Oracle Alert with Workflow Mailer

Hi,
In order to check Alerts with Workflow Mailer, in TEST environment (Cloned from PROD Instance) , we need to setup Workflow Mailer.
Question : How to setup Workflow Mailer in TEST environment , in order that no mails will be sent to customers ...
Thank's

In order to check Alerts with Workflow Mailer, in TEST environment (Cloned from PROD Instance) , we need to setup Workflow Mailer.This is correct if you are on 11i (ATG RUP4 or above) or R12
Question : How to setup Workflow Mailer in TEST environment , in order that no mails will be sent to customers ...disable workflow for all users
Re: disable workflow for all users
Set WorkFlow Override Address After Clone Using SQL
Set WorkFlow Override Address After Clone Using SQL
Thanks,
Hussein

Similar Messages

Oracle Files with Workflow in OCS release 2

I am trying to configure email notification in the Workflow that comes with OCS release 2. Refering to Oracle Files Admin Guide, page 7-10, it says that I should conifgure sendmail to be used. I want to use OCS mail. Can this be done?
In fact, I need this to be done this way cos SendMail is turned off. My mid tier, calendar, Files, Mail, is sitted on a single server.

Files R2 integrates with Workflow 2.6.2. I believe Workflow 2.6.2 on UNIX requires Sendmail to be configured, but they support other mailers through UNIX gateways. Please refer to the Oracle Workflow Guide for more details.

Config Oracle Alert to send mail

Hi everyone !
I want to setup Event Alert to send mail use Unix sendmail in our project.
My Apps is 9.5.10.2 CU2, i have never applied to Rollup4.( Rollup 4 send mail with WF)
If i want system to sent a message from [email protected] to [email protected], i configed sendmail package successfull. What do i do next step ?
Further, In Page 9.3 of Oracle Alert User's Guide, at Setp 2, How to create Mail System Administrator?
Regard !
Edited by: whoami! on Nov 20, 2009 6:19 PM

I config Alert on other table and see issue following: in only Alert but when 8 row updated then create 8 requests, and auto perform 8 actions to sends 8 same mail.But i want only system to send 1 mail .
Can you help me !
Detail:
When I create 1 PO,i want system to send 1 mail to superior to approval, i use SQL:
=====================
select
created_by,
last_updated_by,
rowid,
authorization_status,
LAST_UPDATE_LOGIN,
approved_flag,
wf_item_type,
wf_item_key,
xml_flag,
submit_date
into
&cby,
&last_updated_by,
&rowid,
&auth_status,
&LAST_UPDATE_LOGIN,
&approved_flag,
&wf_item_type,
&wf_item_key,
&xml_flag,
&submit_date
from po_headers_all
where
(last_updated_by=1147
and created_by=1147
and upper(authorization_status)='IN PROCESS'
and LAST_UPDATE_LOGIN = -1
and approved_flag is not null
and wf_item_type is not null
and wf_item_key is not null
and xml_flag is not null
and submit_date is not null
and rowid=:rowid)
===================
Thanks for advance !

How to set up Oracle Alerts using Lotus mail

Hi there
Anyone there knows how to set up Oracle Alerts using Lotus mail

Hi All. We are looking to install 64-bit Oracle 11g
on 64-bit SUSE Linux Version 10 SP1. We would like to
start up with a 16GB SGA and possibly increase to 50GB. How you calculate you need to start database with 16 GB SGA , and latter need to increase it to 50 GB ?
Can anyone help us with a list of rpms and
kernel settings we would need to get started? ThanksCheck following link for rmp and kernel parameters
http://download.oracle.com/docs/cd/B19306_01/install.102/b15667/pre_install.htm#sthref85
- Virag Sharma
http://virag.sharma.googlepages.com
http://viragsharma.blogspot.com

Mails are not received through Oracle Alert

Hi ,
User is not getting the mails after submitting the alert through concurrent request but concurrent is getting completed normal.
Regards,
Kavitha

