Oracle Application Server Install Issue

Gurus,
There were 2 CD/DVDS (media) sent for the Oracle Application Server Install, but the Oracle Universal Installer did not ask for the 2nd CD while doing the Install, is this normal or I am not sure I missed any steps while installing the 1st CD/DVD.
I was waiting that it would ask for the IInd CD/DVD, But it never? but the Install looked clean and exited clean without any error.
Please advice.
Thanks
Sheik

The 2nd disk is Companion CD. It contains the install files for other components.
For instance, If you want to install Oracle HTTP Server only, then you use the companion CD to do so. It has many other individual installations.
Aalap Sharma :)

Similar Messages

Oracle Application server related issue

My application is developed using Oracle Developer suite 10g (10.1.2.0.2 ) and deployed in Oracle Application Server 10g R2 (10.1.2.0.2) in windows 2003 32 bit and its working fine.
My issue is as follows
1. Since Oracle Application Server 10g R2 (10.1.2.0.2) is not supported in windows 2008 64 bit, pls advise what version of Application Server 10g i should use. Please note that my
programs are developed using Oracle Developer suite 10g (10.1.2.0.2 ).
2. If i want to move to next development version (ie forms / Reports 11g) , which version of application server should i use.
Joe

The 2nd disk is Companion CD. It contains the install files for other components.
For instance, If you want to install Oracle HTTP Server only, then you use the companion CD to do so. It has many other individual installations.
Aalap Sharma :)

Oracle Applications Server Reports Issue

Dear All,
When running a report in application server 10g release2(10.1.2). It's showing a error message
"Terminated with error: <br>REP-56109: Job 119651 is terminated due to connection timeout."
Anyone can tell me a procedure to rectify this error. I am struck in development due to this not able to proceed further.
Version Used:
Reports 10.1.2.0.2
Data Base 11.1.0.7.0
Application server 10g release2(10.1.2)
Note: This error occurred only in application server.where in local report builder it is working fine.

Hi,
We have configured data base properly. This kind of problem we are facing in few reports.
apart that many other reports are working fine. however this reports are must to the customer for their MIS information.
Please advise us for a solution
Thanks & Regards
Dhamodaran

Version of Oracle application server

Hi,
How to find the version of Oracle application server installed on RedHat Linux AS machine and Sunsolaris10 machine?
Regards,
Mathew

Matthew,
If you have the application server installed, then you can query from the sys schema on the machine where you have your metadata repository installed (infra-home) to see the versions as follows:
select *
from app_registry;
for checking portal version, you can alternatively go to Builder page/ 'Administer' tab/ 'Portal' option/ 'Services' portlet/'Global Settings' - link. The resulting page will be taking you in the Main tab. Here look at the very bottom and you will see something like this.
Version Information
Oracle Portal Version: 10.1.4.0.0 (Build: 594)
hope that helps.
asif

BO & Oracle Application Server

Post Author: amr_foci
CA Forum: Deployment
i've a Business Objects System installe on a server machine (A), and an Oracle Application Server installed on Server machine (B),,,can i deploy the business objects system on the oracle application server instead of TOMCAT ???
i've red the installation guide and specially the chapter related with the deployment of the oracle application server, i did all the steps.. but nothing worked
could we do this initialy,, and how we could do it?
thank you

