Oracle application having problem on PIX to ASA L2L tunnel.

Hi ALL,
My customer has performed a PIX migration to ASA5520 on last weekend. And the configuration on the new ASA5520 is almost the same as the original PIX515. There are several L2L vpn tunnel configuration on the ASA5520. After the migration, all VPN tunnel can establish without problem. But my customer found that their Oracle application running on one of the VPN tunnel has connectivity issue. This application did not have problem when in the original environment.
This VPN tunnel is a L2L tunnel between remote and main office. In remote office, the VPN endpoint is a PIX515E w/ OS 7.0(5). In main office is an ASA5520 with 7.2(2). The original firewall in main office is a PIX 515 w/ 7.0(5). The IPSec match address list is an IP network to IP network access list without port definition.
We found that the Oracle client on remote office can connect to the port opened on the Oracle server on main office. But after connected to the port on the server, the application will re-establish a new connection using random port between this client and server, and this new connection seems to not able to establish.
Anyone can tell me that is it possible to impact the Oracle application on this IPSec tunnel? The ACL is an IP to IP acl. What can I do to troubleshoot this issue? Why the issue rise on the new ASA implementation?
I'm looking forward to your reply! Please help!
Jason

Hi,
Here is the end to end troubleshooting steps for L2L tunnel.
Please check debug commands carefully you will get your key point where is troubble.
http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a00807e0aca.shtml
Regards,
Dharmesh Purohit

Similar Messages

Oracle Application Server problem

Dear Zedi Masters(Oracles),
I am facing a problem in my Oracle Application Server. The Installation works smoothly, but afterwards if I try to Reload the Webnode manager it gives an error saying the ORB cannot be started" and "start ORB manually" Can someone explain the problem and how to overcome it.
I have also tried "owsctl reload" from the command prompt and have got the same reply.
Thanx in anticipation.
May the Force be with you.
Anand

I get the same error message - except that it happens without
protection on the virtual directory and it continues to display
the message when I reload.
Regards,
JJ
Girish (guest) wrote:
: Hi All
: we are using Oracle Application Server 4.0 Enterprise Edition.
: We are using PL/SQL Cartridges. We have set Client Session
: property of pl/sql application is set to enabled. Also max
: session idle time is set to 1800. We have also protected the
: PL/SQL virtual path.(that is before accessing any stored
: procedure from the virtual path ; user has to provide username
: and password). Now when the user tries to access protected
: virtual path the user name and password box gets displayed.
But
: after entering correct user name and password when user hits
on
: OK button message "Can not service this request, please try
: again later" is displyed for the first time. After this
message
: if page is reloaded then proper page is displayed..
: any ideas about why this is happening..
: thanks in advance
: Girish
: have a nice day...........
null

Oracle Applications Manager problem after cloning 11i

Hi All,
After cloning ebs 11.5.10.2 from AIX 5.3 to AIX 6.1, I have problem with OAM.
When I call OAM, after login, I get a blank page with Oracle icon in the upper left corner.
It seems that everything else works fine.
Acces_log, error_log does not give any error message.
Really appreciate your help
Thanks
Boris

Hi.
I tried all the above, without success.
Now I have a new problem, after I tried to relink according DOC ID 356878.1
adrelink.sh force=y "ad adadmin"
an error occurs:
"XCOFF64 object files are not allowed in 32-bit mode".
After playing with [ID 456985.1] and OBJECT_MODE=64 I do not know what next,.
Is it problem with AIX 6.1 and database 9.2.0.6 (which is part of ebs 11.5.10.2)?
Thanks
Boris

Oracle Application Release 11 having error

Hi all,
I'm having problem with our Oracle Application Release 11. When I create a new Responsibility in General Ledger, I follow the exact step to create responsibility. But when I use the responsibility to open a Form in AP>Setup>Payment>Format , it gives us this error message->>> FRM-40735 PRE-FORM trigger raised exception NO_DATA_FOUND
This is the first time we create responsibility after doing upgrade and patching. Could it probably have mess things up?
Thanks for any reply!!! Really appreciate it if anyone out there can guide us on this.

OK... i ve found the answer on this
http://www.orafaq.com/forum/t/61820/0/?

