Oracle Application Server Shutdown

I am having a few sites that use Oracle Database and Oracle Application Server.Both are on two dedicated machines.
Database Server Particulars:
OS : Spark Box with Solaris 2.6
Database : Oracle 8.1.5
Application Server :
OS : Spark Box Solaris 2.7
Application Server : Oracle Application Server 4.1.8
The sites that uses these server once in a while in a random fashion becomes unvailable.When we check the status of the database it is fine,but the server with the OAS would be in shuting down.
I am not used to OAS and would like to solve the issue.Is there a way that i can troubleshoot this issue.
Any help would be warmly welcomed.
Thanks and Regards
Michael
DBA

check if ur ORACLE_SID environment variable is set
echo $ORACLE_SID
also check if ur db is up and running..
ps -ef |grep smon
Rgds...R

Similar Messages

TRIALSP11 Application server Shutdown at SAP LOGON

This is my first adventure with SAP or ABAP..
1. I installed and followed the SAPNW2004sABAPTrialSP11 install instructions.
2. The installation instructions went fine from the
/people/manfred.lutz/blog/2007/03/16/new-blog-series-abap-trial-version-for-newbies
3. SAMMMC has MSG_SERVER.exe and DISP_WORK.EXE both green when I stared the SAP Logon.
4. After I start the SAP the waiting for response shows up.
5. SAP GUI comes up with a error saying application server shutdown.
6. my disp+work.exe goes to stopped state.
7. Error message says componet is 710, version 10, return code -17, counter 1.
The Log is attached. Any help is rewarded.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 2192
Fri Jun 29 21:56:47 2007
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2192) [dpxxdisp.c 1239]
Fri Jun 29 21:56:48 2007
 shared lib "dw_xml.dll" version 95 successfully loaded
 shared lib "dw_xtc.dll" version 95 successfully loaded
 shared lib "dw_stl.dll" version 95 successfully loaded
 shared lib "dw_gui.dll" version 95 successfully loaded
 shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Jun 29 21:56:52 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >kiranmtop_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 059B0040, size: 4205552)
DpShMCreate: allocated sys_adm at 059B0040
DpShMCreate: allocated wp_adm at 059B1A28
DpShMCreate: allocated tm_adm_list at 059B32E0
DpShMCreate: allocated tm_adm at 059B3310
DpShMCreate: allocated wp_ca_adm at 05D235A0
DpShMCreate: allocated appc_ca_adm at 05D23A50
DpShMCreate: allocated comm_adm at 05D23F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05DA4DB0
DpShMCreate: allocated gw_adm at 05DA4DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05DA4E20
DpShMCreate: allocated wall_adm at 05DA4E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Jun 29 21:56:53 2007
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
Fri Jun 29 21:56:54 2007
***LOG Q0K=> DpMsAttach, mscon ( kiranmtop) [dpxxdisp.c 11663]
Fri Jun 29 21:56:55 2007
DpStartStopMsg: send start message (myname is >kiranmtop_NSP_00 <)
DpStartStopMsg: start msg sent
Fri Jun 29 21:56:56 2007
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Fri Jun 29 21:57:35 2007
ERROR => W0 (pid 2268) died [dpxxdisp.c 14318]
ERROR => W1 (pid 2276) died [dpxxdisp.c 14318]
ERROR => W2 (pid 2284) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9f --> 0x9e
ERROR => W3 (pid 2292) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9e --> 0x9c
ERROR => W4 (pid 2300) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9c --> 0x98
ERROR => W5 (pid 2308) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x98 --> 0x90
ERROR => W6 (pid 2316) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x90 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jun 29 21:57:45 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Sat Jun 30 04:57:45 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2268 Ended no 1 0 0
1 DIA 2276 Ended no 1 0 0
2 DIA 2284 Ended no 1 0 0
3 UPD 2292 Ended no 1 0 0
4 ENQ 2300 Ended no 1 0 0
5 BTC 2308 Ended no 1 0 0
6 SPO 2316 Ended no 1 0 0
Dispatcher Queue Statistics Sat Jun 30 04:57:45 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 7, udp 4 ( 57%), shm 3 ( 42%)
since last update total 7, udp 4 ( 57%), shm 3 ( 42%)
Dump of tm_adm structure: Sat Jun 30 04:57:45 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T7, U8, , kiranmtop, 21:57:24, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Sat Jun 30 04:57:45 2007
=============================
Slots: 20, Used: 2, Max: 1
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
1
DISPATCHER
-1
WPCAAD001
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jun 29 21:57:50 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >kiranmtop_NSP_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2252) (SOFT_KILL)
Stop icman
killing process (2260) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 7
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/20/7
LOCK WP ca_blk 2
return errno (-17) to T7
errormsg without overhead: take mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
try to send 14 to M0
NiBufSend starting
NiIWrite: hdl 5 sent data (wrt=14,pac=1,MESG_IO)
REL WP ca_blk 2
set status of T7 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 5 in set0
SiSelNSet: set events of sock 1508 to: ---
NiBufISelRemove: remove hdl 5 from set0
SiSelNRemove: removed sock 1508
NiSelIRemove: removed hdl 5
DpDelSocketInfo: del info for socket 5 (type=3)
NiICloseHandle: shutdown and close hdl 5 / sock 1508
NiBufIClose: clear extension for hdl 5
dp_tm_adm[7].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1183179475/922000
Fri Jun 29 21:57:51 2007
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 7
DpListInsert: insert elem 7 into tmadm_free_list (at begin)
DpListInsert: 194 elems in tmadm_free_list
DpListRemove: remove elem 7 from tmadm_inuse_list
DpListRemove: 7 elems in tmadm_inuse_list
wait for end of work processes
wait for end of gateway
[DpProcDied] Process died (PID:2252 HANDLE:1592)
wait for end of icman
[DpProcDied] Process lives (PID:2260 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jun 29 21:57:52 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2260 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jun 29 21:57:53 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2260 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jun 29 21:57:54 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2260 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jun 29 21:57:55 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2260 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jun 29 21:57:56 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2260 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jun 29 21:57:57 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2260 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jun 29 21:57:58 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2260 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jun 29 21:57:59 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2260 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jun 29 21:58:00 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2260 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jun 29 21:58:01 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2260 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jun 29 21:58:02 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2260 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jun 29 21:58:03 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2260 HANDLE:1608)
DpStartStopMsg: send stop message (myname is >kiranmtop_NSP_00 <)
NiIMyHostName: hostname = 'kiranmtop'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Fri Jun 29 21:58:04 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11976]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1556 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1556 (pos=2)
SiSelNRemove: removed sock 1556
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/20/7
LOCK WP ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1556
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2192) [dpxxdisp.c 10333]
Good Bye .....

