Oracle APEX and Windows 2008 64 Bit

Hi
We are using Oracle APEX 3.1 version and Oracle 10G HTTP Server is running on a system which is Windows 2003 32 Bit.
We are planning server Virtualization and for that i would like to know whether Oracle APEX 3.1 version is compatible with Windows 2008 64 Bit or not?
Any kind of help is appreciated.
Thanks,
Lakshmi

Hi,
Thanks for your reply.
Actually my question supposed to be whether Oracle 10G http server that we are using for APEX 3.1 version is compatible with Windows 2008 64 Bit?
If we change to Windows 2008 64 Bit do i need to install Oracle 11g http server?
Advance thanks for your help.
Lakshmi

Similar Messages

Oracle 10g and Windows 2008

I'm trying to install Oracle 10g x86 on Windows 2008 x64. Installation crashes in the beginning with the next error message:
Abnormal program termination. An internal error has occurred. Please provide the following files to Oracle Support:
"Unknown"
"Unknown"
"Unknown"
Any objections?

What do you mean when you say "I'm trying to install Oracle 10g x86 on Windows 2008 x64" You are trying to install an x86 Oracle edition on a 64 bit OS. This is not certified yet. In fact if you take a look at the certify matrix you will find that the 64 bit platform is not certified yet, but it is planned for this year.
The only available edition so far for Win2008 is x86. Patience is advisable.
~ Madrid
http://hrivera99.blogspot.com

Oracle Express and Windows 2008 Server

I successfully installed the Oracle Database 10g Express Edition on our new Windows 2008 Server. However, after install I can not open the Database Home Page in IE 7.0? The problem description I get when I click on the Diagnose Connection is "127.0.0.1" is not set up to establish a connection on port "8080" on this computer.
The server is also a domain controller, DNS server and DHCP server.
Is this version compatible with Windows 2008 Server?
Is it a DNS problem or may be a security problem?
Heinrich

I have not tried it on Windows 2008. But the challenges with your configuration could be endless. Here are some common issues:
1) XE must be installed by a local machine administrator, not a domain administrator
2) XE requires several ports (1521, 8080)
3) Firewalls and antivirus are known to crash the install
4) Often 3) will block the installation of the database
Note that XE does not use any form of HTTP listener - the database listener does the bassic work and passes HTTP requests into the database. So no Apache or IIS requires with XE.

Install Oracle 10g on windows 2008 Server 64bit

Is it possible to install Oracle 10g on Windows 2008 64bit . I read one post below it says , windows 2008 is not certified for oracle 10g ..
windows server 2008 Oracle 10G 64 bit
before I installed 32bit , it is throwing error message on alert log file on every 5 seconds.
"OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. ! "
if it is possible which version I want to download is best ..
and what is the recommendation whether it is 10g or 11g

You mean to say Oracle 10g 64bit will not work in Windows 2008..?No, i meaned the post you linked was written in year 2008, in that year it's was a unsupported platform for that oracle version. Actually its supported and you can install it.
Furthermore like Aman told you, It's more recommended install 11gR2 version
Edited by: Fran on 29-may-2012 4:20

Error: SAP installation of ERP Sr3 with ORACLE 10g on Windows 2008 server

Dear all,
while installaing SAP ERP SR3 with ORACLE 10g on windows 2008 server...
we are getting error as not support.
please confirm wether this version of OS is uspported or not.
thanking you in all,
by
Animesh

actualy we tried to change Oraparam.ini file in the installation folder...
edited ... windows= 5.0, 5.1, 6.0
we had entered 6.0
Yes - that is necessary.
and started ... but after starting we are getting ERROR like unKNOWN and installation popup (OUI popup) exiting with .. error popup.
Yes - because Oracle delivers its own Java version - which is too old to run on Windows 2008.
if you suggest us to use 2003 64 bit for temporaray .... purpose.
and is there any specified procedure to UPgrade OS.
like... DB should be updated before OS upgradation.
You can run 10.2.0.4 on Windows 2003 x64 nicely and upgrade to Windows 2008. Since there is no "upgrade" (it is the highest version supported) there´s no need to do anything.
The question you have to ask is:
Why do you need Windows 2008? Is there any technical implication?
Markus

Install Oracle 11gr2 on Windows 2008 R2 with ASM step by step Guide needed

Hi,
I am looking for a step by step guide on installing Oracle 11gr2 on Windows 2008 R2 with ASM etc. This is not a RAC environment since ASM architecture is a bit different in 11gR2, I would appreciate if anyone can point me to a guide to follow or provide a one.
Thanks in advance.
Sujith

Hi Sujith;
I am looking for a step by step guide on installing Oracle 11gr2 on Windows 2008 R2 with ASM etc. This is not a RAC environment since ASM architecture is a bit different in 11gR2, I would appreciate if anyone can point me to a guide to follow or provide a one.You need to install grid first(Software only) its neccessary for ASM, Than you need to use asmca to create asm disks than you need to install 11gr2
All doc avaliable at:
http://www.oracle.com/pls/db112/homepage
Regard
Helios

