Oracle 9i to 10g

Dear all,
i need to upgrade a database from oracle 9i to oracle 10g but on the different server running on windows nt server and windows 2003 respectively.
how should i do?

Do not worry about because barely is the 8i is going to be desupported at the end of this year.
Joel Pérez

Similar Messages

How to install Oracle Developer Suite 10g on Windows 7 (64-bit)

Hi,
I have windows 7 (64-bit) installed on my laptop. I want to install Oracle developer suite 10g R2 on this machine but when I run the Oracle Universal Installer, it gives me error stating "operating system version: must be 5.0, 5.1, 5.2. Actual 6.1 Failed<<<<
Exiting OUI.
Can anyone please help me to solve this problem.
Thanks in advance.
Regards

Be aware that Developer Suite 10gR2 is not supported for use on Windows 7. Installing it on this platform may result in undesirable behavior.

ORACLE reports Build 10g - Data Model - query - If statement in Alias ?

I have the following select statement. It has the alias Survivors, Deaths and "All
With the ORACLE reports Build 10g - Data Model - I have the following query statement. I require the alias to change. Can the following be done.
Cases". Is it posible to use :P_LANGUAGE variable to say that -- IF :P_LANGUAGE = FRENCH THEN alias are Survivants for survivors, Décès for Deaths, Tous_les_cas for All Cases. Please advise
SELECT ALL T_NTR_MULTIBAR.CAT, T_NTR_MULTIBAR.NUM_CASES_LEFTBAR AS Survivors,
T_NTR_MULTIBAR.NUM_CASES_MIDDLEBAR AS Deaths, T_NTR_MULTIBAR.NUM_CASES_RIGHTBAR AS "All Cases"
FROM T_NTR_MULTIBAR
WHERE INSTANCE_NUM = :P_INSTANCENUM
order by ORDERS

It is no problem, you can automatically change the complete query before the report is running, which delivers you different kind of values. But the alias names does not change in the group of the data-model, although two query are running with different alias names at different times. In the data model you see the alias names of the first implemented select statement, which are the column fields in the layout.

Oracle Upgrade from 10g to 11g [BRANCHED BY MODERATOR]

Hi Deepak/Folks,
Another question that I have is that while doing the Oracle Upgrade on an EP server, the patches were not installed properly and I had to shut down the Patches installation after it did not do anything for a while.
Now when I try to install the patches it fails telling me that the Installed patches cannot be verified, I had written to SAP and they told me to follow the
SAP note 1862446 - Inventory
load failed... OPatch cannot load inventory for the given Oracle Home
and re-create the oracle inventory.
This has also not helped in anyway.
Is there a solution to this problem.
Following is the error that I am getting when I try to Install the patches
Getting pre-run patch inventory...
Getting pre-run patch inventory...failed.
Cannot get pre-run patch inventory.
Refer to log file
$ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_08_06-14-52-51.log
when I open the log file specified here I get the following
more mopatch-2014_08_06-14-52-51.log
more /oracle/<SID>/11203/cfgtoollogs/mopatch/mopatch-2014_08_06-15-01-51.log
MOPatch - Install Multiple Oracle Patches in One Run - 2.1.15.
Copyright (c) 2007, 2013, Oracle and/or its affiliates. All rights reserved.
Version:       2.1.15
Revision:      5.1.2.26
Command-line: /oracle/<SID>/11203/MOPatch/mopatch.sh -v -s SAP11203P_1312-20009978.zip
Oracle Home:   /oracle/<SID>/11203
RDBMS version: 11.2.0.3.0
OPatch version:11.2.0.3.3
Clean-up:      supported
PSUs:          supported
Log file:      $ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_08_06-15-01-51.log
Patch base:    .
Patch source: SAP11203P_1312-20009978.zip
Link script:   ./link.mts<SID>ua.sh
Readmes:       <none>
Strpd. Readmes:<none>
make utility: /usr/ccs/bin/make
unzip utility: /oracle/<SID>/11203/bin/unzip
User name:     ora<SID>
Working dir:   /oracle/stage
System:        HP-UX mts<SID>ua B.11.31 U ia64 2468369872 unlimited-user license
Disk free:     11734549 KBytes on /oracle/<SID>
Disk required: 886496 KBytes on /oracle/<SID>
Getting pre-run patch inventory...
executing: "/oracle/<SID>/11203/OPatch/opatch" lsinventory -retry 0 -xml "./mopatch-187-21696-tmpdir/preinv.xml"
========================================================
GENERIC OPATCH VERSION - FOR USE IN SAP ENVIRONMENT ONLY
========================================================
Oracle Interim Patch Installer version 11.2.0.3.3
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home       : /oracle/<SID>/11203
Central Inventory : /oracle/<SID>/oraInventory
   from           : /oracle/<SID>/11203/oraInst.loc
OPatch version    : 11.2.0.3.3
OUI version       : 11.2.0.3.0
Log file location : /oracle/<SID>/11203/cfgtoollogs/opatch/opatch2014-08-06_15-01-56PM_1.log
List of Homes on this system:
Inventory load failed... OPatch cannot load inventory for the given Oracle Home.
Possible causes are:
   Oracle Home dir. path does not exist in Central Inventory
   Oracle Home is a symbolic link
   Oracle Home inventory is corrupted
LsInventorySession failed: OracleHomeInventory gets null oracleHomeInfo
OPatch failed with error code 73
Getting pre-run patch inventory...failed.
Cannot get pre-run patch inventory. Exiting.
I would appreciate if you folks can help me out on this
Thanks
APS

