Oracle 9iDS under Linux

I have a problem regarding Oracle 9iDS under Linux AS 2.1.
I have installed Oracle 9iDS under Linux AS 2.1.
When i run Form builder the forms builder runs in light blue. It is its deault behaviour or i have mede any mistake. Can i change this colour scheme?
My second question is regarding to Jinitator.
Tell me how to install and configure it.
Many Thanks in advance.
Regards,
M.Usman Latif

which browser you have configured..use netscape.., it will check for the jinitator, if it doesn't get it will go to sun java and down load for you..
default blue colour is right no issues..
good luck..

Similar Messages

How to add patch in Oracle Payable under Linux

Hi All
I want to know how to apply a patch in Oracle under Linux environment. The problem is that I'm a Newbie in Oracle and i'm not a DBA and also i have little knowledge in Linux environment.
Apps: 11.5.9
OS: Linux x86
Patch : 7309767
Thanks
Edited by: 883454 on Sep 6, 2011 5:07 PM

Wrong category forum.

Hindi font problem in oracle report under linux

I want to show hindi shusha fonts in oracle reports in pdf format on linux OS.

Exception in thread "main" java.lang.UnsatisfiedLinkError:
/tmp/OraInstall2009-01-05_07-29-26PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6:
cannot open shared object file: No such file or directoryInstall libXp*.rpm packages you'll find on disk 3 of Linux distro.

Oracle Apps under LInux

Why i can't view my office's oracle apps (http://orahosts:8000/dev60cgi/f60cgi) using mandrake 10.0? I have 4 web browser (mozilla, netscape, mozilla firefox and konqueror) and 4 version of java:
jdk-1.5.0_01-fcs
j2re-1.4.1_07-fcs
j2re-1.4.2_07-fcs
jre-1.5.0_01-fcs
All the symboliclink like :
ln -fs /usr/java/j2re1.4.2_07/plugin/i386/ns610-gcc32/libjavaplugin_oji.so
i've been try (all the version of java) but i can't open my oracle apps like :
http://www.snpe.co.yu/images/sc_eng.png
or
http://www.oakland.edu/uts/banner/docs/inb/inb_doc.htm
anybody can help me?

Hi,
Please check the thread Re: Â£ is being reported in Oracle reports instead of £
Cheers!
Gautam

816 installer error under linux 7.1

Hi,
i tried to install oracle 816 under linux 7.1 . During the time of linking makefile. The following error occur :
Error in invoking target install of makefile /oraHome/network/lib/ins_net_client.mk
I have already added the 6.2 backward compatable libs(compat-eqcs,compat-glibc and compat-libs) and
export LD_ASSUME_KERNEL=2.2.5
execute the script
/usr/i386-glibc21-linux/bin/i386-glibc21-linux-env.sh
It still doesnt work !!! Why ???
CAN ANY BODY HELP !!! THANK A LOTS !!!
null

Read the other threads more carefully next time.
Alex Voitov posted this ftp site:
ftp://ftp.kernel.org/pub/software/libs/glibc/hjl/sdk/2.1/
click README.Oracle8i.
I also did what you did, but that was not enough, so I tried following the instructions in the README file mentioned above, and then I got oracle installed in Redhat 7.1 with no problems.
After you install Oracle, you may also want to follow the instructions below.
Posted by Kamal:
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>
Oracle Version 8.1.7
Linux Redhat 7.0
While installing Oracle you may encounter the error 'not able to connect to oracle'
during database creation. This is due to glibc package problem.
Please do the following
1. Install the compat-glibc RPM for 2.1.3.x
(This is on the Redhat 7.0 CDs)
2. cd to the directory where compat-glibc installed the files (for me it's
/usr/i386-glibc21-linux/lib).
3. Copy the following files to $ORACLE_HOME/lib:
libc-2.1.3.so
libpthread.so
libdl.so
ld-linux.so.2
For me, several of these are symbolic links, so you'll need to copy the target of the
symbolic link and rename it to the link name when you copy it to $ORACLE_HOME/lib.
For example, if ls -l shows:
ld-linux.so.2 -> ld-2.1.3.so
libc-2.1.3.so
libdl.so -> libdl.so.2
libpthread.so -> libpthread.so.0
Then you will:
cp ld-2.1.3.so $ORACLE_HOME/lib/ld-linux.so.2
cp libc-2.1.3.so $ORACLE_HOME/lib
cp libdl.so.2 $ORACLE_HOME/lib/libdl.so
cp libpthread.so.0 $ORACLE_HOME/lib/libpthread.so
4. Create a file in $ORACLE_HOME/lib called libc.so with the following contents (as a
single line):
GROUP ( /lib/libc-2.1.3.so /lib/ld-linux.so.2 /libc_nonshared.a )
Substitute the value of $ORACLE_HOME for and the location of the compat-glibc directory
for . For example:
My $ORACLE_HOME is:
/u01/app/oracle/product/8.1.7
and my compat-glibc directory is:
/usr/i386-glibc21-linux/lib
so the GROUP line looks like this for me:
GROUP (/u01/app/oracle/product/8.1.7/lib/libc-2.1.3.so
/u01/app/oracle/product/8.1.7/lib/ld-linux.so.2
/usr/i386-glibc21-linux/lib/libc_nonshared.a)
This is all one line.
5. cd $ORACLE_HOME/bin
6. Run the following command from the UNIX prompt:
relink all
All of the Oracle software, including the assitants, will work fine now.
I have used this technique for RedHat 7.0 with the 2.2.16 kernel.
Thanks to Richard Rankin for this simple and reliable method
Regards
Kamal
<HR></BLOCKQUOTE>

