite Forms and Oracle Lite on the Palm does not actually
exist and that one must develop applications in C using Code Warrior or other tools.
I would like to use a Satellite Forms application on the Palm running with the RDK to access and store tables
stored in an Oracle Lite database on the Palm. I would then use the MSYNC to move data from the palm to
my Oracle 8.1.7 database server
Satellite Forms appears to store each of its tables as a separate pdb but oracle uses a single pdb for a database
containing multiple tables. There is a check box for Oracle compatible tables but not method to associate
satellite forms tables with an Oracle Lite database except for a link to an ODBC database. The Oracle ODBC drivers
point either to the Oracle database server or to an Oracle Lite database on a PC but not on a Palm.
I can move Satelittle Forms tables from the Palm to Oracle 8.1.7 using ODBC on the PC when I do a Palm Hot Sync
using the Satellite Form conduit
I can move Oracle tables from the Palm to 8.1.7 using MSYNC, the Oracle Mobile Server, and the Oracle Lite
http conduit
I do not know how to move Satellite Forms tables on the Palm to Oracle Lite tables on the Palm.
The only way to use Satellite Forms appears to be to move Satellite Forms tables on the Palm to Oracle Lite tables
on the PC and then use Oracle Lite Msync on the PC to move the data to the Oracle server. This seems to have no
advantage over going from Satellite Forms directly to the Oracle Server via ODBC
Does anyone have any additional information about current or future capabilities. There may have been something that
worked with older versions of Oracle 8iLite 4.0 and Satellite Forms 3.5, but I do not see anything that works now

According to Metalink Note:207303.1 - Client / Server / Interoperability Support Between Different Oracle Versions you shouldn't have problems, as long as your 9i Clients are at least 9.2.0.4.

Sync Error in lite 10g.

Im getting the following error when sync. ???? Cant trace it please help
Sync session exception stack trace:
java.sql.SQLException: ORA-00932: inconsistent datatypes: expected DATE got NUMBER
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:189)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:242)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:554)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1478)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:888)
at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:2077)
at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1987)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2704)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:458)
at oracle.lite.sync.Subscription.execPrepUpdate(Unknown Source)
at oracle.lite.sync.DmlProcessorM.executeInsertUpdate(Unknown Source)
at oracle.lite.sync.DmlProcessorM.executeInsertUpdate(Unknown Source)
at oracle.lite.sync.DmlProcessorDB.reExecuteDml(Unknown Source)
at oracle.lite.sync.DmlProcessorDB.flushIs(Unknown Source)
at oracle.lite.sync.HeliosSession.startSession(Unknown Source)
at oracle.lite.sync.resume.Client$1.run(Unknown Source)
at oracle.lite.sync.resume.ThreadPool$PoolTask.run(Unknown Source)

If this is happening on the upload of the data from the client, it is normally due to a mismatch between the DDL of the publication item and the corresponding in queue table (CFM$WTGPI_nnnnn).
Have you made changes on the server to the table/view definitions?
If so then have you re-published? If there is data in the in queue or error queue it will sometimes not refresh the mobileadmin tables with the changed columns/data types, although if you use API's i believe you may be ok. If there is no mismatch on the server, what about the format of the table on the client? it may be trying to upload some changes

Error while installing Oracle Database Lite 10.2.0.1.1 for Win

Hello,
I am trying to install Oracle Database Lite 10.2.0.1.1 on Windows XP. I am going according screens on this page:
http://www.oraclebrains.com/2008/07/installing-oracle-database-lite-10g-release-3-mobile-server/
But at Step:12 - Mobile Server repository Wizzard after password enter I get error --- Io exception: The Network Adapter could not establish the connection. May I insert specific password for Username SYSTEM? Or where is problem?
Thanks for hint
David

Hi,
I have the same problem but, how can i know what my SID is ? i am trying with "ORCL" and it doesnt work.
Do you know in which file i can get it ? in the documentation of the installation i found this:
"If you are not sure of the values to enter for the URL, then you can query the data dictionary to obtain these values.
Connect as SYSTEM and run the following queries.
To retrieve the SID, execute: select instance_name from v$instance;
If you need to retrieve the port number, check the listener.ora file on the
back-end database."
But how can i query the database if i have not finished to install it yet and where is located the listener.ora file ?
I hope you can help me.
Thank you.

Oracle 8i lite and palm pilots

So has Anyone been able to get Oracle 8i Lite to work with a Palm Pilot? I've been browing through some of the forums on 8i Lite and some form apps like Satellite Forms and it doesn't seem like anyone has had much success.

We haven't tried 8i Lite on a palmtop. But we are trying to use it over the Internet and we are having some problems. Have you used 8i Lite over the Internet?!?
Thanks..

Oracle 8i Lite and Palm, Windows CE and EPOC

This may be a simple question to developers (which I am not), but we have a client who is seeking advice regarding the use of Palm Pilots, Psion or similar devices for field recording of data.
Their database is Oracle 7.3.4 (soon to be upgraded to 8) with development done in Forms 5. I understand that Oracle 8i Lite enables a database of this vintage to be used in conjunction with the handhelds, but I do not understand the process.
Is Oracle 8i Lite loaded onto the handheld? Or is it used to convert the required tables and forms into cut down versions for the limited use by the smaller device?
What is the role of the host PC for the smaller devices?
I guess - how does it work in layman's terms.
I hope someone can help.
Thanks.

We haven't tried 8i Lite on a palmtop. But we are trying to use it over the Internet and we are having some problems. Have you used 8i Lite over the Internet?!?
Thanks..

Oracle Database LIte 10g installation error

I downloaded Oracle Database Lite 10 g and tried to install it on Windows XP. On Mobile Server Repository Wizard after I type any password for SYSTEM user I receive the error: "Io exception. The Network Adapter could not establish the connection." Can anyone help on this?
Thanks!

Hi user629995
You can find some help on :
http://www.geekpedia.com/KB28_Fatal-error-C1083-Cannot-open-include-file-iostream.h-No-such-file-or-directory-when-trying-to-compile-your-C-or-Cplusplus-code.html
and that
http://www.cplusplus.com/forum/beginner/683/

Oracle 9i Lite SYNC Error in PALM

Similar Messages

Maybe you are looking for