Oracle Admin Tool Client

Hi ,
I'm facing a lot of problems with Oracle BI admin client Tool that I installed in my Windows 7 to use my cubes ( my Oracle BI server is in a Unix machine ).
The error that I face is *[nQSError : 6001] Connection failed for Remoote Service-JavaHost-AWImportService11G with message [nQSError : 77029] Java Host is not available inside the function AWImportService11G of SAW RPC modules ...*
I'm sure my NSQConfig file is okey, with the server address and port 9810 in Javahost config. And I made sure Javahost sevice is running .
I heard that Oracle BI admin tool Client is a light version of the whole Oracle BI, so there are some missing components ... I thought about unstalling the whole Oracle BI in my windows 7 machine to use my cubes that are in the unix machine.
Do you think it's a good idea ? is there anyone facing the same problem ?
Thax all !
Edited by: 969348 on 23 nov. 2012 05:47

Oh, I mean uninsall Oracle BI Admin Tool Client , and install the whole Oracle Business Intelligence in my Windows 7 32 bits.
Well, the whole story is that :
-I have a Oracle BI system in a remoot unix server.
-I used AWM in my Win7 32 , to create cubes : Now, I need to administrate my cubes to make reports.
-So, I installed Oracle BI Admin tool Client in my Win7 machine : But when I try to create a New repository to get my cubes , I get the nQSError 60001 and 77029 Errors, even If I made the right changes.
-Now, As I'm stuck, I'm thinking about an alternative... I don't know if installing the whole Oracle BI in my Win7 machine is a good alternative ... And if I do so, what type of Installation I need to follow ...
Thanks for your reply

Similar Messages

Download/install the Admin tool(client)

I have installed OBIEE on linux and it is working perfectly fine. However, I do not know where to download the Admin tool(client) to Create/Edit Rpd on my Windows XP machine.
Can anybody please help?

Check this
http://obiee101.blogspot.com/2009/09/obiee-open-linux-hosted-obiee.html
Regards,
Raghu

BI admin tool : Oracle OLAP vs ODBC3.5 OCI 10g/11g ...

Hi everyone,
I'm facing a problem when I try to create a repository using Oracle BI admin Tool.
In the second step of Create new repository , I have to choose between a lot of connexion types : ODBC3.5 , Oracle OLAP, OCI 10g/11g .... I don't know which of them I need to choose in my case.
In my case, I have a cube that I created using AWM, and I need to make a report that is based on that cube.
I don't really know how to proceed ...
I have Oracle BI is in a Unix server , and I installed Oracle BI admin tool client in my Windows 7.
Any idea which connexion type I should use, do I need to make an ODBC connexion for all of them ?
My comprehension of this is unclear ... any help ?
Thx all !!

Starting with OBIEE 11.1.1.5, as it understands Oracle-OLAP metadata in Oracle data dictionary, so to query data from OLAP Analytical workspaces you will always use "Oracle OLAP" as the source in BI-Admin-Tool.
When you will create report in OBIEE, it will then generate the query using the OLAP_TABLE sql function.
Note that automatically generated CUBE_TABLE views in OLAP (the ones suffixed with _VIEW) are not used at all (or even needed) when working with OBIEE 11.1.1.5+.

Version Admin Tool for Oracle BI 11.1.1

I have question about Oracle Admin Tool. I patch system version to Oracle BI 11.1.1.6.10 .
Which version Oracle Admin Tool will be proper for this version OBIEE server.
KG

Hi,
we've tried to synchronize application rooles from Administration Tool, but without any positive results. List of application rooles in EM/bifoundation_domain is different from a list in Administration Tool/Identity Manager/Application Roles. There aren't any errors in bifoundation_domain logs, but in weblogic domain logs we have many erros with the same description:
"Failed to get WLS users.". What could be the reason?
Pzdr.
GO
PS User filter settings affects only 'Users' card: if I set user fileter to "*", I see all users from LDAP provider, but this setting doesn't affect to Application Roles card...
Edited by: 1005521 on 2013-05-13 02:05

Javahost Error : BI Admin Tool : nQSError 60001 and 77029

Hi everyone,
I'm trying to create a new repository using Oracle BI Admin Tool.
Oracle BI server is in a remoot Unix machine, and I installed Oracle BI Admin Tool Client in my windows 7 machine.
At the second step of Create New repository, I choose the connexion type Oracle OLAP, when I click next, I get the message *[nQSError : 6001] Connection failed for Remoote Service-JavaHost-AWImportService11G with message [nQSError : 77029] Java Host is not available inside the function AWImportService11G of SAW RPC modules ...*
I made sure my NQSConfig.INI file on my machine contains the following information JAVAHOST_HOSTNAME_OR_IP_ADDRESSES = "10.x.x.x":9810;
But still, the same error ....
Any clue ??