RMAN backup Oracle 9ir2. Linux RedHat

Dear all,
Where can I find information i.e. how to do RMAN backup in Oracle 91r2 under Linux RedHat environment.
Thanks in advance
SL

See Oracle9i Recovery Manager User's Guide

Oracle 9i Installation under Linux

I am trying to Install Oracle 9.0.1 under Linux.
During the Installation Process it has given some
error as follows..
ERROR in invoking target install of makefile
/home/oracle/OraHome1/plsql/lib/ins_plsql.mk
and also for sqlplus and ldap etc, etc.
I ignored those and after 100% completion
its going into a window and saying Configuring NetAssistant and its going into a loop somewhere because its not coming out from that loop even after several hours.
Can you suggest something.
Thanks and Regards.
Keshav

Check the url of SuSe :
http://www.suse.com/us/support/oracle/index.html
I guess you're trying to install on SuSE 7.3. Is that right ?

Gif images is not coming in oracle forms 9i under linux

I am trying to show images using Read_Image_File under
linux os ,at run time i am not able to see images.
If any one solution pl mail me at [email protected]

A couple of suggestions -- put the image files in your FORMS90_PATH that is set in default.env, and also be aware of case-sensitivity of file names.

Oracle 91 client under linux ppc

hello,
i´m searching for the oracle client for linux on ppc(pseries 630/670/690)
the cd-set for intel linux is, for sure, not running. there you couldn´t even start the runInstaller.
so which cd set i have to download. that are always more than 1gb to download. and so trying take much time.
thanks in advance.

no, there should be an fileset, because Joel Pérez told me to download one. but not which ;-)

Run Oracle under Linux

Hi
I am a newbie on Linux environment, now I am using Redhat AS 2.1. I've just finished installed oracle 9i on my Linux and it went successfully.
The problem is, I can't find the Oracle menu on my Redhat GUI (as in Windows), so I need a guidance of how to access & run my oracle on my Linux.
any helps / clues will be appreciated
thx

Hi,
The installation on Linux doesn't create icons on the GUI as in Windows environment.
You can run the tools and the sqlplus from a terminal.
The tools should be find in: /your oraclehome/bin
Use oemapp to load Enterprise Manager and other tools to create, modify users, instances, etc.
Good Luck!!
Eduardo

