Oracle access server installation issue
is oracle identity management infrastructure 10.1.4.0.1 is compatible with i oracle access management identity server and web pass 10.1.4.3.0
reply asap
Edited by: Aditya on Jun 7, 2011 11:44 AM
Hey Aditya,
I can see it in this document below:
1-http://www.google.com/url?sa=t&source=web&cd=1&ved=0CBkQFjAA&url=http%3A%2F%2Fwww.oracle.com%2Ftechnetwork%2Fmiddleware%2Fdownloads%2Foracle-accessmgr-10gr3-certmatrix-132000.xls&rct=j&q=certification%20matrix%20oam%2010.1.4.3&ei=7SbuTcK5AeLV0QHjm8SRCA&usg=AFQjCNEmg3xQgbQpEdItzo-tOcgMR_xSDA&cad=rja
-->Oracle Access Manager (OAM) 10.1.4.0.1+ Oracle Oracle Application Server 10g (10.1.2.x) n/a 32 Integration available on all supported platforms n/a n/a More details could be found under http://download.oracle.com/docs/cd/E10761_01/doc/oam.1014/e10356/osso.htm#CEGCEAJI
-->Oracle Access Manager (OAM) 10.1.4.0.1+ Oracle Oracle Application Server 10g (10.1.3.x) n/a 32 Integration available on all supported platforms n/a n/a More details could be found under http://download.oracle.com/docs/cd/E10761_01/doc/oam.1014/e10356/osso.htm#CEGCEAJI
-->Oracle Access Manager (OAM) 10.1.4.0.1+ Oracle Oracle Application Server 10g Single Sign-On (10.1.2.x) n/a 32 Integration available on all supported platforms n/a n/a More details could be found under http://download.oracle.com/docs/cd/E10761_01/doc/oam.1014/e10356/osso.htm#CEGCEAJI
-->Oracle Access Manager (OAM) 10.1.4.0.1+ Oracle Oracle Application Server 10g Single Sign-On (10.1.4.x) n/a 32 Integration available on all supported platforms n/a n/a More details could be found under http://download.oracle.com/docs/cd/E10761_01/doc/oam.1014/e10356/osso.htm#CEGCEAJI
2-http://download.oracle.com/docs/cd/E10761_01/doc/oam.1014/e10356/osso.htm#CEGCEAJI
3-You can also go to metalink and research in certification tab more details there.
I hope this helps.
Thiago Leoncio Guimaraes
Similar Messages
-
Oracle VM Server Installation Issues
The Oracle VM Server 2.2.1 installation hangs after I pick US keyboard and does nothing after. I’ve tried other options including an old version of VM Server and I receive an error that states "isw: untested metadata version 1.2.04 found on /dev/sda", although the installation hangs in the same place. I’m not sure what the issue is and need some help.
Also, just as a test, I installed Oracle Enterprise Linux R5-U5-Server on the hardware without any issues. I see everything, and it is a nice OS.
Hardware details:
I had Fry’s build a U4 server.
Six 300 GB 10k rpm SATA on a raid 5 stripe
Two 1.8 TB 7200 rpm SATA on a raid 0 mirror
Motherboard GIGABYTE GA-X58A-UD3R
24GB of DDR3 memory
Intel Core i7-980X 3.33 GHX 12MB 6Core processor 64Bit
Thanks for any help!!
Robert
[email protected]In order to get your HDs detected you will need to create a driver disk. Check this link out so you can create one.
http://www.redhat.com/docs/manuals/linux/RHL-8.0-Manual/install-guide/ch-driverdisk.html
What the driver disk will do is load the driver disk image you need, and once you do that it should auto detect your drives.
This should at least get you headed in the right direction :)
Of course steps before creating the driver disk you will need to find out what driver you require and get a driver disk image of that driver to load to your bootable floppy/usb. In the example page they use a floppy, but any bootable media will work.
Good luck,
Roger. -
Oracle 11g Server Installation and Configuration
Hi All..
