Oracle application server issue

Hi,
right now i m using oracle application server 10g on Hp-unix 11.11 (v1) , suddenly when the number of connection are increasing , memory usage reach to the 100% and my users got disconnected , previously it was the issue of number of connection and i increase the process parameter on the database side, my database is running on different node and application is on different node, the problem persist until i bouce the application server through opmnctl, any help will be appreciated.
thanks

These forums are for issues relating to EBS. Pl post in the OAS forum (Oracle Application Server - General for a better/faster response.
HTH
Srini

Similar Messages

Oracle Application Server 10g thread stuck issue.

We are having,
Oracle Application Server 10g [10.1.3.1 + 10.1.3.4patch] along with Oracle Http Server 2.0
Now there is a issue of thread stuck [some application threads taking longer times] due to which the application server is unable to respond and sometimes it reinits the oc4j instance.
=> Is there any setting to increase the Thread Stuck Time in OAS.
=> Is there any setting to stop the auto reinit of oc4j instance.
=> Does the auto re init of oc4j get logged in opmn.log as well as in service.log.
It will be really helpful if any advice on the same.
Thanks in advance...
ManojC

Look in httpd.conf file anything that is like thread in there you will find a simple description of the Directives.
Greetings.

Oracle Application server related issue

My application is developed using Oracle Developer suite 10g (10.1.2.0.2 ) and deployed in Oracle Application Server 10g R2 (10.1.2.0.2) in windows 2003 32 bit and its working fine.
My issue is as follows
1. Since Oracle Application Server 10g R2 (10.1.2.0.2) is not supported in windows 2008 64 bit, pls advise what version of Application Server 10g i should use. Please note that my
programs are developed using Oracle Developer suite 10g (10.1.2.0.2 ).
2. If i want to move to next development version (ie forms / Reports 11g) , which version of application server should i use.
Joe

The 2nd disk is Companion CD. It contains the install files for other components.
For instance, If you want to install Oracle HTTP Server only, then you use the companion CD to do so. It has many other individual installations.
Aalap Sharma :)

Oracle Application Server 10.1.3.1 installation issue

Hi,
I am trying to install Oracle Applicaiton server on linux and i have installed it on similar boxes before without any issues, however this time around after i am done with the installation, it is not showing me the enterprise console. It gives a successful installation message but with the following message.
Application Server Control Console is not running in this instance of Oracle Application Server. You can manage this instance remotely through another instance of Oracle Application Server that is configured to run Application Server Control Console.
What should I do to get the admin console. I also looking around and saw but emctl utitlity is not there in ORACLE_HOME/bin
Edited by: user9938780 on Dec 11, 2008 11:34 AM

the 10.1.3.1 version does not use emctl
if you do a opmnctl status -app you can see your applications, one of them is ascontrol
you can reach the emconsole through http://hostname:7777/em
to start you can issue opmnctl startproc application=ascontrol
reg
Michel
Edited by: MichelS on Dec 11, 2008 11:53 AM
Edited by: MichelS on Dec 11, 2008 11:54 AM

Language issue on Oracle Application Server Portal

Hello,
I have a application running on Oracle Application Server Portal. It is deployed on Win 2003 server(prod server). There is a language option to jump from english to arabic and arabic to english and the application is working on production server for both the languages but on some client machines the default page loaded is in english and on some client machine the default page loaded is in arabic. When we try to change the language from either of the languages it gives a message "Page cannot be displayed".
Please help me in solving this issue.
Thank you

Page cannot be displayed is one of the common problems, like fever. Please see application.log, apache error log to see any more specific reason for page cannot be displayed error. Look for any possible 'infection' which may have caused this 'fever', if you see what I am saying.
AMN

Oracle Application Server Install Issue

Gurus,
There were 2 CD/DVDS (media) sent for the Oracle Application Server Install, but the Oracle Universal Installer did not ask for the 2nd CD while doing the Install, is this normal or I am not sure I missed any steps while installing the 1st CD/DVD.
I was waiting that it would ask for the IInd CD/DVD, But it never? but the Install looked clean and exited clean without any error.
Please advice.
Thanks
Sheik