ARIAL FONT IN REPORTS(WINDOWS), NOT SHOWN CORRECTLY UNDER LINUX

Our Reports are developed under Windows (Report Builder 9.0.4.0.33 and Windows 2000/Windows XP) and generated under Linux (IAS 10.1.2.0.2 with Red Hat Advanced Server). The Report Output is a PDF, that will be downloaded by the user with WEB.SHOW_DOCUMENT. This works fine, but fonts are not shown correctly in the PDF, especially ARIAL, which is the font we use.
I have run the Fontsolution Configuration Script from Metalink, but we still have a problem.
When you look at the font.pdf, wich is the testreport from fontsolutions, some sizes and styles of Arial are printed correctly others not.
Arial 8 is ok, but Arial 10 and Arial 12 are something like Times New Roman.
Arial 12 Bolded is correct, but Arial 12 italic and Arial 12 bold italic are also not
the Arial Font.
How can we correct this problem?
Regards
Udo
These are the files changed by Fontsolution Configuration Script:
uifont.ali
# uifont.ali provided in fontsolutions.tar for developer 9.0.2
# $Header: uifont.ali@@/main/22 \
# Checked in on Tue Jan 8 15:32:42 PST 2002 by idc \
# Copyright (c) 1999, 2002 by Oracle Corporation. All Rights Reserved. \
# $
# $Revision: /main/22 $
# Copyright (c) Oracle Corporation 1994, 2002.
# All Rights Reserved.
# DESCRIPTION:
# Each line is of the form:
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet> = \
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet>
# The <Face> must be the name (string/identifier) of a font face. The
# <Style>, <Weight>, <Width>, and <CharSet> may either be a numeric
# value or a predefined identifier/string. For example, both US7ASCII
# and 1 are valid <CharSet> values, and refer to the same character set.
# The <Size> dimension must be an explicit size, in points.
# The following is a list of recognized names and their numeric
# equivalents:
# Styles Numeric value
# Plain 0
# Italic 1
# Oblique 2
# Underline 4
# Outline 8
# Shadow 16
# Inverted 32
# Overstrike 64
# Blink 128
# Weights Numeric value
# Ultralight 1
# Extralight 2
# Light 3
# Demilight 4
# Medium 5
# Demibold 6
# Bold 7
# Extrabold 8
# Ultrabold 9
# Widths Numeric value
# Ultradense 1
# Extradense 2
# Dense 3
# Semidense 4
# Normal 5
# Semiexpand 6
# Expand 7
# Extraexpand 8
# Ultraexpand 9
# Styles may be combined; you can use plus ("+") to delimit parts of a
# style. For example,
# Arial..Italic+Overstrike = Helvetica.12.Italic.Bold
# are equivalent, and either one will map any Arial that has both Italic
# and Overstrike styles to a 12-point, bold, italic Helvetica font.
# All strings are case-insensitive in mapping. Font faces are likely to
# be case-sensitive on lookup, depending on the platform and surface, so
# care should be taken with names used on the right-hand side; but they
# will be mapped case-insensitively.
# See your platform documentation for a list of all supported character
# sets, and available fonts.
# BUGS:
# o Should accept a RHS ratio (e.g., "Helv = Arial.2/3").
#===============================================================
[ Global ] # Put mappings for all surfaces here.
# Mapping from MS Windows
#Arial = helvetica
#"Courier New" = courier
#"Times New Roman" = times
#Modern = helvetica
#"MS Sans Serif" = helvetica
#"MS Serif" = times
#"Small Fonts" = helvetica
"Sadvocra" = helvetica..Oblique.Medium
"sAdC128d" = helvetica..Plain.Medium
"CarolinaBar-B39-25F2" = helvetica...Bold
#"IDAutomationSMICR" = helvetica
# Mapping from Macintosh
#"New Century Schlbk" = "new century schoolbook"
#"New York" = times
#geneva = helvetica
#===============================================================
[ Printer ] # Put mappings for all printers here.
#===============================================================
[ Printer:PostScript1 ] # Put mappings for PostScript level 1 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
#Roman = palatino
#Script = "itc zapf chancery"
#FixedSys = courier
#System = helvetica
# Mapping from Macintosh
#"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
#fixed = courier
#clean = times
#lucidatypewriter = courier
#lucidabright = times
#Arial = helvetica
#"Courier New" = courier
#"Times New Roman" = times
# MICR font
#helvetica=IDAutomationSMICR
#===============================================================
[ Printer:PostScript2 ] # Put mappings for PostScript level 2 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
#Roman = palatino
#Script = "itc zapf chancery"
#FixedSys = courier
#System = helvetica
# Mapping from Macintosh
#"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
#fixed = courier
#clean = times
#lucidatypewriter = courier
#lucidabright = times
#===============================================================
[ Printer:PCL5 ] # Put mappings for PCL 5 printers here.
helvetica = univers
times = "cg times"
clean = "antique olv"
fixed = courier
lucida = univers
lucidabright = "cg times"
lucidatypewriter = courier
"new century schoolbook" = univers
terminal = "line printer"
#===============================================================
[ Display ] # Put mappings for all display surfaces here.
#===============================================================
[ Display:Motif ] # Put mappings for Motif displays here
# Fix for bug no 778937 DO NOT MOVE!
Roman.....sjis = lucida.....jeuc
Script.....sjis = lucidabright.....jeuc