FOLLOW UP QUESTION BRANCHED:
Oracle Upgrade from 10g to 11g [BRANCHED BY MODERATOR]

Oracle Dev-suite 10g installation on WINDOWS server 2008 R2

Hi Friends,
Is it possible to install Oracle Dev-suite 10g on WINDOWS server 2008 R2.Any idea on this,can you please share.
Best regards,
Rafi.

Hi John,
Is it possible to do this by applying any patches or alternate option.
Best regards,
Rafi.

Installation problem in Oracle Content Server 10g

Hi,
I am trying to install 'ORACLE CONTENT SERVER 10g', as a part of this trying to click on 'Installer.exe' in '/win32'. When i click this installer.exe, it is prompting one COMMAND PROMPT SCREEN and it is disappearing soon. In fact it was suppose to ask language preference as per installation guide.
Dont know how to resolve this issue. please help me out.
Thanks in advance,

pparkko wrote:
With this type of behaviour, you always need to find out the real error.
Try opening a command prompt (cmd) and running the command from the command line.
Then you can see what is going wrong.I have a question, I just upgraded our test 11i database (9i) to 10g (10.2), as a part of that upgraded forms, reports, graphics to patchset 18. Now planning to install 10giAS on appsTier on which forms, Apache and discoverer running. If I install 10giAS in differnet home, how can I get that in to appsTier?, does it mean adapcctl script no longer be used to start webservices?. I haven’t done this before, if my question is stupid, please ignore :).

Oracle Application server 10g installation

Hi,
I have installed oracle 10g Express edition on my Vista home premium.
It will be a great help, if anybody reply me how to access the oracle application server ..... I am new to this installation.
whether I need to install the s/w or I need to configure?
Please help me out.
Thanks,
geetha.
Edited by: user10587613 on Mar 15, 2009 7:32 PM

OK, you can find the software here:
http://www.oracle.com/technology/software/products/ias/htdocs/101310.html
(Choose CD1 for the your platform from "Oracle SOA Suite 10g" row)
Here is the installation guide for Linux that will walk you through the steps to install:
http://download.oracle.com/docs/cd/B31017_01/linux.1013/install/toc.htm
If you are only looking to install Oracle Application Server and not the SOA Suite or Web Center Suite, you still use the above software but choose "Integrated Web Server and OC4J Middle Tier":
http://download.oracle.com/docs/cd/B31017_01/linux.1013/install/topo.htm#CEGEECFH
Hope this will help.
Thanks
Shail

Oracle Application Server 10g Cloning - Urgent

Hello All,
I have been given a new assignment which involves Oracle Applications server 10g, i am new to oracle application server and hoping that some one will please clarify my doubts.
i have to clone a production machine (Solaris 10) which has oracle AS 10g, this machine had oracle database 10g before and just the application server was installed on it, i have to clone a test environment for this machine, i have the following two doubts
1) Is it possible to just install Oracle Application server 10g on a machine which already contains oracle 10g database, if so then what about the database that gets installed when installing Oracle application server 10g.
2) How to clone the above production machine, should the oracle 10g database be cloned first and then oracle application server 10g cloned on the new machine?
Eagerly waiting for a reply