The 2nd disk is Companion CD. It contains the install files for other components.
For instance, If you want to install Oracle HTTP Server only, then you use the companion CD to do so. It has many other individual installations.
Aalap Sharma :)

Workspace Issue Using Oracle Application Server

Dear All,
I've configured my Workspace using Oracle Application Server and now I can login to my workspace through this url http://<servername>:7777/workspace/.
But somehow, at my workspace home, I cannot find the folder or Explore inside, which is to see my Financial Reporting.
I'm login using admin and the privileged is already for administrator.
Is there anyone ever face this problem..??
Thanks.
Regards,
V13N

1. Correct the following path
extension_dir = "D:/php/ext"
(if your php is installed in D:/php, the above path is correct.
2. Find the line ;extension=php_oci8.dll
delete comment sign (;) and it will be :
extension=php_oci8.dll

SSL test in Oracle Application Server 10.1.2

Hi ,
we are using one Oracle Application Server Web Cache 10.1.2 as our web server.This redirects users to the Application Server.(EBS 12.0.4)
Now we need to implement SSL to secure user credentials.So i am planing to implement SSL in our web cacahe server.Will this be enough to secure user credentials??I dont have any idea.Please help.
Moreover our web cache is not configured in SSL during the time of installation.Can any body suggest me a place from where i could get one demo Certificate to put it onto my web server and test the SSL confiration.EBS has provided one demo for application tier(inside $ORACLE_HOME/apache/certs/).
But we will have to implement in web cahe tier not in application tier.
We are using EBS 12.0.4 in Hp-Ux v11.23.

Hi susmit;
Please chekc below note which could be helpful for your issue:
SSL Primer on Using OpenSSL as a Certificate Authority with E-Business Suite (with a Windows Example) [ID 1175193.1]
Enabling SSL in Release 12 [ID 376700.1]
R12.0.6+ : Oracle Application Object Library SSL Test Transaction Data Test [ID 732282.1]
R12.0.[3-4] : Oracle Application Object Library SSL Test Transaction Data Test [ID 564066.1]
Regard
Helios

Oracle Application Server 10g Cloning - Urgent

Hello All,
I have been given a new assignment which involves Oracle Applications server 10g, i am new to oracle application server and hoping that some one will please clarify my doubts.
i have to clone a production machine (Solaris 10) which has oracle AS 10g, this machine had oracle database 10g before and just the application server was installed on it, i have to clone a test environment for this machine, i have the following two doubts
1) Is it possible to just install Oracle Application server 10g on a machine which already contains oracle 10g database, if so then what about the database that gets installed when installing Oracle application server 10g.
2) How to clone the above production machine, should the oracle 10g database be cloned first and then oracle application server 10g cloned on the new machine?
Eagerly waiting for a reply

user12077492 wrote:
i have to clone a production machine (Solaris 10) which has oracle AS 10g, this machine had oracle database 10g before and just the application server was installed on it, i have to clone a test environment for this machine, i have the following two doubts
1) Is it possible to just install Oracle Application server 10g on a machine which already contains oracle 10g database, if so then what about the database that gets installed when installing Oracle application server 10g.
2) How to clone the above production machine, should the oracle 10g database be cloned first and then oracle application server 10g cloned on the new machine?1) Yes, it is possible. The DB that comes with OAS as the infrastructure DB for it (I presume you are installing a full OAS with infrastructure and midtier both) does not affect the DB you already have on your system ... obviously ... as long as you install them in their separate homes.
2) I always say, this term cloning is somewhat loosely used in general communication meaning making copies. In OAS context, Cloning works for middletiers only. You cannot clone an infrastructure.
To make a redundant/alternate environment for OAS, you can do the following:
- a) either use the same infra on machine 1, and install another midtier and register with the same infra.
- b) or install a separate infra on machine 2, and also a midtier registered with it.
Here for the first option a), Cloning can be used because you can (*only*) clone a middle-tier. There are pros and cons for this setup, including that you share the SSO, and OID, and hence users and groups bases, etc on those two environments - something that you may or may not want. But then there are also some way-outs to avoid them or minimize their effects too. Please see the following reference for cloning and search on Metalink for how to minimize effects, once you get better familiar with the processes.
Oracle® Application Server Administrator's Guide
10g Release 2 (10.1.2)
B13995-08
[10 Cloning Application Server Middle-Tier Instances|http://download-uk.oracle.com/docs/cd/B14099_19/core.1012/b13995/cloning.htm#BCGBDIDF]
For b), you will need to Stage a server as defined in this reference.
[11 Staging a Test Environment from a Production Environment|http://download-uk.oracle.com/docs/cd/B14099_19/core.1012/b13995/prodtest.htm]
There are some notes on Metalink which address issues about benefits or procedures of Cloning and Staging an environment too.
There are some other ways to export/transport your applications to another instance across DB. Please also read about them.
hope that helps!
AMN

