Oracle 9i without any X?

Hello!
Can i install Oracle 9i without any X on my Redhat System?
When yes, how?

Impossible!!!
Interactive mode and silent mode only can support X.

Similar Messages

Third Party Application Integration with Oracle EBS Without any middleware

Hi,
Please give suggestions about the Third Party Application Integration with Oracle EBS
Without any middleware. Can we achieve this?
Thank you,
Muhammad Nasir
Edited by: User129 on Feb 4, 2013 3:45 AM

Muhammad,
You may get better response in Oracle EBS forum -
General EBS Discussion
Regards,
Anuj

When oracle invalidates result_cache results without any changes in objects

Hi all!
On our production servers we have simple function with result_cache, like this:
create or replace function f_rc(p_id number) return number result_cache
is
ret number;
begin
select t.val into ret from rc_table t where t.id=p_id;
return ret;
exception
when no_data_found then
return null;
end;
/And its results frequently invalidates without any changes in table or
function. I found only 2 cases when oracle invalidates result_cache
results without any changes in table:
1. "select for update" from this table with commit;
2. deletion of unrelated rows from parent table if there is unindexed
foreign key with "on delete cascade".
I test it on 11.2.0.1, 11.2.0.3, on solaris x64 and windows. Test
cases: http://www.xt-r.com/2012/07/when-oracle-invalidates-resultcache.html
But none of them can be the cause of our situation: we have no
unindexed fk, and even if i lock all rows with "select for update", it
still does not stop invalidating.
In what other cases this happens? Am I right that the oracle does not
track any changes, but the captures of the locks and "commits"?
Best regards,
Sayan Malakshinov
http://xt-r.com

Hmm.. Do you about our situation or about test cases with "select for update" and "fk" too?
I'm not sure that it is a bug, maybe it's an architectural approach to simplify and reduce the cpu load?
Best regards,
Sayan Malakshinov
http://xt-r.com

Oracle XE 10g install fails without any error or message

Hi,
I searched many posts in this form, and could not find an answer to my problem.
Trying to install XE on a server 2003. Installation proceeds successfully almost to an end, and then installation window disappears, without any message, error or warning.
New ORACLE_HOME, created up to this point, also disappears.
Logfile has the following entries, C:\WINDOWS\OracleDatabaseXEServerInstall.log:
MSI (s) (F8:C0) [16:04:44:540]: Note: 1: 1708
MSI (s) (F8:C0) [16:04:44:540]: Product: Oracle Database 10g Express Edition -- Installation operation failed.
I know that the server is behind the firewall, and does not have connection to the internet. It is connected to the network, and other servers and desktops, though.
Does it have to have access to the outside world to install XE?

Hi,
I am having the same issue, both on a windows 2003 server and on a XP client PC. The installation progresses up to a point after which the installation window disappears without errors or messages. I tried as a domain administrator, as a local administrator and removed other Oracle software, rebooted, checked for virus scanners etcetera, withou result.
I searched through the forums but could not find a solution.
Any idea's?
Regards,
Gerrit
Hi,
I searched many posts in this form, and could not
find an answer to my problem.
Trying to install XE on a server 2003. Installation
proceeds successfully almost to an end, and then
installation window disappears, without any message,
error or warning.
New ORACLE_HOME, created up to this point, also
disappears.
Logfile has the following entries,
C:\WINDOWS\OracleDatabaseXEServerInstall.log:
MSI (s) (F8:C0) [16:04:44:540]: Note: 1: 1708
MSI (s) (F8:C0) [16:04:44:540]: Product: Oracle
Database 10g Express Edition -- Installation
operation failed.
I know that the server is behind the firewall, and
does not have connection to the internet. It is
connected to the network, and other servers and
desktops, though.
Does it have to have access to the outside world to
install XE?

Payables Open Interface Pgm fails without any error(Very urgent)

All,
I'm into an integration project where in I'm pushing Invoice doc from a third party appln to Oracle apps (11.5.10.2) thru payables open interface. The integration is smooth till today. We pushed a record today, but the concurrent neither picks up the data but failed with 'completed error' status. When I delete the same record from the interface, the concurrent runs fine. So we are sure there is some issue with the data in my record. Since concurrent is failed without any reason, from where I can get the log to know what is the actual problem with that record? Pls help me with your inputs.
Thanks,
Sen

Sen,
To enable trace, please refer to this document (skip the part about generating TKPROF, just check the concurrent request output file if more details about the error are logged after enabling trace and setting the profile option).
Note: 453527.1 - How To Trace a Concurrent Request And Generate TKPROF File
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=453527.1
The database log file can be usually found under $ORACLE_HOME/admin/<SID>_<hostname>/bdump directory (or from SQL*Plus, issue "show parameter background_dump_dest").
Regards,
Hussein

Including jar file to Oracle-Java without unpacked

Hi All,
I am writting JAVA classes in Oracle, but I don't know how to include a jar to the Oracle.
I had tried to use loadjava, and the classes inside the jar were unpacked and included successfully.
However, I am doing some cryto things associated with RSA, and if the jar is unpacked, the signature will be broken and I can't use it anymore.
Is there any way to include a jar file to the Oracle system without unpacking it?
In details, I want to include a jar file which contains the signatures and information of the provider "BC" (org.bouncycastle.jce.provider.BouncyCastleProvider) to my code. It works perfectly on Java alone. In Oracle, the compilation error is "cannot resolve symbol "import org.bouncycastle.jce.provider.BouncyCastleProvider".
I am using Oracle 10g Enterprise Release 2.
Please give advices. Thank you in advance.