How to install oracle 9i on windows 2008

hi,
i am using oracle forms & reports 9i server now i want to shift it on a windows 2008 machine so is it possible if yes then how ? bcoz of some reason i cant have new version.i dont have metalink.
regards

superdba wrote:
hi,
i am using oracle forms & reports 9i server now i want to shift it on a windows 2008 machine so is it possible if yes then how ? bcoz of some reason i cant have new version.i dont have metalink.
regardsHi,
You might find some interesting things in this thread
Oracle 9i Release 2 Windows OS support
But the bottom line is that 9i is desupported, and Windows 2008 is not certified for 9i.
Brgds
Johan

Can't install oracle 10g on windows 2008 R2

Please help me
I want install oracle 10g on windows 2008 R2 but can't install because I don't have file install oracle_10.2.0.4 and i can't download file from oracle.com
and oracle 11g i not license
Where can download file oracle install 10.2.0.4
thank you

user9357585 wrote:
same issue here. I need 10.2.0.3.0 with install software to bring a legacy sid over onto new server hardware that will not support Win 2003. I have Win 2008 32bit loaded and just need the software install ruitine to make the move. My legacy 10g server running on older hardware and Win 2003 works, but is now uncompliant with IA requirements now. We are sandboxing this application. My new server will need to have 2008 on it.
Will Oracle supply me the software. I have paid maintenace on my account every year. Just paid it for this year in Ocober. Should not have an issue here.submit a Service Request & you'll get your question answered

How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server.

How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server With Oracle 11g R2.
How many database will play in this role.
Best,

hello
I was going through your post and i am also doing the same thing here at our organisation for Oracle 10g R2
Can you pls send me any docs u r having for configuration of Oracle in windows clusters .
And, can you pls elaborate on this point
e)Create Oracle Service with the same name in the 2nd node and copy all the files like spfile,tnsnames.ora,listener.ora,password file to Node2.
Pls send me the details at [email protected] or you can contact me at 08054641476.
Thanks in advance.

Oracle 11GR2 on windows 2008 Geo-Dispersed cluster

Hi all,
anyone can guide me about the installing oracle 11GR2 on windows 2008 Geo-dispersed cluster environment? Please guide and provide documentation if possible,
thanks

By "geo-dispersed", do you mean a cluster with servers is physically remote locations ? If so, the install process does not care about how far apart the servers are physically. Follow the standard install doc at http://download.oracle.com/docs/cd/E11882_01/install.112/e16773/toc.htm
Srini

External table in Oracle 10g and Windows server 2003 problem

I'm having a problem accessing an external table in an Oracle 10g and Windows 2003 server environment. The disk is remote (mapped) to the server. It's the usual access errors, kup-04001 or kup-04063.
I have the [seemingly] exact same setup in an Oracle 9i and Windows 2000 server environment which works perfectly. Services run as local SYSTEM and SYSTEM has full permissions on the disk. Directories exist and so do the permissions to the directories.
In the Oracle 10g and Windows 2003 environment, services run as local SYSTEM and SYSTEM has full permissions on the mapped disk. Directories exist and so do the permissions to the directories.
This obviously effects mappings, deployments, etc.
Does anyone know if something changed in either the db or the os?
Thank you,
Michael

Thank you for your reply.
Your proposal is the standard solution. As a matter of fact, that's how it is on my "old" system. Server "A" Oracle services are started by SYSTEM. Server "B" Oracle services are started by SYSTEM and is where the flat files reside. SYSTEM has full permissions on a disk local to Server "B". Database directoriies defined on Server "A" point to Server "B" remote disk. External Tables on Server "A" are defined with directories that point to Server "B" remote (mapped) disk. I have no problems with this configuration.
I'm having a problem acheiving the same configuration with Oracle 10g and Windows 2003. I guess I'm baffled over the fact it isn't working the same way as my "old" environment. Why shouldn't it? Oracle (and you) want me to start services as a specific user. It shouldn't have to be that way unless something changed in the way the database makes calls to the os or if Microsoft slipped something in with one of it's numerous security patches.

External table in Oracle 10g and Windows server 2003

I'm having a problem accessing an external table in an Oracle 10g and Windows 2003 server environment. The disk is remote (mapped) to the server. It's the usual access errors, kup-04001 or kup-04063.
I have the [seemingly] exact same setup in an Oracle 9i and Windows 2000 server environment which works perfectly. Services run as local SYSTEM and SYSTEM has full permissions on the disk. Directories exist and so do the permissions to the directories.
In the Oracle 10g and Windows 2003 environment, services run as local SYSTEM and SYSTEM has full permissions on the mapped disk. Directories exist and so do the permissions to the directories.
Does anyone know if something changed in either the db or the os?
Thank you,
Michael

Version 9.2.04.
Server "A" Oracle services are started by SYSTEM. Server "B" Oracle services are started by SYSTEM and is where the flat files reside. SYSTEM has full permissions on a disk local to Server "B". Database directoriies defined on Server "A" point to Server "B" remote disk. External Tables on Server "A" are defined with directories that point to Server "B" remote (mapped) disk. I have no problems with this configuration.
I'm having a problem acheiving the same configuration with Oracle 10g and Windows 2003. I guess I'm baffled over the fact it isn't working the same way as my "old" environment. Why shouldn't it? Oracle (and you) want me to start services as a specific user. It shouldn't have to be that way unless something changed in the way the database makes calls to the os or if Microsoft slipped something in with one of it's numerous security patches.