I would like to know the estimate(in detail) for Oracle 11g Server Installation and Configuration.
This is for a server and we might even need to replicate the entire DB.
Can any on please help me out in this .
Thank youHi,
Please post your question in the [Database |http://forums.oracle.com/forums/category.jspa?categoryID=18] forum.
Regards,
Hussein -
Listner issues in Oracle 11g server installation
Hi,
I am facing problem while connecting to Oracle 11g server on 'Windows 7 Enterprise edition - 32 bit OS'.
I have successfully installed Oracle 11g server on Windows & enterprise machine.
Listener and TNSnames.ora files are fine. But I am not able to connect through Oracle client machine. it shows 'TNS: Could not resolve the service name'.
When I check the listener status on the server, it shows the service ABBPROD is READY, but still not able to connect through client machine. I have gone through many similar threads and tried out the solutions provided but the problem still exists. Few of the things I tried are as below.
1. I have tried changing the ORACLE_SID and setting the $ORACLE_HOME parameter.
2. Tried replacing the HOST as 'localhost' to system IP address/computer name
3. Listener stop and start
4. Service stop and start
5. Checked the firewall settings of the server machine
I shall paste the listener.ora and tnsnames.ora files below.
LISTENET.ORA
# listener.ora Network Configuration File: C:\app\INSAJEN\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\app\INSAJEN\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:C:\app\INSAJEN\product\11.2.0\dbhome_1\bin\oraclr11.dll")
(SID_DESC =
(SID_NAME = ABBPROD)
(ORACLE_HOME = C:\app\INSAJEN\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:C:\app\INSAJEN\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
ADR_BASE_LISTENER = C:\app\INSAJEN
TNSNAMES.ora file
# tnsnames.ora Network Configuration File: C:\app\INSAJEN\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
ABBPROD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.140.233.130)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = abbprod)
LISTENER_ABBPROD =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
SQLNET.ORA
# sqlnet.ora Network Configuration File: C:\app\INSAJEN\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)Please help me to debug and resolve the problem. If any more information is required, please let me knowSBH wrote:
I checked the global_name, it is ABBPROD.asiapacific.abb.com...
I tried setting the ORACLE_SID same as this name, but still the same issue exists
@Mahir, this is a production environment, and I cannot take risk of rebuilding tnsnames and listener.ora filesand
I am facing problem while connecting to Oracle 11g server on 'Windows 7 Enterprise edition - 32 bit OS'.
I have successfully installed Oracle 11g server on Windows & enterprise machine.Your production sever running on Windows 7 EE 32bit? -
Oracle Application server related issue
My application is developed using Oracle Developer suite 10g (10.1.2.0.2 ) and deployed in Oracle Application Server 10g R2 (10.1.2.0.2) in windows 2003 32 bit and its working fine.
My issue is as follows
1. Since Oracle Application Server 10g R2 (10.1.2.0.2) is not supported in windows 2008 64 bit, pls advise what version of Application Server 10g i should use. Please note that my
programs are developed using Oracle Developer suite 10g (10.1.2.0.2 ).
2. If i want to move to next development version (ie forms / Reports 11g) , which version of application server should i use.
JoeThe 2nd disk is Companion CD. It contains the install files for other components.
For instance, If you want to install Oracle HTTP Server only, then you use the companion CD to do so. It has many other individual installations.
Aalap Sharma :) -
Folks,
Hello. Initially, my Windows XP host name is "localhost" and IP address 127.0.0.1.
I installed Oracle Database 11g with Windows XP successfully and all Database clients work with Database instance correctly.
For some reasons, I uninstalled the entire Database Server and delete the entire installation directory /oracle.
I configured Windows XP IP address into 192.168.196.101 in order to ping other machines.
For my need, I installed Oracle Database 11g with Windows XP again. On step 7 of 8: Oracle Database Configuration Assistant, I got this error:
ORA-12560:TNS: protocol adapter error.
