Oracle 9i upgrade to 10g
Hi
I upgraded sap(SRM) oracle from 9.2.0.8.0 - 64bit Production (AIX) system to oracle 10.2.0.2.0 - 64bit Production by referring document guide: GUIDE_UX_ORA_UPGRADE_210, completed postupgrade activity,
Database is running very fine , could not able to connect the database through SAP, when R3trans -d command executed it gives the following error
RISRCOM5701:psmadm 3> R3trans -d
This is R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname
= 'PSM'"
R3trans finished (0012).
RISRCOM5701:psmadm 4>
Regards,
Harish Shetty
4 ETW000 R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 08.09.2010 - 10:54:46
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Sep 8 10:54:46 2010 71 0.000071
4 ETW000 [dev trc ,00000] db_con_init called 8 0.000079
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 41 0.000120
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/PSM/SYS/exe/run/dboraslib.o' ...
4 ETW000 31 0.000151
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/PSM/SYS/exe/run/dboraslib.o), hdl 0
4 ETW000 3639 0.003790
4 ETW000 [dev trc ,00000] Library '/usr/sap/PSM/SYS/exe/run/dboraslib.o' loaded
4 ETW000 13 0.003803
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/PSM/SYS/exe/run/dboraslib.o
4 ETW000 29 0.003832
4 ETW000 [dev trc ,00000] Version of '/usr/sap/PSM/SYS/exe/run/dboraslib.o' is "640.00", patchlevel (0.199)
4 ETW000 297 0.004129
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/PSM/SYS/exe/run/dboraslib.o
4 ETW000 15 0.004144
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/PSM/SYS/exe/run/dboraslib.o
4 ETW000 30 0.004174
4 ETW000 [dev trc ,00000] New connection 0 created 15 0.004189
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 17 0.004206
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 32 0.004238
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 26 0.004264
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 15 0.004279
4 ETW000 [dev trc ,00000] Got ORACLE_HOME=/oracle/PSM/102_64 from environment
4 ETW000 317 0.004596
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 73 0.004669
4 ETW000 [dev trc ,00000] got NLS_LANG='AMERICAN_AMERICA.WE8DEC' from environment
4 ETW000 26 0.004695
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.US7ASCII 1182 0.005877
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPPSM's password 24 0.005901
4 ETW000 [dev trc ,00000] Connecting as /@PSM on connection 0 (nls_hdl 0) ... (dbsl 640 250407)
4 ETW000 39 0.005940
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 38 0.005978
4 ETW000 [dev trc ,00000] 0 US7ASCII 1 110c66e00 110c6e8e0 110c6e198
4 ETW000 23 0.006001
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 10 0.006011
4 ETW000 [dev trc ,00000] Allocating server context handle 16 0.006027
4 ETW000 [dev trc ,00000] Attaching to DB Server PSM (con_hdl=0,svchp=110c6ff18,srvhp=110c70138)
4 ETW000 58 0.006085
4 ETW000 [dev trc ,00000] Assigning server context 110c70138 to service context 110c6ff18
4 ETW000 32761 0.038846
4 ETW000 [dev trc ,00000] Allocating user session handle 24 0.038870
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=110c6ff18,srvhp=110c70138,usrhp=110c7a468)
4 ETW000 31 0.038901
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 12705
4 ETW000 2872 0.041773
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=1,svrhp=110c70138)
4 ETW000 26 0.041799
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=110c6ff18,srvhp=110c70138)