FixedSys.....sjis = fixed.....jeuc
System.....sjis = lucida.....jeuc
.....sjis = .....jeuc
# Mapping from MS Windows
Roman = lucida
Script = lucidabright
FixedSys = fixed
System = lucida
# Mapping from Macintosh
"Avant Garde" = helvetica
"Bookman" = times
#===============================================================
[ Display:CM ] # Put mappings for all CM displays here.
# These are DEC-specific, and may need localization
*..Blink = Blinking
*..Inverted+Underline.Bold = ReverseBoldUnderline
*..Inverted+Underline. = UnderlineReverse
*..Underline.Bold = UnderlineBold
*..Inverted.Bold = ReverseBold
*...Bold = Bold
*..Underline = Underline
*..Inverted = Reverse
* = Plain # The font of last resort
# Oracle Report PDF sections
# Three new sections have been added:
# [ PDF ] - Used for font aliasing and Multibyte language support
# [ PDF:Embed ] - Used for Type 1 font embedding
# [ PDF:Subset ] - Used for True Type Font subsetting
[ PDF ]
# This example shows how to rename helvetica font to Courier font
# helvetica = Courier
# You can Alias specific styles of font as below
# helvetica.12..Bold.. = Courier.14....
# "Lucida Bright".12..Bold = "New Century Schoolbook"
# Support for Far Eastern Languages:
# PDF section can be additionally used to enable Multibyte language support
# built into Reports. To use this feature with Adobe (r) Acrobat (c), you
# need to install the Asian font pack available online at the Adobe web site.
# .....SJIS = "HeiseiKakuGo-W5-Acro"
# A Japanese report run with Shift-JIS character set is replaced to
# HeiseiKakuGo-W5-Acro CID font.
arial = Arial
"arial" =Arial
"arial narrow" = "Arial Narrow"
"courier new" = "Courier New"
tahoma = Tahoma
"microsoft sans serif" = "Microsoft Sans Serif"
"ms sans serif" = "MS Sans Serif"
"times new roman" = "Times New Roman"
[ PDF:Embed ]
# This example shows how to embed Type 1 helvetica font into the PDF file:
# helvetica = "helvetica.afm helvetica.pfa"
# You need to specify the .afm file before the .pfa file.
# The font files must exist in one of the folders specified in REPORTS_PATH.
[ PDF:Subset ]
# This example shows how to subset Arial True Type font into the PDF file:
# helvetica = "Arial.ttf"
# The True Type font files must exist in any one of the folders specified in
# REPORTS_PATH.
helvetica..Oblique.Medium = "Sadvocra.ttf"
helvetica..Plain.Medium = "Sadc128d.ttf"
helvetica...Bold = "CarolinaBar-B39-25F2-Normal.ttf"
# NOTES ON PRECEDENCE OF PDF SECTIONS:
# If you have entries for a same font in many PDF sections, then Font
# Aliasing entry will take precedence over Font Embedding entry. Entries
# in Font Embedding will take precedence over the entries in Font Subsetting
# section.
# Generic entries for a font must follow more specific entries for the same
# font. For instance, if you want to subset helvetica Plain, helvetica Bold,
# helvetica Italic and helvetica Bold-Italic fonts, your entries must be:
# [ PDF:Subset ]
# helvetica..Italic.Bold.. = "Arialbi.ttf"
# helvetica...Bold.. = "Arialb.ttf"
# helvetica..Italic... = "Ariali.ttf"
# helvetica..... = "Arial.ttf"
# If helvetica..... entry appears in the top of the list, all the styles of
# helvetica font in the layout will be subset as helvetica Plain font.
uiprint.txt
# This is the printer configuration file.
# The format for entries in this file is:
# <OSName>:<Type>:<Version>:<Long Name>:<Description File>:
# The first field is the name of the printer. It is the name you give
# to lpq.
# The second field is the type of driver to be used for the printer.
# Currently, "PostScript" and "ASCII" are the only types of driver for
# printers supported for now. But in future we may be supporting
# drivers for other printer types.
# The third field is the version of the type of printer driver. It's 1
# or 2 for all PostScript printers; or 1 for ASCII printers.
# The fourth field is a long description of the printer. This will be
# presented to the user in the "Choose Printer" dialog window.
# The fifth field is the printer description file to be used. For
# PostScript printers it is the PPD file of the printer. (This field is
# currently unused for ASCII printers.)
# You can use default.ppd for the description file if you don't have a
# PPD file for the printer, but it's best to use the correct PPD file
# for the printer.
# You must fill in at least the first two fields (printer name and
# type). If the version is empty, it defaults to "1"; if the long name
# or description are empty, they will default to empty strings. A
# version of 1 or an empty long name is fine, but, for PostScript
# printers, you must fill in the description file name.
# You don't have to update this file to use any printer. The printer
# chooser interface let's you select a printer and driver at run time,
# as well as associate a printer description file to the printer. You
# should list all printers accessible to users here, however, to
# simplify selecting a printer.
# The first entry in this file will be used as the default printer, if
# no printer was selected in the operating system. (For Unix, the
# following environment variables will be used in turn to get the
# default printer's name:
# TK2_PRINTER
# ORACLE_PRINTER
# PRINTER
# For other platforms, see the Installation and User's Guide for your OS
# for information on setting the default printer.)