Does Oracle Application Server (10.1.3.4.0) support JSF 1.2?

Sorry for the double post, but I realized this was more appropriate in the OC4J forum so posted it there. Not sure how to delete this one :-(.
I am trying to migrate from JSF 1.1 to JSF 1.2 on OC4j 10.1.3.4.0 and am running in to problems. I recently stumbled on this post:
http://kjvarga.blogspot.com/2008/12/oc4j-1013-does-not-support-jsf-12.html
Which reads as follows:
I spent a very frustrating day wading through the version soup that is JavaServer Faces and trying to deploy a JSF 1.2 app on on OC4J 10.1.3 container. To save you a lot of time, OC4J DOES NOT SUPPORT JSF 1.2.
This technical paper explains that OC4J 10.1.3 (all versions) supports Servlet 2.4, JSP 2.0 and JSF 1.1.
http://www.oracle.com/technology/tech/java/oc4j/1013/whitepapers/OC4J-FOV-10131.pdf
And this handy webpage explains that "JSF 1.2 is the latest release and it works with servlet 2.5 and jsp 2.1". So obviously it's not compatible. It also details all the versions of Java technologies that each JSF version relies upon.
http://www.roseindia.net/jsf/jsf-versions.shtml
Is this true? I can't use the JSF spec released in 06 on the most current version of oracle application server? Could someone please confirm/deny/shed some light?
Thanks so much,
Yeuker
Edited by: yeuker on Jun 29, 2009 10:54 AM

Found a bit more information located here:
http://wiki.glassfish.java.net/Wiki.jsp?page=JavaServerFacesRI
See the section entitled
"Do I have to use a JSP 2.1/Servlet 2.5 container with the Mojarra version 1.2?" which states:
If you're using JSPs for your view descriptions, then yes, you will need to use a JSP 2.1/Servlet 2.5 compliant container. However, if you're using another view technology, such as Facelets or JSFTemplating, you can run JSF 1.2 within a Servlet 2.4 container with out issue.
Now here is the part that may make me look like a newb... not sure if I am "using JSP's for my view descriptions"... what does that mean anyway?
I dont think I am not using Facelets or JSFTemplating. I'm just using standard JSF... All of my pages end in jsp and the standard faces servlet that makes all *.faces requests go through the faces controller servlet. There is really no JSP EL code in my faces pages, just standard jsf tags h:form, f:selectItems, h:inputText etc...
So my question is... am I using JSP's for my view descriptions?

