Oracle Application Release 11 having error

Hi all,
I'm having problem with our Oracle Application Release 11. When I create a new Responsibility in General Ledger, I follow the exact step to create responsibility. But when I use the responsibility to open a Form in AP>Setup>Payment>Format , it gives us this error message->>> FRM-40735 PRE-FORM trigger raised exception NO_DATA_FOUND
This is the first time we create responsibility after doing upgrade and patching. Could it probably have mess things up?
Thanks for any reply!!! Really appreciate it if anyone out there can guide us on this.

OK... i ve found the answer on this
http://www.orafaq.com/forum/t/61820/0/?

Similar Messages

Oracle Applications Release 12 and Oracle Warehouse Builder 10gR2

Hi
I'm trying to deploying process flows to Workflow but I get the following error:
RPE-02054: The version of Oracle Workflow is incompatible with this Control Center. Required 2.6.3, but found 2.6.0.
Comment I found on another thread: "As far Workflow Versions with Oracle Applications is concerned, it is always 2.6.0. Workflow is not identified with its 2.6.x versioning in Oracle Applications. The 2.6.x.x versioning is purely for Workflow Standalone."
Oracle Warehouse Builder Client: 10.2.1.31
Oracle Warehouse Builder Repository: 10.2.0.1.0
Oracle Applications Release 12
Any help would be appreciated.

May be the excerpt from the other thread is a response I posted.
So, when you say, deploying process flows to Workflow, I do not understand what you are doing exactly? If this involves the Oracle Warehouse Builder you may want to explain a little more in detail since I do not understand how OWB works with Workflow. But as far as I have heard, it is Workflow standalone that is packaged with OWB but you are deploying into Oracle Applications.
What is the version of Oracle Workflow Builder you are using?
Is the steps you are doing certified to be done with Oracle Applications R12?
Thanks

Cloning Oracle Applications Release 12 with Rapid Clone

Hi,
I was going through metalink doc 406982.1 Cloning Oracle Applications Release 12 with Rapid Clone.
I couldn't understand a few points.
I would appreciate if someone can guide me regarding the following queries.
There is a statement in the doc
1)An important principle in Oracle Applications cloning is that the system is cloned, rather than the topology ....
--What is meant by topology in this description?
2)The Cloning methodology posted on this document requires full Autoconfig complience.
--didn't get this point.
3)Note: In the copying tasks below, UNIX/Linux users should ensure that the symbolic links (soft links) are preserved when copying. On most UNIX platforms, this can be accomplished with the cp -RH command. Consult the UNIX man page for the cp command to check the parameters available on your platform.
--what soft links are being talked about?will the regular cp -R command not preserve the soft links?
4)For patching AutoConfig on the E-Business Suite R12 instance, AutoConfig needs to be enabled on both the applications tier and the database tier. (387859.1)
--HOw do I check if AutoConfig is enabled or not?
5)Why do I need to synchronize appsutil on database tier from application tier?
6)Why do we need to maintaain snapshot information?
What does snapshot actually do?
Thannks,
Rushi