I click "Password Management" button, there are no rows in this Windows (no username, no lock accounts).
I check listener as below:
C:\>lsnrctl
LSNRCTL>start
Its output: listener name LISTENER has already been started.
LSNRCTL>status
Its output: ......Service DB1 has 1 instance. Instance DB1 status ready. The command completed successfully.
I check \Oracle\cfgtoollogs\dbca\DB1\trace file, the entry is :
listen[0]=LISTENER address=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(port=1522))
I also check \oracle\product\11.2.0\dbhome_1\NETWORK\ADMIN\SAMPLE\tnsnames.ora file and listener.ora file, the entries are the same as below
HOST=localhost port=1522
I think HOST=localhost and port=1522 is the cause of the error ORA-12560 because Windows XP has been configured into HOST=192.168.196.101.
But I don't understand how to solve this issue.
Can any folk tell me how to solve this issue ? need to cancel the installation on step 7 of 8 and install it again ?
Thanks.Folks,
Hello. Oracle Database 11g Installation Wizard is on step 7 of 8. I don't cancel the Wizard. I am not sure whether there is effect or not. listener.ora is not removed. I have been waiting for a while after stop listener. I run the 3 commands again and copy the result as below:
C:\>lsnrctl stop
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 14-AUG-2013 19:32
:14
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1522)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
64-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1522)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
64-bit Windows Error: 61: Unknown error
C:\>
C:\>
C:\>
C:\>
C:\>
C:\>lsnrctl start
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 14-AUG-2013 19:33
:04
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
System parameter file is C:\SecondTime_OracleDatabase_Install_Directory\product\
11.2.0\dbhome_1\network\admin\listener.ora
Log messages written to c:\secondtime_oracledatabase_install_directory\diag\tnsl
snr\user-19yyar8x0d\listener\alert\log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1522
ipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1522)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 14-AUG-2013 19:33:07
Uptime 0 days 0 hr. 0 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\SecondTime_OracleDatabase_Install_Directory\product
\11.2.0\dbhome_1\network\admin\listener.ora
Listener Log File c:\secondtime_oracledatabase_install_directory\diag\tn
slsnr\user-19yyar8x0d\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1522ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
C:\>
C:\>
C:\>
C:\>
C:\>lsnrctl service
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 14-AUG-2013 19:36
:37
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1522)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "DB1XDB" has 1 instance(s).
Instance "DB1", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: user-19YYAR8X0D, pid: 120>
(ADDRESS=(PROTOCOL=tcp)(HOST=user-19yyar8x0d)(PORT=1051))
Service "DB1" has 1 instance(s).
Instance "DB1", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:19 refused:0 state:ready
LOCAL SERVER
The command completed successfully
C:\>
As we see, listener.ora file is not removed by Stop command. I am on the installation Wizard. How to solve this issue ?
Thanks. -
Oracle VM OEL Installation issue
Hi Team,
I have a new laptop with Windows 8. I am trying to setup the Oracle environment using Oracle Virtual Box. I have downloaded the part numbers V33411-01 (boot) and V33412-01 (Linux). The boot CD boots the server without issues and after few installation steps it prompts for Linux CD. When I insert the same, I get the error “The oracle linux server disc was not found in any of your cd rom drives.”
When I try to do a media check for the second CD, I get the error “unable to find the checksum in the image. This probably means the disc was created without adding the checksum.”
I tried to install using the second CD directly but it fails as the CD is not bootable. Can you please help me in fixing this issue?
Regards,
AntonyI don't know exactly what you're trying to do.... but all the installation media for OEL are bootable. I don't why you would have just a "boot" media that would require you to load a second disk... Unless you are using the CD installation and not the DVD iso. Why not just download the DVD iso?
Edited by: user12273962 on Jan 21, 2013 5:59 AM -
How to change Host of Oracle Access Server
Hello guys,
Could you help me about on doubt?