Check this Doc ID 1330191.1
As per this Solution is:
To resolve access the Oracle OLAP cube from Admin tool when the JavaHost component was started up.
This has already been added to the documentation:
Oracle® Fusion Middleware Metadata Repository Builder's Guide for Oracle Business Intelligence Enterprise Edition
(http://download.oracle.com/docs/cd/E21764_01/bi.1111/e10540/datasource.htm#CACIDAAD)
Setting Up Oracle OLAP Data Sources
Before you import from an Oracle OLAP data source, ensure that the datasource is a standard form Analytic Workspace.
In addition, the JavaHost process must be running to import from Oracle OLAP data sources, for both offline and online imports.
If helps pls mark as correct/helpful

Unable to import metadata using OBI 11g Admin tool

Hello folks,
I am new to OBI. I am trying to build a RPD. For that purpose I am trying to import some tables from database but I am unable to. I created DSN and also tried using OCI but no help. The OBI Admin tool client and database is installed under other user's account. Is that the reason I am unable to import tables?
I am getting this error:
Internal Error-Unable to initialize NLS during driver load - When I try to use ODBC &
Connection failed --When I try to use OCI.
Can someone shed some light on this issue.
Thanks,
Edited by: 950330 on Jan 21, 2013 11:17 AM

Use Call Interface: Default (OCI 10g/11g)
Data source Name->hostname:port/ServiceName or TNS name
like
localhost:1521/XE
make sure you able to ping connect the database using tnsentry or
tnsping <tnsname>
from command prompt.
Let me know for issues if helps pls mark
Edited by: Srini VEERAVALLI on Jan 21, 2013 1:17 PM

Configuration error when open admin tool in BIEE 11g client

Hi All,
I have installed BIEE 11g client in my laptop,the version is 11.1.6.2 ,it has show one error in the installation log :
<action name="Custom Action" target="oracle.bi.CustomIAActionGetInstanceNumber" status="error">
- <AdditionalNotes>
<error>class oracle.bi.CustomIAActionGetInstanceNumber.install() runtime exception:</error>
</AdditionalNotes>
After installation,when I try to open the admin tool in start menu,it show configuration error , but I can open the admin tool through installation directory.
And when I try to import metadata,it also shows connection has failed.
Can any body give some helps on this,thanks a lot.
Ryan.
Edited by: 997662 on Apr 5, 2013 1:39 AM

Hi,
Let me know which version you are using (OBIEE) ?
you are trying to install Client (Admin Tool) and OBIEE server in same machine ?
Thx,