This is what I get when doing "grep rror" from 9239089 logfile.
will be ignored without error.
will be ignored without error.
will be ignored without error.
0 files had fatal errors.
0 files had fatal errors.
Performing second half of mirrored copies...
No mirrored copies were executed in this patch.
oracle/apps/ad/splice/adError [120.0.12010000.1] {oracle/apps/ad/splice/adError.class }
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.2/forms/java/frmall.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.2/jlib/ewt3.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.2/jlib/ewt3-nls.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.3/lib/xmlparserv2.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.3/j2ee/oafm/applications/mapviewer/web/WEB-INF/lib/mvclient.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.3/j2ee/home/lib/mail.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.3/j2ee/home/lib/activation.jar: No metadata entry META-INF/JRIMETA.DAT found
oracle/apps/media/ieu_status_error
oracle/xml/parser/v2/XMLErrorMsg
oracle/xml/parser/v2/mesg/XMLErrorMesg
oracle/xml/parser/v2/mesg/XMLErrorMesg_ar_AE
oracle/xml/parser/v2/mesg/XMLErrorMesg_ca_ES
oracle/xml/parser/v2/mesg/XMLErrorMesg_cs_CZ
oracle/xml/parser/v2/mesg/XMLErrorMesg_da_DK
oracle/xml/parser/v2/mesg/XMLErrorMesg_de_DE
oracle/xml/parser/v2/mesg/XMLErrorMesg_el_GR
oracle/xml/parser/v2/mesg/XMLErrorMesg_en_US
oracle/xml/parser/v2/mesg/XMLErrorMesg_es_AR
oracle/xml/parser/v2/mesg/XMLErrorMesg_es_ES
oracle/xml/parser/v2/mesg/XMLErrorMesg_fi_FI
oracle/xml/parser/v2/mesg/XMLErrorMesg_fr_FR
oracle/xml/parser/v2/mesg/XMLErrorMesg_hu_HU
oracle/xml/parser/v2/mesg/XMLErrorMesg_it_IT
oracle/xml/parser/v2/mesg/XMLErrorMesg_iw_IL
oracle/xml/parser/v2/mesg/XMLErrorMesg_ja_JP
oracle/xml/parser/v2/mesg/XMLErrorMesg_ko_KR
oracle/xml/parser/v2/mesg/XMLErrorMesg_nl_NL
oracle/xml/parser/v2/mesg/XMLErrorMesg_no_NO
oracle/xml/parser/v2/mesg/XMLErrorMesg_pl_PL
oracle/xml/parser/v2/mesg/XMLErrorMesg_pt_BR
oracle/xml/parser/v2/mesg/XMLErrorMesg_pt_PT
oracle/xml/parser/v2/mesg/XMLErrorMesg_ro_RO
oracle/xml/parser/v2/mesg/XMLErrorMesg_ru_RU
oracle/xml/parser/v2/mesg/XMLErrorMesg_sk_SK
oracle/xml/parser/v2/mesg/XMLErrorMesg_sv_SE
oracle/xml/parser/v2/mesg/XMLErrorMesg_tr_TR
oracle/xml/parser/v2/mesg/XMLErrorMesg_zh_CN
oracle/xml/parser/v2/mesg/XMLErrorMesg_zh_TW
Errors and warnings are listed in the log file
Also I am getting same kind of errors for patches 8919489,9171651,9833058 and 12404574.
Although there were neither failures nor any ORA- error in any of the log files.
Please guide what needs to be done regarding the shown errors for the patches.
after executing adpreclone on db tier I got the following message in logfile.
error while preclone on db tier:Attempt to remove existing adcrdb.zip failed
What could have been wrong?
Is the message normal and can it be safely ignored?
As a pre-install task of patch 9239089,I executed adgrantsall.sql
which gave me a prompt Enter a value for 1:
I entered apps (apps schemaname/username)
Is it ok?
Thanks,
Rushi

Cloning Oracle Applications Release 11i

Hi,
for Cloning Oracle Applications Release 11i , is it ncessary to copy jre, oui and oraInventory directories from source database tier file system to trget ?
Many thanks before.

Applications / EBS is discussed in this category http://forums.oracle.com/forums/category.jspa?categoryID=11 (and there are more, if you look at the forums home page)
But, in general the oraInventory must exist to be able to patch or otherwise maintain the installation. Wouldn't think copying directories is a supported cloning method... Again, check with the proper forum. And use the Search function!

How to setup cash forecasting in Oracle Applications Release 12

Hi,
Is there any document/note/presentation which explains how to setup cash forecasting in Oracle Applications Release 12.
Balu

Thanks alot Mahesh Jayashan. I checked on following tables the DATA for year 2011 didnot exists it only contains for Previous Years and Months.
1- W_MCAL_PERIOD_D
2- W_MCAL_QTR_D
3- W_MCAL_YEAR_D
4- W_MCAL_CONTEXT_G
FOR TEST basses I Manually inserted Data for 2011 to W_MCAL_YEAR_D Table so data was shown on Dashboard for Year but i wasn't able to See for 2011 Months cause i didn't Manually inserted data in other tables.
Thanks man
chreeez
Edited by: 862383 on May 30, 2011 10:19 AM

Oracle 11g Release 2 "error in moving file"

Hi there, right now I'm trying to install Oracle 11g release 2 64-bit on Windows 7 64 bit. about half-way through the installation i get an error message:
"error in moving file C:\app\dlee14\product\11.2.0\dbhome_1\bin\oralbac11.dll to C:\app\dlee14\product\11.2.0\dbhome_1\bin\oralbac11.dll.dbl"
what's going on and how do i fix it?

1010200 wrote:
Dear Team,
we are getting error while installing RAT( workload features)
Neither D:\oracle\app\product\11gRel2/bin/orarat11.dll.dbl nor D:\oracle\app\product\11gRel2/bin/orarat11.dll exist.
Therefore, the ORACLE_HOME is in an invalid state with respect to the option '
Please suggest :I suggest that instead of hijacking a two year old thread that is only tangentially related to your problem, that you start your own thread with as many of your specific details as you can muster.

