Oracle 9iAS vs WebMethods Integration Platform

Anyone have a quick comparison of pluses/minuses for 9iAS versus WebMethods'Integration Platform? Would appreciate your help!
Thanks for a speedy reply.
Dave Kirkham

Bump

Similar Messages

Oracle.integration.platform.blocks.sdox.WLSSDODynamicStubHelper

Hi All,
I have developed an ADF-BC Service and created service interface in it. And trying to deploy in Admin server but getting the following error:
[01:44:28 PM] Weblogic Server Exception: weblogic.application.WrappedDeploymentException: oracle.integration.platform.blocks.sdox.WLSSDODynamicStubHelper
[01:44:28 PM] See server logs or server console for more details.
[01:44:28 PM] weblogic.application.WrappedDeploymentException: oracle.integration.platform.blocks.sdox.WLSSDODynamicStubHelper
Do we need SOA server for this to deploy or can deploy on Admin Server also? Please help me
Regards,
Ramesh.
Edited by: user10956358 on Jul 25, 2012 6:30 PM

I am using FusionOrderDemo_R1PS4 for FOD, but I am trying to build it on SOA_11.1.1.6.0_GENERIC_111217.1257. I know that there could be some mismatch, but I want to fix them.
Any way to fix this without using SOA earlier version?

RFI: Systems integrators with Oracle 9iAS integration expertise neede ASAP.

Where can we find resources and/or systems integrators to ramp up an ongoing Oracle 9iAS integration project in EMEA.
Please reply to [email protected]

Integration of Oracle 9iAS Email with Portal-URGENT!!!!

Hi all,
Is it possible to integrate Oracle 9iAS Email component with Oracle Portal so that we can do away with the need for installing Exchange Portlets?Can neone throw more light in this regard.
Regds.
Kiran.

9iAS comes with an Email Server, if that is what you are asking.
You could always write an IMAP portlet, which allows you to read/send mail.
Hi all,
Is it possible to integrate Oracle 9iAS Email component with Oracle Portal so that we can do away with the need for installing Exchange Portlets?Can neone throw more light in this regard.
Regds.
Kiran.

Integrating Forms 6i and Oracl 9iAS

Does anyone tell how to run a Forms 6i application over the web based on the Oracle 9iAS server?
Where can i find documentation to this?

You can do it using a familiar URL :
http://app_server_name:port#/dev60cgi/ifcgi60.exe?form=your_form.fmx
Izabella.

Oracle Portal and Discoverer Integration

Portal Version: 9.0.2.0.1
RDBMS Versjion: 9.0.1.3
OS/Vers. Where Portal is Installed:: Suse 7 SLES
Error Number(s)::
Oracle Portal and Discoverer Integration
We're trying to integrate Discoverer with Portal unsuccessfully.
We made many things in accordance with oracle's documentation until add discoverer portlets (worksheet and list of workbooks) in a test page.
In view mode, the worksheet portlet shows the error:
"The portlet has not been defined. The publisher must define the portlet by clicking on Edit Defaults for the portlet on the edit mode of this page. Please contact the publisher of this page."
We think we have to edit properties before. Is this? Anyway edit worksheet portlet crashes between step 1 and 2. The error is: "The listener returned the following Message: 500 Internal Server Error".
We have a public conection created in EM and a discoverer application which can be viewed using plus or viewer.
Furthermore, it's not possible delete the added portlets neither the page that contain it. The error at delete is:
Error: An unexpected error occurred: User-Defined Exception (WWC-44082)
(WWC-00000)
An unexpected error has occurred in portlet instances: User-Defined Exception (WWC-
44846)
An unexpected error occurred: User-Defined Exception (WWC-43000)
The following error occurred during the call to Web provider:
oracle.portal.provider.v2.PortletNotFoundException
at oracle.portal.utils.v2.ContainerException.fillInStackTrace(Unknown Source)
at java.lang.Throwable.<init>(Throwable.java:78)
at java.lang.Exception.<init>(Exception.java:29)
at oracle.portal.utils.v2.ContainerException.<init>(Unknown Source)
at oracle.portal.provider.v2.PortletException.<init>(Unknown Source)
at oracle.portal.provider.v2.PortletNotFoundException.<init>(Unknown Source)
at oracle.disco.portlet.provider.DiscoPortletPersonalizationMgr.destroy
(DiscoPortletPersonalizationMgr.java:65)
at oracle.portal.provider.v2.DefaultPortletInstance.deregister(Unknown Source)
at oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter.deregisterPortlet
(Unknown Source)
at java.lang.reflect.Method.invoke(Native Method)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.doMethodCall(Unknown Source)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.processInternal(Unknown Source)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.process(Unknown Source)
at oracle.webdb.provider.v2.adapter.SOAPServlet.doSOAPCall(Unknown Source)
at oracle.webdb.provider.v2.adapter.SOAPServlet.service(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind.server.http.ResourceFilterChain.doFilter
(ResourceFilterChain.java:59)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind.server.http.ServletRequestDispatcher.invoke
(ServletRequestDispatcher.java:523)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal
(ServletRequestDispatcher.java:269)
at com.evermind.server.http.HttpRequestHandler.processRequest
(HttpRequestHandler.java:735)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
(WWC-43147)
Edit properties for portlet List of Workbook works but in view mode we have the error in the portlet area:
"Failed to refresh portlet. Please verify that the information used to create the
portlet instance or customization is still valid. Otherwise, please contact your
iAS administrator. oracle.discoiv.controller.FatalControllerException:
DiscoNetworkException - Nested exception: org.omg.CORBA.OBJECT_NOT_EXIST: minor
code: 0 completed: No null"
Any ideas?
Thanks