Oracle Application Server 10.1.3.3.0 OC4J Restarting

Oracle ADF application is deployed to the AS from JDeveolper 10.1.3.3.0 and runs fine initially but after continual use the OC4J returns a runtime exception and restarts.
1. This instance is not associated with an infrastructure but it is on a server with 10.1.2.2.0 Infra and middle tier instances.
2.The error occurs while using a web app. It all works fine at first, can nav pages, view records from the db just fine. Then after say 15mins the page returns Internal Server Error message at which time I check the Oracle app server ctrl to find the error below. That error is displayed in the actual app server ctrl page.
After a few minutes I can refresh the web app page and it returns to the home page working fine again until the next exception and restart. Sometimes as a result of this issue the server will not OC4J will not restart and the page will stop working altogether. At this point I cannot ever restart the OC4J. I have to Restart the entire server machine.
An error has occurred.
Caught exception calling invoke on oc4j:name=Singleton,type=OpmnConfig
Exception thrown in RequiredModelMBean while trying to invoke operation invoke
Object reference no longer valid (disconnected)
Object reference no longer valid (disconnected)
Hide Additional Trace Information
oracle.j2ee.admin.jmx.exception.config.ConfigMBeanException:
Caught exception calling invoke on oc4j:name=Singleton,type=OpmnConfig
at oracle.oc4j.admin.management.farm.util.OpmnProxyUtil.invoke(OpmnProxyUtil.java:204)
at oracle.oc4j.admin.management.farm.util.OpmnProxyUtil.invokeSingle(OpmnProxyUtil.java:129)
at oracle.oc4j.admin.management.farm.util.OpmnProxyUtil.invokeSingle(OpmnProxyUtil.java:99)
at oracle.oc4j.admin.management.farm.mbeans.OpmnConfigAgr.getNotificationServerAttrs(OpmnConfigAgr.java:200)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
at oracle.oc4j.admin.jmx.server.state.LocalizationFilterMBeanServer.invoke(LocalizationFilterMBeanServer.java:579)
at oracle.oc4j.admin.management.farm.util.OpmnProxyUtil.invoke(OpmnProxyUtil.java:202) ... 50 more
Caused by: java.io.IOException: Object reference no longer valid (disconnected)
at oracle.oc4j.admin.jmx.client.RemoteMBeanServer.invoke(RemoteMBeanServer.java:820)
at oracle.oc4j.admin.management.farm.mbeans.JVMAgr.invoke(JVMAgr.java:1481)
at sun.reflect.GeneratedMethodAccessor40.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at sun.reflect.misc.Trampoline.invoke(MethodUtil.java:36)
at sun.reflect.GeneratedMethodAccessor18.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585) at sun.reflect.misc.MethodUtil.invoke(MethodUtil.java:239)
at javax.management.modelmbean.RequiredModelMBean.invokeMethod(RequiredModelMBean.java:1071) ... 58
more Caused by: com.evermind.server.rmi.RMIConnectionException: Object reference no longer valid (disconnected)
at com.evermind.server.rmi.RemoteInvocationHandler.invoke(RemoteInvocationHandler.java:60)
at com.evermind.server.rmi.RecoverableRemoteInvocationHandler.invoke(RecoverableRemoteInvocationHandler.java:28)
at com.evermind.server.ejb.StatefulSessionRemoteInvocationHandler.invoke(StatefulSessionRemoteInvocationHandler.java:38)
at __Proxy8.invoke(Unknown Source) at oracle.oc4j.admin.jmx.client.MBeanServerEjbRemoteSynchronizer.invoke(MBeanServerEjbRemoteSynchronizer.java:144)
at oracle.oc4j.admin.jmx.client.RemoteMBeanServer.invoke(RemoteMBeanServer.java:816) ... 68 more

Greetings,
First I would recommend turning up your logging level to FINEST to glean more informatin regarding the error that is occurring. Please post these data along with any related Messaging service configuration information. It is possible that two services are attempting to make the same connection and it is causing one or the other to fail. You might also review the information in your opmn config file. Does the 10.1.2.2 instance remain running during the OC4j restart?
OPMN Configuration:
10.1.20 How to Specify Ports for State Replication in OPMN
When you deploy an application utilizing state replication in a managed Oracle Application Server, OPMN dynamically allocates the ports that are used to propagate state across the cluster. You can restrict this allocation to a range of ports for an application that has peer-to-peer replication enabled. Specifying ports for state replication might be necessary in an installation with a firewall or network that uses a well-defined port range.
To specify a range of ports for peer-to-peer state replication
Add a <port> element to an OC4J instance configuration in the opmn.xml file.
Specify the name of an application that has peer-to-peer replication enabled as the value of the id attribute of the <port> element.
Specify a range of ports in the range attribute of the <port> element.
For example, for deployment of an application named rac-web that is set up for peer-to-peer replication, the line labeled <port id=rac-web .../> in the following OC4J instance configuration tells OPMN to use ports 15213 to 15214 for state replication:
<port id="default-web-site" range="80-100" protocol="http"/>
<port id="rmi" range="12401-12500"/>
<port id="rmis" range="12701-12800"/>
<port id="jms" range="12601-12700"/>
<port id="rac-web" range="15213-15214"/>
For more information about state replication, see Chapter 9, "Application Clustering in OC4J," in the Oracle Containers for J2EE Configuration and Administration Guide.Quoted from:
http://download.oracle.com/docs/cd/B32110_01/relnotes.1013/b32199/oc4j.htm#CEGICDEF-Michael