I configured Access Server in Access Administration and installed it in the server. But i saw now i forgotted about the correct hostname of this configuration. Is not a machine name and i need to change to the LBR name. Can i delete this access server , create another one with the same name without install again the File Systems?
best regards,
Thiago Leôncio.It's not clear from your question which components of OAM you are referring to.
I'll presume you are talking about the aaa server process and it's LDAP connection, you can handle this by reconfiguring the product. Look in /access/oblix/tools/ for a setup or configure folder containing an executable. Running that will allow you to reset the bootstrap configuration information.
Not knowing much about your installation, I'll offer a caution that it is unusual to point an Access Server to a lb for configuration information. You can get away with it for RACed OID LDAP platforms but otherwise, I'm pretty sure it's not a supported path.
Mark -
Not able to create a Volume Group in the oracle VM server installation
Hi,
I am installing Oracle VM server. In the installtion ( Partition time ), i click on create custom layout and i want to create a / partition as a logical volumn under volume group. But there is no option to create a Volume group actually. So can anybody help how to create a volume group actually and how to create a logical volume under volume group.user10274248 wrote:
So can anybody help how to create a volume group actually and how to create a logical volume under volume group.LVM is not recommended in Dom0, which is why support for LVM has been removed from the installer. LVM is not cluster aware and does not support write barriers, both of which are important for a filesystem that is used for storing file-backed disk images. -
Oracle Application Server Install Issue
Gurus,
There were 2 CD/DVDS (media) sent for the Oracle Application Server Install, but the Oracle Universal Installer did not ask for the 2nd CD while doing the Install, is this normal or I am not sure I missed any steps while installing the 1st CD/DVD.
I was waiting that it would ask for the IInd CD/DVD, But it never? but the Install looked clean and exited clean without any error.
Please advice.
Thanks
SheikThe 2nd disk is Companion CD. It contains the install files for other components.
For instance, If you want to install Oracle HTTP Server only, then you use the companion CD to do so. It has many other individual installations.
Aalap Sharma :) -
Oracle BPEL server installation - Infrastructure requirement
I am trying to check the feasibility analysis of infrastructure / Hardware required for installation of Oracle BPEL process engine.
We have a separate database server and Application server.
DB server and App server config details are :
2 HP RP 3440 Servers with PA-RISC2.0 with
8GB of RAM.
Oracle 10g database is present in DB server.
Oracle Application server 10g is present in the Apps server.
If we want to install Oracle BPEL server in OracleAS Middle Tier architecture, should we install Oracle BPEL process manager in a separate server or can we install in one of the existing DB or Apps server.
Please help me on this.
Gopi.I am trying to check the feasibility analysis of infrastructure / Hardware required for installation of Oracle BPEL process engine.
We have a separate database server and Application server.
DB server and App server config details are :
2 HP RP 3440 Servers with PA-RISC2.0 with
8GB of RAM.
Oracle 10g database is present in DB server.
Oracle Application server 10g is present in the Apps server.
If we want to install Oracle BPEL server in OracleAS Middle Tier architecture, should we install Oracle BPEL process manager in a separate server or can we install in one of the existing DB or Apps server.
Please help me on this.
Gopi. -
Oracle EBS 11i Installation issues
Dear All,
I am trying to install Oracle EBS 11i on Redhat Enterprise Linux 4.5
[oracle@machine1 /]$ cd /Stage11i/startCD/Disk1/rapidwiz/
[oracle@machine1 rapidwiz]$ ./rapidwiz
Note: i have started the installation logged as user oracle which is member of groups oinstall and dba
the installatio starts without warning but suddenly installation aborted by giving the message check the log
/u01/oracle/proddb/9.2.0/appsutil/log/PROD-macnine1/021804050.log to see the errors
when i checked the specified log file ,some errors found here described below
runProcess_6
Statusstring Executing Command: adlnkoh.sh
adlnkoh.sh started at Mon Feb 18 18:32:18 UZT 2008
logfile located in /u01/oracle/proddb/9.2.0/install/make.log
Error while running adlnkoh.sh. Please check logfile
Errors while running adlnkoh.sh
There was an error while running the command -
/u01/oracle/proddb/9.2.0/temp/PROD_machine1/adrun9i.sh APPS APPS
/u01/oracle/proddb/9.2.0/appsutil/install/adlnkoh.sh: line 198:
/u01/oracle/proddb/9.2.0/bin/sqlplus: No such file or directory
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file
for details.