Hi Russell,
I am also facing the same problem as Kiran.
I have attached dev_w0 file, with this msg.
can you please tell me where the problem lies?
=============================================================
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Sun Jul 01 18:13:56 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\TEK\SYS\exe\run\dboraslib.dll' ...
B Library 'C:\usr\sap\TEK\SYS\exe\run\dboraslib.dll' loaded
B Version of 'C:\usr\sap\TEK\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.112)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 251
M intno 20020600
M pid 3464
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3464) [dpxxdisp.c 1016]
I MtxInit: -2 0 0
X
X Sun Jul 01 18:13:58 2007
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Sun Jul 01 18:14:07 2007
M calling db_connect ...
C Got ORACLE_HOME=C:\oracle\ora81 from environment
C
C Sun Jul 01 18:14:12 2007
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPTEK's password
C Connecting as /@TEK on connection 0 ...
C Attaching to DB Server TEK (con_hdl=0,svchp=06AA97F8,svrhp=06AA9604)
C
C Sun Jul 01 18:14:13 2007
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
[dboci.c 3566]
C *** ERROR => CONNECT failed with sql error '12541'
[dboci.c 9536]
C Try to connect with default password
C Connecting as SAPTEK/<pwd>@TEK on connection 0 ...
C Attaching to DB Server TEK (con_hdl=0,svchp=06AA97F8,svrhp=06AA9410)
C
C Sun Jul 01 18:14:14 2007
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
[dboci.c 3566]
C *** ERROR => CONNECT failed with sql error '12541'
[dboci.c 9536]
B ***LOG BY2=> sql error 12541 performing CON [dbsh#2 @ 962] [dbsh 0962 ]
B ***LOG BY0=> ORA-12541: TNS:no listener [dbsh#2 @ 962] [dbsh 0962 ]
B ***LOG BY2=> sql error 12541 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-12541: TNS:no listener [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1098]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8277]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sapsrv_TEK_00 on host sapsrv (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Sun Jul 01 18:14:14 2007
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8408
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 235]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3464) [dpnttool.c 345]