From the documentaton:
"When you pass a JAR or ZIP file to loadjava, it opens the archive and loads the members of the archive individually. There is no JAR or ZIP schema object."
This matters because "Unlike a conventional JVM, which compiles and loads from files, the Oracle JVM compiles and loads from database schema objects."
Sorry.
Do you really need to load the jar? BounceyCastle does offer all the sources for all its stuff. I know it's a lot of pfaffing about but you could just download the SRC zips and the then loadjava each .java file you need. Should be too hard to automate that process.
Cheers, APC

How to resolve of corruption of undotbs without any backup and DB in Noarch

Hi Guys,
On one of my database having block corruption error, as no backup is availabe and its in noarchive mode. Previously It might be in "archvie mode"
but when access comes to me it was in no archvie mode.
database is down, when I run "startup" cmd on sqlprompt it give error as below:
ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forced
and when check with alert.log file it gives as below error: corrupton of undotbs.
ORA-01578: ORACLE data block corrupted (file # 2, block # 9)
ORA-01110: data file 2: 'D:\ORACLE\TEST1\UNDOTBS01.DBF'
---I also try with below steps:
1) first take coldbackup
2) create pfile from spfile and change parameters :
undo_management to manual
comment out undo_tablespace and undo_retention
3) add one parameter as below:
allowresetlogs_corruption=true
4) add one more parameter :
corruptedrollback_segment=(_SYSSMU1$,_SYSSMU2$,_SYSSMU3$,_SYSSMU4$,_SYSSMU5$)
3) mount with pfile
4) recover database until cancel
cancel
5) alter database open resetlogs;
but the same error :(
any suggestion...

jigisha wrote:
database is in mount mode ...not able to open
and dont have any backup as well.Its a serious mistake to run the db in noarch and that too without any backup. Do NOT use those underscore parameters without OSS coming and asking you to do so. You have already fingers burnt of yours, don't make the complete hand getting burnt by using these parameters without consent of OSS. Raise an SR to oracle and do what they say.
HTH
Aman....

Extract abends after sometime without any errors in logs

Hi Folks,
I am implementing unidirectional simple replication for one schema (DDL & DML) without GG data pump and I am newer to GG.
Extract abends after sometime without any errors in logs. I doubt I did not configure exttrail/rmttrail properly.
What should be the commands to configure trails in this scenerio ?
Any suggestions ?
Regards
Edited by: LazyDBA11g on Aug 22, 2012 1:00 AM

Thanks Paddu for reply but I can not use DBLOGREADER as it is not compatible in my env
Use the TRANLOGOPTIONS parameter with the DBLOGREADER option in the Extract parameter file if the ASM instance is one of the following versions:
Oracle 10.2.0.5 or later 10g R2 versions
Oracle 11.2.0.2 or later 11g R2 versionsLastly I dont have connectivity issue with ASM.
Regards
Edited by: LazyDBA11g on Aug 22, 2012 1:03 AM

How is it possible to draw a graph using without any label along the x-axis

Hi,
I created a bar-graph using the tabular data below:
public List getTabularData() {
List list = new ArrayList();
String[] rowLabels = {"Allocation","Forecast", "Bookings", "Loaded"};
for (int r = 0 ;r<rowLabels.length ;r++ ) {
if ( r == 0) {
list.add(new Object[]{"Alloc/Forecast",rowLabels[r],new Double(_allocation)});
if ( r == 1) {
list.add(new Object[]{"Alloc/Forecast",rowLabels[r],new Double(_forecast)});
if ( r == 2) {
list.add(new Object[]{"Booking/Loaded",rowLabels[r],new Double(_bkg)});
if ( r == 3) {
list.add(new Object[]{"Booking/Loaded",rowLabels[r],new Double(_loaded)});
return list;
This is creating a two groups "Alloc/Forecast" and "Booking/Loaded". Group labels are shown in the x-axis.
But I don't want to show the labels. Instead, only the graph with two groups without any labels in x-axis. How is it possible ?