I tried manually to deploy web applications, but not successful. This is my deployment step following:
AIX 5.3: BOE XI 3.1 :
Copy all <INSTALLDIR>/bobje/enterprise120/java/applications/ to Windows Websphere D:\BO_WAS
WebSphere 6.1 location & IP (windows) :
C:\Program Files\IBM\WebSphere\AppServer1\
IP: 192.168.69.10
Log in to WebSphere Applicaton Server Administrative http://192.168.69.10:9060/admin
1. Under the Applications heading of the console navigation menu, click
Enterprise Applications on the left navigational pane.
2. Click the Install button and navigate to the location of the WAR file to
deploy. If deploying from a remote file system, select the Remote File
System option.
3. Enter a context root for the WAR file (e.g. /CmcApp for CmcApp.war)
(this format (/CmcApp) for Unix OS, have different in Windows ? Could you give me fully path?)
and
press the Next button, followed by Continue.
4. In "Step 1", give a unique name for your web application and proceed to
"Step 2".
5. Highlight the server you created (or highlight server1 if you didn't create
your own) from the Clusters and Servers and enable the Select
checkbox. Proceed to "Step 3".
6. Select the virtual host you created (or default_host if you didn't create
your own) from the Virtual Host drop-down list. Proceed to "Step 4".
7. Review the summary page, and press Finish when done.
8. Click Save to Master Configuration.
9. Click the Save link, then the Save button.
Finally the output is not available.
Many thanks in advance and best regards

Disabling oracle application server interface

Hi
I have an oracle application server installed along with oracle forms
When I type: http://hostname/
I see "welcome to oracle Application Server" interface.
How can I disable this interface ?

Hi All,
For all those concerned, I managed to download and install Oracle Database Server Version 10.1.0.4 Patch 4 for Windows server 2003 SP1 from Metalink. Please refer to document IDs. 161549.1 and 161546.1 for details on Patch 4488360.
The supplied documentation states that this patch contains all prevois patches hence it should contain the patch 2, i.e. 10.1.0.4.2 patches.
I have not checked the availability of this patch for other platforms.
Feedback:
I have installed successfully the patch on my Oracle 10g EE instance 10.1.0.4. Please read documentation for the requirements! (hint: in my case the DLL's used by Oracle services in the BIN folder were still in use even after the services were stopped!, I had to re-boot the server to free them).
Then installed the OAS repository using the repca wizard (hint: run the prereq. scripts before installation to detect any configuration requirements)
After I installed OAS infrastructure with Internet directory.
Then installed Portal & Wireless successfully.
Best regards,
Jesmond

Install Oracle Application server 10g and Oracle database 10g on same box

Hi Experts!
i need to install Oracle database and oracle application server on the same machine(windows xp).
when i install both of them and reboot the machine either oracle database or oracle application server fails...
i suspect that the problem might be due to two - ORACLE_HOME
let me know how i can resolve this issue.
Note: Oracle DB and OAS OPMN process run as a windows service.
after restart opmn fails
Many thanks in advance
-Raghav

Jacco, in spite of your ace :-) this time I cannot
completely agree with you:
I hope sincerely that this ace thing doesn't "scare" anyone from challengeing me. I can't know everything, even though this ace sign suggests it.
- things like ORACLE_HOME are also set in the system
environment settings. This may lead to conflicts;It does, therefore you should set them with the service (I figured the installer of Oracle would actually do that for you, but I hardly ever work with Windows)
- the database and AS have different versions of the
RSFs. The most recent AS version is using 10.1.0.5
RSFs, where the database uses 10.2.x. This leads to
conflicts.
- Port conflicts are common in the ONS area, however
this should not prevent startup and should not be
very likely at this point since all products use the
same inventory and it should have been checked for
ports that are in use.ons port conflics shouldn't precent startup, but other port conflicts can.
>
With the total of our posts the problem should be
resolved anyway ;)Exactly, as long as the reader has the proper knowledge to understand them ;)
(this feels like a post just to make sure that you know I respect your opinions and advices)

Oracle Application Server 10.1.3.1 installation issue

Hi,
I am trying to install Oracle Applicaiton server on linux and i have installed it on similar boxes before without any issues, however this time around after i am done with the installation, it is not showing me the enterprise console. It gives a successful installation message but with the following message.
Application Server Control Console is not running in this instance of Oracle Application Server. You can manage this instance remotely through another instance of Oracle Application Server that is configured to run Application Server Control Console.
What should I do to get the admin console. I also looking around and saw but emctl utitlity is not there in ORACLE_HOME/bin
Edited by: user9938780 on Dec 11, 2008 11:34 AM

the 10.1.3.1 version does not use emctl
if you do a opmnctl status -app you can see your applications, one of them is ascontrol
you can reach the emconsole through http://hostname:7777/em
to start you can issue opmnctl startproc application=ascontrol
reg
Michel
Edited by: MichelS on Dec 11, 2008 11:53 AM
Edited by: MichelS on Dec 11, 2008 11:54 AM