4 ETW000 14 0.041813
4 ETW000 [dev trc ,00000] Deallocating server context handle 110c70138 142 0.041955
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12705'
4 ETW000 21 0.041976
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 12705 22 0.041998
4 ETW000 [dev trc ,00000] Try to connect with default password 29 0.042027
4 ETW000 [dev trc ,00000] Connecting as SAPPSM/<pwd>@PSM on connection 0 (nls_hdl 0) ... (dbsl 640 250407)
4 ETW000 15 0.042042
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 15 0.042057
4 ETW000 [dev trc ,00000] 0 US7ASCII 1 110c66e00 110c6e8e0 110c6e198
4 ETW000 15 0.042072
4 ETW000 [dev trc ,00000] Allocating server context handle 9 0.042081
4 ETW000 [dev trc ,00000] Attaching to DB Server PSM (con_hdl=0,svchp=110c6ff18,srvhp=110c70138)
4 ETW000 22 0.042103
4 ETW000 [dev trc ,00000] Assigning server context 110c70138 to service context 110c6ff18
4 ETW000 31175 0.073278
4 ETW000 [dev trc ,00000] Assigning username to user session 110c7a468 11 0.073289
4 ETW000 [dev trc ,00000] Assigning password to user session 110c7a468 10 0.073299
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=110c6ff18,srvhp=110c70138,usrhp=110c7a468)
4 ETW000 15 0.073314
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 12705
4 ETW000 3514 0.076828
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=1,svrhp=110c70138)
4 ETW000 14 0.076842
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=110c6ff18,srvhp=110c70138)
4 ETW000 24 0.076866
4 ETW000 [dev trc ,00000] Deallocating server context handle 110c70138 95 0.076961
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12705'
4 ETW000 19 0.076980
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 12705 8 0.076988
4 ETW000 [dblink ,00428] ***LOG BY2=>sql error 12705 performing CON [dblink#3 @ 428]
4 ETW000 31 0.077019
4 ETW000 [dblink ,00428] ***LOG BY0=>ORA-12705: Cannot access NLS data files or invalid environment specified [dblink#3 @ 428]
4 ETW000 14 0.077033
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'PSM'"
invironment settting for <sid>adm
RISRCOM5701:psmadm 1> env
TERM=ansi
AUTHSTATE=files
SHELL=/bin/csh
HOME=/home/psmadm
USER=psmadm
PATH=/oracle/PSM/102_64/bin:/usr/java14_64/bin:/home/psmadm:/usr/sap/PSM/SYS/exe/runU:/usr/
sap/PSM/SYS/exe/run:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home/psmadm/bin:/usr/bin/X11:/sbin:.
TZ=IST-5:30
LANG=en_US
JAVA_HOME=/usr/java14_64
LOCPATH=/usr/lib/nls/loc
LC__FASTMSG=true
ODMDIR=/etc/objrepos
LOGNAME=psmadm
LOGIN=psmadm
SAPSYSTEMNAME=PSM
DIR_LIBRARY=/usr/sap/PSM/SYS/exe/run
IBM_JAVA_OPTIONS=-Xmx256M
THREAD=NOPS
dbms_type=ORA
dbs_ora_tnsname=PSM
dbs_ora_schema=SAPPSM
ORACLE_PSRV=PSM
ORACLE_SID=PSM
DB_SID=PSM
ORACLE_HOME=/oracle/PSM/102_64
ORACLE_BASE=/oracle
ORA_NLS10=/oracle/PSM/102_64/nls/data
NLS_LANG=AMERICAN_AMERICA.WE8DEC
SAPDATA_HOME=/oracle/PSM
MAIL=/var/spool/mail/psmadm
MAILMSG=[YOU HAVE NEW MAIL]
NLSPATH=/usr/lib/nls/msg/%L/%N:/usr/lib/nls/msg/%L/%N.cat
LIBPATH=/sapmnt/PSM/exe:/usr/sap/ipc/bin:/usr/sap/PSM/SYS/exe/run:/usr/sap/PSM/SYS/exe/runU
RISRCOM5701:psmadm 2>
Similar Messages
-
SAP cannot start Oracle after Upgrading to 10g
I have upgraded Oracle to 10g (10.2). After upgrading I run startsap but sapstart can start Oracle database but R3trans cannot verify that the database is started.
the following log are in startdb.log. Please give me an idea what to do to solve this problem.