Oracle 11i release 2 error "Unable to get the current group"

Hi oracle gurus,
I have been trying to install oracle 11g rel 2 on HPUX 11.31 and i am getting the following error
# more installActions2010-01-06_10-27-37AM.log
oracle.install.ivw.db.driver.DBInstaller
-scratchPath
/u01/tmp/OraInstall2010-01-06_10-27-37AM
-sourceLoc
/u01/install/database/install/../stage/products.xml
-sourceType
network
-timestamp
2010-01-06_10-27-37AM
INFO: Loading data from: jar:file:/u01/tmp/OraInstall2010-01-06_10-27-37AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigComma
ndMappings.xml
INFO: Loading beanstore from jar:file:/u01/tmp/OraInstall2010-01-06_10-27-37AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigC
ommandMappings.xml
INFO: Restoring class oracle.install.driver.oui.ConfigCmdMappings from jar:file:/u01/tmp/OraInstall2010-01-06_10-27-37AM/ext/jlib/installcommons_1.0.0b.jar!/
oracle/install/driver/oui/resource/ConfigCommandMappings.xml
SEVERE: [FATAL] An internal error occurred within cluster verification framework
Unable to get the current group.
Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:11
INFO: Advice is ABORT
SEVERE: Unconditional Exit
INFO: Adding ExitStatus FAILURE to the exit status set
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -1
INFO: Shutdown Oracle Database 11g Release 2 Installer
$
>>
# more oraInstall2010-01-06_10-27-37AM.err
---# Begin Stacktrace #---------------------------
ID: oracle.install.commons.util.exception.DefaultErrorAdvisor:11
oracle.cluster.verification.VerificationException: An internal error occurred within cluster verification framework
Unable to get the current group
at oracle.cluster.verification.ClusterVerification.<init>(ClusterVerification.java:200)
at oracle.cluster.verification.ClusterVerification.getInstance(ClusterVerification.java:294)
at oracle.install.driver.oui.OUISetupDriver.load(OUISetupDriver.java:407)
at oracle.install.ivw.db.driver.DBSetupDriver.load(DBSetupDriver.java:161)
at oracle.install.commons.base.driver.common.Installer.run(Installer.java:216)
at oracle.install.ivw.db.driver.DBInstaller.run(DBInstaller.java:126)
at oracle.install.commons.util.Application.startup(Application.java:869)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)
---# End Stacktrace #-----------------------------
<<
$ uname -a
HP-UX rx2600 B.11.31 U ia64 <XXXXXXXX> unlimited-user license
# swlist | grep -i oe
HP-Caliper-PERF C.11.31.04 HP Caliper OE Bundle
HP-WDB-DEBUGGER C.11.31.04 HP DEBUGGER OE Bundle
HPUX11i-DC-OE B.11.31.0903 HP-UX Data Center Operating Environment
# swlist | grep -i qpk
QPKBASE B.11.31.0903.334a Base Quality Pack Bundle for HP-UX 11i v3, March 2009
# swlist -l product | grep -i c++
ACXX C.06.20 HP C/aC++ Compiler
C-ANSI-C C.06.20 HP C/aC++ Compiler
PHSS_37501 1.0 aC++ Runtime (IA: A.06.16, PA: A.03.76)
PHSS_39824 1.0 HP C/aC++ Compiler (A.06.23)
i start the installation as oracle and my group and user id is
$ id
uid=109(oracle) gid=102(oinstall) groups=101(dba),104(asmdba)
Please let me know what else do i need, we might have to use the hardware for testing another application so i am limited in terms of time constraints
any help is much appreciated, Thank you!!
Regards,
Dasjith
Edited by: user10247524 on Jan 6, 2010 7:52 AM

Hi Stig Sundqvist
Where can i find MOS Doc 983713.1 ??You have to login https://support.oracle.com/CSP/ui/flash.html and you have to CSI account. This site is oracle site for tech. documents for can rise SR etc.. for more details please check
What is CSI:
Re: Installing Oracle Database 10.2.0.4
And how do i do to fix this problem ????Login metalink then find upper note and follow document
Hope it helps
Regard
Helios