Doubt in Oracle application server release3

Hi,
I am new to Oracle Application Server 10g. i heard that in Oracle Application Server 10g release 3 its come up with by default SSL where in release 2 its comes with by default with out SSL config. is it true please clarify me. if so how to remove the ssl in release 3 as i was trying to install Hyperion products on top of Oracle Application server facing some problems with SSL.
Regards
KumarK

Hi Roberto,
I did opmnctl reload and it got sucessfull and the opmnctl log showing
9/04/06 08:58:11 [pm-requests] Request 2 Completed. Command: /start
09/04/06 09:40:04 [pm-internal] OPMN server stopped. Request handling disabled.
09/04/06 09:40:04 [pm-requests] Request d Started. Command: /reload
09/04/06 09:40:04 [pm-scheduler] Pm/Ons confirm notification timeout
09/04/06 09:40:05 [internal] Logging disabled
09/04/06 09:40:06 [ons-internal] ONS server initiated
09/04/06 09:40:06 [pm-internal] PM state directory exists: E:\Oracle\product\10.1.3.1\OracleAS_1\opmn\logs\states
09/04/06 09:40:06 [pm-internal] OPMN server ready. Request handling enabled.
09/04/06 09:40:14 [pm-internal] OPMN server stopped. Request handling disabled.
09/04/06 09:40:14 [pm-requests] Request 2 Started. Command: /shutdown
09/04/06 09:40:14 [pm-process] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1919618309:2904)
09/04/06 09:40:14 [pm-process] Stopping Process: default_group~home~default_group~1 (1919618310:1244)
09/04/06 09:40:18 [pm-process] Process Stopped: HTTP_Server~HTTP_Server~HTTP_Server~1 (1919618309:2904)
09/04/06 09:40:18 [pm-requests] Request 2 Completed. Command: /shutdown
09/04/06 09:40:18 [pm-requests] Http 2
OC4j4HYPERION.sbtapps006~HTTP_Server~HTTP_Server~HTTP_Server~1919618309:2904
Status: Stopped
Operation: request (success)
ErrFile: E:\Oracle\product\10.1.3.1\OracleAS_1\opmn\logs\\HTTP_Server~1.log
OC4j4HYPERION.sbtapps006~default_group~home~default_group~1919618310:1244
Status: Stopped
Operation: request (success)
ErrFile: E:\Oracle\product\10.1.3.1\OracleAS_1\opmn\logs\\default_group~home~default_group~1.log
09/04/06 09:40:18 [pm-process] Process Stopped: default_group~home~default_group~1 (1919618310:1244)
09/04/06 09:40:20 [pm-scheduler] Pm/Ons confirm notification timeout
09/04/06 09:40:21 [internal] Logging disabled
09/04/06 09:40:22 [ons-internal] ONS server initiated
09/04/06 09:40:22 [pm-internal] PM state directory exists: E:\Oracle\product\10.1.3.1\OracleAS_1\opmn\logs\states
09/04/06 09:40:22 [pm-internal] OPMN server ready. Request handling enabled.
09/04/06 09:40:22 [pm-requests] Request 2 Started. Command: /start
09/04/06 09:40:22 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1919618311:0)
09/04/06 09:40:22 [pm-process] Starting Process: default_group~home~default_group~1 (1919618312:0)
09/04/06 09:40:23 [pm-process] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (1919618311:2716)
09/04/06 09:40:27 [pm-process] Process Alive: default_group~home~default_group~1 (1919618312:316)
09/04/06 09:40:27 [pm-requests] Request 2 Completed. Command: /start
HTTP server log
Oracle-Application-Server-10g/10.1.3.1.0 Oracle-HTTP-Server running...
09/04/06 09:40:22 Start process
Service.log
09/04/06 09:40:14 shutdown
09/04/06 09:40:22 startproc
default_group~home~default_group~1.log
09/04/06 09:40:22 Start process
09/04/06 09:40:27 Oracle Containers for J2EE 10g (10.1.3.1.0) initialized
( i am very new to ORAS, i am trying to deploy Hyperion on ORAS. sorry to pain you people)
Regards
KumarK.

SAP Gui Logon - application server shutdown

Hi!
I'have installed SAP Netweaver 7.0 Abap TRIAL on my Windows XP Service Pack 3.
After lunching NSP-->Start Application Server, all is ok.
But when i try to Logon with Sap Gui 7.10, i get this error :
application server shutdown
Component DPTM
Release 710
Version 10
Return Code -17
Counter 1
Could you please help me?
Thanks a lot!