Hi there,
Have you applied any patches to 9ias since it was first installed? We had the same problem and had to apply a couple of patches to get the portlets working.
1. Apply the 9.0.2.53.16 one-off patch for Oracle 9iAS Discoverer which takes Discoverer up to 9.0.2.53.16. This patch appears to be password protected and you need to get someone at Oracle support to give you a password.
2. Apply the Discoverer Portlet Provider: 9.0.2.53.00c patch (patch no. 2595444) which gives you a new discportal.xsl file that actually works. It's this second step that solves your problem but you need to do step 1 before this. This is password protected as well.
3. As you've upgraded Disco on the server to 9.0.2.53, you'll need to upgrade Disco Admin & Desktop within your 9iDS installation using patch no. 2555265. This is because Disco 9.0.2.53 uses an upgraded EUL that Disco Admin & Desktop need to be patched to use.
This was the course of action Oracle support advised us about nine months ago. Of course they may have released a further patch to Disco that does 1 & 2 in one go, but we regularly carry out steps 1 and 2 on servers we use and we can use the Disco portlets successfully.
Hope this helps
Mark Rittman
[email protected]

J2EE Application works on OC4J standalone but not Oracle 9iAS

I have a J2EE application that works successfully on OC4J 9.0.3, but not when deployed on Oracle 9iAS 9.0.3.
The platform in Win2K
What I am seeing is certain POST requests are sent to the server, call an EJB, update the database, and return a JSP, but sometimes, only half the response is seen by the browser, along with a TCP RST packet, which is why the response is not seen by the browswer.
I think this could be a bug in the Oracle HTTP server. Has anyone seen a similar problem? Are there any solutions, other than throwing away 9iAS and using a different appserver? AFAIK, it is not possible to apply any patches to the Oracle HTTP Server without losing support. Is this correct?

Hi Andrew,
Are there any solutions, other than throwing away 9iAS
and using a different appserver?As far as I know, OC4J stand-alone is a (J2EE compliant) application server, and an officially supported Oracle product. So maybe just throw away "iAS" and use OC4J ;-)
For your information, OC4J can be used with the Apache Web server. Visit the OrionSupport Web site for details.
Good Luck,
Avi.

Where to keep .rdf file in Oracle 9iAS to generate Report ?