Oracle Applications Release 12.1.1 installation on windows 2003 failed

Hi All,
I am installing oracle 12.1.1.0 on windwos 2003 SP2.
I received some errors at the step 1 of 5 and till 13% of installation.
THe following are the errors reported in the Install log file located at:
Database logfile - F:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_stccspr01\08101732.log
E:\StageR12\startCD\Disk1\rapidwiz>echo off
/cygdrive/c/WINDOWS/system32/cmd
'which' command is available.
/usr/bin/gnumake
'gnumake' is available.
/usr/bin/cl
'cc' is available.
/usr/bin/link
'link' is available.
ERRORCODE = 0    ERRORCODE_ENDThe system cannot find the path specified.
========================================================================================================================================================================================================================================================
C:\DOCUME~1\oracle\LOCALS~1\Temp\1>(echo APPS & echo APPS ) | E:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;E:\StageR12\startCD\Disk1\rapidwiz\jlib\java;E:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;E:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;E:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;E:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;E:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;E:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDBTechStack -e F:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_stccspr01.xml -stage E:\StageR12\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at F:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_stccspr01\ApplyDBTechStack_08101752.log
|      0% completed
/      0% completed
-      0% completed
\      0% completed
|      0% completed       RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
C:\DOCUME~1\oracle\LOCALS~1\Temp\1>if 1 == 0 goto :ICFG_OK
C:\DOCUME~1\oracle\LOCALS~1\Temp\1>echo "Cannot execute configure of database ORACLE_HOME using RapidClone\n";
"Cannot execute configure of database ORACLE_HOME using RapidClone\n";
C:\DOCUME~1\oracle\LOCALS~1\Temp\1>if "" == "TRUE" goto :ICFG_OK
    RW-50010: Error: - script has returned an error:   1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instanceAfter further investigation in the following logfile Log file located at F:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_stccspr01\ApplyDBTechStack_08101751.log, i found the following errors:
Skipping Profile Phase
Skipping Apply Phase
Not able to rename adcvmlog.xml to F:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_stccspr01\adcvmlog.xml.08101752
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
      <filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
    Directory: F:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_stccspr01
      adsvdlsn.cmd            INSTE8_SETUP       1007
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStacksearched some notes on google, but didn't found anything preoper.
Please let me know what are the possible cause of this error and how to correct it.
Let me know, if you need any further information.

Hi,
THe installation started successfully and went beyond 13%. but at Step 3 of 5 i got another error and installation was completed till 53%.
Error occurred in ApplyAppsTechStack stage :
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks w
ill be executed.
Preparing to launch Oracle Universal Installer from C:\DOCUME~1\oracle\LOCALS~1
\Temp\1\OraInstall2011-08-12_01-07-46AM. Please wait ... Oracle Universal Instal
ler, Version 10.1.0.6.0 Production
Copyright (C) 1999, 2007, Oracle. All rights reserved.
...............................................................Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
Val: 0
Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
path: C:\DOCUME~1\oracle\LOCALS~1\Temp\1\OraInstall2011-08-12_01-07-46AM\jre\bin
;.;C:\WINDOWS\system32;C:\WINDOWS;E:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;C:
\Perl\site\bin;C:\msvc\VC\bin;F:\cygwin\bin;C:\Perl\bin;C:\WINDOWS\system32;C:\W
INDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\WI
NDOWS\system32;C:\Program Files\Microsoft SQL Server\90\Tools\binn\
toload is C:\DOCUME~1\oracle\LOCALS~1\Temp\1\OraInstall2011-08-12_01-07-46AM\Win
dowsGPortQueries.dll
100% Done.
Copying files in progress (Fri Aug 12 01:08:35 BST 2011)
.................................................Val: 0
.               79% Done.
Copy successful
Setup in progress (Fri Aug 12 01:08:42 BST 2011)
.....Oracle JAAS [Fri Aug 12 01:09:20 BST 2011]: exception: 9
opmnctl: opmn startedwe got the following errors in the following two logfiles:
1. Logfile located at :
E:\oracle\VIS\inst\apps\VIS_stccspr01\logs\08112230.log
/      3% completed
-      3% completed
\      3% completed       RC-50004: Fatal: Error occurred in ApplyAppsTechStack:
RC-50013: Fatal: Failed to instantiate driver E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
C:\DOCUME~1\oracle\LOCALS~1\Temp\1>if 1 == 0 goto :REG_OK
C:\DOCUME~1\oracle\LOCALS~1\Temp\1>echo Cannot execute registration of Applications Techstack
Cannot execute registration of Applications Techstack
C:\DOCUME~1\oracle\LOCALS~1\Temp\1>if "" == "TRUE" goto :INSIAS_OK
    RW-50010: Error: - script has returned an error:   1
RW-50004: Error code received when running external process. Check log file for details.
Running APPL_TOP Install Driver for VIS instance2. Logfile located at :
E:\oracle\VIS\inst\apps\VIS_stccspr01\admin\log\ApplyAppsTechStack_08120107
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
      <filename> <phase> <return code where appropriate>
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
    Directory: E:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I E:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I E:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I E:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I E:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I E:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I E:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone
      ouicli.pl               INSTE8_APPLY       -1
AutoConfig is exiting with status 1
RC-50013: Fatal: Instantiate driver did not complete successfully.
E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drvPlease find the complete logs files details at the following link:
http://www.filefactory.com/file/cde9fc8/n/Oracle_R12_Apps_TIer_INstall_logs_txt
Name of the logfile is: Oracle R12 Apps TIer INstall logs.txt
Please have a look at it and let me know what could be the possible cause of failure and its recommended solution.
Thanks Peeks.