S27adm 22> more startdb.log
Mon Jun 2 13:00:22 GMT: 2008
LOGFILE FOR STARTING ORACLE
Mon Jun 2 13:00:22 GMT: 2008
checking required environment variables
ORACLE_HOME is >/oracle/S27/102_64<
ORACLE_SID is >S27<
Mon Jun 2 13:00:22 GMT: 2008
check initora
Mon Jun 2 13:00:22 GMT: 2008
check initora
Mon Jun 2 13:00:22 GMT: 2008
checking V2 connect
TNS Ping Utility for HPUX: Version 10.2.0.2.0 - Production on 02-JUN-2008 13:00:22
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/oracle/S27/102_64/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (COMMUNITY = SAP.WORLD)(PROTOCOL = TCP)(HOST = er3asu81)(PORT = 1553)) (CONNECT_DATA = (SERVER = DEDICATED) (
SERVICE_NAME = S27.world)))
OK (0 msec)
tnsping: V2 connect to S27
Mon Jun 2 13:00:22 GMT: 2008
Connect to the database to check the database state:
R3trans: connect check finished with return code: 12
Database not available
Mon Jun 2 13:00:22 GMT: 2008
Shutdown database
First trying to shutdown the database - May be,
the database is in the nomount or mount state
Mon Jun 2 13:00:22 GMT: 2008
starting database
SQL*Plus: Release 10.2.0.2.0 - Production on Mon Jun 2 13:00:23 2008
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 2533359616 bytes
Fixed Size 2199816 bytes
Variable Size 2025713400 bytes
Database Buffers 503316480 bytes
Redo Buffers 2129920 bytes
Database mounted.
SP2-0158: unknown SET option "charwidth"
no rows selected
Not a terminal
Not a terminal
Database altered.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning and Data Mining options
Mon Jun 2 13:00:46 GMT: 2008
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
Notify Database Administrator.
Mon Jun 2 13:00:46 GMT: 2008
/usr/sap/S27/SYS/exe/run/startdb: Terminating with error code 2Verify .dbenv* files in your <sid>adm home directory and update them as recommended in 10g upgrade documentation in the SAP Marketplace.
If still not resolved, do R3trans -d from <sid>adm home directory and post the recent trans.log file to review further.
Good Luck
Nag Anthati -
Oracle Database upgrade from 10g R2 to 11g R2
Dear Oracle Experts,
Currently we I have three database on Oracle 10g(10.2.0.5) in same oracle home and want to upgrade only one database out of three.
Can you please advise if I can upgrade only one database instance(out of three database, same oracle home) and my two other database will run on 10g ? and can you please share steps also for the same
Best Regards
FarookhHi,
As Harry pointed out already, it's definitely possible and a good idea actually. By installing a new Oracle home you can easily revert back to the 10g one if you need to. It keeps everything separate and makes it cleaner.
I would recommend reading the Oracle docs. DK2010 has written them down here:
upgrade the database version 10.2.0.1.0
I made some notes on how to upgrade your database from 10g to 11g over on my site, they are the exact steps I used. It might help you to have a read through them but you should definitely read the Oracle docs and make sure everything you need for your environment is covered before upgrading. [url http://www.ora00600.com/wordpress/articles/oracle-10g-to-11g-upgrade-guide/]Here are my notes.
Hope that helps,
Rob -
Oracle 9i Upgrade to 10g - Single Database instances to RAC
Hi,
We are considering migrating from single SAP database architecture into
an Oracle 10g RAC architecture. The question i have is:
Are multiple PHYSICAL databases supported in one Oracle 10g RAC environment? For example, Is it possible to install and operate multiple databases in one single ORACLE 10g Real Application Cluster such as one SAP R/3 database, one SAP EBP and one
SAP BW database co-exist in a single Oracle RAC environment?
Regards,
Chengappa BallachandaHi Sairam,
Due to the size of our Production environments we have decided not to pursue the MCOD option.