Hi!
MaxDB seems to start correctly :
http://www.fabiocavallo.it/sap/maxdb.jpg
...here comes dev_w0 :
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu May 22 19:58:50 2008
B create_con (con_name=R/3)
B Loading DB library 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll) Error 126 [dlnt.c 237]
M Error 126 = "Impossibile trovare il modulo specificato."
B *** ERROR => Couldn't load library 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll'
[dbcon.c 4726]
M sysno 00
M sid NSP
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 95
M intno 20050900
M make: multithreaded, ASCII, optimized
M pid 3376
M
M kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3376) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Thu May 22 19:58:51 2008
M DpShMCreate: sizeof(wp_adm) 6328 (904)
M DpShMCreate: sizeof(tm_adm) 3605136 (17936)
M DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
M DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
M DpShMCreate: sizeof(comm_adm) 528048 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1280)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06420040, size: 4205552)
M DpShMCreate: allocated sys_adm at 06420040
M DpShMCreate: allocated wp_adm at 06421A28
M DpShMCreate: allocated tm_adm_list at 064232E0
M DpShMCreate: allocated tm_adm at 06423310
M DpShMCreate: allocated wp_ca_adm at 067935A0
M DpShMCreate: allocated appc_ca_adm at 06793A50
M DpShMCreate: allocated comm_adm at 06793F00
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06814DB0
M DpShMCreate: allocated gw_adm at 06814DF0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06814E20
M DpShMCreate: allocated wall_adm at 06814E28
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host PCFABIO
M
M Thu May 22 19:58:52 2008
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll) Error 126 [dlnt.c 237]
M Error 126 = "Impossibile trovare il modulo specificato."
B *** ERROR => Couldn't load library 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll'
[dbcon.c 4726]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 008192) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10240]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server PCFABIO_NSP_00 on host PCFABIO (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu May 22 19:58:52 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10439
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3376) [dpnttool.c 327]
Thanks again, Sergo!
Regards.
Fabio

How to integrate Oracle Portal running on Oracle Application Server 10.1.2

I have an Oracle Portal running on a Oracle Application Server 10.1.2.
Portal is responsible ( along with OID ) for the users authentication and authorization.
There is a new JEE application that was developed recently, which the Portal users must have access to.
HOW can I put a link into a page of the Portal, that redirects the portal user to a new browser window displaying my new application?
HOW can this new application, running in a separate weblogic 11g (10.3.5) server, automatically authenticate with the same username/password previously authenticated when the user logged into the portal?
Any ideas?
I´ve already thought in a bunch of ways to do it:
- put a link into the portal with a sessionId, then when opening the new app, it automatically tries to use the same session. How can I configure this session id during the creation of the portal's page? How can I use it from the new app to use the same session?
- put a link into the portal with a userid, then when opening the new app, it automatically tries to authenticate using a different authentication provider configurated in WL, which points to Portal´s OID. In this situation, how can I ensure that the user is already logged in and the session has not timed out?
- Should I use OSSO?
- Should I use OAM?
Any help would be appreciated!
Murilo

Hi Murilo,
A portletized version of your J2EE app would probably have been ideal for your purpose as it would handle both authentication (through SSO) and session information (through Portal framework as the framework can pass session information to the provider/producer). This would require changes to the application however.
Easiest approach would be to use mod_osso to protect your J2EE application. SSO would then handle the authentication for your Portal and your J2EE application.
Thanks,
EJ

Developing for a Oracle Application Server with SSO

Hello there,
I'm developing an application (Java) that will be deployed as a partner application within an Oracle Application Server 10g at my client. This Oracle instance has a SSO already configured, and my app will use this Identity Manager (consuming the cookie). The problem is that at my company we don't have a SSO system configured, not even an Oracle Application Server, just a simple Oracle XE 10g to hold data. So I'm wondering how can I do to develop my application and test it.
I was looking forward to install an OAS and configure an SSO to validate my implementation, but the download link provided by Oracle is broken (http://www.oracle.com/technology/products/ias/index.html). Another alternative that I thought of was to install an OC4J and configure a Java SSO to simulate the behavior of OSSO, and make my app the cookie set by it. But OC4J supports only til Servlet 2.4 and my app is using 2.5...
And to complete, I cannot access my client's environment. I'm supposed to write a Deploying document telling him how to deploy my app and then try to access it through Internet.
Does anyone have an idea of how can I develop and test my app in my company's environment?
Thanks in advance,
Bruno Krebs.