Deploying a New Forms .ear File in Oracle Applications Release 12-FATAL ERR

Hello everyone, I am applying a scurity patch 7605070 to our R12 applications. As part of the post-install step, I need to follow Metalink Note 397174.1 to deploy a new forms .ear file.
However, I am getting following FATAL ERROR:
:->$FND_TOP/bin/txkrun.pl -script=CfgOC4JApp
*** ALL THE FOLLOWING FILES ARE REQUIRED FOR RESOLVING RUNTIME ERRORS
*** Log File = /apps/ecrmR12apps9/apps/crmcrm9_lnxcde21/logs/appl/rgf/TXK/txkCfgOC4JApp_Fri_May_29_11_54_43_2009.log
Program : /apps/ecrmR12apps9/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkCfgOC4JApp.pl started @ Fri May 29 11:54:43 2009
*** Log File = /apps/ecrmR12apps9/apps/crmcrm9_lnxcde21/logs/appl/rgf/TXK/txkCfgOC4JApp_Fri_May_29_11_54_43_2009.log
Enter Application name for re-deployment ? forms
Enter Oc4j Instance password for re-deployment ? welcome
Run Autoconfig <Yes/No> ? no
Required values for starting OC4J instance "forms":
====================================================
s_formsstatus = enabled
s_forms_nprocs = 1 (value should be greater than 0)
Existing values from the context file:
======================================
s_formsstatus = enabled
s_forms_nprocs = 1
*** Values for context variables are VALID ***
Stopping all OPMN processes.
OPMN stopped.
Errors encountered running /apps/ecrmR12apps9/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkCfgOC4JApp.pl
*******FATAL ERROR*******
PROGRAM : /apps/ecrmR12apps9/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkCfgOC4JApp.pl(/apps/ecrmR12apps9/apps/apps_st/appl/fnd/12.0.0/bin/txkrun.pl)
TIME : Fri May 29 11:55:09 2009
FUNCTION: TXK::Process::run [ Level 3 ]
MESSAGES:
Command error: <rc> = 32512, <command> = /apps/ecrmR12apps9/apps/tech_st/10.1.3/opmn/bin/opmnctl start
STACK TRACE
TXK::Error::abort('TXK::Error','HASH(0x99e2a24)') called at /apps/ecrmR12apps9/apps/apps_st/appl/au/12.0.0/perl/TXK/Common.pm line 299
TXK::Common::doError('TXK::Process=HASH(0xa662688)','Command error: <rc> = 32512, <command> = /apps/ecrmR12apps9/a...','undef') called at /apps/ecrmR12apps9/apps/apps_st/appl/au/12.0.0/perl/TXK/Common.pm line 314
TXK::Common::setError('TXK::Process=HASH(0xa662688)','Command error: <rc> = 32512, <command> = /apps/ecrmR12apps9/a...') called at /apps/ecrmR12apps9/apps/apps_st/appl/au/12.0.0/perl/TXK/Process.pm line 449
TXK::Process::run('TXK::Process=HASH(0xa662688)','HASH(0xa295488)') called at /apps/ecrmR12apps9/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkCfgOC4JApp.pl line 1469
TXK::RunScript::execOPMNControl('HASH(0xa4f977c)') called at /apps/ecrmR12apps9/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkCfgOC4JApp.pl line 532
require /apps/ecrmR12apps9/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkCfgOC4JApp.pl called at /apps/ecrmR12apps9/apps/apps_st/appl/au/12.0.0/perl/TXK/RunScript.pm line 105
TXK::RunScript::require('TXK::RunScript','/apps/ecrmR12apps9/apps/apps_st/appl/fnd/12.0.0/patch/115/bin...') called at /apps/ecrmR12apps9/apps/apps_st/appl/au/12.0.0/perl/TXK/Script.pm line 177
eval {...} called at /apps/ecrmR12apps9/apps/apps_st/appl/au/12.0.0/perl/TXK/Script.pm line 177
TXK::Script::run('TXK::Script=HASH(0x9d974d4)','/apps/ecrmR12apps9/apps/crmcrm9_lnxcde21/logs/appl/rgf/TXK','/apps/ecrmR12apps9/apps/apps_st/appl/fnd/12.0.0/patch/115/bin...') called at /apps/ecrmR12apps9/apps/apps_st/appl/fnd/12.0.0/bin/txkrun.pl line 150
(lnxcde21-ecrmapps9) /apps/ecrmR12apps9/apps/apps_st/appl/fnd/12.0.0/bin
:->
What should I do? Please advice...