Hello friends,
We r using Oracle 9iAS and want to generate the Report but do not know the exact folder(or can say path) to keep .rdf file ?
Generally, we keep .rdf file in Orahome/Reports/Samples/Demo/x.rdf but it doesn't work in case of Oracle 9iAS.
If you have any solutions regarding it, please reply.
Thanks

1) You can keep it anywhere and give full path name in cmd line
report=<full_path_name>\report_name.rdf
OR
2) Add the required dir to REPORTS_PATH
Windows - registry variable
HKLM\software\oracle\home<x>\
Unix - env variable
and give
report=report_name.rdf
Thanks
Ratheesh
[    All Docs     ]
http://otn.oracle.com/documentation/reports.html
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[   Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[   Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
---------------------------------------------------------------------------------

Directory Integration Platform Configuration Assistant hanging

Hi,
Installing 10gAS (10.1.2.0.2) infrastructure on Linux ES4 (64-bit) - High Availability cluster, node 1.
The Directory Integration Platform CA is hanging when I retry it, it having previously failed probably due to a Load Balancer config error on my part (I had a timeout set too low (30s) and got "Broken Pipe" error message).
Having fixed this LB config, hit retry on the CA (still in the OUI) but it is just hanging.
Tried deleting the /tmp/EM_CONFIG_INSTALL.lk file, as per the install doc, and retrying but no success.
I am on retry attempt no. 7 and previous attempt (I think attempt no. 4) reported the following in dipca.log:
oracle.ldap.oidinstall.backend.OIDCAException: Invalid Credentials
at oracle.ldap.oidinstall.backend.OIDConfiguration.sslbind(OIDConfiguration.java:814)
at oracle.ldap.oidinstall.backend.OIDConfiguration.<init>(OIDConfiguration.java:144)
at oracle.ldap.oidinstall.backend.OIDConfigWrapper.configDIP(OIDConfigWrapper.java:463)
This log has not been written to since this attempt.
Any ideas?
Thanks,
Gavin

Hi,
If the SSOCA falis, you may notice a Java Stack Trace. Can you please post the Java Stack Trace too ? It might give a clue about the problem.
Regards,
Sandeep

Directory Integration Platform Configuration Assistant - Invalid Credential

O/S: SuSE Enterprise 9
Situation: During the installer for Oracle Application Server 10g Basic Installation/Portal, I see the following error:
"Directory Integration Platform Configuration failed. Please see lofile file: /home/oracle/product/10.1.2/OracleAS/infra/ldap/log/dipca.log"
A review of dipca.log shows the following:
"oracle.ldap.oidinstall.backend.OIDCAException: Invalid Credentials at oracle.ldap.oidinstall.backend.OIDConfiguration.sslbind(OIDConfiguration.java:787"
The user authentication method set up on the server was local (/etc/passwd). Could this be my issue? If so, how do I correct it? Any thoughts as to what the issue is?

You can have the BI, J2EE and webcache in a single midtier. That should not be an issue.
The password for b2b stored in OID may be out of sync with the password you have set. Please find out what is the password in OID and then reset your b2b schema password with the password stored in OID. The way to locate the b2b password in OID is as follows:
Login to OID and traverse through the following nodes:
Entry Management | cn=OracleContext | Products | IAS | IAS
Infrastructure Database | orclReferenceName | orclResourceName=B2B
Hope this will resolve your problem,
Eng

Installation problems with oracle 9iAS v1.0.2.2.2a

Dear all, i had been having a problem to install oracle 9iAS v1.0.2.2.2a on Windows 2000 Service Pack 2 edition for the past 5 days.
I had read through the installation guide and follow steps by steps instructions. but the installer would just stop at 100% "Copying welcome.html or Copying demo.gif". It only leave with a step that it would reach the configuration setup. I am wondering anyone encounter this problem.
I had tried to install on notebook and desktop with the same platform. On the notebook, i have oracle 9i database release 2 installed on it. Thinking it might be a compatibility problem, i tried installing oracle 9iAS on a desktop with a oracle 9i database client. But i would want the application server and database to run on the same machine. Should I wait for the oracle 9iAS release 2 for NT or anyone have any advise on my problem.
i would appreicate if anyone can help. thank you.

Maybe this is a bit of a simple question. But, do you remember how long you waited, when the progress bar indicated 100%? The installation progress status does indicate "100%" for a while, doing some "last minute" stuff, before moving on to the "Configuration Tools" phase.
Yes, as Ashesh stated, Oracle9iAS 10222a and Oracle9i Database can co-exist on the same machine, as long as they are in separate ORACLE_HOMEs. And, yes, the structure you described (\oracle\database and \oracle\iASHome) does qualify as "separate ORACLE_HOMEs".
Cheers!

