Oracle Application Server 10g R2 32bit installation on RHEL 5.4 64 bit

Hi !
Is it possible to install 32 bit Oracle Application Server 10g R2 on 64 bit RHEL 5.4?
Is there some spacial care I need to take to do this?
Regards,
GC

May be possible but it is probably not tested by Oracle nor is it supported as error correction support for OAS 10g has finished more than a year ago.
A good starting point is My Oracle Support Note [url https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=564174.1]564174.1, "Oracle Application Server 10g (10.1.2) Installation Requirements for Linux OEL 5 and RHEL 5". Make sure that you always use a 32-bit emulated shell (linux32 bash).
Thanks,
EJ

Similar Messages

Oracle Application Server 10g Version?

--> Please tell me which Version I Install of Oracle Application Server 10g.
--> Its Installation and Configuration video.
--> How to Deployment/ Run Application on it and how its URL would be accessed from the client Computer
--> Did we need to install any software at client to for running Application throug accessing Oracle Application URL.
Please send the Complete Information Including Installation/Configuration and Apllication Deployment.
I try 3 time to Install and configure it from Oracle Documnetaion but yet not successfuly.
I am very,very thankfull to you

Ghulam Yassen wrote:
--> Please tell me which Version I Install of Oracle Application Server 10g.It depends. What do you want to run ? Maybe you could go straight to 11g or 12c ?
--> Its Installation and Configuration video.A video ? Really ? I can make one for you, but it will cost.
--> How to Deployment/ Run Application on it and how its URL would be accessed from the client ComputerThe administration interface is accessed via browser, on port 18101. Login as "ias_admin" plus the password you used at install time.
--> Did we need to install any software at client to for running Application throug accessing Oracle Application URL.Most of the time, no. If you run Forms you are going to need Java Plug-in at the client side.

Oracle application server 10g installer

I'am trying to install oracle application server 10g. During the installation it appeared some messages like these ones:
"Error al llamar al destino 'libso_install' del archivo make /u2001/frs/OraHome1/reports/lib/ins_reports.mk".
"Error al llamar al destino 'agent' del archivo make /u2001/frs/OraHome1/sysman/lib/ins_sysman.mk"
"Error al llamar al destino 'webm_install' del archivo make '/u2001/frs/OraHome1/forms90/lib/inst_forms.mk'"
I do not the reason of these error messages?
Are they related whit the fact tha I do not have de SDK 1.4.1 32BIT SR1 installed?
And I do not understand because when the installation begin it shows me the next message "All requirements met.":
Checking requirements...
Checking operating system version: must be 5200
Passed
Checking operating system patches: IY43980:bos.perf.libperfstat:5.2.0.11,IY44810
:bos.mp:5.2.0.12,IY44810:bos.mp64:5.2.0.12,IY44810:bos.up:5.2.0.12,IY45462:bos.a
dt.include:5.2.0.12,IY45707:bos.mp:5.2.0.12,IY45707:bos.mp64:5.2.0.12,IY45707:bo
s.up:5.2.0.12,IY46214:bos.adt.include:5.2.0.13,IY46214:bos.mp:5.2.0.13,IY46214:b
os.mp64:5.2.0.13,IY46214:bos.net.tcp.client:5.2.0.13,IY46214:bos.up:5.2.0.13,IY4
6605:bos.mp64:5.2.0.13,IY51801:bos.rte.aio:5.2.0.14 Passed
Checking operating system packages: bos.adt.base,bos.adt.lib,bos.adt.libm,bos.pe
rf.libperfstat,bos.perf.perfstat,bos.perf.proctools,X11.motif.lib Passed
Checking swap space: must be greater than 1536 MB.
Actual 2048MB Passed
Checking Temp space: must be greater than 400 MB.
Actual 689 MB Passed
All requirements met.
Moreover it finished the disk1 installation and never it ask me the disk2.
If I click on the continue button the installation continues but at the end it doesn't work?
Please, I need help !!!!
Thanks!!