user12077492 wrote:
i have to clone a production machine (Solaris 10) which has oracle AS 10g, this machine had oracle database 10g before and just the application server was installed on it, i have to clone a test environment for this machine, i have the following two doubts
1) Is it possible to just install Oracle Application server 10g on a machine which already contains oracle 10g database, if so then what about the database that gets installed when installing Oracle application server 10g.
2) How to clone the above production machine, should the oracle 10g database be cloned first and then oracle application server 10g cloned on the new machine?1) Yes, it is possible. The DB that comes with OAS as the infrastructure DB for it (I presume you are installing a full OAS with infrastructure and midtier both) does not affect the DB you already have on your system ... obviously ... as long as you install them in their separate homes.
2) I always say, this term cloning is somewhat loosely used in general communication meaning making copies. In OAS context, Cloning works for middletiers only. You cannot clone an infrastructure.
To make a redundant/alternate environment for OAS, you can do the following:
- a) either use the same infra on machine 1, and install another midtier and register with the same infra.
- b) or install a separate infra on machine 2, and also a midtier registered with it.
Here for the first option a), Cloning can be used because you can (*only*) clone a middle-tier. There are pros and cons for this setup, including that you share the SSO, and OID, and hence users and groups bases, etc on those two environments - something that you may or may not want. But then there are also some way-outs to avoid them or minimize their effects too. Please see the following reference for cloning and search on Metalink for how to minimize effects, once you get better familiar with the processes.
Oracle® Application Server Administrator's Guide
10g Release 2 (10.1.2)
B13995-08
[10 Cloning Application Server Middle-Tier Instances|http://download-uk.oracle.com/docs/cd/B14099_19/core.1012/b13995/cloning.htm#BCGBDIDF]
For b), you will need to Stage a server as defined in this reference.
[11 Staging a Test Environment from a Production Environment|http://download-uk.oracle.com/docs/cd/B14099_19/core.1012/b13995/prodtest.htm]
There are some notes on Metalink which address issues about benefits or procedures of Cloning and Staging an environment too.
There are some other ways to export/transport your applications to another instance across DB. Please also read about them.
hope that helps!
AMN

Oracle application server 10g help

Hi,
I need to work on a project that pulls data from the oracle database and should be able to generate reports based on user entered criteria and they want me to use the oracle application server 10g.
(I also need to do manipulations on the data pulled out.)
How do i start and what are the things that i need to install..
If somebody could guide me in a few words, i can pick it up from there...
Thanks

Hi,
Thanks a lot for replying..
This is a simple overview of my project..
Basically i need to convert a client server application which was initially in Access (and coded in VBA) and oracle to oracle based web application.
The application that was built in access has various flaws and hence we decided to rewrite them with lot of new features..
what i would need is several web pages(probably intranet based...) where i pull data from the oracle db, and then do manipulations on them and then based on certain criteria come up with a report based on users needs...
I hope this info is enough to guide me
Thanks.

Oracle Application Server 10g (Application Running)

Dear All Sir/Madam
It is my humble request that please tell me how to run Application on Application Server 10g.
I developed my Application in Oracle developer suit 10g (build internet appliacation), and I am using *10g database*.
Now please tell me the complete procedure who to configure oracle application server 10g on linux.

Hello Ghulam,
Notice that you can deploy different kind of applications within the Application Server framework, e.g. JEE applications, PL/SQL applications, Forms Applications etc. Based on what you initially mentioned, it seems that your have developed a Forms application. The above document reference refers to Application Server 10.1.3, which was a JEE / SOA release. You are probably better off with the [url http://download.oracle.com/docs/cd/B14099_18/web.1012/b14032/toc.htm]Forms Deployment Guide.
One note : Application Server 10.1.2.x is soon to be desupported. Consider to move to version [url http://www.oracle.com/technetwork/developer-tools/forms/downloads/index.html]11.1.2 !
Thanks,
EJ

Installing Oracle Application Server 10g 10.1.2.0.2 on RHEL 5.3

Dear All,
My Linux version is RedHat 5.3
I want to Install oracle 10g Application Server on it please help me out to do so.
Please help me,thanks in advance.
Please provide me with the documentation link to install Oracle Application Server 10g 10.1.2.0.2 on RHEL5.3
Thanks and Regards
Monoj Das

install Oracle Application Server 10g 10.1.2.0.2 on RHEL5.3
Said that OAS 10.1.2.0.2 is desupported, you have to apply patch 10.1.2.3 to be fully certified on OEL/RHEL 5.
See MOS doc. ID 564174.1 Oracle Application Server 10g (10.1.2) Installation Requirements for Linux OEL 5 and RHEL 5

Oracle Application Server 10g Installation Guide for Windows

The link to Oracle Application Server 10g Installation Guide for Windows on the OTN Web Site don't work. Using search on site does not turn up any installation document for Oracle Application Server 10g.
How can I find the Installtion Guide or the Quick Installtion Guide for Oracle Application Server 10g for Windows?