Hi Kavitha;
Is there any error message?
You need to investigate your issue. Please see also below note which some are posted by Sandeep
Oracle Alert Documentation Resources, Release 12 [ID 396315.1]
How to determine what email system is being utilized for Oracle Alert processing [ID 428193.1]
Configuring the Oracle Workflow 2.6 Java-based Notification Mailer with Oracle Applications 11i [ID 231286.1]
Subject: How to setup Email Notification from Microsoft Exchange with Oracle Alerts [ID 163249.1]
HOW TO CONFIGURE ORACLE*MAIL FOR USE WITH ORACLE ALERT [IDD 1005013.6 ]
Using Oracle Alert with Workflow Mailer [ID: 395128.1]
Which electronic mail facilities does Alert use/support? [ID: 211840.1 ]
FAQ: Using Oracle Alert to Send MAPI Mail on Windows NT [ID: 75011.1 ]
How to setup Email Notification from Microsoft Exchange with Oracle Alerts [ID: 163249.1 ]
How to Configure Concurrent Request Output Option to be Notified by Email .[ID 456925.1]
Concurrent Request Email Notification is Not Sending Email [ID 382766.1]
Regard
Helios

How to configure oracle alerts to use Workflow mailer?

Hello Guys:
We were trying to setup oracle alerts using workflow mailer. I have created a dedicated mailer for handling oracle alerts related mail.
Here is what I need to clarify:
1. Having setup a new mailer for Oracle alert do I have to still configure the Options in Oracle Alerts. This is where you choose which type of mail u want to use ( like Unix mail,Windows NT mail )
2.How do I tell oracle alert to use the new mailer that I created exclusively for this? While creating the mailer at some point I remember putting ALR in configuration form.
I am on 11.5.10 CU2. I am on 11i.ATG_PF.H
Regards,
Bala

Hi Hussain:
Based on the note I realised that my oracle alerts will user unix sendmail. But then If u go to " Oracle Alert Options "
-- > Mail systems -- I check Unix send mail
-- > Mail server options ( Do I have to fill this section? )
My guess is that the send mail will post the email to a IMAP account ( I created oraclealert account ) and IMAP account will push the alert email to Recipient
Mail Database/Server Name --- imap.mydomain.com
Mail Priority --- Normal
Accounts
Application Installation username Password
Blank ** Blank ** oraclealert pwd
Blank ** Blank ** oraclealert pwd
** - It wont allow me to choose an application.
Is there a simple test to make sure that my oracle alert is working or not? I appreciate your help.
Regards,
Bala

Oracle alert not working in 11i but working on R12 on same server

Hi Friends,
I have an R12(R12.1.1) Instance and I configured Oracle Alert with the following details
Mail systems : Windows NT Mail
Mail Database/Server Name: server1
Send Mail Account/password : wf/wf
Response Mail Account/password: wf/wf
Enable Response Processing:no
Workflow mailer is working and I tested a sample Oracle Alert and it works fine.I received mail also.
I also have a 11i (11.5.10.2) instance on the same server and i configured the alert options exactly as i did for R12 and the workflow mailer is also running but the alert is throwing error:
APP-ALR-04124: Oracle Alert was unable to deliver your message
To <mail id>
Apps Version : 11.5.10.2(Default Installation,No patches applied)
Server OS : Red Hat Linux ES 4.4
Mail server : Exchange 5.5 on windows
Both the instances are on the same server.
what is the change needs to be done on 11i compared with R12(R12.1.1)which is working fine.
Please let me know.
Regards,
DB

Pl run the 11i Diagnostics Test outlined in MOS Doc 271367.1 (11i : Oracle Alert Alert Check Setup Test)
HTH
Srini