Thanks to answer me Andreas.
You are ok, I can use make from the command line. Looks this:
(orafrs@anag:/u2001/frs/OraHome1/reports/lib)33%make ins_reports.mk
aix.oraclemake: Command not found.
(orafrs@anag:/u2001/frs/OraHome1/reports/lib)34%make -f ins_reports.mk
aix.oraclemake: Command not found.
(orafrs@anag:/u2001/frs/OraHome1/sysman/lib)40%make ins_sysman.mk
aix.oraclemake: Command not found.
(orafrs@anag:/u2001/frs/OraHome1/sysman/lib)41%make -f ins_sysman.mk
aix.oraclemake: Command not found.
I don't know hoy to test the ar command because I need some files to have my library.
How can I know if my compiler is installed? And if I need to install it, how can I know which compiler I need form my Aix 5.2 version?
Thanks for you time!!!!
I wait your answer

Oracle Application Server 10g Installation Guide for Windows

The link to Oracle Application Server 10g Installation Guide for Windows on the OTN Web Site don't work. Using search on site does not turn up any installation document for Oracle Application Server 10g.
How can I find the Installtion Guide or the Quick Installtion Guide for Oracle Application Server 10g for Windows?

Hi,
The docs you seek are available through the OTN documentation pages at: http://otn.oracle.com/documentation/index.html.
Click on the link for "Oracle Application Server Release 10g (9.0.4)" and then on the "View Library" link for part B10468_04 - Oracle Application Server 10g Online Documentation 10g (9.0.4.0.0) for Microsoft Windows.
The Docs are located under the Documentation tab.
Alternatively, here is the direct link to the Documentation Tab interface of the Library:
http://download.oracle.com/docs/cd/B10468_04/docs.htm
Regards,
Les

Oracle Application Server 10g R2 installation on Oracle Enterprise Linux 5

Hi there ...
I want to install Oracle Application Server 10g R2 on Oracle Enterprise Linux 5. Can I get an installation instructions (or steps) for that?
Oracle installation guide mentions Suse 9 & 8 and Red hat 3 & 2. There is nothing related to Oracle Enterprise Linux 5 or 4?
Thanks

Yes there is one for 10gR3 too:
Note:465159.1 Oracle Application Server 10g (10.1.3) Requirements for Linux OEL 5 and RHEL 5
Thanks
Shail

Oracle Application Server 10g Portal Installation

For Oracle Application Server 10g Portal do i need to install Oracle Application Server 10g Infrastructure If yes then how in windows because in this website only the discussed about Linux ... So please provide me link if in windows we need to install so i will download Oracle Application Server 10g Infrastructure ...
Thanks In Advance

Yes. Infrastructure provides the database to hold the portal metadata, the database and the app server services to manage single sign-on and security for portal, and the portal app server metadata repository (a different thing than the first)
To install App Server Infrastructure, follow the same steps as for a Linux installation. Just use Windows-style path names as compared to Linux style path names.
Make sure the portal is installed into a different home from the infrastructure.

Oracle Application Server 10g Standalone Installation

Hello,
Can you please let us know if it is possible to Install Oracle Application Server (10g) Standalone ( without SOA suite 10g).
If there is any documentation/link which can provide this information.
Thanks,
Hussain
PIM Dev Team

Hi,
Following are the version and platform details.
OAS Version - 10.1.3.4
Platform - IBM AIX 6.1
Questions
a) Please provide document/link with the details about how to install Standalone Oracle AS ( without SOA Suite)
b) Are are any restrictions in installing standalone Oracle AS ( in terms of License .. etc).
Appreciate your help.
Thanks
- Hussain

Oracle application sever 10g on 32bit and 64 bit platform windows 2003

Hello,
can any body please let me know the performance issues, differences between 32bit and 64bit of oracle application sever 10g? I heard there were some differences... where can i find the information try to look in oracle site not much help...
please help me out because we are in the process of installing the 10 application server on 32 bit platform on windows 2003.
Thanks much....