# WARNING: Do not define multiple entries for the same printer by the
# same name. Selecting a printer with multiple entries will always result
# in the first entry being selected. Instead, see if your OS allows you
# to create an alias for the printer, and use an alias for the second type.
# The following are examples; replace them with printers accessible from
# this machine.
# hqunx15:PostScript:1:The really slow printer on 12th floor:dcln03r1.ppd:
# hqdev2_pos:PostScript:1:The fast ScriptPrinter in 1281:dclps321.ppd:
# hqunx106:ASCII:1:LNO printer in the 11th floor printer room:none:
# hqdev9:PostScript:1:Bogus printer for Reports ASCII QA:default.ppd:
# hqunx121:PostScript:1:APO printer in 500OP for NLS QA:ok800lt1.ppd:
# --- Note that the following two printers are aliases for the same
# --- physical printer, with different names for different types:
# tk2hp4m:PCL:5:HP printer in 771 for testing PCL:ui4.hpd:
# tk2bw1ps:PostScript:1:HP printer in 771 for testing PS:hp4mp6_1.ppd:
# Not A Printer:ASCII:1:Configure your uiprint.txt file:none:
fontprinter:PostScript:1:printer for fonting fixes:default.ppd:
datap462.ppd
*PPD-Adobe: "4.0"
*% Adobe Systems PostScript(R) Printer Description File
*% Copyright 1987-1992 Adobe Systems Incorporated.
*% All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*% End of Copyright statement
*FormatVersion: "4.0"
*FileVersion: "3.1"
*PCFileName: "DATAP462.PPD"
*LanguageVersion: English
*Product: "(Dataproducts LZR 2665)"
*PSVersion: "(46.2) 1"
*ModelName: "Dataproducts LZR-2665"
*NickName: "Dataproducts LZR-2665 v46.2"
*% ==== Options and Constraints =====
*OpenGroup: InstallableOptions/Options Installed
OpenUI Option1/Optional Lower Tray: Boolean
*DefaultOption1: False
*Option1 True/Installed: ""
*Option1 False/Not Installed: ""
CloseUI: Option1
*CloseGroup: InstallableOptions
UIConstraints: Option1 False *InputSlot Lower
*% General Information and Defaults ===============
*ColorDevice: False
*DefaultColorSpace: Gray
*FreeVM: "178744"
*LanguageLevel: "1"
*VariablePaperSize: False
*FileSystem: False
*Throughput: "26"
*Password: "0"
*ExitServer: "
count 0 eq { % is the password on the stack?
true
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot perform the exitserver command.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
*End
*Reset: "
count 0 eq { % is the password on the stack?
true
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot reset printer.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush
*End
*DefaultResolution: 300dpi
*?Resolution: "
save
initgraphics
0 0 moveto currentpoint matrix defaultmatrix transform
0 72 lineto currentpoint matrix defaultmatrix transform
3 -1 roll sub dup mul
3 1 roll exch sub dup mul
add sqrt round cvi
( ) cvs print (dpi) = flush
restore
*End
*% Halftone Information ===============
*ScreenFreq: "50.0"
*ScreenAngle: "54.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: " {dup mul exch dup mul add sqrt 1 exch sub } "
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "
{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
*End
*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"
*% Paper Handling ===================
*% Use these entries to set paper size most of the time, unless there is
*% specific reason to use PageRegion.
*OpenUI *PageSize: PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter: "statusdict /lettertray get exec letterR"
*PageSize Letter.Transverse: "statusdict /lettertray get exec letter"
*PageSize Legal: "statusdict /legaltray get exec"
*PageSize Ledger: "statusdict /ledgertray get exec"
*PageSize Statement: "statusdict /statementtray get exec"
*PageSize Tabloid: "statusdict /11x17tray get exec"
*PageSize A3: "statusdict /a3tray get exec"
*PageSize A4: "statusdict /a4tray get exec a4R"
*PageSize A4.Transverse: "statusdict /a4tray get exec a4"
*PageSize A5: "statusdict /a5tray get exec"
*PageSize B4: "statusdict /b4tray get exec"
*PageSize B5: "statusdict /b5tray get exec b5R"
*PageSize B5.Transverse: "statusdict /b5tray get exec b5"
*CloseUI: *PageSize
*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter: "letterR"
*PageRegion Letter.Transverse: "letter"
*PageRegion Legal: "legal"
*PageRegion Ledger: "ledger"
*PageRegion Tabloid: "11x17"
*PageRegion A3: "a3"
*PageRegion A4: "a4R"
*PageRegion A4.Transverse: "a4"
*PageRegion A5: "a5"
*PageRegion B4: "b4"
*PageRegion B5: "b5R"
*PageRegion B5.Transverse: "b5"
*PageRegion Statement: "statement"
*CloseUI: *PageRegion
*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: Letter
*ImageableArea Letter: "20 16 591 775 "
*ImageableArea Letter.Transverse: "18 19 593 773 "
*ImageableArea Legal: "18 19 593 990 "
*ImageableArea Ledger: "18 16 1205 775 "
*ImageableArea Tabloid: "16 19 775 1206 "
*ImageableArea A3: "18 21 823 1170 "
*ImageableArea A4: "18 18 576 823 "
*ImageableArea A4.Transverse: "18 19 577 823 "
*ImageableArea A5: "18 19 401 577 "
*ImageableArea B4: "19 15 709 1017 "
*ImageableArea B5: "20 19 495 709 "
*ImageableArea B5.Transverse: "20 19 495 709 "
*ImageableArea Statement: "22 19 374 594 "
*?ImageableArea: "
save
/cvp {( ) cvs print ( ) print } bind def
/upperright {10000 mul floor 10000 div} bind def
/lowerleft {10000 mul ceiling 10000 div} bind def
newpath clippath pathbbox
4 -2 roll exch 2 {lowerleft cvp} repeat
exch 2 {upperright cvp} repeat flush
restore
*End