Oracle RAC with Admin tools

Hello!
I use Weblogic Server 10.3.2. I have a portal application and I want to manage the content with Portal Administration Console from admin-tools.war . Admin-tools is a part of my portal application. I eclipse I check for my ear project on Project Facets : Admin Console, Admin Framework, Portal Application Services, Portal Customizations Framework.
I have a cluster with two servers. As a database I use Oracle 10 with two instances : instance 1, instance 2. I have created my domain with wizard and I checked RAC Multidatasources.
All datasources and multidatasources are targeted to my weblogic cluster, also where is deployed my app and Portal Administration Console ( admin-tools.war).
I use the multidatasources :
Multidatasource Name : cgDataSource JNDI:      cgDataSource     Load-Balancing
Oracle Driver for data sources cgDataSource-rac0, cgDataSource-rac1 : oracle.jdbc.xa.client.OracleXADataSource
MultiDataSource Name : cgDataSource-nonXA     JNDI : cgDataSource-nonXA      Load-Balancing     Oracle Driver:
Oracle driver for datasources from multidatasource : oracle.jdbc.OracleDriver . Supports Global Transaction
Name : p13nDataSource
JNDI : p13n.trackingDataSource,p13n.sequencerDataSource,cm.sequencerDataSource,p13n.leasemanager,p13n.dataSyncDataSource,p13n.entitlementsDataSource,p13n.jobManagerDataSource,p13n.quiescenceDataSource,p13n.credentialsDataSource     Load-Balancing
Oracle driver for datasources from multidatasource: oracle.jdbc.OracleDriver .
!!DOESN'T Supports Global Transaction!!
Name: portalDataSource
JNDI : weblogic.jdbc.jts.commercePool contentDataSource contentVersioningDataSource portalFrameworkPool     Load-Balancing
Oracle driver for datasources from multidatasource: oracle.jdbc.OracleDriver .
Supports Global Transaction
Name: portalDataSourceAlwaysXA
JNDI : portalFrameworkPoolAlwaysXA     Load-Balancing
Oracle driver for datasources from multidatasource: oracle.jdbc.xa.client.OracleXADataSource
Name: portalDataSourceNeverXA JNDI: portalFrameworkPoolNeverXA
Oracle driver for datasources from multidatasource: oracle.jdbc.xa.client.OracleXADataSource
But when I try to add a content, after a server restart, I receive the following error :
<Error> <PortalAdminTools> <sun1> <Server-0> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1289472419642> <BEA-415097> <A RepositoryException was thrown: java.sql.BatchUpdateException: ORA-00001: unique constraint (WEBLOGIC_PORTAL_PROD.PK_CM_PROPERTY) violated
com.bea.content.RepositoryException: java.sql.BatchUpdateException: ORA-00001: unique constraint (WEBLOGIC_PORTAL.PK_CM_PROPERTY) violated
     at com.bea.content.internal.server.common.dbaction.Batcher.processWithRetries(Batcher.java:148)
     at com.bea.content.internal.server.common.dbaction.Batcher.processAnyRemainingItems(Batcher.java:86)
     at com.bea.content.repo.internal.server.dao.PropertyDao.insert(PropertyDao.java:383)
     at com.bea.content.repo.internal.server.persister.JDBCNodePersister.createNode(JDBCNodePersister.java:148)
     at com.bea.content.repo.internal.server.logic.NodeOpsLogic.create(NodeOpsLogic.java:227)
     at com.bea.content.repo.internal.server.bean.NodeOpsBean.create(NodeOpsBean.java:106)
     at com.bea.content.repo.internal.server.bean.RepoNodeOps_ehgg7y_ELOImpl.create(RepoNodeOps_ehgg7y_ELOImpl.java:323)
     at com.bea.content.repo.internal.client.common.Node.create(Node.java:123)
     at com.bea.content.spi.internal.NodeOpsImpl.createNode(NodeOpsImpl.java:823)
     at com.bea.content.spi.internal.ExtendedNodeOpsImpl.createNodeWithNodeTypeAndObjectClassAndWorkflow(ExtendedNodeOpsImpl.java:81)
     at com.bea.content.federated.internal.delegate.LatestInterfaceVersionWrapper.invoke(LatestInterfaceVersionWrapper.java:72)
     at $Proxy457.createNodeWithNodeTypeAndObjectClassAndWorkflow(Unknown Source)
     at com.bea.content.federated.internal.filter.logging.NOPSLoggingFilter.createNodeWithNodeTypeAndObjectClassAndWorkflow(NOPSLoggingFilter.java:111)
     at com.bea.content.federated.internal.delegate.NodeLogic.createNodeWithType(NodeLogic.java:275)
Caused By: java.sql.BatchUpdateException: ORA-00001: unique constraint (WEBLOGIC_PORTAL.PK_CM_PROPERTY) violated
     at oracle.jdbc.driver.DatabaseError.throwBatchUpdateException(DatabaseError.java:629)
     at oracle.jdbc.driver.OraclePreparedStatement.executeBatch(OraclePreparedStatement.java:9447)
     at oracle.jdbc.driver.OracleStatementWrapper.executeBatch(OracleStatementWrapper.java:211)
     at weblogic.jdbc.wrapper.PreparedStatement.executeBatch(PreparedStatement.java:191)
What is the problem? Please tell me if you need more details about my configuration and problem.

This issue is beyond simple WLS JDBC. I suggest opening a WLS portal bug.

Tools for Oracle Admin.

Hi Gurus and admins.
I have been lurking here for a while and I think that these groups are wicked cool! I left college ("school" to our American friends!) recently (degree in computer science) and have got a job as a junior oracle developer/dba with a small company near London. The company is "young and dynamic" (i.e. we have to work long hours ;( ), but there are good people here and lots of opportunities to learn. We are allowed choose our own tools for the work we do as long as we use the Subversion server for source control (sql - pl/sql - java - c) and use Bugzilla for reporting. Since these are browser based, this is not a problem and I can use my Linux box (nearly) all the time and the browser of my choice. Sometimes it is necessary to use Windows on client sites - amazingly, they tell us it's for security reasons - go figure! I want a lightweight admin tool that's Open Source (I did lot's of work on open source stuff when in college. Does anybody have any ideas? Mac.