May be possible but it is probably not tested by Oracle nor is it supported as error correction support for OAS 10g has finished more than a year ago.
A good starting point is My Oracle Support Note [url https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=564174.1]564174.1, "Oracle Application Server 10g (10.1.2) Installation Requirements for Linux OEL 5 and RHEL 5". Make sure that you always use a 32-bit emulated shell (linux32 bash).
Thanks,
EJ

Installing Oracle Application Server 10g 10.1.2.0.2 on RHEL 5.3

Dear All,
My Linux version is RedHat 5.3
I want to Install oracle 10g Application Server on it please help me out to do so.
Please help me,thanks in advance.
Please provide me with the documentation link to install Oracle Application Server 10g 10.1.2.0.2 on RHEL5.3
Thanks and Regards
Monoj Das

install Oracle Application Server 10g 10.1.2.0.2 on RHEL5.3
Said that OAS 10.1.2.0.2 is desupported, you have to apply patch 10.1.2.3 to be fully certified on OEL/RHEL 5.
See MOS doc. ID 564174.1 Oracle Application Server 10g (10.1.2) Installation Requirements for Linux OEL 5 and RHEL 5

Oracle Application Server 10g Release 2 (10.1.2.0.2) on 64bit RHEL

HI,
EBS-12.1.3
DB 11gR1
I am Facing following Error: while installing Oracle Application Server 10g Release 2 (10.1.2.0.2) on 64bit RHEL
pwd
pwd
/shared/bishiphome/Disk1/install/linux64
[oravis@erptest linux64]$./runInstaller -ignoreSysPreReqs
Starting Oracle Universal Installer...
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-07-20_08-52-57AM. Please wait ...The Java RunTime Environment was not found at /tmp/OraInstall2011-07-20_08-52-57AM/jdk/jre/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directory
Should i install JRE in the Server
Thanks
Vishwa
Edited by: Vi**** on Jul 19, 2011 10:18 PM
Edited by: Vishwa on Jul 25, 2011 3:30 AM

HI,
Change the above to the following and see if you get any error:
$ /shared/bishiphome/Disk1/install/linux64/runInstaller ignoreSysPrereqs -jreLoc /usr/shared/bishiphome/Disk1/install/linux64/runInstaller ignoreSysPrereqs -jreLoc /usr
Starting Oracle Universal Installer...
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-07-26_08-46-15AM. Please wait ...[oravis@erptest ~]$ Exception in thread "main" java.lang.ClassFormatError: oracle.as.install.engine.modules.install.exception.InvalidInventoryPointerException (unrecognized class file version)
at java.lang.VMClassLoader.defineClass(libgcj.so.7rh)
at java.lang.ClassLoader.defineClass(libgcj.so.7rh)
at java.security.SecureClassLoader.defineClass(libgcj.so.7rh)
at java.net.URLClassLoader.findClass(libgcj.so.7rh)
at java.lang.ClassLoader.loadClass(libgcj.so.7rh)
at java.lang.ClassLoader.loadClass(libgcj.so.7rh)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:488)

Oracle Application Server 10g on Oracle VirtualBox

Dear All,
I recently almost completed learning OAS 10g, I know 10g is now a past. but it needs to learn various basics of 10g. like Infra, Web, Applications server, database server etc. All this I have learned on single machine with Quad 2 Core+8GB RAM+320 Hdd and 2.4Mhz processor.
Now, I want to install all four products(above) sepretly on Oracle Virtual Box Virtual Machines(VM). Can any one have this experience and share with me step by step and what configuration (like RAM,space etc) is needed on one VMs for each product. Thanks.

Hello! you can follow this link:
ORACLE-BASE - Oracle Application Server 10g Release 3 (10.1.3) Installation On RedHat Advanced Server and CentOS

Oracle Application Server 10g on a virtual environment

Hi,
Can anyone provide us the Step by Step approch to install Oracle Application Server 10g on a virtual environment on solaris cluster?