Eg: Take a QA environment which consists of SRM and BW and we have multiple nodes with both installed on each node. Now if I were to go the MCOD option then these instances can connect to one large Oracle File System using different schema's.
What I'm trying to establish is in that one RAC, is it possible to have the multiple database instances on each node (SRM, BW etc) connect to multiple Oracle File Systems ie SRM connect to its own OFS and BW to its own instead of the one large shared OFS?
Hope this makes sense! Easier if I could upload a diagram!
Regards,
Chengappa -
Oracle Upgrade from 10g to 11g [BRANCHED BY MODERATOR]
Hi Deepak/Folks,
Another question that I have is that while doing the Oracle Upgrade on an EP server, the patches were not installed properly and I had to shut down the Patches installation after it did not do anything for a while.
Now when I try to install the patches it fails telling me that the Installed patches cannot be verified, I had written to SAP and they told me to follow the
SAP note 1862446 - Inventory
load failed... OPatch cannot load inventory for the given Oracle Home
and re-create the oracle inventory.
This has also not helped in anyway.
Is there a solution to this problem.
Following is the error that I am getting when I try to Install the patches
Getting pre-run patch inventory...
Getting pre-run patch inventory...failed.
Cannot get pre-run patch inventory.
Refer to log file
$ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_08_06-14-52-51.log
when I open the log file specified here I get the following
more mopatch-2014_08_06-14-52-51.log
more /oracle/<SID>/11203/cfgtoollogs/mopatch/mopatch-2014_08_06-15-01-51.log
MOPatch - Install Multiple Oracle Patches in One Run - 2.1.15.
Copyright (c) 2007, 2013, Oracle and/or its affiliates. All rights reserved.
Version: 2.1.15
Revision: 5.1.2.26
Command-line: /oracle/<SID>/11203/MOPatch/mopatch.sh -v -s SAP11203P_1312-20009978.zip
Oracle Home: /oracle/<SID>/11203
RDBMS version: 11.2.0.3.0
OPatch version:11.2.0.3.3
Clean-up: supported
PSUs: supported
Log file: $ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_08_06-15-01-51.log
Patch base: .
Patch source: SAP11203P_1312-20009978.zip
Link script: ./link.mts<SID>ua.sh
Readmes: <none>
Strpd. Readmes:<none>
make utility: /usr/ccs/bin/make
unzip utility: /oracle/<SID>/11203/bin/unzip
User name: ora<SID>
Working dir: /oracle/stage
System: HP-UX mts<SID>ua B.11.31 U ia64 2468369872 unlimited-user license
Disk free: 11734549 KBytes on /oracle/<SID>
Disk required: 886496 KBytes on /oracle/<SID>
Getting pre-run patch inventory...
executing: "/oracle/<SID>/11203/OPatch/opatch" lsinventory -retry 0 -xml "./mopatch-187-21696-tmpdir/preinv.xml"
========================================================
GENERIC OPATCH VERSION - FOR USE IN SAP ENVIRONMENT ONLY
========================================================
Oracle Interim Patch Installer version 11.2.0.3.3
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home : /oracle/<SID>/11203
Central Inventory : /oracle/<SID>/oraInventory
from : /oracle/<SID>/11203/oraInst.loc
OPatch version : 11.2.0.3.3
OUI version : 11.2.0.3.0
Log file location : /oracle/<SID>/11203/cfgtoollogs/opatch/opatch2014-08-06_15-01-56PM_1.log
List of Homes on this system:
Inventory load failed... OPatch cannot load inventory for the given Oracle Home.
Possible causes are:
Oracle Home dir. path does not exist in Central Inventory
Oracle Home is a symbolic link
Oracle Home inventory is corrupted
LsInventorySession failed: OracleHomeInventory gets null oracleHomeInfo
OPatch failed with error code 73
Getting pre-run patch inventory...failed.
Cannot get pre-run patch inventory. Exiting.