Installing the Oracle Application server 10 g release 3

Hi all,
I installed the basic installation of the oracle application server 10g release 3.After installation i was able to get the Aggrespy page listing the performance metric tables.The problem is that the page is not getting displayed in xml format when i give http://IPaddress:777/dmsoc4j/AggreSpy?format=xml. I was able to get the information in xml format in 10 g realse 2. I should go with upgrade installation or
or install directly for displaying metric data in xml format.
Thanks in advance, can anyone help me on this......

Hi,
I too am facing the same issue.
Please do lemme know if you have found anything abt this.
Thanks in advance.
Regards,
Sindhiya V.

Install Oracle Application Server on same as database server

How to Install Oracle Application Server.
Can I install on the same server as database server
Can some body provide a simple tutorial for Windows Installation.
Ss

If there is no licensing issues - then I could advice SOA Suite installation - there should be AS as well and many other features (BPEL e.g.). Personally I cann't see any need for installation manual as all the installation and configuration assistance poceeds automatically. Documentation can be found http://www.oracle.com/technology/documentation/appserver.html - usually zip contains large library of pdf, installation manual including.
Well - my problem is that I have installed partially SOA Suite (configuration assistants failed at web services) on machine without DB server, then I installed DB server and now I am trying to deinstall SOA Suite - but now for some days machine shows 100% CPU consumption and no any visible actions (no new errors as well)... What should I do? Kill the process and try to manually remove SOA? I plan after make another SOA installation after removal of this one.
Thanks in someone can help me!

How to install Oracle Report Services in Oracle Application Server 10.1.3.1

My project is running on Oracle Application Server(OAS) 10.1.3.1, and I need to develop some Oracle Reports for my client.
But I find out there is not "Oracle Report Services" component in OAS 10.1.3.1 like OAS 10.1.2.
Is there Oracle Report Services for OAS 10.1.3.1? How to get it?

Max Yuan wrote:
You mean I need to install 2 OAS(10.1.2 for report, 10.1.3 for my project), or deploy my project to 11g? For the Reports reporting project, you'll need a version/edition that includes AS Reports Services.
In "10gr2" that means AS 10.1.2.0.2 (plus Patch set): AS Infrastructure + AS BI&Forms installation (enterprise edition) or the standalone Forms and Reports installation (EE or separate licensing). You also need the Developer Suit (Reports Builder). OFM "11gr1" suite has some version of Reports Services but I don't know the available packages and installation types.

How to install ADF Runtime libraries to an Oracle Application Server 10g?

Scenario:
- JDev 10.1.3 (production) installed on my Win XP station.
- OC4J 10.1.3 Standalone installed on my Win XP station.
- OAS 10.1.3 (not OC4J Standalone) installed on a Linux SuSe server.
- I have admin credentials for the OAS but don't for the server.
Is it possible to install ADF Runtime from OAS Enterprise Manager? If yes, please, let me know. If not, I will have to bother server admin in order to copy those files. In this case, ca I rely on the log html file resulted from the install I made on my local OC4J instance in order to select the needed files?
Thanks in advance.
Regards,
Gustavo
São Paulo - Brasil

As far as i know the ADF libraries can be updated via the solution you gave :
Tools -> ADF Runtime Installer -> Oracle Application Server
but this only applies for an OAS installed on the same machine where jdev resides
for OAS in UNIX like systems i'm not sure if this can be done
as far as i know the libraries must be copied manually but i can't confirm this theory
i would like to know if it's possible to update the libraries from the Wizard on jdev installed on a windows machine to an OAS installed in UNIX?