Hi,
The docs you seek are available through the OTN documentation pages at: http://otn.oracle.com/documentation/index.html.
Click on the link for "Oracle Application Server Release 10g (9.0.4)" and then on the "View Library" link for part B10468_04 - Oracle Application Server 10g Online Documentation 10g (9.0.4.0.0) for Microsoft Windows.
The Docs are located under the Documentation tab.
Alternatively, here is the direct link to the Documentation Tab interface of the Library:
http://download.oracle.com/docs/cd/B10468_04/docs.htm
Regards,
Les

Oracle application server 10g and apex

Hi allm
Can someone show me a guide on how to use Oracle Application Server 10g with APEX. I'm currently using Oracle HTTP Server but decided to use OAS instead so that I can use the Report Server and the Oracle BI Publisher for the reports.
I'm currently using this guide (http://www.oracle.com/technology/products/database/application_express/howtos/howto_useoas10g.html) but I can't seem to find the marvel.conf and the oracle_apache.conf.
Also, is it really necessary to use OAS instead of Oracle HTTP Server if I want to use Oracle BI Publisher?
Thanks.
Allen
Edited by: A.Sandiego on Sep 3, 2008 12:01 AM

Hi,
Thanks for the response.
Unfortunately I still get the same problem. Somehow I just can't find the marvel.conf anywhere in my machine. I setup my APEX not by using the companion cd but by downloading the apex_3.1.2 then running the apexins.sql. Then install the Oracle HTTP Server only and configured the dads.conf located in the ORACLE_HTTP_SERVER_HOME/Apache/Apache/mod_plsql/conf. It works perfectly with this.
I then installed Oracle Application Server 10g. I'm trying to figure out how to use this instead of the Oracle HTTP Server.
Thanks.
Allen

Oracle Application server 10g

Hi:
How to check if our system is Oracle Application Server 10g intergrated? It was asked in a patch readme ATG.RUP.6. this is 11.5.10.2 on unix, 10g rdbms. they have SSO. THANKS
Edited by: user9231603 on Feb 11, 2011 6:37 AM

Hi;
For SSO check note Oracle SSO E-Business Suite Applications Integration with Oracle Business Intelligence [ID 553423.1] part Setting SSO Profiles
For OID check svcname parameter in CONTEXT_FILE.. Details can be avaliable at:
Oracle SSO E-Business Suite Applications Integration with Oracle Business Intelligence [ID 553423.1]
Regard
Helios

Oracle Application Server 10g Release 2 (10.1.2.0.2) on 64bit RHEL

HI,
EBS-12.1.3
DB 11gR1
I am Facing following Error: while installing Oracle Application Server 10g Release 2 (10.1.2.0.2) on 64bit RHEL
pwd
pwd
/shared/bishiphome/Disk1/install/linux64
[oravis@erptest linux64]$./runInstaller -ignoreSysPreReqs
Starting Oracle Universal Installer...
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-07-20_08-52-57AM. Please wait ...The Java RunTime Environment was not found at /tmp/OraInstall2011-07-20_08-52-57AM/jdk/jre/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directory
Should i install JRE in the Server
Thanks
Vishwa
Edited by: Vi**** on Jul 19, 2011 10:18 PM
Edited by: Vishwa on Jul 25, 2011 3:30 AM

HI,
Change the above to the following and see if you get any error:
$ /shared/bishiphome/Disk1/install/linux64/runInstaller ignoreSysPrereqs -jreLoc /usr/shared/bishiphome/Disk1/install/linux64/runInstaller ignoreSysPrereqs -jreLoc /usr
Starting Oracle Universal Installer...
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-07-26_08-46-15AM. Please wait ...[oravis@erptest ~]$ Exception in thread "main" java.lang.ClassFormatError: oracle.as.install.engine.modules.install.exception.InvalidInventoryPointerException (unrecognized class file version)
at java.lang.VMClassLoader.defineClass(libgcj.so.7rh)
at java.lang.ClassLoader.defineClass(libgcj.so.7rh)
at java.security.SecureClassLoader.defineClass(libgcj.so.7rh)
at java.net.URLClassLoader.findClass(libgcj.so.7rh)
at java.lang.ClassLoader.loadClass(libgcj.so.7rh)
at java.lang.ClassLoader.loadClass(libgcj.so.7rh)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:488)

Oracle Application Server 10g R3 with patch set 10.1.3.5.0

Hi All,
Can anyone help me on this, When I install Oracle Application Server 10g Release 3 (10.1.3.1.0) and patch set 10.1.3.5.0 on Linux. I am not able to find forms and reports container.
This version doesn't support forms and reports or I have go OAS 10g R2 (10.1.2.0.2) with patch set 3 (10.1.2.3.0). What is the difference between these two releases.
Please help me.
Regards,

Hi James,
1)Yes it supports IE 8 .Please review the below link for certification details on browers :-
    http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html#BAJGCBEA
     Note: Oracle Application Server supports only those browsers.
2)Forms only support Windows 7 32 bit only.
    Please refer to the note:1292919.1 "Certification of Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit)"
3)Could you provide more information of JVM because when you install 10gR2 it has JDK and JRE present in it.
Regards,
Prakash.

Oracle 9i to 10g

Similar Messages

Maybe you are looking for