>
Hi Mac, and welcome to the forums,
I have been lurking here for a while and I think that these groups are wicked cool!
I left college ("school" to our American friends!) recently (degree in computer science)
and have got a job as a junior oracle developer/dba with a small company near London.
The company is "young and dynamic" (i.e. we have to work long hours ;( ), but there
are good people here and lots of opportunities to learn. We are allowed choose our
own tools for the work we do as long as we use the Subversion server for source
control (sql - pl/sql - java - c) and use Bugzilla for reporting. Since these are browser
based, this is not a problem and I can use my Linux box (nearly) all the time and the browser of my choice.
Sometimes it is necessary to use Windows on client sites - amazingly, they tell
us it's for security reasons - go figure! I want a lightweight admin tool that's Open
Source (I did lot's of work on open source stuff when in college. Does anybody
have any ideas? Mac.I looked at this at one point.
There are a number of tools out there that are F\LOSS. There's TOra which is
about the best of the Open Source stuff, however, development seems to have
stopped around 2010. There's also http://www.sqltools-plusplus.org:7676/index.html (Windows only)
from Randolph Geist - but it's ceased development also. Its advantage is that it can
be run from a USB stick - but when I tried it recently, it didn't support the DESC table_name
command - I have to say that I was disappointed.
There are a number of SQL*Plus replacements out there - Go [url http://packages.python.org/sqlpython/comparison.html]here to check them out - most seem to
have ceased development - apart from sqlpython and gqlplus.
You mention security. I was on one client site where all we were allowed use was
vi and SQL*Plus. There is a project [url http://code.google.com/p/vorax/]here which seeks to be a
"simple, yet a powerful IDE for Oracle databases" by sort of combining vi with SQL*Plus. Haven't
tried it, but it might be worth a look.
You have to remember however that, while on client site, you may very well be constrained to use
the tools that they tell you to use which will likely be (boring old) SQL*Plus and an editor.
You may be denied the opportunity to use your latest whizz-bang tool and worse still, you may
be stumped if you have to use tools with which you are not familiar.
Download and play all you like with all of the marvellous stuff you can find on the interweb,
but you must be familiar with SQL*Plus.
As for a GUI tool, my recommendation is that you use SQL Developer if you are mostly running
Linux - it also works on Windows. It's a java app, so it's a bit sluggish on machines with <= 2GB
of RAM, but with laptops now at 8GB RAM and rising, that shouldn't be an issue.
Even on Windows, personally I find TOAD to be very cluttered, but if your employer is willing
to pay the (outrageous) licence costs, then I would make an effort to at least become somewhat
familiar with it - it's pretty much a standard - many Oracle job offers mention TOAD.
You have to ask yourself for your career &c., are you more interested in F\LOSS or becoming a
competent Oracle professional.? It's likely that the latter will pay a better salary and, even if
you don't add in the complcation of learning non-standard apps, there's a heck of a lot to learn
with Oracle alone.
Best of luck with your career.
[EDIT sb92075 mentioned Squirrel SQL - I had meant to put it down also. If you want a tool to
connect to all major (and a lot of minor) database servers (it uses JDBC - so if you have a driver
you can connect) and perform ad-hoc queries - then Squirrel SQL is your man. I've used it
for Firebird, MySQL (although Workbench is better), PostgreSQL and even Oracle - it's handy!
HTH,
Paul...
Edited by: Paulie on 26-Jul-2012 01:15

Oracle BI Admin Tool: copying permissions from group to group

Hi!
I'm working with Oracle BI Admin Tool (10.1.3.4).
I have a lot of groups in the repository.
I want to create a seperate group for each department and set filter for each group. For example, group 'Market' should see data only from the Marketing department, group 'HR' should see data only from its department.
The question is the following: if I have 100 groups, do I have to set permissions to each of them manually or is there any mechanism of quick copying (function 'duplicate' is not suitable as groups are already created)?
Thank you,
Natallia