Issue appears to be resolved :)
Here are the steps:
vi /apps/ecrmR12apps9/apps/tech_st/10.1.3/opmn/bin/opmnctl and updated following variable to the correct path. (I am not sure why these path's were still pointing to production environment. I cross checked another cloned instance and it is also pointing to production path)
ORACLE_HOME=/apps/ecrmR12apps9/apps/tech_st/10.1.3; export ORACLE_HOME
TNS_ADMIN=${TNS_ADMIN="/apps/ecrmR12apps9/apps/tech_st/10.1.3/network/admin"}; export TNS_ADMIN
Then, the issue got resolved:
:->$FND_TOP/bin/txkrun.pl -script=CfgOC4JApp
*** ALL THE FOLLOWING FILES ARE REQUIRED FOR RESOLVING RUNTIME ERRORS
*** Log File = /apps/ecrmR12apps9/apps/crmcrm9_lnxcde21/logs/appl/rgf/TXK/txkCfgOC4JApp_Fri_May_29_14_53_22_2009.log
Program : /apps/ecrmR12apps9/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkCfgOC4JApp.pl started @ Fri May 29 14:53:22 2009
*** Log File = /apps/ecrmR12apps9/apps/crmcrm9_lnxcde21/logs/appl/rgf/TXK/txkCfgOC4JApp_Fri_May_29_14_53_22_2009.log
Enter Application name for re-deployment ? forms
Enter Oc4j Instance password for re-deployment ? welcome
Run Autoconfig <Yes/No> ? no
Required values for starting OC4J instance "forms":
====================================================
s_formsstatus = enabled
s_forms_nprocs = 1 (value should be greater than 0)
Existing values from the context file:
======================================
s_formsstatus = enabled
s_forms_nprocs = 1
*** Values for context variables are VALID ***
Stopping all OPMN processes.
OPMN stopped.
OPMN started.
Deplolying Application : "forms" onto OC4J instance: "forms"
Application deployed successfully.
Stopping and starting OC4J instances.
Started OC4J instances.
Binding webApp : "forms" with webmodule : "formsweb" for OC4J instance: "forms"
Web application bound successfully.
Stopping OPMN.
OPMN stopped.
Program : /apps/ecrmR12apps9/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkCfgOC4JApp.pl completed @ Fri May 29 14:54:13 2009
End of /apps/ecrmR12apps9/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkCfgOC4JApp.pl : No Errors encountered
Now I am not sure if the changes I made to opmnctl file is correct or not. I mean can I vi this file and update the value in this file as I wish, or should I be following some procedure to update the correct path.

Oracle Applications Release 11i with Oracle Database 10g Release 2 (10.2.0)

Hi,
I am upgrading our Oracle EBS 11i database to Oracle 10g R2 as per note:362203.1.
In section After the Database Upgrade --> 5. Implement and run AutoConfig we need to refer to Note:165195.1.(Section 8: Migrating to AutoConfig on the Database Tier).
Since I dont have the DB enviornement file, I created one by copying the envioroment file from Oracle 9i Home and replaced 9.2.0 with 10.2.0. I also created Apache directory under Oracle 10g Home and copied perl directory from Oracle 9i Home/Apache to Oracle 10g Home/Apache. This way I got the DB enviornement file for Oracle 10g Home.
Then I used the following command to create the DB Context File:
perl adbldxml.pl tier=db appsuser=apps
Then executed autoconfig using:
adconfig.cmd contextfile=<Full path to the CONTEXT>
Is this the way I should do? Its working ok but I am not sure if my method is ok.
Plz suggest if some other method is there.
Thanks.
Thiru