Apache 2.0 based OHS is located in Oracle Application Server Companion CD.
Pavna

Oracle application server release 2

hi
i am trying to download oracle 10g application server Release2 from the link
http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
but everytime when it starts downloading,it remains on 0% only..
is there any other link by wich i can download the oracle application server release2.....plz help

hi
install download manager and after that try to download application server.
sarah

Oracle Application Server Release 2 (10.1.2) Deployment Notes question

Hi!
I'm following the Oracle Application Server Release 2 (10.1.2) Deployment Notes (http://download-uk.oracle.com/docs/html/B25947_01/deployment_topics006.htm) for deploying an application, built in Jdeveloper 10.1.3 to AS 10.1.2. I have a question about Configuring JDeveloper to Generate Configuration Files That Are J2EE 1.3-Compliant. Do I need all the files in table 34-3? (http://download-uk.oracle.com/docs/html/B25947_01/deployment_topics006.htm#CIHHBJAI)
I already have some of these files. Can I change the version of existing files or do I need new ones? How can I change the version of existing files?
Here are the headers of some of these files:
web.xml: (Here I probably just change version="2.4" to version="2.3")
<?xml version = '1.0' encoding = 'windows-1250'?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
 xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
 version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee">
orion-application.xml: (Is version="10.0" the version I need to change to "1.2"?)
<?xml version = '1.0' encoding = 'windows-1252'?>
<orion-application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
 xsi:schemaLocation="http://www.oracle.com/technology/oracleas/schema http://xmlns.oracle.com/oracleas/schema/orion-application-10_0.xsd"
 version="10.0"
 xmlns="http://www.oracle.com/technology/oracleas/schema">
data-sources.xml.xml: (This file has only XML version, I don't believe this is the version I need to change)
<?xml version = '1.0' encoding = 'windows-1250'?>I only have these three files from the table in my application. Do I need application.xml and oc4j-connectors.xml too?
Thank you in advance!
BB

Found some more details on this error in emias.log:
2007-11-21 09:22:54,538 [EMUI_09_22_54_/console/ias/oc4j/deployWiz/webModuleMappings$ctxType1=oracle*_ias$target=MY_AS_INSTANCE*_home$type=oc4j$ctxName1=MY_AS_INSTANCE$selectedStep=1]
ERROR ias.oc4j doWebModulesNavigation.920 - DeployWiz: Caught exception in doWebModulesNavigation
2007-11-21 09:23:49,054 [Thread-24] ERROR ias.oc4j doDeployWork.2628 - DeployWiz: Caught exception in doDeploy
java.lang.NoClassDefFoundError: oracle/dms/instrument/CorrelationContext
at oracle.ias.sysmgmt.task.TaskMaster.setContextECID(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.evaluate(Unknown Source)
at oracle.ias.sysmgmt.deployment.j2ee.console.ApplicationDeployment.deployCommon(Unknown Source)
at oracle.ias.sysmgmt.deployment.j2ee.console.ApplicationDeployment.deploy(Unknown Source)
at oracle.ias.sysmgmt.deployment.j2ee.console.EarDeployerImpl.deploy(Unknown Source)
at oracle.sysman.ias.sta.oc4j.DeployAppAdminObj.deploy(DeployAppAdminObj.java:164)
at oracle.sysman.ias.sta.oc4j.DeployWiz.doDeployWork(DeployWiz.java:2594)
at oracle.sysman.ias.sta.oc4j.DeployWiz.access$000(DeployWiz.java:179)
at oracle.sysman.ias.sta.oc4j.DeployWiz$DeployBean.doWork(DeployWiz.java:3098)
at oracle.sysman.emSDK.eml.util.iAS.ProcessingBean$ProcessingThread.run(ProcessingBean.java:264)
at java.lang.Thread.run(Thread.java:534)
2007-11-21 09:23:49,054 [Thread-24] ERROR ias.IASUtil displayError.753 -
java.lang.NoClassDefFoundError: oracle/dms/instrument/CorrelationContext
at oracle.ias.sysmgmt.task.TaskMaster.setContextECID(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.evaluate(Unknown Source)
at oracle.ias.sysmgmt.deployment.j2ee.console.ApplicationDeployment.deployCommon(Unknown Source)
at oracle.ias.sysmgmt.deployment.j2ee.console.ApplicationDeployment.deploy(Unknown Source)
at oracle.ias.sysmgmt.deployment.j2ee.console.EarDeployerImpl.deploy(Unknown Source)
at oracle.sysman.ias.sta.oc4j.DeployAppAdminObj.deploy(DeployAppAdminObj.java:164)
at oracle.sysman.ias.sta.oc4j.DeployWiz.doDeployWork(DeployWiz.java:2594)
at oracle.sysman.ias.sta.oc4j.DeployWiz.access$000(DeployWiz.java:179)
at oracle.sysman.ias.sta.oc4j.DeployWiz$DeployBean.doWork(DeployWiz.java:3098)
at oracle.sysman.emSDK.eml.util.iAS.ProcessingBean$ProcessingThread.run(ProcessingBean.java:264)
at java.lang.Thread.run(Thread.java:534)
2007-11-21 09:23:49,054 [Thread-24] ERROR util.iAS displayError.369 - An internal error occurred during the operation.
java.lang.NoClassDefFoundError: oracle/core/ojdl/query/LogQueryException
at oracle.sysman.ias.sta.oc4j.DeployWiz.removeAdminObjectsFromCache(DeployWiz.java:2708)
at oracle.sysman.ias.sta.oc4j.DeployWiz.doDeployWork(DeployWiz.java:2648)
at oracle.sysman.ias.sta.oc4j.DeployWiz.access$000(DeployWiz.java:179)
at oracle.sysman.ias.sta.oc4j.DeployWiz$DeployBean.doWork(DeployWiz.java:3098)
at oracle.sysman.emSDK.eml.util.iAS.ProcessingBean$ProcessingThread.run(ProcessingBean.java:264)
at java.lang.Thread.run(Thread.java:534)