I would appreciate if you folks can help me out on this
Thanks
APSFOLLOW UP QUESTION BRANCHED:
Oracle Upgrade from 10g to 11g [BRANCHED BY MODERATOR] -
Ihi Guys
I am in the process of Oracle database upgrade.
Oracle 9i to Oracle 10g(10.2.0.4)
SAP: 4.70, Windows 2000
DB have been installed and now need to apply the patch to level 4(10.2.0.4).
In the Oracle documentaion for Oracle Patches, i can see sectioon 7.1 and section 7.2 talks about .
7.1 Review Known Preinstallation Issues
Review the information in the following sections. If any of the issues apply to the Oracle installation, follow the instructions before installing the patch set.
Upgrading Oracle E-Business Suite Databases
Upgrading Installations that use Physical or Logical Standby Databases
Upgrading Installations that use Java Virtual Machine or Oracle interMedia
Upgrading Oracle Clusterware
Notes to Oracle OLAP Users
Disabling Oracle Database Vault
7.2 Identify the Oracle Database Installation
This is not a complete software distribution. You must install it in an existing Oracle Database 10g Oracle home. To identify Oracle home directories, view the/etc/oratab file.Use Oracle Universal Installer to identify Oracle home directories. From the Welcome screen, click Installed Products, then click the Environment tab. You should then cross-check this by executing
opatch lsinventory -all
Do we have to perform these activities as well, or we can ignore these steps and continue with next steps onward?
RegardsHello Ricky,
> Upgrading Oracle E-Business Suite Databases
Not needed.
> Upgrading Installations that use Physical or Logical Standby Databases
Only needed if you have a standby database for your productive database. Standby databases can be maintained/created with Oracle Data Guard or manually.
> Upgrading Installations that use Java Virtual Machine or Oracle interMedia
Not used in a standard SAP environment
> Upgrading Oracle Clusterware
Only needed if you use Oracle RAC
> Notes to Oracle OLAP Users
You have an OLTP.. not an OLAP
> Disabling Oracle Database Vault
Not used in a standard SAP environment (pilot phase)
> 7.2 Identify the Oracle Database Installation
You should perform these step and check it.
Regards
Stefan -
Needed Document for upgrading Oracle forms and reports 10g to 11g
Hi Guys,
Currently my client is using Oracle 10g for forms and reports and currently he is looking to upgrade from 10g to 11g.
Can some one provide me the impact analysis document which shows if they is any risk factors involved if we migrate from 10g to 11g.
If any risk factors are involved what steps needs to be taken care before we upgrade from 10g to 11g.
Guys please respond me ASAP.
Regards,
Venkat.@Guys can you respond on my post?and help me to come out of that issue.
-
Upgrade oracle 9.206 to 10G R2
Hi Friends,
Does friend have experience to upgrade oracle 9.2.0.6 to 10G in window 2003 32 bit system?
Could we exp 9.2.0.6 database and imp inot blank oracle 10G database?
Thanks,
JImJim,
If you have access to the metalink you can refer to this doc id for your exact existing version to upgrade 10g version
Doc ID: 730365.1 Oracle Database Upgrade Path Reference List. This will have detailes stepwise instructiions to upgrade from 9i to 10g (any patch number) and more.
Yes you can import 9i export dump into 10g.
Regards -
Upgrading Oracle 7.3 to 10g
Hello All,
We are planning to upgrade Oracle 7.3 to 10 g.
Is any one know what is hardware requirements for 10g on Sun Solaris or other UNIX System?
What we have Currently is as follows:
Operating System, SUN Solaris 5.5.1
For Production:
SUN Microsystems E450
2 X UltraSPARC-II 400MHz
1GB RAM
12 X 4.2GB hard-drives
Stagging
SUN Microsystems ULTRA2
UltraSPARC 200MHz
128MB RAM
3 X 9.0GB hard-drives
any feed back will be appreciated.