User,
I haven't tested this at all - you may want to have a look at the [url http://download.oracle.com/docs/cd/E12839_01/apirefs.1111/e12418/tagdoc/dvt_o1TickLabel.html]dvt:o1TickLabel component to see if it can suppress the labels.
John

Concurrent Program ends in Error without any error message - Apps 11.0.3

Hi,
We have a concurrent program which errors out sometimes without any error message in log file or anywhere else. This happens intermittently. Is there anyway to see why this happens ( to see error message somewhere else - like FND tables ?). Any feedback is appreciated. This happens in Oracle Apps 11.0.3.
thanks
Ram

Ram,
Is this a custom or standard concurrent program?
Was this working properly before? If yes, what changes have been done recently?
Did you try to relink the concurrent program executable file and see if this helps? Also, you could enable trace/debug and submit the request again and see if more details are collected in the logs -- See (Note: 296559.1 - FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12).
Regards,
Hussein

OBIEE 11.1.1.6 installation hangs without any error or warning

Hi all,
I'm trying to install OBIEE 11.1.1.6 on a previous 11.1.1.5 installation, on Windows Server 2003 Enterprise Edition. I followed the instructions on the "Oracle® Fusion Middleware Upgrade Guide for Oracle Business Intelligence 11g Release 1 (11.1.1)" manual, "Moving from 11.1.1.3 or 11.1.1.5 to 11.1.1.6" paragraph.
All checks give positive result but then installation hangs without any error or warning. I tried 3 times with the same behaviour.
Any suggestion? Anyone having similar problems?
Thanks in advance,
Cristina

The only error I get (in the Windows application event viewer) is:
[nQSError: 12002] Socket communication error at call=recv: (Number=10054) An existing connection was forcibly closed by the remote host
Any suggestion?
Thanks,
Cristina

Secure drop Tablespace without any dictionary reference

Hi all,
I need some help to drop tablespaces without any object reference to them or without any segment into them.
I wrote below select statement to obtain those tablespaces:
select tablespace_name, sum(cnt) cnt from
select tablespace_name, count(0) cnt from dba_tables group by tablespace_name
union all
select tablespace_name, count(0) cnt from dba_indexes group by tablespace_name
union all
select tablespace_name, count(0) cnt from dba_tab_partitions group by tablespace_name
union all
select tablespace_name, count(0) cnt from dba_ind_partitions group by tablespace_name
union all
select tablespace_name, 0 cnt from dba_tablespaces
group by tablespace_name
order by cnt
/Can you give any advise if I am missing another type of segment?
Oracle Database 11g 11.2.0.1
Thanks in advance.
Juan M
Edited by: johnxjean on Aug 23, 2012 11:40 AM

johnxjean wrote:
Hi all,
I need some help to drop tablespaces without any object reference to them or without any segment into them.
I wrote below select statement to obtain those tablespaces:
select tablespace_name, sum(cnt) cnt from
select tablespace_name, count(0) cnt from dba_tables group by tablespace_name
union all
select tablespace_name, count(0) cnt from dba_indexes group by tablespace_name
union all
select tablespace_name, count(0) cnt from dba_tab_partitions group by tablespace_name
union all
select tablespace_name, count(0) cnt from dba_ind_partitions group by tablespace_name
union all
select tablespace_name, 0 cnt from dba_tablespaces
group by tablespace_name
order by cnt
/Can you give any advise if I am missing another type of segment?
Oracle Database 11g 11.2.0.1
Thanks in advance.
Juan M
Edited by: johnxjean on Aug 23, 2012 11:40 AMSELECT TABLESPACE_NAME FROM DBA_TABLEPACES
MINUS
SELECT TABLESPACE_NAME FROM DBA_SEGMENTS;
-- above produces list of tablespaces that contain no objects

SQL developer starts and then disappears without any warning

Hi, guys:
I need to use SQL developer where there are existing connections. however, SQL developer 3.1 asked the java.exe location, and I chose java 6, now I can launch SQL developer but not able to continue running it. SQL developer starts and then disappears without any warning. Could anyone help me on this problem?
Thanks a lot!
Sam

Can you start the exe from the BIN subdirectory? That should open a command console, and maybe you can see any error messages there that explain what's happening. For step-by-step directions, here's some help:
http://www.thatjeffsmith.com/archive/2012/06/how-to-collect-debug-info-for-oracle-sql-developer/
OR
Install SQL Developer to a new directory and run it from there and see if that helps you get around your current install's issue.

Transfer ABAP report to external database without any middleware

Dear All
We have a requirement wherein we have to transfer ABAP report to external database without any middle-ware,our database is DB6 and the target/external database is ORACLE,kindly let us know how to go about??
Thanks in Advance
Arun

Hi,
What do you mean by "transfer ABAP report to external database " ?
Regards,
Olivier

Implement Oracle Streams without having Primary Keys

In our environment, we can't create primary keys so anyone know how to implement oracle streams without having primary keys on the tables.
Thanks,

You can JOIN tables on any compatible columns or functions (like LEFT (PONumber,10) ):
http://technet.microsoft.com/en-us/library/ms191517(v=sql.105).aspx
BOL: "When the (ON) condition specifies columns, the columns do not have to have the same name or same data type; however, if the data types are not the same, they must be either compatible or types that SQL Server can implicitly convert. If the data types
cannot be implicitly converted, the condition must explicitly convert the data type by using the CONVERT function. "
LINK:
http://technet.microsoft.com/en-us/library/ms177634(v=sql.105).aspx
Typically tables are JOIN-ed on FK-s and PK-s.
Kalman Toth Database & OLAP Architect
SELECT Video Tutorials 4 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Oracle 9i without any X?

Similar Messages

Maybe you are looking for