*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension Letter.Transverse: "612 792"
*PaperDimension Legal: "612 1008"
*PaperDimension Ledger: "1224 792"
*PaperDimension Tabloid: "792 1224"
*PaperDimension A3: "842 1191"
*PaperDimension A4: "595 842"
*PaperDimension A4.Transverse: "595 842"
*PaperDimension A5: "420 595"
*PaperDimension B4: "729 1032"
*PaperDimension B5: "516 729"
*PaperDimension B5.Transverse: "516 729"
*PaperDimension Statement: "396 612"
*RequiresPageRegion All: True
*OpenUI *InputSlot: PickOne
*OrderDependency: 20 AnySetup *InputSlot
*DefaultInputSlot: Upper
*InputSlot Upper: "0 statusdict /setpapertray get exec"
*InputSlot Lower: "1 statusdict /setpapertray get exec"
*?InputSlot: "
save
[ (Upper) (Lower) ] statusdict /papertray get exec
(get exec) stopped ( pop pop (Unknown)} if = flush
restore
*End
*CloseUI: *InputSlot
*OpenUI *ManualFeed: Boolean
*OrderDependency: 20 AnySetup *ManualFeed
*DefaultManualFeed: False
*ManualFeed True: "statusdict /manualfeed true put"
*ManualFeed False: "statusdict /manualfeed false put"
*?ManualFeed: "
save
statusdict /manualfeed get {(True)}{(False)}ifelse = flush
restore
*End
*CloseUI: *ManualFeed
*DefaultOutputOrder: Reverse
*% Font Information =====================
*% This datap462.ppd is provided by fontsolutions.tar
*DefaultFont: Courier
*Font ArialMT: Standard "(001.004)" Standard ROM
*Font Arial-ItalicMT: Standard "(001.004)" Standard ROM
*Font Arial-BoldMT: Standard "(001.004)" Standard ROM
*Font Arial-BoldItalicMT: Standard "(001.004)" Standard ROM
*Font ArialNarrow: Standard "(001.004)" Standard ROM
*Font ArialNarrow-Italic: Standard "(001.004)" Standard ROM
*Font ArialNarrow-Bold: Standard "(001.004)" Standard ROM
*Font ArialNarrow-BoldItalic: Standard "(001.004)" Standard ROM
*Font CourierNewMT: Standard "(001.004)" Standard ROM
*Font CourierNew-ItalicMT: Standard "(001.004)" Standard ROM
*Font CourierNew-BoldMT: Standard "(001.004)" Standard ROM
*Font CourierNew-BoldItalicMT: Standard "(001.004)" Standard ROM
*Font Courier: Standard "(001.004)" Standard ROM
*Font Courier-Bold: Standard "(001.001)" Standard ROM
*Font Courier-BoldOblique: Standard "(001.001)" Standard ROM
*Font Courier-Oblique: Standard "(001.001)" Standard ROM
*Font Helvetica: Standard "(001.001)" Standard ROM
*Font Helvetica-Bold: Standard "(001.001)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.001)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.001)" Standard ROM
*Font IDAutomationSMICR: Standard "(001.001)" Standard ROM
*Font Symbol: Special "(001.001)" Special ROM
*Font Tahoma: Standard "(001.001)" Standard ROM
*Font Tahoma-Bold: Standard "(001.001)" Standard ROM
*Font Times-Bold: Standard "(001.001)" Standard ROM
*Font Times-BoldItalic: Standard "(001.001)" Standard ROM
*Font Times-Italic: Standard "(001.001)" Standard ROM
*Font Times-Roman: Standard "(001.001)" Standard ROM
*Font TimesNewRomanMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-BoldMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-BoldItalicMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-ItalicMT: Standard "(001.001)" Standard ROM
*?FontQuery: "
save
/str 100 string dup 0 (fonts/) putinterval def
count 1 gt
exch dup str 6 94 getinterval cvs
(/) print print (:) print
FontDirectory exch known
{(Yes)}{(No)} ifelse =
{exit} ifelse
}bind loop
(*) = flush
restore
*End
*?FontList: "
FontDirectory { pop == } bind forall flush
(*) = flush
*End
*% Printer Messages (verbatim from printer):
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"
*% Status (format: %%[ status: <one of these> ]%% )
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "printing"
*Status: "warming up"
*Status: "PrinterError: BD check"
*Status: "PrinterError: Paper jam"
*Status: "PrinterError: Replace toner bag"
*Status: "PrinterError: Warming up"
*Status: "PrinterError: Timing error"
*Status: "PrinterError: Fuser check"
*Status: "PrinterError: Cover opened"
*Status: "PrinterError: Toner empty"
*Status: "PrinterError: Empty & reset output bin(s)"
*Status: "PrinterError: Sorter or jogger error"
*Status: "PrinterError: Scanner check"
*% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
*Source: "serial9"
*Source: "serial25"
*Source: "AppleTalk"
*Source: "Centronics"
*% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
*PrinterError: "BD check"
*PrinterError: "Paper jam"
*PrinterError: "Replace toner bag"
*PrinterError: "Warming up"
*PrinterError: "Timing error"
*PrinterError: "Fuser check"
*PrinterError: "Cover opened"
*PrinterError: "Toner empty"
*PrinterError: "Empty & reset output bin(s)"
*PrinterError: "Sorter or jogger error"
*PrinterError: "Scanner check"
*%DeviceAdjustMatrix: "[1 0 0 1 0 0]"
*% Color Separation Information =====================
*DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi
*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow
*% For 60 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"
*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"
*% For 53 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"
*% For "Dataproducts LZR 2665" version 46.2
*% Produced by "GETapd.ps" version 2.0 edit 47
*% Converted to meet 4.0 specification
*% Last Edit Date: Sep 15 1992
*% The byte count of this file should be exactly 011228 or 011572
*% depending on the filesystem it resides in.
*% end of PPD file for Dataproducts LZR 2665