DThe referenced document refers to two methods of accomplishing the upgrade. One is to use the upgrade utility and the other is to manually execute the upgrade scripts. There is, however, a third way that is much easier and that gives you immediate access to all of the new features of the 10g database.
Both of the methods described in the document, which you should read no matter what you do, perform all of the upgrade changes to the existing database. This is why you cannot go directly from 7.3.4 to 10g. The scripts that are behind the process just will not run successfully in a 7.3.4 database. As a result, you would have to upgrade to 8.0.6 and then to 10g. This is the "supported" path, but you do not have to follow this path to achieve a successful upgrade.
The third upgrade scenario is to create a new 10g database using scripts that you have written that utilize all of the various new features that you would like to use such as locally managed tablespaces and undo management. Once this has been created and tuned up a bit, you would perform an export/import to get your application's code and data from the old database to the new.
In our enterprise, we have over 450 databases, and we just could not afford to take the time to follow the "supported" path. It would have taken too long, and we had only a few days to convert 272 of these with more time for the rest. As a result, we built our own create scripts for the new databases, ran those in advance of our worldwide deployment date, and then we used the export and import tools to move our application code and data. This was a lot easier than the "official" method, and it works.
The advantage to this approach is that it is straightforward and does not involve Oracle's upgrade tools which many have had problems using. The disadvantage is that you really have to know what you are doing. If you are not an experienced DBA, you may not have the wherewithal to successfully execute this method.
Kind regards,
Russ Cannon -
Hello all,
Whether i need to check the BI system before going for Oracle upgrade to 10g. As we have taken sys copy from BIP to BI test server. Now we are planning to upgrade oracle 9i to 10 g. Please suggest.
amitAs part of a project implementation you shoudl have test scripts developed by your implementation team
They are not generic and shoudl be in your documentation handed over.
I cant give you a link because they are sitting on my server and apply to my project
If you havent got any test scripts then you will have to generate them from scratch - and these can be used for all other upgrades - and yes they cost a fortune in man hours to write
Examples are:
Listcube
Open Hub
SPRO tables
Multiprovider checks
Aggregate update
Process Chains
Transport Checks
Foreign Character check
Role Access
Creating queries
Creating variants
Superuser checks
Variable checks
RSRV checks
Run under Citrix
SQL checks
etc
Edited by: Simon Turnbull on Dec 30, 2008 1:25 PM -
Oracle Database Upgradation 10g to 11g in HP unix
Oracle Database Upgradation 10g to 11g (standalone DB & ASM is implemented) in HP unix ?
Kindly furnish the good links and screen shot documents.
Edited by: user11937849 on Apr 9, 2012 4:04 AMAs part of the upgrade, you might research how new Oracle 11g features can help your system run better.
Your upgraded system can effectively start using extended statistics, a very powerful new 11g feature, immediately after the upgrade. I have a detailed blog post on how to do this with OEM - http://iiotzov.wordpress.com/2011/11/01/get-the-max-of-oracle-11gr2-right-from-the-start-create-relevant-extended-statistics-as-a-part-of-the-upgrade
Iordan Iotzov
http://iiotzov.wordpress.com/ -
Images after upgrade from 10g to 11g
We recently upgraded from 10g to 11g and all the images are broke in the dashboard.
Can anyone provide the steps needs to be done in order to fix the broken images?
Thanks.Put image files at
Drive:\Oracle\Middleware\Oracle_BI1\bifoundation\web\app\res\s_blafp\images
Drive:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers\bi_server1\tmp\_WL_user\analytics_11.1.1\7dezjl\war\res\s_blafp\images
If required
Drive:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers\AdminServer\tmp\.appmergegen_1291264099332\analytics.ear\ukjjdc\res\s_blafp\images
Call them using fmap
Syntax: fmap:images/imagename.imageformat
for e.g: fmap:images/geograph.jpg
Pls mark correct/helpful if helps -
After Upgrade OBI 10g to 11g:Odbc driver returned an error - SQLExecDirectW
Hi all,
for an OBI upgrade from 10g to 11g I used a RPD and Webcatalog based on a remote machine other than my local machine. Firstable I am making the tests on a Linux Virtual machine, which uses the Sample Lite version from Oracle.