This is a way I used to do it too. I am not sure whether it is the official way, but it works nevertheless.
Do make sure you run autoconfig afterwards, which will create a new environment file for you. Then stop listener and database, source the new environment file and restart listener and database.
I found some other procedure in order for you to recreate the environment file:
1. On the application tier, Execute $AD_TOP/bin/admkappsutil.pl to generate appsutil.zip for the database tier.
2. Copy this appsutil.zip to the database tier and unzip it into the ORACLE_HOME
3. Set the following environment variables:
ORACLE_HOME =<10g ORACLE_HOME>
LD_LIBRARY_PATH = <10g ORACLE_HOME/lib, 10g ORACLE_HOME/ctx/lib>
ORACLE_SID = instance name running on this database node.
PATH= $PATH:$ORACLE_HOME/bin;
TNS_ADMIN = $ORACLE_HOME/network/admin/<context_name> 4. Edit the $ORACLE_HOME/network/admin/tnsnames.ora file. Change the aliases for SID=<new RAC instance name>
5. Modify the listener.ora. Change the instance name and Oracle Home to match environment
6. Start the listener.
7. From the 10g ORACLE_HOME/appsutil/bin directory, create an instance-specific XML context file by executing the command:
adbldxml.pl tier=db appsuser=<APPSuser> appspasswd=<APPSpwd>8. De-register the current configuration using the command:
perl $ORACLE_HOME/appsutil/bin/adgentns.pl appspass=apps contextfile=$CONTEXT_FILE -removeserver9. Rename $ORACLE_HOME/dbs/init<rac instance>.ora , to a new name (i.e. init<rac instance>.ora.old in order to allow AutoConfig to regenerate the file using the RAC specific parameters.
10. From the 10g ORACLE_HOME/appsutil/bin directory, execute AutoConfig on the database tier by running the adconfig.pl script.
Now you should have the officially created environment file.
HTH.
Arnoud Roth

Oracle Applications Release 11.0 CD Pack for MS Windows NT

1. Can I install this on Windows 2000 server?
2. If yes, when I try to install, the one hour install pops an error showing, "One hour install requires that the TCPIP Domain name is set"
How do I fix this?
Please help
Regards
Madhu

Hi Nick!
There was a bug logged on this same issue Bug No. 2163235 from a customer.
Have you tried some of the following troubleshooting techniques:
1. After you've selected the set of books form from the menu, is the Applications processing anything or just no response? Any error message at the bottom of the left hand side corner of the screen at all?
2. Have you tried to regenerate the set of books form (GLXSTBKS.fmx)?
3. Can you open up any other setup form? Like the Journal Categories (Setup->Journals->Categories) or Journal Sources form (Setup->Journals->Sources)?
4. If there are no error messages at all and you are able to open up other forms in GL, and have already set up a calendar and chart of accounts to be used for a set of books, have you recompiled all invalid objects and regenerated the GLXSTBKS form as well as all forms via adadmin?
5. If you go to the directory $GL_TOP/forms/US/, does the file GLXSTBKS.fmx exists and has the correct permission (execute and read)?
6. What if you change to a different GL responsibility, such as General Ledger SuperUser? Does the set of books form come up?
7. Can you try using the Vision Demo database with the GL Super User responsibility? The form function should be assigned to the GL Concurrent Request data group. (From System Administrator Responsibility, open the Define Responsibilities form to see what data group is assigned to the GL responsibility).
--Theresa

Oracle application cloning error

Hi
I tried to do the cloning in oracle application 11.5.10.2, but I got the following error control file creation failed, now my database status is nomount stage, now I create the control file manually its possible please give me the solution.
Regards
D

Hi,
What is the complete error message?
If you have managed to create the control files manually, you can follow the steps in (Note: 230672.1 - Cloning Oracle Applications Release 11i with Rapid Clone), under "Appendix B: Recreating Database control files manually in Rapid Clone." section. Otherwise, you will have to shutdown the source database properly, take a backup, and repeat the normal cloning steps.
Regards,
Hussein

Oracle Application is not working on IE7

Hi All,
I have updated my IE6 with IE7 and when i am trying to run oracle application, i successfully logon but When application try to run applet that time IE terminated by application.
and got this mkessage.
Problem caused by Java
This problem was caused by Java. Java was created by Sun Microsystems, Inc..
Microsoft has been unable to contact the manufacturer and has no further information available at this time.
Recommendation
For more information about Java, go online to the Sun Microsystems, Inc. website:
Sun Microsystems, Inc.
If you are unable to fix this problem and continue to receive errors, you can also remove Java.
What IE setting i need to do. I have window-XP,oracle application 11.5.10.2, Jinitiator 1.3.1.21 and 1.3.1.26.
Thanks
Ravi