and when i check the log file /u01/oracle/proddb/9.2.0/install/make.log
many errors found like these
chmod 6751 /u01/oracle/proddb/9.2.0/bin/oracle
chmod: cannot access `/u01/oracle/proddb/9.2.0/bin/oracle': No such file or
directory
make: [ioracle] Error 1 (ignored)
mv /u01/oracle/proddb/9.2.0/rdbms/lib/oracle
/u01/oracle/proddb/9.2.0/bin/oraclemv: cannot stat
`/u01/oracle/proddb/9.2.0/rdbms/lib/oracle': No such file or directory
make: [ioracle] Error 1 (ignored)
chmod 6751 /u01/oracle/proddb/9.2.0/bin/oracle
chmod: cannot access `/u01/oracle/proddb/9.2.0/bin/oracle': No such file or
directory
make: [ioracle] Error 1 (ignored)
Completed...
/u01/oracle/proddb/9.2.0/bin/oracle did not relink properly.
Please review relink errors in this log file
The user Oracle (by which installation is in progress) has all privileges on base directory /u01 (used for 11i install)
Here is the permissions for both directoried Stage11i and /u01
Code: Select all
drwxr-xr-x 7 root root 4096 Feb 15 13:03 Stage11i
drwxr-xr-x 3 oracle oinstall 4096 Feb 18 17:05 u01Now i had started the installation again and once again unable to do this
i had seen the errors while checking the logfile created during installation
Statusstring Creating the database controlfile...
adcrdb.sh started at Fri Feb 22 21:37:23 UZT 2008
The environment settings are as follows ...
ORACLE_HOME : /u01/oracle/testdb/9.2.0
ORACLE_SID : TEST
TWO_TASK :
PATH : /u01/oracle/testdb/9.2.0/Apache/perl/bin:/u01/oracle/testdb/9.2.0/bin:/usr/bin:/usr/sbin:/u01/oracle/testdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/usr/bin:/Stage11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/oracle/bin
LD_LIBRARY_PATH : /u01/oracle/testdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u01/oracle/testdb/9.2.0/ctx/lib
Executable : /u01/oracle/testdb/9.2.0/bin/sqlplus
The log information will be written to
/u01/oracle/testdb/9.2.0/appsutil/log/TEST_machine1/adcrdb_TEST.txt
Creating the control file for TEST_machine1 database ...
SQL*Plus: Release 9.2.0.6.0 - Production on Fri Feb 22 21:37:33 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 581506668 bytes
Fixed Size 452204 bytes
Variable Size 402653184 bytes
Database Buffers 167772160 bytes
Redo Buffers 10629120 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01200: actual file size of 120647 is smaller than correct size of 192000
blocks
ORA-01110: data file 394: '/u01/oracle/testdata/a_ref01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u01/oracle/testdata/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.localdomain"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 581506668 bytes
Fixed Size 452204 bytes
Variable Size 402653184 bytes
Database Buffers 167772160 bytes
Redo Buffers 10629120 bytes
ORA-00205: error in identifying controlfile, check alert log for more info
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-00210: cannot open the specified controlfile
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 3284
ORA-06512: at line 1
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 581506668 bytes
Fixed Size 452204 bytes
Variable Size 402653184 bytes
Database Buffers 167772160 bytes
Redo Buffers 10629120 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01200: actual file size of 120647 is smaller than correct size of 192000 blocks
ORA-01110: data file 394: '/u01/oracle/testdata/a_ref01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u01/oracle/testdata/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.localdomain"
ERROR at line 1:
ORA-01109: database not open
declare lib_ver varchar2(3);
ERROR at line 1:
ORA-01219: database not open: queries allowed on fixed tables/views only
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
exit_code=1
Checking for errors ...