Problems with the deployment to Oracle Application Server 9.0.2

I am having a problem to deploy a simple JSC application to Oracle Application Server 9.0.2.
I am getting an error:
500 Internal Server Error
java.lang.NullPointerException
     at javax.faces.webapp.FacesServlet.init(FacesServlet.java:144)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpApplication.loadServlet(HttpApplication.java:1687)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpApplication.findServlet(HttpApplication.java:4020)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2218)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:585)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].util.ThreadPoolThread.run(ThreadPoolThread.java:64)
However i don't have any problems to deploy my applications to new release of Oracle AS 10g (9.0.4).
Unfortunately we still work with the old version (9.0.2)of the Oracle AS.
Any help will be greatly appriciated
Thanks
Yuriy

I try it but cant deploy in less than 10g.
AFAIR is an JRE version issue.
I lost at least 2 days trying.
Regards.

Problem Installing Oracle Applications 11i on

Gurus.. Please help...
I am trying to install oracle applications 11i on Windows XP Professional and for some reason the process is getting stuck at :
Step 3 of 5
Command: c:\oracle\proddb\9.2.0\temp\PROD\adrundb.cmd
g Performing database characterset conversion adsvdcnv.cmd
I have tried several times and everytime it is getting stuck at this stage only.
I am installing in language English only... and selected most of the options defaulted by the system.
The system doesnot give any error message but get stuck at this point for hours. Couldn't figure out the problem... Please throw in some ideas... Thanks in advnance...

Check the install log, this will tell you what happened with the file that was having problems. If you want to email the log to me i will have a look. But a lot of people have the same problem with this file so it's easy to fix.
[email protected]

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is.

I have problem with deployment of my customised module in oracle applications

Hai,
I have started working with oracle application just recently as I started to customise Forms & Reports.
If I am developing forms and reports from the existing modules it is working fine.
But as we can develop our own customized module in oracle applications.I did the following steps for the same..
This is in Rel.11.0.28
1.I registered my own schema in the back-end.
2.then registered the same in AOL.
3.Registered the custom application in the Aol.
4.while registering gave the Base Path..XX_top.
5.Defined Datagroup with APPS as the user ID.
6.created the directories in the server..oa\applprod\custom_app_name\11.0.28\us\
6.went to the environment file ...it is Prod.en
7.gave the base path.
8.restarted the server.
9.created forms based on my schema tables & views
10.generated the forms
11.pasted them in the base path directory
...and then did all the registrations in aol.and allocated the menu to the concerned responsibility and that to the user.
Now the problem is ...
when I am logging in to the coressponding user..
it is getting logged in..
I can see my menu..
but the function i.e. the form is not getting opened.
I am not able to understand where the problem is lying...please if any one could solve the problem it would be highly appreciated.
Thanking u in advance.
Sushma.

Not familiar w/ 11.0.28, but if this is on NT, I've found you need to add your xx_top path to the appropriate place in the NT registry.

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

Can you open the Preview program without loading a file, like by itself?
If it doesn't load then I suspect a corrupt Preview preference file.
Deleting the System Preference or other .plist file
Can you open other files with Preview, like jpg's and images?
How about other PDFs? or is it just that one you have downloaded?
Run through this list of fixes
Step by Step to fix your Mac

Problem while configuring webutil on oracle application server 10g(9.0.4)

hi,
I have configured webutil with oracle application server 10g(9.0.4).JInitiator 1.3.1.17 is installed.
I did everything according to webutil manual.Then i developed a form using developer suit 10g (9.0.4).
and successfully compiled and attached webutil library.then i subclass
webutil object group from webutil.olb into my form,that is also
subclassed successfully.Form has also been compiled and saved
successfully.
also configured my formsweb.cfg,forms90.conf,default.env according to webutil documentation.
{color:#993366}Now when i run this form from client, it does not show form in the
browser and shows a message on the client browser console as follows{color}.
{color:#0000ff}*Applet oracle.forms.webutil.common.RegisterWebUtil*
{color} {color:#993366}After this message,It does nothing and if i refresh browser,it shows following message in the browser' Console.{color}
{color:#0000ff}*Applet oracle.forms.engine.Main notinited.*{color}
Note:In the browser ,loading java applet is also visible.
how should i resolve this problem?
any suggestion?
Its urgent.
Regards,
abbasyazdani

Refer this metalink note,
566628.1 How To Install Webutil on 10g Oracle AS
[email protected]

Problem with clustering of oracle application server 10.1.3.1

Hi
I have clustered two instances of oracle application server 10.1.3.1 running on solaris.
Instance 1
<notification-server interface="ipv4">
<port local="6100" remote="6200" request="6003"/>
<ssl enabled="true" wallet-file="$ORACLE_HOME/opmn/conf/ssl.wlt/default"/>
     <topology>
          <nodes list="10.x.x.1:6201"/>
     </topology>
</notification-server>
Instance 2
<notification-server interface="ipv4">
<port local="6101" remote="6201" request="6004"/>
<ssl enabled="true" wallet-file="$ORACLE_HOME/opmn/conf/ssl.wlt/default"/>
<topology>
          <nodes list="10.x.x.2:6200"/>
     </topology>
</notification-server>
But when i log on to enterprise manager i get the following message on top of the page:
You have more than one instance of the Application Server Control application running in this cluster. This is not a recommended configuration and could lead to unexpected problems. Please stop the additional instances of Application Server Control or disable routing to these instances.
When i click on one of the instances, i get the session expired error.
what is the problem behind this?
regards,