Certified Configurations of Windows Vista + IE7 with E-Business Suite
Release 11i -- 11.5.10.CU2
- Applications 11.5.10 plus Maintenance Pack 11.5.10 CU2 or later
- Oracle Developer 6i Patchset 18 (6.0.8.27.x) or later (Metalink Note 125767.1)
- Oracle Applications Technology 11i.ATG_PF.H Rollup 4 (RUP 4) (patch 4676589) or later
- Microsoft Vista desktop clients running Internet Explorer 7
- Sun Java plug-in (JRE) 1.5.0_12
Release 11i -- 11.5.9.CU2
- Applications 11.5.9 plus Maintenance Pack 11.5.9 CU2 or later
- Oracle Developer 6i patchset 18 (6.0.8.27.x) or later (Metalink Note 125767.1)
- Oracle Applications Technology 11i.ATG_PF.H Rollup 4 (RUP 4) (patch 4676589) or later
- Microsoft Vista desktop clients running Internet Explorer 7
- Sun Java plug-in (JRE) 1.5.0_12
Release 12
- Oracle Applications Release 12 with R12.ATG_PF.A.DELTA.3 (patch 6077669) or later
- Microsoft Vista desktop clients running Internet Explorer 7
- Sun Java plug-in (JRE) 1.5.0_12
http://blogs.oracle.com/schan/2007/11/08

Issue with FRD and Forms Trace in Oracle Apps Release 12.0.6 forms

Hi,
Morning..could someone please assist us with this issue..
We are trying to generate FRD and Forms Trace for a seeded Oracle Apps Forms in Release version 12.0.6
1. We have setup the below mentioned profile option at the user level : ICX: Forms Launcher
value : http://<host_name>:<port number>/OA_HTML/frmservlet?record=forms tracegroup=medium
tried with this value as well : http://<host_name>:<port number>/OA_HTML/frmservlet?record=forms tracegroup=0-97
and then log out and then tried the transaction steps again in Oracle Apps frontend
2. Then checked at the directory location named : $FORMS_TRACE_DIR and there we see a file generated like this :forms_19136694.trc
But in this file we could only see the generic seeded error messages...why are we not seeing all the message calls showing all the details regards form level trigger , data blocks , values etc for the form
We need to have the FRD & Forms trace generated urgently for an issue...
Could someone please help us as to how a complete FRD & Forms Trace be generated in Oracle Forms in Oracle Apps version R 12.0.6 & what exact steps need to be checked.
Thanks

2. Then checked at the directory location named : $FORMS_TRACE_DIR and there we see a file generated like this :forms_19136694.trc
But in this file we could only see the generic seeded error messages...why are we not seeing all the message calls showing all the details regards form level trigger , data blocks , values etc for the form What is the timestamp of the file? Have you tried to delete/rename the file, reproduce the issue and see if a new file is generated?
You would need to logout and login again, or bounce the application services (if possible) after doing the necessary configuration steps and before reproducing the issue.
We need to have the FRD & Forms trace generated urgently for an issue...
Could someone please help us as to how a complete FRD & Forms Trace be generated in Oracle Forms in Oracle Apps version R 12.0.6 & what exact steps need to be checked.Please see these docs.
R12: Forms Runtime Diagnostics (FRD), Tracing And Logging For Forms In Oracle Applications [ID 438652.1]
How To Collect And Use Forms Trace (FRD) in Oracle Applications Release 12 [ID 373548.1]
Steps To Take FRD Trace in 11.5.10 & R12 [ID 867943.1]
How To Generate A Stack Trace For Forms With Applications R12 [ID 789659.1]
Thanks,
Hussein

Export - Import in Oracle Application Database

The export in Oracle Applications Database works fine.
But the import always show some issue and sometimes never completes.
Even if it completes it complete with error , how to ensure an error free export/import ?
How to handle a table movement if the table consists of a LONG column ?

The errors are cannot import this tables..
Also mostly are of Long tables..Any IMP-XXXXX or ORA-XXXXX messages?
Can you explain how long objects are exported and imported ?What type of objects?
What is the database version?
Are you doing a full database import?
Also sometimes import hangs for 2/3 days?Does it hang when importing a specific object?
Did you follow the steps outlined in the following notes when you did the Export/Import?
Note: 362205.1 - 10g Release 2 Export/Import Process for Oracle Applications Release 11i
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=362205.1
Note: 230627.1 - 9i Export/Import Process for Oracle Applications Release 11i
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=230627.1

Oracle Application Release 11 having error

Similar Messages

Maybe you are looking for