If you want to make platform independent use of fonts, you have to use the family, such as sans serif.
Arial is owned by monotype (http://monotype.com/). You have to contact them if you wish to redistribute it with your application. They also might have a suitable version that renders nicely under linux.
Pete

Failed to install enterprise manager under linux

When I installed Oracle 10g(10.2.0.1) under linux, I got an error when running
/ora01/db/oracle/product/10.2.0.1/bin/emca within oracle universal installer.
The emConfig.log file shows such error:
oracle.sysman.emcp.exception.EMConfigException: Invalid value null for parameter PORT
at oracle.sysman.emcp.ParamsManager.checkParam(ParamsManager.java:2630)
at oracle.sysman.emcp.EMDBPreConfig.checkConfigParams(EMDBPreConfig.java:1285)
at oracle.sysman.emcp.EMDBPreConfig.checkParameters(EMDBPreConfig.java:1060)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:174)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:426)
at java.lang.Thread.run(Thread.java:534)
So I have to run emca after the oracle installation. I am new to this tool. I modified both tnsnames.ora and listener.ora file to set port to 1521. And then I run emca -config all db,
but now I cannot pass "entering the password for SYS user" (I already set SYS user's password to oracle, and it works when using sqlplus.) .
I am totally confused. What should I run emca to set up the enterprise manager's website? Now I can use localhost:5560/isqlplus and localhost:5560/isqlplus/dba.
Many thanks!!

I just run emca as oracle instead of root, then the password got passed, but I got new errors:
Aug 30, 2007 5:59:59 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
What should I do? Is running emca -config all db necessary to get enterprise manager installed?