Tuxedo to Oracle 9iAS via JMS

A client wants to connect a Tuxedo application to an Oracle 9iAS
application (Oracle was not my choice, forced into it by upper
management). Obviously this is already well handled with Weblogic, but
how about something non-BEA? I'm not a J2EE person, but someone said
JMS Connectors, and someone else said the Java Native Interface to JMS.
I see this as a Tuxedo question, how do I interface to JMS?
Suggestions? (getting Weblogic is not a valid answer. Oracle cut the
clients annual license by a $1 Million if they would use 9iAS for their
new projects instead of Weblogic. You do the math.)
Brian Douglass
Transaction Processing Solutions, Inc.
8555 W. Sahara
Suite 112
Las Vegas, NV 89117
Voice: 702-254-5485
Fax: 702-254-9449
e-mail: [email protected]
[briand.vcf]

Brian Douglass <[email protected]> wrote:
>
But JOLT only gets me a Client connection. In my case, I need to send
messages
to the 9iAS environment and get asych responses. Other times, the 9iAS
sends me
messages and I send back asych responses (could be up to 5 days later!).Well, I guess you can sort of "call" the Java environment from the Tux side by
means of an unsolicited notification targeted to a Java JOLT "client". I am not
a Java programmer but reading the JOLT docs it seems to me it should be doable.
If it is practical in the real world might be another story, though...
I want
a queueing environment like /Q, AQ, or MessageQ, but must adhere to the
J2EE
interface standards. Does /Q support JMS?
Brian
"Per Lindström" wrote:
As long as O9iAS is a Java environment, you should be able to use JOLTto do
at least some basic integration, I guess... (and for $1M you wouldbe able
to write a LOT of JOLT code B-))
/Per
Per Lindström R2Meton AB, SWEDEN
[email protected]
Brian Douglass skrev i meddelandet <[email protected]>...
A client wants to connect a Tuxedo application to an Oracle 9iAS
application (Oracle was not my choice, forced into it by upper
management). Obviously this is already well handled with Weblogic,
but
how about something non-BEA? I'm not a J2EE person, but someone said
JMS Connectors, and someone else said the Java Native Interface toJMS.
I see this as a Tuxedo question, how do I interface to JMS?
Suggestions? (getting Weblogic is not a valid answer. Oracle cutthe
clients annual license by a $1 Million if they would use 9iAS fortheir
new projects instead of Weblogic. You do the math.)
Brian Douglass
Transaction Processing Solutions, Inc.
8555 W. Sahara
Suite 112
Las Vegas, NV 89117
Voice: 702-254-5485
Fax: 702-254-9449
e-mail: [email protected]
Transaction Processing Solutions, Inc.
8555 W. Sahara
Suite 112
Las Vegas, NV 89117
Voice: 702-254-5485
Fax: 702-254-9449
e-mail: [email protected]
Content-Description: Card for Brian Douglass
begin:vcard
n:Douglass;Brian
tel;fax:702-562-3206
tel;work:702-254-5485
x-mozilla-html:TRUE
url:www.tps-eoltp.com
org:TPS, Inc.
version:2.1
email;internet:[email protected]
title:President
adr;quoted-printable:;;8555 W. Sahara=0D=0ASuite 112;Las Vegas;NV;89117;US
x-mozilla-cpt:;15296
fn:Douglass, Brian
end:vcard

Problems with url-bindings when redeploying on Oracle 9iAS

Hello!
I'm working on a project where we're having a development server that runs Oracle 9iAS (9.03). This server is used both for system-testing and for continuous integration using Cruisecontrol. The application that we deploy is an ear-application with several web-applications and ejb-components. We have in order to make these two deployments work together defined two different application servers on the console and deployed on both of them. We have also specified prefixes, like /cc/ on the url-bindings so that we can access all the web-applications.
Our problems usually arise when Cruisecontrol does a redeploy of what it has built before it's going to test it. It uses dcmctl for this and it usually runs successfully, but sometimes the application server resets the url-bindings so that all the web-applications go to the root. Other times it removes the whole application and I've even seen it show out-of-memory errors even though it still has about a gigabyte of memory available. I don't think this is related to that single server because I've seen the same thing happening on our production-server the first time I was going to redeploy through the console-application.
Have anyone else had the same problem? (...and hopefully found a solution to it?)
It's quite annoying for us because this screws up Cruisecontrol for us at least once a day and I'm not sure how good this is for a production environment.
Regards,
Bjorn Vidar Boe