ORA-01503: CREATE CONTROLFILE failed
ORA-01200: actual file size of 120647 is smaller than correct size of 192000
ORA-01110: data file 394: '/u01/oracle/testdata/a_ref01.dbf'
ORA-01507: database not mounted
ORA-01109: database not open
ORA-01109: database not open
ORA-01507: database not mounted
ORA-00205: error in identifying controlfile, check alert log for more info
ORA-00210: cannot open the specified controlfile
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 3284
ORA-06512: at line 1
ORA-01503: CREATE CONTROLFILE failed
ORA-01200: actual file size of 120647 is smaller than correct size of 192000
ORA-01110: data file 394: '/u01/oracle/testdata/a_ref01.dbf'
ORA-01507: database not mounted
ORA-01109: database not open
ORA-01109: database not open
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 9.2.0.6.0 - Production on Fri Feb 22 21:39:16 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
Cannot create control file for TEST
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for TEST instance -
Access Server SDK issue.
We have set up SSO for one of our application (App1) and is working fine(in production). I am configuring one more application(App2) for SSO.
App1 is setup using webgate on our proxy server. all the request go through the webgate, urls are validated against the policy server and are given access. no problems here
App2 - Webgate installed on my local machine proxy apache server, configured the new policy domain, and using the same identity servers as app1, the app is working fine. I am trying to decode the obssocookie to retrieve the userid, I have created a webservice which takes in the obssocookie and decodes it go retrieve the user name, so that the service can be used in different applications(which are not on sso) kind of authenticate the user against the OAM if the user is already logged in.
My question is I have webgate configured on my local machine and also installed the access server sdk (Oracle_Access_Manager10_1_4_0_1_Win32_AccessServerSDK.exe) on my local machine, setup the classpath and path variables as discribed in admin guide. I am running weblogic 9.2. My index.jsp page accepts the user credentials and posts it to login.jsp ( Ihave protected the login.jsp) in the policy domain with the form based authentication schem.
I have created a testsso.jsp (unprotected page) to test the sdk. below is my code. i always get an error when i access the testsso.jsp page
cm=my_webgate challenge=268e2d09986e24c7
8-1-2009 12:41:17 Received message: 0 14
cm=access_dlsso01 challenge=071a577990ee977d st=ma=25 rt=1
8-1-2009 12:41:17 Sending message: 0 15
response=7b951e1ae2109fb4c7319060f2b9dc57
8-1-2009 12:41:17 Received message: 0 15
response=c045c076d3af5af4a2038a45ede9613f st=ma=25 rt=1
8-1-2009 12:41:17 Sending message: 0 1
ro=t=0 o= no= r= nr= wu=http://mymachine/myapp/login.jsp wh= wo=1 wa=0 ws= st=ma=6 mi=20 sg=0 sm= version=3 pd=NULL
8-1-2009 12:41:17 Received message: 0 1
ro=t=0 o= no= r= nr= wu=http://mymachine/myapp/login.jsp wh= wo=1 wa=0 ws= ri=NULL st=ma=5 mi=20 sg=3236 sm= rt=0
com.oblix.access.ObAccessException: Unprotected resource GET HTTP:http://mymachine/myapp/login.jsp pass
ed to the ObResourceRequest, so there is no associated authentication scheme.