Problems importing to 8.1.6 SE under Linux from 8.1.6 Solaris

Dear collegues,
We used Oracle 8.1.6 SE under linux mostly for development and have a need do import production database into developement server. We recently upgraded RedHat 5.2 to RedHat 6.2 and omved to Oracle 8.1.6, but currently expirienced next problem:
IMP-00003: ORACLE error 1874 encountered
ORA-01874: time zone hour must be between -12 and 13
IMP-00000: Import terminated unsuccessfully
Import file made under Solaris when timezone set to usual POSIX value. Under Linux I tried to set TZ both to values like 'GMT+6' and according new glibc docs to 'Asia/Novosibirsk'. When I export and then import data on linux I have allthings OK. If I have files from 8.0.5 It's OK too. Does anyone expirienced such problems? Any suggestion?
Serge.

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Graham Strang ([email protected]):
Hey all. Just to let you know that it is entierly possible to get Oracle to install under RedHat 7 and run happily. I have done it on two differenct machines. There is a bit of fooling with glibc to get it to work. However after you do that it works like a dream. VALinux has a work around posted at: http://ftp.valinux.com/pub/support/hjl/glibc/sdk/2.1/
The READEME.Oracle8i has the work around and the two tar balls are the necessary files. I followed the directions to the letter and they worked like a dream. Any questions feel free to drop me a line.
Cheers,
Graham<HR></BLOCKQUOTE>
OK, so i followed your instructions to the letter (several times), sure I get past the 80% bug but now I have new erros coming up , -"Error in invoking target install of makefile /usr/oracle/sqlplus/lib/ins_sqlplus.mk". I get a whole series of these errors for various mk files. These errors apear during the link phase of the install, prior to the glibc workaround I was not getting this. I am a newbie to Linux and trying to give it a serious go but so far I have had little luck
Any help appreciated.
Nick
null

HOW TO Install Oracle 10g on Linux on POWER

Hi Linuxers,
SAP has released the Oracle 10g Database Software for Linux running IBM's <a href="http://www.ibm.com/systems/linux/power/">POWER(TM)</a> platform in the first half of 2006. The release has come with a few headaches. SAP's Development Support receives so many of the same questions that I thought a little how to would be in order. In my first <a href="/people/patrick.hartman/blog/2006/10/17/how-do-i-install-oracle-102-on-ibm-linux-on-power">Blog</a> entry on the SAP Developer's Network, I have taken SAP Note <a href="https://service.sap.com/sap/support/notes/945315">945315</a>, <i>SAP installation with Oracle 10.2 under Linux on POWER</i>, and tried to thoroughly explain each and every point. If you plan to run, or are running, SAP on Oracle and plan to install on the IBM System p line of servers, this <a href="/people/patrick.hartman/blog/2006/10/17/how-do-i-install-oracle-102-on-ibm-linux-on-power">Blog</a> entry should help you.
Regards,
Trick

Hi,
I think you can forget it. Oracle 10g R2 was the last version supported on Linux PowerPC.
Cheers,
David
OCP 9i
http://www.oratoolkit.ch/knowledge/howto/installation/otn.php

How to install oracle on ubuntu linux 10.1

hi i have been trying to install my oracle 11g in ubuntu 10.1 linux any one have direction for me where to go maybe manual
Edited by: user603350 on 2011/08/03 12:45 PM

None of the Oracle installation, Express or Enterprise Edition are really easy by today's standards. Both installation have their specific challenges. The following should answer your questions:
Oracle 10g Express on Ubuntu 10.10 AMD 64-bit howto
Oracle 10g Express on Ubuntu 10.10 AMD 64-bit howto
Install Oracle 11gR2 on Ubuntu Linux 11.04 (64-bit) Howto
Install Oracle 11gR2 on Ubuntu Linux 11.04 (64-bit) Howto
Oracle 10g Express on Fedora 14 64-bit howto
Oracle 10g Express on Fedora 14 64-bit howto
Installing Oracle 11g R2 on Ubuntu 10 Howto
Installing Oracle 11g R2 on Ubuntu 10 Howto
Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
I think the installation of Oracle database under Oracle Linux is the least troublesome because you an install the "oracle-validated" package, which takes care of software prerequisites and system parameters. Enterprise Linux is however not suitable for Desktop and Laptop systems. For the purpose of development or evaluating Oracle products I suggest to use Virtualbox http://www.virtualbox.org. If your system is too old or not well equipped to support virtual systems, consider a hardware upgrade or try the howto's above.

Oracle 9iDS under Linux

Similar Messages

Maybe you are looking for