Does anybody know if Financial Brokerage Service(FBS) can be deployed on Oracle 9iAS using OEM. I got the following error when I tried to deploy the ear file:
Deployment failed: Nested exception Root Cause: Error loading web-app 'ibfbs-web' at C:\Ora9ias\j2ee\FBS\applications\ibfbs\ibfbs-web: Unknown assembly tag in file:/C:/Ora9ias/j2ee/FBS/applications/ibfbs/ibfbs-web/: <ejb-local-ref>; nested exception is: java.lang.InstantiationException: Error loading web-app 'ibfbs-web' at C:\Ora9ias\j2ee\FBS\applications\ibfbs\ibfbs-web: Unknown assembly tag in file:/C:/Ora9ias/j2ee/FBS/applications/ibfbs/ibfbs-web/: <ejb-local-ref>. Error loading web-app 'ibfbs-web' at C:\Ora9ias\j2ee\FBS\applications\ibfbs\ibfbs-web: Unknown assembly tag in file:/C:/Ora9ias/j2ee/FBS/applications/ibfbs/ibfbs-web/: <ejb-local-ref>; nested exception is: java.lang.InstantiationException: Error loading web-app 'ibfbs-web' at C:\Ora9ias\j2ee\FBS\applications\ibfbs\ibfbs-web: Unknown assembly tag in file:/C:/Ora9ias/j2ee/FBS/applications/ibfbs/ibfbs-web/: <ejb-local-ref>
Thanks ! Hi -
Can you check and see what version of 9iAS are you using?
The ejb-local-ref tag is a new tag introduced in the J2EE 1.3 specification - so you will need to be using the Oracle9iAS v9.0.3 release which is J2EE 1.3 compatible.
If you are using the v9.0.2 release then you will need to upgrade to v9.0.3
cheers
-steve-

Which is the best version of Discoverer with Oracle 9iAS ?

I have been told to find the best version of Oracle Discoverer for ORacle 9iAS - for
the ORacle Financials and HR (E-Business suite ) ?
Can anyone direct me to the manual where it explains the integration of
ORacle Discoverer with E-Business suite ?

Hi
You can only use Discoverer 9.0.2 with Application Server 9iAS. This is because Discoverer 9.0.2 is an integral part of that server. However, Discoverer 9.0.2 was never certified against Oracle Applications so you cannot use it to connect and run with 11i.
I would question why you are trying to do this because 9iAS is desupported as is the Discoverer version that goes with it. You should upgrade your AS to 10g 10.1.2 and take advantage of the latest version of Discoverer.
Please take a look at this posting on my blog: http://learndiscoverer.blogspot.com/2006/04/april-2006-oracle-discoverer-patch.html
which lists all the versions of Discoverer along with the correct patch levels and desupport dates.
The integration of Discoverer with E-Business Suite can be found in a number of documents on MetaLink:
313418.1 - discusses Discoverer 10g and 11i
233436.1 - discusses Application Server 10g and 11i
257798.1 - discussed Discoverer 9.0.4 and 11i
139516.1 - discusses Discoverer 4i and 11i
I hope this helps
Best wishes
Michael Armstrong-Smith
URL: http://learndiscoverer.com
Blog: http://learndiscoverer.blogspot.com

RunInstaller hangup in Oracle 9iAS patchset 3

When I try to execute runInstaller for the patchset 3 Oracle 9iAS it's hangup with the follow message:
[ias@serverias Disk1]$ ./runInstaller
[ias@serverias Disk1]$ Initializing Java Virtual Machine from ../../stage/Components/oracle.swd.jre/1.3.1.0.0/1/DataFiles/Expanded/jre/linux/bin/java. Please wait...
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 11 occurred at PC=0x4000ad3a
Function name=_dl_relocate_object
Library=/lib/ld-linux.so.2
Current Java thread:
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1419)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1335)
Please help me
Thanks a lot
Regards

Please confirm which version of the patch set you are using (9.0.2.3?). Also, please confirm which operating system you are running (platform and o/s version). In addition, please confirm JDK level (1.3.1_?).
Thank you.
Danielle

Oracle 9iAS vs WebMethods Integration Platform

Similar Messages

Maybe you are looking for