First about filtering data for specific user groups: you need to implement row level security by using session variables.
Here are some links:
http://oraclebizint.wordpress.com/2008/06/30/oracle-bi-ee-1013332-row-level-security-and-row-wise-intialized-session-variables/
http://www.rittmanmead.com/2007/05/13/obiee-and-row-level-security/
http://obieegeek.wordpress.com/2009/04/05/row-level-security-using-initialization-blocks-and-session-variables/
(You can find these links by using google.. ;))
Second about groups and copying privileges/permissions: I don't think it is possible to copy privileges/permissions (other than hardcoding UDML) but it is actually not necessary when you create a security model first. Let me explain: in OBIEE groups can be member of a group, and the underlying group will inherit all the permissions of the group it is member of.
So what you need to do, is to create one group with common permissions and privileges and add all the department groups to this group. If you want, you can then set the specific permissions for each group.

Server Admin Tools 10.4.7 Won't Install on Leopard Client

When you attempt to install Server Admin Tools 10.4.7 on a Leopard client, when you get to the point about Selecting a Destination, you get a red stop-sign with an exclaimation point. When you select that disk, it says:
"You cannot install Server Administration Software on this volume. You are not allowed to install the software on this disk for an unknown reason."
I tried to open the package and manually extract the Server Admin Tools, but they do not run properly. I still cannot add computers to my managed list.
I have two machines, one that still has Server Admin 10.4.7 that was upgraded to Leopard without upgrading Server Admin. I am still having the problem. It seems that Leopard is creating the problem and not the Server Admin program.......
Message was edited by: Ron Yochum

Greetings,
Thanks for posting this I was so frustrated but now because of your post I wont have to go half way across the building with a monitor mouse and keyboard just to add a user.
Thanks so much.
Sincerely,
Jake.

Open and connect in OBI 11.1.1.5 admin tool fowwoling OBE Upgrade

I installed OBI11.1.1.5 on Redhat 5.2 and the admin tool on a windows. In this two machine I have OBI 10 server and admin tool installed as well. The OBI 11 components are all up running as I can access them such as EM and represention service.
Following OBEhttp://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi11115/upgrade/upgrade_to_11g.htm?print=preview#t3 .I upgraded our 10g rpd and catalog and see the repository saved in instance_home, and verified that the default is RPD sh20110903_BI002.
Next step in the OBE, I verify Reposiotory Metadata. I launched the admin tool, opened inline. In the generated dialog box, I entered the password in defined in the update script as Repository Password, and used weblogic login in User/Password. All other fields are blank. That is all I can do in the dialog box, but the Open buttone is always grey. I think at least one available repository should be listed in the list box at the bottom, but it was empty.
Then I tried to create a new repository. In step 2 Select Data Source, I choose ODBC 3.5 and use a valid system DSN, but got Error : The connection has failed.
I tried also use Connection Type OCI 10g/11g. IN the Data Source Name I used a valid netservice name defined in a Oracle client's Oracle_HOME. But still got Error : The connection has failed.
Questions
1) How can make the Open button active in the Open inline RPD dialog box?
2) Why the valid System DSN failed to connect in 11g admin tool. It is OK in 10g admin tool and ODBC configure
3) How to make Admin Too; sees the tnsnames definition. Should I copy the tnsnames.ora file to somewhere under Admin Tool installation directory?
Many thanks.

Thanks. The post appares make sense. I opened my user.sh file and has 2 questions:
1) There are 32bit section and 64 bit section, and it states that 32 bit server must work with 32 bit client, so is for 64 bit. In my case, the clients are most likely 32 bit windows (browsers and admin tool), but the server is installed on Redhat 64 bit. Is this a problem? How do I know if my OBIEE iis running 64 or 32 bit?
2) All entries in the user.sh file are commented out. Then what file is used to in the current OBI11, it is started automatically after the installation.

Admin tool could not load the essbase driver.Please check the configuration

Hi All,
I have obiee11g installed machine and want to connect that machine with essbase.
For that I have installed Essbase Client [11.1.2.1] by downloading the following files,
*1>Oracle Hyperion Enterprise Performance Management System Installer Fusion Edition Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
*2>Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.0 for Microsoft Windows (32-bit) Part 1 of 4*
*3>Oracle Essbase Clients Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
After that I manually added the ESSBASEPATH and ARBORPATH as Environment Variables (USER).
And also I manually added the essbasepath in bi-init.cmd file.
Finally I tried to connect essbase with BI through BI Admin Tool, I get the following Error
"*Admin tool could not load the essbase driver.Please check the configuration*."
kindly guide me to overcome this issue.
Thanks and Regards
sai
Edited by: 923924 on Apr 24, 2012 5:20 AM

Until you perform the configuration on the AD server, the following message will appear:
Error: Could not start the SSO service. Please check the configuration.
So configure the AD server so that the error message will not appear again.