I made the following steps:
1. I upgraded the RPD and Webcatalog. It worked without any errors.
2. I set the static variable BI_EE_HOME via Administration Tool to the path in the Linux machine.
--> Here I am not sure if the set path is correct. It begins with: \bi\ ...\instances\...\coreapplication_obis1 (... : I can't mention here the whole path name).
--> When the OBI Server is installed in Windows, the mentioned static variable points to something like 'C:\<install folder>\...\coreapplication_obis1'
--> Question: is the begin of my set path correct?. I set that pointing to the Linux OBI Server, because the OBI Server is installed on Linux.
Problem:
After login as the user in RPD: Administrator/<Password for my upgraded RPD> I can see the links in the Catalog and the Dashboards links. But I can not see any values, any Reports when going through the links.
For example when trying to see a Dashboard with date 12.02.2011it happens:
Odbc driver returned an error (SQLExecDirectW).
Status: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] general error.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 43119] Query Failed:
[nQSError: 17001] Oracle Error code: 12154, message: ORA-12154: TNS:could not resolve the connect identifier specified
at OCI call OCIServerAttach.
[nQSError: 17014] Could not connect to Oracle database. (HY000)
SQL Issued: SELECT "Dimension_-_My Dimension"."MyDimension" saw_0 FROM "Accounting (ACC)" WHERE "Dimension_-_My Dimension"."MyDimension" LIKE 'J%' ORDER BY saw_0
I think its not retrieving the data from the remote database, because I don't have the data of the remote database in my local. I think the OBI Server still is pointing to the local virtual machine Oracle database.
Can anybody tell me what happens here and how can I solve this problem?.
I would appreciate any help....Hi gerardnico,
I've tried many things and did as in your articles, but I don't have success with that.
These are the things I did:
1. I searched for the file tnsnames.ora in my Linux virtual machine. I could find it in many paths:
/.../Oracle_BI1/network/admin/samples/tnsnames.ora
/.../oracle/xe/app/oracle/product/10.2.0/server/hs/admin/tnsnames.ora.sample
/.../oracle/xe/app/oracle/product/10.2.0/server/network/admin/tnsnames.ora
/.../oracle/xe/app/oracle/product/10.2.0/server/network/admin/samples/tnsnames.ora
/.../oracle/xe/app/oracle/product/10.2.0/server/network/admin/temp/tnsnames.ora
/.../usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin
in the last path I found the listener.ora as well.
2. I took the tnsnames.ora from the last path, because the ORACLE_HOME points to /.../usr/lib/oracle/xe/app/oracle/product/10.2.0/server
3. I edited the tnsnames.ora this way:
# tnsnames.ora Network Configuration File:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host_of_the_remote_machine)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = database_name_of_the_remote_machine)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = database_SID_of_the_remote_machine)
(PRESENTATION = RO)
4. I made a backup of the tnsnames.ora in path /.../Oracle_BI1/network/admin/samples/tnsnames.ora
and copied the tnsnames.ora from /.../usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin to the Oracle_BI1 path
5. I set the TNS_ADMIN to /.../usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin
6. I restarted the BI Server
No success in what I did. The error is still there.
7. I've tried also: sqlplus database_user_remote_machine/database_password_remote_machine@database_SID_remote_machine
I didn't get the connection:
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Jun 16 04:36:10 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
Enter user-name: database_user_remote_machine
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
What am I doing wrong here?. I am still thinking that I need the import of the database.
Additional SID=Service-Name=Database-name in the remote machine. -
Requirement to upgrade OBIEE 10g on Windows to OBIEE 11g on Linux
Dear All,
I have a requirement to upgrade OBIEE 10g from current windows 2003 environment to OBIEE 11g Linux environment.