HI,
Oracle is provided two documents for OAS install in Solaris (32bit and 64bit).
Here I am providing both documents.
http://docs.oracle.com/cd/B31017_01/solx86.1013/install.pdf --- Oracle app server install 32bit
http://docs.oracle.com/cd/B31017_01/sol.1013/install.pdf -- orcle app server install 64bit
Award points it is useful.
Thanks,
satya

Oracle Application server 10g on RHEL 4

Hi Experts,
I have a oracle application server 10.1.3 which is installed on a IBM blade server which has Red Hat Enterprise Linux 4 (RHEL4) as operating system.
The server has a RAM of 8GB and has 4 processors (Intel XEON 3.8 GHz).
I have deployed an application on this server, the application has been developed in Oracle ADF (ver 10g). The jdeveloper version used for development was 10.1.3.2.0
I want to ask how many concurrent user session this server can handle concurrently. And how can i perform a stree or load testing on this server.
Are there testing tools available for stress testing (pls provide any name).
Using this configuration can this server can it handle around 500 sessions of users.
Thanks in advance .

May be possible but it is probably not tested by Oracle nor is it supported as error correction support for OAS 10g has finished more than a year ago.
A good starting point is My Oracle Support Note [url https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=564174.1]564174.1, "Oracle Application Server 10g (10.1.2) Installation Requirements for Linux OEL 5 and RHEL 5". Make sure that you always use a 32-bit emulated shell (linux32 bash).
Thanks,
EJ

How to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0)

Hi all,
I'd like to know if it's possible and how to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0), Windows version.
With the following code, I can see that the mail.jar used by the server is the one included in the jdk installation :
// I'm testing InternetAddress.class because I want to use commons-email-1.2.jar that requires mail.jar 1.4 (or higher) and activation.jar 1.1 (or higher)
// and I know that inside the commons-email-1.2.jar file, I need to call the InternetAddress.validate() method that throws a java.lang.NoSuchMethodError: javax.mail.internet.InternetAddress.validate()V if it is used with mail.jar 1.2.
Class cls = javax.mail.internet.InternetAddress.class;
java.security.ProtectionDomain pDomain = cls.getProtectionDomain();
java.security.CodeSource cSource = pDomain.getCodeSource();
java.net.URL location = cSource.getLocation();
System.out.println(location.toString());
This code returns : file:/C:/oracle/app/jdk/jre/lib/ext/mail.jar and this mail.jar file has an implementation version number: 1.2
- I've tried to include my own mail.jar (1.4.2) and activation.jar (1.1.1) files in the war file that I deploy, but it doesn't work (the server still uses the same mail.jar 1.2)
- I've tried to put the mail.jar (1.4.2) and activation.jar (1.1.1) files in the applib directory of my OC4J instance, but it doesn't work (the server still uses the same mail.jar 1.2)
- I know that a patch exists : I've read the following document: How to Make Libraries such as mail.jar and activation.jar Swappable ? [ID 552432.1]
This article talks about the Patch 6514136, but this patch only applies to : Oracle Containers for J2EE - Version: 10.1.3.3.0
Can you please help me ?
Thanks in advance for your answers,
Laurent

I strongly suggest to upgrade to AS 10.1.3 to get this.
Think of future support of AS 9.0.4. You will get not critical patch updates anymore.
--olaf

Oracle Application Server 10g Forms and Reports Services

Hi there,
I want to install Oracle Application Server 10g Forms and Reports Services. What must I download? The installation guide says that "Oracle Application Server 10g (9.0.4) Forms and Reports Services allows you to install and configure Forms and Reports Services without the need to install and configure all of Oracle Application Server 10g (9.0.4)" but it does not clearly state what exactly to download.
Oracle Application Server 10g Release 2 (10.1.2.0.2)
[http://www.oracle.com/technology/software/products/ias/htdocs/101202.html]
or
Oracle Developer Suite 10g (10.1.2.0.2)
[http://www.oracle.com/technology/software/products/ids/htdocs/101202winsoft.html]
Faoilean.

You might find better assistance in the APplication Server forum - Oracle Application Server - General

Oracle Application Server 10g R2 32bit installation on RHEL 5.4 64 bit

Similar Messages

Maybe you are looking for