In the doc, it states that you should only ever have one active instance of application server control running in a cluster at a time -- ASC was not designed to operate as a session sharing application, so your session state is specific to one instance. If for some reason you were directed to the ASC application on the other instance, you get errors.
You can use the OC4J admin_client.jar utility or the opmnctl command to shut down the ascontrol application in one of the instances.
-steve-

Problem in oracle application server 10g

hi all
i have problem with application server 10g
my situation :
oracle database 10g release 2
oracle application server 10g ( forms,reports)
and i installed the database and application server on the same computer , and with windows xp service pack 2 os
my problem is when i start the computer that connected to a network some services of application server not working , note that no problems with the database
and i installed node 32 antivirus
can any one help me plz ?

Wich processes don't start? do you have this services in Automatic?
Can you try to pass the to manual, and start the procs suing opmnctl command and check the logs of it?
Regards

Having problem to install Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit

Dear All Precious Friends,
I am having problem while installing Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit,
I have already installed Oracle Database 11g Release 2 -------
----Then i configured JAVA Access bridge
--------then installed and configured Required Schema using Repository Creation Utility of same version of Database 11g,
-----------then installed Oracle Business Intelligence 11g version 11.1.1.6.0 which includes Web logic..............I am feeling that i did right at this point...........
..............also feeling comfortable after install Oracle Identity and Access Management 11g ..................
-----------------but don't know how to configure OID to install Oracle Portal Forms Reports and Discoverer 11g...............
Please help my Oracle Friends
Your early help will be highly appreciated.
thanks and regards
Hassan

You said, "...+I would like to install Release 2(11.1.1.2.0)+ ...". Be careful. 11.1.1.2.0 is not Release 2. The version for Rel 2 is 11.1.2.0, notice that there is one less "1". Also, there is no way to patch from Release 1 to Release 2.
In EDelivery, this is what you should find if you search on "Oracle Fusion Middleware" for "Microsoft Windows x64 (64-bit)":
First look for this link then drill into it:
Oracle Fusion Middleware 11g Media Pack for Microsoft Windows x64 (64-bit)
In this section you will find the following:
This is the full product installation of FMw 11 Release 2 (Forms & Reports)
Oracle Forms and Reports 11g R2 (11.1.2.0.0) for Microsoft Windows x64 (64-bit) V28761-01
This is the full product installation of FMw 11 Release 1 (includes Portal, Forms, Reports, and Disco)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 1 of 4) V18785-01
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 2 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 3 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 4 of 4)
This is the FMw 11 Release 1 patch set that will bring the above 11.1.1.2.0 installation to 11.1.1.6. This is NOT a full product installation - just a patch
Oracle Portal, Forms, Reports and Discoverer 11g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x86 (64-bit) V29850-01
There are no patch sets for Release 2 as of yet.

I am having problems opening iTunes! ever since I updated to 10.5.3ver, I cannot open the application. I have deleted iTunes and all associated apps (bonjour, Cloud, Apple support apps, etc) and still something is wrong. I cant find it anywhere; where di

i am having problems opening iTunes! ever since I updated to 10.5.3ver, I cannot open the application. I have deleted iTunes and all associated apps (bonjour, Cloud, Apple support apps, etc) and still something is wrong. I cant find it anywhere; where did it go? I received the download confirmation each time for each application! HELP!! Using Win7 (64-bit)--IE9

Your post is too difficult to read. Please repost using paragraphs.
In the interim... For All things TM... See Pondini's Excellent information here...
http://pondini.org/OSX/Home.html
In particular... FAQs and Troubleshooting.

Having problem in using RUN_PRODUCT in oracle apps 11.0.3

I am having problem in using RUN_PRODUCT in oracle apps 11.0.3. Error in oracle apps is
FRM-40733 PL/SQL built-in RUN_PRODUCT failed
What could be the possible cause for this error ?

Hi again;
I found this please also check this:
Price List Migration from 11.0.3 to 11.5.10/R12.
Regard
Helios

Oracle application having problem on PIX to ASA L2L tunnel.

Similar Messages

Maybe you are looking for