Installing Oracle Application Server 10g 10.1.2.0.2 on RHEL 5.3

Dear All,
My Linux version is RedHat 5.3
I want to Install oracle 10g Application Server on it please help me out to do so.
Please help me,thanks in advance.
Please provide me with the documentation link to install Oracle Application Server 10g 10.1.2.0.2 on RHEL5.3
Thanks and Regards
Monoj Das

install Oracle Application Server 10g 10.1.2.0.2 on RHEL5.3
Said that OAS 10.1.2.0.2 is desupported, you have to apply patch 10.1.2.3 to be fully certified on OEL/RHEL 5.
See MOS doc. ID 564174.1 Oracle Application Server 10g (10.1.2) Installation Requirements for Linux OEL 5 and RHEL 5

Install and configure report service on Oracle Application Server 10g

i want to know how to install and configure report service on Oracle Application Server 10g Release 3 (10.1.3.1.0)
Thanks

the case is that we developed an ADF Application, so we want to deploy it on the latest version of Oracle Application server.
our application communicate with Oracle reports (run oracle reports from our Application) as there are no Oracle report products for JEE Application.
so if there are not report service that can run on Oracle Application Server 10g Release 3 (10.1.3.1.0),
what is the other choices that oracle supports that can help us in this case ???

Oracle application server 10.1.3.1.0 install - JAVA error

Hi Everyone,
I am trying to Install Oracle Application Server 10.1.3.1.0 on 32 bit Red Hat Enterprise Linux Server release 5.8 (Tikanga)
When running the Installer, I use the -ignoreSysPrereqs option because 10.1.3.1.0 is only supported with Linux Server 4, I believe. But I know people have installed it on Linux 5.7 and 5.8
anyways, Oracle application server gets installed and asks me to run root.sh. I run root.sh and then hit the OK button to proceed,
At this point, it tries to run the configuration assistant and fails right away with the following error:
Starting to execute configuration assistants
Launched configuration assistant 'Oracle Application Server Configuration Assistant'
Tool type is: Optional.
The command being spawned is: '/u01/app/oracle/product/10.1.3.1/jdk/bin/java -cp /u01/app/oracle/product/10.1.3.1/j2ee/home/applications/ascontrol/ascontrol/WEB-INF/lib/ascontrol.jar:/u01/app/oracle/product/10.1.3.1/j2ee/home/applications/ascontrol/ascontrol/WEB-INF/lib/log4j-core.jar:/u01/app/oracle/product/10.1.3.1/jlib/oraclepki.jar:/u01/app/oracle/product/10.1.3.1/jlib/ojmisc.jar: oracle.sysman.ias.studio.installer.ASControlConfigAssistant -sso false -j2eeinstance home -username oc4jadmin -password Protected value, not to be logged -oraclehome /u01/app/oracle/product/10.1.3.1'
Start output from spawned process:
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/sysman/ias/studio/installer/ASControlConfigAssistant
End output from spawned process.
Configuration assistant "Oracle Application Server Configuration Assistant" failed
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/sysman/ias/studio/installer/ASControlConfigAssistant
Any ideas? am i missing a library or environment variable?
Thanks

I have now set the following environment variables
ORACLE_BASE
ORACLE_HOME
TNS_ADMIN
PATH
JAVA HOME
and now when I try to run opmnctl startall, I get:
opmnctl: starting opmn and all managed processes...
globalInitNLS: NLS boot file not found or invalid
-- default linked-in boot block used
main: NLS initialization failed!!
globalInitNLS: NLS boot file not found or invalid
-- default linked-in boot block used
main: NLS initialization failed!!
globalInitNLS: NLS boot file not found or invalid
-- default linked-in boot block used
main: NLS initialization failed!!
opmnctl: opmn start failed.

Oracle Application Server Install Issue

Similar Messages

Maybe you are looking for