I went through forums and many threads on upgrade, everywhere they talk about Upgrade Assistant (UA). And oracle documentation says ,
+"Do not change from one platform or architecture to a different platform or architecture as part of the upgrade process.+
+For example, if the existing 10g system is running on a Windows 32-bit platform, do not install Oracle BI 11g on a Linux 64-bit platform and then run the Linux 64-bit Upgrade Assistant to upgrade the existing 10g system."+
But there would certainly be scenarios with other users the way I have. Then what is the way out to do this upgrade?
Can anyone give some advice on this. It is little urgent.
Thanking in advance.
Regards,
Deepika.Thats are huge change in platform. win32 to linux 64.
Yet what we upgrade is only
catalog and rpd.
this might involve some manual change if UA cannot complete successfully.
Its better to do a prototype before the actual upgrade as recommended by Oracle. This will show what can the possible issues and road blocks.
Edited by: user10615659 on May 23, 2013 11:22 AM
Edited by: user10615659 on May 23, 2013 12:26 PM -
Problem with Java Application after upgrade to 10g
after upgrading to 10g if I enable coloumn of varchar255 to load into memory of my middleware orm following error is thrown,
javax.servlet.jsp.JspException at jsp.viewsinglerecord.throwError(_viewsinglerecord.java:31) [SRC:/jsp/standardinclude.jsp:84] at jsp.viewsinglerecord._jspService(_viewsinglerecord.java:1185) [SRC:/jsp/displaymultiplerecords.jsp:461] at com.orionserver[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:356) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:498) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:402) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:835) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:230) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.GetParametersRequestDispatcher.forward(GetParametersRequestDispatcher.java:257) at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069) at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455) at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279) at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482) at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:835) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:816) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:231) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:136) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192) at java.lang.Thread.run(Thread.java:534)
Any lights on this issue ?after upgrading to 10g if I enable coloumn of varchar255 to load into memory of my middleware orm following error is thrown,
javax.servlet.jsp.JspException at jsp.viewsinglerecord.throwError(_viewsinglerecord.java:31) [SRC:/jsp/standardinclude.jsp:84] at jsp.viewsinglerecord._jspService(_viewsinglerecord.java:1185) [SRC:/jsp/displaymultiplerecords.jsp:461] at com.orionserver[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:356) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:498) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:402) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:835) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:230) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.GetParametersRequestDispatcher.forward(GetParametersRequestDispatcher.java:257) at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069) at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455) at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279) at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482) at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:835) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:816) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:231) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:136) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192) at java.lang.Thread.run(Thread.java:534)
Any lights on this issue ?
Maybe you are looking for
-
Hi I recelntly re-installed Arch on my Dell 1525 laptop. Earlier the built in SD card reader worked. Im not sure if I explictly need to install a driver for this. output of uname -a 2.6.36-ARCH output of lspci 02:09.0 FireWire (IEEE 1394): Ricoh Co
-
How to get the area of a polygon
Dears, I want to use distance tool to get the area of a drawn polygon, how to do so using mapviewer javascript API version 2 and/or version 1. Does the mapviewer javascript API version 2 works with JSP/ASP or it is just for HTML5? Many thanks in adva
-
Differences in the message id between IMAPMessage and MimeMessage
Hi, When I'm getting IMAPMessage from the IMAP server and calling getMessageID() I got next id (for the privacy reasons it not real, but reproduce the differences) : <[email protected]> Then, when I saved this message to the disk and read it as MimeM
-
I have downloaded firefox and downloaded adobe flashplayer and done everything that I know of. I am NOT very computer literate. It actually worked on two occasions after I first installed Firefox and then again after I restarted it. But never since.
-
Scroll direction not working in either direction
I'm running Mountain Lion. The scroll direction works under account A, but if I switch users B, it stops working all together under B account. I've been to System Prefs and see nothing unusual. It's system wide, can't scroll in the finder or in appli