Oracle Alert Configuration in 11i

Hi Hussein:
I am trying to configure oracle alerts for my application ( Test ) following article
How To Check Oracle Alert Setup? [ID 577392.1]
But when I run the query in the third step , I am not getting the two rows that is expected.
3) Login into SQL*Plus as the 'APPS' user and run the following SQL.
select object_name, status from user_objects
where object_type = 'TRIGGER'
and object_name like 'ALR_FND_PROFILE_OPTIONS%';
Do I have to run any scripts to get this triggers created? I am kind of last.
I went through the whole document and changed a user profile so I can check if the alerts is working. Nothing came out , Not an email or even a printout.
Regards,
Bala

Hi Bala,
Please run the test in (Note: 271367.1 - Oracle Alert Alert Check Setup Test) and see if it returns any error/warning messages.
If you are on 11i and you have RUP4 patch installed (or above), then you need to consider having Workflow configured.
Please see these documents/threads for details.
Note: 422782.1 - Changes Introduced in Alerts Post RUP4 and its Impact
Note: 428193.1 - How to determine what email system is being utilized for Oracle Alert processing?
Oracle Alert and WF mailer
Oracle Alert and WF mailer
Regards,
Hussein

Workflow mail shows junk character in outlook where arabic

Hi all
We have EBS R12 12.0.4. I am facing the problem with workflow mails.
whenever the workflow mails comes in outlook it show junk characters instead of arabic letters.
regards
Musaddaq

I have done following steps but no changes have the same issue.
1. Navigate to OAM->Workflow Manager->Notification Mailer->View details in this page
2. Look for parameter called RESET_NLS change this value from 'YES' to 'NO'.
3. Bounce Notification Mailer.
Regards
Musaddak.

Oracle alerts and microsoft exchange server

Hi,
We are working on Oracle Applications 11i (fail over on 2 servers) which is installed on Solaris 64 bit .
AND I am trying to configure Oracle Alerts with Microsoft Exchange Server.
I am following the note: Oracle Applications And Microsoft Exchange Server-Interoperability Guide.
At the step of configuring the exchange Server I need to know the account used to run the Concurrent Manager service.
How can i check that?
Thanks.

Hi,
At the step of configuring the exchange Server I need to know the account used to run the Concurrent Manager service.
How can i check that?Most probably it is applmgr user.
To verify, issue "cd $COMMON_TOP/admin/scripts/<CONTEXT_NAME>", then "ls -l adcmctl.sh". This should should the OS owner of the script (the OS user which is used to start the CM). Or, you could check the value of the "s_appsuser" context variable in the application context file to determine the user.
Regards,
Hussein

How to configure Workflow Notification Mailer for oracle alert in R12

Hi all....,
How to configure Workflow Notfication mailer for oracle Alert in R12. Please provide the complete steps.. Its urgent.. Plz help me..
Regards ,
Madhan

Duplicate thread (please post only once)
plz help me...!!!! Workflow Notification Mailer
plz help me...!!!! Workflow Notification Mailer

OAM alerts setup for Concurrent services down using workflow mailer

Hi,
We have ORacle Ebiz 12.0.6 with 10.2.0.4 database.
Can some one please provide details how to end notification email for Concurrent services down using OAM in R12 with workflow.
I have done the setup in clone with workflow up and running... and have also setup the alerts for example say:
Service manager ---Down,Up in OAM through sysadmin user but when i bring down the Service manager form
Concurrent manager administer form ...No email notifications are fired.
Please share knowledge on this issue...
Help is appreciated
Regards,
Milan

Can some one please provide details how to end notification email for Concurrent services down using OAM in R12 with workflow.
I have done the setup in clone with workflow up and running... and have also setup the alerts for example say:
Service manager ---Down,Up in OAM through sysadmin user but when i bring down the Service manager form
Concurrent manager administer form ...No email notifications are fired.Have you verified your Workflow setup before trying to troubleshoot the alert issue about the CM?
How to Perform a Meaningful SMTP Telnet Test to Troubleshoot Java Mailer For Sending Email Notifications [ID 753845.1]
Example Of Configuring Workflow Java Notification Mailer With Oracle Applications [ID 249957.1]
Oracle Workflow Release 12 Diagnostics [ID 469822.1]
Oracle Workflow ATG Support: R12 Java Mailer Setup Diagnostic Test [ID 748421.]
Thanks,
Hussein