Oracle apex and extjs grid table

hi
im new to extjs and i was wondering if someone can help me with this;
i want to create a report in oracle apex and put the output in extjs grid table
for example i want to view the output of select * from all_objects in grid table
thnx in advance

Okay
To get you started...
Create a new report template with named rows.
In row 1 template put this
["#1#","#2#","#3#","#4#","#5#","#6#","#7#","#8#"]Assuming you have 8 rows say... and make it conditional based on a PL/SQL Expression like this
#ROWNUM# = 1Then row 2 template like this
,["#1#","#2#","#3#","#4#","#5#","#6#","#7#","#8#"]Conditional on
#ROWNUM# > 1Then in before row put this
<script type="text/javascript">
Ext.onReady(function(){
var munkyData = [And after rows something like this (based on the emp table)
var store = new Ext.data.SimpleStore({
      fields: [
               {name: 'empno', mapping: '0'},
               {name: 'ename', mapping: '1'},
               {name: 'job', mapping: '2'},
               {name: 'mgr', mapping: '3'},
               {name: 'hiredate', mapping: '4'},
               {name: 'sal', mapping: '5'},
               {name: 'comm', mapping: '6'},
               {name: 'deptno', mapping: '7'}
store.loadData(munkyData);
var grid = new Ext.grid.GridPanel({
       store: store,
       columns: [
                 {id:'empno',header: "Employee",sortable:true, width:100,dataIndex:'empno'},
                 {header: "Name", sortable:true,width:75, dataIndex:'ename'},
                 {header: "Job", sortable:true, dataIndex:'job'},
                 {header: "Manager", sortable:true,width:75, dataIndex:'mgr'},
                 {header: "Hire Date", sortable:true,dataIndex:'hiredate'},
                 {header: "Salary", sortable:true,width:50,dataIndex:'sal'},
                 {header: "Commission", sortable:true,dataIndex:'comm'},
                 {header: "Department", dataIndex:'deptno'}
       stripeRows: true,
       width:700,
       autoHeight:true,
       title:'Array Grid',
       renderTo: 'munkyDiv'
</script>Then create a region to hold it with a source of
<div id="munkyDiv>
</div>
{code}
This is pretty basic but it should get you going...
Cheers
Ben
http://www.munkyben.wordpress.com
+Don't forget to mark replies helpful or correct+ ;)

ACS Se 4.2.1.15 patch 4 and Windows 2008 R2

Hi, Can anyone advise whether ACS Se and Remote Agent 4.2.1.15.4 supports Windows 2008 R2 please. Thank you.

Hi,
ACS 4.2.1.15 does not support windows 2008 R2.
ACS 5.2 supports the same.
It is a bug CSCtg12399 which is resolved on ACS 5.2.
The release notes of ACS 5.2 describing the same.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.2/release/notes/acs_52_rn.html
The following link gives details of the ACS 4.2 and Windows 2008 compatibility.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/release/notes/ACS42_RN.html#wp100949
Hope this helps.
Regards,
Anisha
P.S.: please mark this thread as answered if you feel your query is answered. Do rate helpful posts.

SAP Conversion Agent for PI 7.1 EHP 1 and Windows 2008 Support

Hello
I have read that some people were able to run SAP Conversion Agent on a PI 7.1 EHP1 Installation on Windows 2008 Sever. But in the Product Availability Matrix there is no support for 2008 yet.
In the SAP Library (http://help.sap.com/saphelp_nwpi71/helpdata/en/43/fc39c16bfb025ee10000000a1553f7/frameset.htm) under the release notes for SAP Conversion Agent there is still version 8.5, but when I install the actual Support Package I have Conversion Agent 8.6 running and according to information on the informatica.com site this version is running under 2008!
Has anybody clear and actual information about which OS the newest SAP Conversion Agent for PI 7.1 EHP1 supports? Or has anyone experiance on Conversion Agent and Windows 2008 Server?
Thanks
Christoph

Hi Mark
Thanks for your reply! Fact is that in the actual Package (SP06) the version of Conversion Agent Engine supplied is not 8.5.5 as in the SAP Note mentioned, it is version 8.6.0:
C:\Documents and Settings\pi1adm>CM_console -v
Engine-Version: 8.6.0(Build:30)
Engine-Syntaxversion:4.00.10
I will oben a ticket for that ...
Regards
Christoph

Oracle APEX and Windows 2008 64 Bit

Similar Messages

Maybe you are looking for