ObResourceRequest resReq = null;
ObUserSession user = null;
ObAuthenticationScheme authnScheme = null;
Hashtable cred = new Hashtable();
cred.put("userid", "TEST");
cred.put("password", "TEST");
try
// put the correct path to your AccessSDK installation here
ObConfig.initialize("C:\\OAM\\oblix\\AccessServerSDK");
resReq = new ObResourceRequest("HTTP", "http://mymachine/myapp/login.jsp", "GET");
// check if it is protected, if yes, create a user session
//if (resReq.isProtected()) { // commented since the resource is always comming as unproctected. when I used the access tester
// i get that the resource is always protected with a authentication schema
authnScheme = new ObAuthenticationScheme(resReq);
if (authnScheme.isBasic()) {
System.out.println("##################is protected #################");
user = new ObUserSession(resReq, cred);
if (user.getStatus() == ObUserSession.LOGGEDIN) {
System.out.println("user status is LOGGEDIN " + user.getStatus());
if(user.isAuthorized(resReq)) {
System.out.println("Permission GRANTED");
token = user.getSessionToken();
} else {
System.out.println("user status is NOT LOGGEDIN " );
} else {
System.out.println("is not basic");
/*} else {
System.out.println("is not protected");
ObConfig.shutdown();
} catch (Exception oe) {
ObConfig.shutdown();
oe.printStackTrace();
please advice on how to use the sdk
Edited by: user7498134 on Jan 8, 2009 10:35 AMLooking at the exception - "com.oblix.access.ObAccessException: Unprotected resource GET HTTP:http://mymachine/myapp/login.jsp passed to the ObResourceRequest, so there is no associated authentication scheme.", it seems like what the SDK wants is the resource to be passed as "//mymachine/myapp/login.jsp", i.e. leave out the redundant "http:" from your URL in the program.
Let me know if that helps.
-Vinod -
Oracle PIM Sync installation issues
We have experienced the PIM Sync installation issue where the client couldn't detect Outlook. We have several work stations downloaded the file and only one station has installed it successfully. We even tried to use the file that worked on that station to install into the ones that didn't work. However, we got no luck. Some of us had "Cannot Connect to Oultook" and some of us had error code - 0x083200006. Does someone have the same issue? We submitted a SR to Oracle Customer Care but haven't heard anything from them yet. We are hoping this got resloved as soon as possible. thanks!
In reference to you PIM Sync issue you did the took the correct action by contacting CRM On Demand customer care and submitting a SR.
-
Custom operation on Oracle Access Server
I'm configuring oracle access system, i must protect some[b] java classes, so i'm going to define a new resource type (java_class type exactly)
I've read on th oracle access system administration guide, that i can define custom operation on new resources. what kind of operation can i define on a java class resource??? the constructor??? the main method?? or some other method??
I will wait for your help...
Thank you..I'm configuring oracle access system, i must protect some[b] java classes, so i'm going to define a new resource type (java_class type exactly)
I've read on th oracle access system administration guide, that i can define custom operation on new resources. what kind of operation can i define on a java class resource??? the constructor??? the main method?? or some other method??
I will wait for your help...
Thank you..
Maybe you are looking for
-
Touch pad scroll does not work in firefox minefeild but works in firefox 3.7
Love Minefeild, but have notice that my touchpad scroll up and down does not work. This function works fine in Firefox 3.7 and other software. I am using the lastest nightly builds. Is there a solution?
-
I set up a Mac mini this weekend using a secondary hdmi connection to my tv to be used as a media center and a central location for home sharing iTunes (etc.). I set the computer and display sleep settings to "never", so as to always be able to con
-
XK01-check double invoice field should be checked by default.
Hi, Is there any way in which I can make the defult value in the "Check Flag for Double Invoices" (Program SAPMF02K & Screen 215) which is in the Vendor creation transaction XK01 always ticked? Thanks Nirupam
-
Hi sir, I have Some Issue during Upadte Assigment in ps 2013. PJClientCallableException: ProjectHasWriteLock vijay
-
How to remove application name label in dock
Anyone know how to disable the app name labels from the docked apps on a mac? I know there's a way to achieve this by fiddling with plist files in the developer options, but i was hoping there was an easier switch to do this. Juts want to turn it off