Oracle Application Server 10.1.3.0.0 OPMN Configuration Assistant Fails Due

I'm in the process of installing Oracle E-Business Suite 12.1 on RHEL.
This is where I'm stuck at: having trouble starting OPMN.
While looking up Metalink, I found Doc ID:ID 422562.1 close to solving my issue.However I'm not sure how to use the solution.
Here's the solution:
1. Install the 32-bit version of glibc-devel-2.3.4-2.19.i686.rpm.
Where can I download this file and any steps to install it would be great?
Note: To install 32-bit packages on a 64-bit system, you may need to use the force option and the nodeps option of the rpm utility.
2. The glibc-devel-2.3.4-2.19.i686.rpm installs the crt1.o into /usr/lib; confirm that this file now exists:
cd /usr/lib
ls -l crt1.o
3. Deinstall this failed installation.
Do I have to deinstall the entire EBS install or just the Oracle AS 10.1.3?
4. Remove contents of /tmp and /var/tmp.
5. Reinstall Oracle Application Server 10.1.3.0.0
How can I reinstall just the Oracle AS 10.1.3?
Please help.

I kindly advice you to move this thread to "Application Server" section of this forum...

Oracle Application server 10.1.2.0.2 Installation error

Please
I am installing OAS on a oracle linux 5
when i get to 86 % of the installation process where it shift to the link page i get an error and to continue i have to ignore several erros
any idea
thank you

I found the solution. I ran the following commands it worked
Any installation of Oracle Application Server 10g Release 2 (10.1.2.0.2) on OEL 5.x or RHEL 5.x in which Reports is getting installed will fail with reports relinking errors unless you apply the required RPM listed below.You may download the RPM package from the following location:
[http://oss.oracle.com/projects/compat-oracle/dist/files/Enterprise_Linux/xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386.rpm]
As root, you can install this RPM package by issuing the ollowing command
# rpm -i xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386.rpm
After the RPM, is installed, you will also need to override the /usr/lib/libXtst.so.6 with the one from /usr/X11R6/lib/libXtst.so.6. As root, issue the commands:
# mv /usr/lib/libXtst.so.6 /usr/lib/libXtst.so.6.ORG
# ln –s /usr/X11R6/lib/libXtst.so.6 /usr/lib/libXtst.so.6
Thanks

Compilation problem in Oracle Application Server (9.0.x)

Hi All,
I have a JSP Page, with more than 200 controls, arranged in a tabs. When I try to run this file under Tomcat or JBoss, it runs fine. But when I run it in Oracle 9iAS (9.0.x), it fails to run. The difference is in the way the servlet is generated from the JSP file. In case of Tomcat and JBoss, the generated java file contains multiple methods for each component, so it runs fine. But in case of Oracle Application Server, the generated file has only one method jspService, which contains all the code. Because of this, the JVM throws an error saying "code too large public void jspService(HttpServletRequest request... ".
Can anyone help me on this issue? Do you know of any configuration setting for the compiler?
Thanks and Regards,
Aniket.

Wich processes don't start? do you have this services in Automatic?
Can you try to pass the to manual, and start the procs suing opmnctl command and check the logs of it?
Regards

Error in Bpel console of oracle application server 10.1.3

Hi everyone,
I am using oracle application server 10.1.3.
I am having an issue in BPEL console of server.the issue is...
After few instances the BPEL process state is going to OFF mode even though I m trying to change its state it is not changing.
How to resolve this issue?
what is the reason behind this issue?
Thanks in advance!!!
Sarala

Hi,
If your bpel process is changing to an OFF state, it means that there is an error.
For example, if you poll a file from a directory, and the file has a bad format, it might change to OFF.
Look at the log files and find out what is the error.
Arik

Oracle application server issue

Similar Messages

Maybe you are looking for