Alert management with custom mail subject

Hello,
I defined a business process, with a control step that throws an alert with a specific message "Error in &MessageTypeFound& " ( &MessageTypeFound& being a container element filled in in a previous step ).
When I look at the e-mail that the alert manager sent, I can see the alert, with the variable properly filled in, so the result in the mail-body is: "Error in WMMBXY".
Now, as a mail subject, I want the same message. In the Alert Category Definitions, I need to fill in the title and this will be used as mail subject.
To be able to use variables in this title, I need to define container elements in the alert category definition. How can I pass the Business Process variable ( &MessageTypeFound& ) to this container for the alert definition ? (So I can use this container element for my dynamic variable in the subject of the alert mail)
Any ideas are welcome !
Thanks

Hi Frederik,
Unfortunately the functionality you want is simply not available ... or well it is but its not implemented very good by SAP.
The workflow step that generates an alert does has a container element 'SHORTTEXT' which can hold placeholders and which is translated into the title of the alert message/mail.
However, the field is defaulted with the text 'Process &_WORKITEM.WORKITEMID&' when being executed via BPM ...
I tried to overwrite it by setting my own 'SHORTTEXT'container element within the BPM but that does not work ...
Regards,
Steven
( Tried everything on SP14 ... maybe something changed in SP15 ... )

How send attachments to mail using oracle alerts

Hi All,
I am working on Oracle Alerts in oracle applications. how to send attachment to mail.
Thanks in Advance,
Reddy.
Edited by: user9540785 on Mar 22, 2009 4:48 AM

As a workaround, you can kick start a custom workflow in actions rather than sending mail. In that custom workflow you can send attachments as part of the notification to the respective recipients.
Thanks
Nagamohan

Oracle Applications Manager -- Workflow Manager -- Notification Mailer

Hi All,
We are facing an issue in the R12 E- Business Suite Po Approval Workflow cycle. The PO is being approved and
the buyer while approving the PO is mentioning the email address where the Po Approval Notification needs to be emailed.
The Po gets approved and in thw wf_notifications table we could see two records entered with the Message Type as mentioned below :
Message Type : PO_PO_HAS_BEEN_APPROVE , status : OPEN and mail_status : SENT , Recipient Role : DCASTAGNA
-- This is fine because the user DCASTAGNA , is receiving the email at the email address which is linked to the
fnd_user record in Oracle. This is an FYI notification which just says The PO has been approved
Message Type : PO_EMAIL_PO , status : OPEN and mail_status : FAILED, Recipient Role : [email protected] -- Why this status is showing as Failed.. The user is not receiving this email notification.
The issue is that the user whose email address has been keyed is not receiving the email notification.
We have the Workflow Notification Mailer configured which would listen to the Send Notification Message posted by the Workflow Engine.
Could someone please help with this issue after we have upgraded to R12. The user is receiving 1 email notifiaction but not receiving the email for the 2nd Message present in the wf_notifications table.
We are stuck because of this issue.
Thanks
sachin.

Hi sachin;
Any errors in the workflow mailer log file?
Any errors in the database log file?
Did you try to bounce the workflow services?
Please check below and see its helpful for your issue:
How to Resend Workflow e-mail Notifications Correctly Sent [ID 942267.1]
How To Resend Notifications That Failed [ID 784040.1]
Please also check Hussein Sawwan's greatest previous post about simalar thread:
Workflow notification Mailer Not sending notifitions in R12
Regard
Helios

Oracle Alert with Workflow Mailer

Similar Messages

Maybe you are looking for