Tns problem with Oracle 11g ODAC 11.1.0.6.21 with Oracle Developer Tools

I installed the full
Oracle 11g ODAC 11.1.0.6.21 with Oracle Developer Tools for Visual Studio
now I am at the good old "[ORA-12154: TNS:could not resolve the connect identifier specified]" error.
I copied the same tnsnames.ora as used on the db server
onto the client "C:\Oracle\product\11.1.0\client_2\Network\Admin".
The host name is right since a normal ping works. TNSping is not available.
but I get the [ORA-12154: TNS:could not resolve the connect identifier specified] error.
The listener is running and the instance as well since it all works on the source server.
I tried it with
SET path=c:\oracle\product\11.1.0\client_2\bin
but tnsping is still not recognized.
sqlplus works on the other hand when I set it to
SET path=c:\oracle\product\11.1.0\client_2\
what is going on...

hey
u can post your query here, and i think everyone here is to share opinion so do not hesitate to do so and please try to google before posting here,
and we know no one is expert like some people saying 'boring questions' you just try to overcome your problem and you will definitly get your problem solved .
some mpeople ar still there who answeres hopeless questions and say nothing about them but when a fresher askin a qustion is not tolarated by them they think everyone is born DBA here
they always tend to discouraging people here on forums,and i think they are vvolunteers to reduce crowd here on forums, inspite of there experience and people respect them they can not control their anger
so please post you tns here, i think there are ways to ask people to google and search docs first, but not like this
thanks and regards
VD
Edited by: vikrant dixit on Jun 29, 2009 4:33 AM

Help needed in installing bi linux - Admin tool

Hello,
I downloaded the OBIEE latest version from oracle site for linux.
Then I downlaoded the Client tool for OBIEE 11.1.1.1.5 and installed in windows now its asking for configuring the DSN
While confidguring its asking me the server and then BI server un and pwd i gave the DEV_BIPLATFORM and the pwd and the port
But showing me errors like could not connect to that port in the server machine and timeout.2 erros its showing me.
nQSError ->12017
nQSError ->12008
In the same windows machine i have previously installed OBIEE 11.1.3 and i used OCI 10/11g so there was no configuration of DSN there for the admin tool.
I hope there is no issue with this OBIEE 11.1.3 installed.
Since i had already installed bi i have 2 oracle bi server option while adding a new DSN
one is Oracle BI Server1
and other is Oracle Bi Server 11g_123344
I selected the second one to create the system dsn for the client tool for the linux one.
Could anyone pls tell the steps which i need to follow.
What i need to do to overcome those errors and then After configuration what need to be done.
I am bit confused on all these.
Is this like everytime we create a rpd we need to manually copy the rpd to the linux machine.
and then restart the services.
because since i installed bi in linux machine i am able to acces the Bi and i can see the default dashboard and can play with it.
Please help.
Thanks

Hi,
I suppose you need too change the port to 9703 or 9810.Configure the DSN properly to the correct server.
What i need to do to overcome those errors and then After configuration what need to be doneAfter configuring you need to open your repository in online mode to work on it.
Is this like everytime we create a rpd we need to manually copy the rpd to the linux machine.
and then restart the servicesYes you need to move the RPD if changes dont to the linux server i.e. you can copy and paste it and start the services.
UPDATED POST
Now a repository should be stored in linux machine BI folder
or should be in Client machine repository folder
Since we need to upload the rpd file first time to the bi server from the em i feel it should be client machine.You work on admin tool of windows and then the repository is moved to linux machine BI folder so as the users using it would access the linux presentation services so they can see what is in the latest RPD.You can move files by PUTTY tool by executing linux commands
Installation :- http://onlineappsdba.com/index.php/2008/08/26/obiee-step-by-step-installation/
Unix installation(Urgent)
UPDATED POST-2
Check the links http://gerardnico.com/wiki/dat/obiee/installation_11.1#on_linux
http://wentari.blogspot.com/2010/08/obiee-11g-installation-on-linux.html
Cheers,
KK
Edited by: Kranthi.K on Jun 17, 2011 1:19 AM

Oracle Admin Tool Client

Similar Messages

Maybe you are looking for