SSL test in Oracle Application Server 10.1.2

Hi ,
we are using one Oracle Application Server Web Cache 10.1.2 as our web server.This redirects users to the Application Server.(EBS 12.0.4)
Now we need to implement SSL to secure user credentials.So i am planing to implement SSL in our web cacahe server.Will this be enough to secure user credentials??I dont have any idea.Please help.
Moreover our web cache is not configured in SSL during the time of installation.Can any body suggest me a place from where i could get one demo Certificate to put it onto my web server and test the SSL confiration.EBS has provided one demo for application tier(inside $ORACLE_HOME/apache/certs/).
But we will have to implement in web cahe tier not in application tier.
We are using EBS 12.0.4 in Hp-Ux v11.23.

Hi susmit;
Please chekc below note which could be helpful for your issue:
SSL Primer on Using OpenSSL as a Certificate Authority with E-Business Suite (with a Windows Example) [ID 1175193.1]
Enabling SSL in Release 12 [ID 376700.1]
R12.0.6+ : Oracle Application Object Library SSL Test Transaction Data Test [ID 732282.1]
R12.0.[3-4] : Oracle Application Object Library SSL Test Transaction Data Test [ID 564066.1]
Regard
Helios

Apex Listener vs. Oracle Application Server... advantages?

Are there advantages to installing Apex Listener over using an existing Oracle Application Server instance to serve Apex applications?
We have an existing application server instance in production. Would introducing Apex Listener and the extra overhead be of any advantage?
Thanks in advance for your thoughts.

Hello "Portal Dude",
Are there advantages to installing Apex Listener over using an existing Oracle Application Server instance to serve Apex applications?APEX Listener introduces some additional features, such as Resource Templates, but lacks some others. Some people might want to migrate from OAS to another JEE Container that doesn't come along with a OHS/mod_plsql. Depending on the JEE Container, you could use AJP for load balancing, avoiding plain HTTP through a firewall, etc.
Would introducing Apex Listener and the extra overhead be of any advantage?The "extra overhead" may be smaller than you think. If you don't need the HTTP_Server component any longer, but can just deploy APEX Listener on the OC4J of your OAS, you might even save some bytes.
For several other aspects, there have been a few posts on that topic in the past:
{thread:id=1100122}
{thread:id=1555908}
{thread:id=1594158}
If there's anything you don't find in either the posts or the documentation, don't hesitate to ask.
-Udo

Discoverer Plus associate with the Oracle Application Server Infrastructure

Hi Everyone,
I just install the Oracle BI (v 10.1.2.0.2) into my 2003 server so I could use the Discoverer Plus and Viewer. This is a stand alone BI installation (I guess, I have little knowledge about Discoverer plus or Oracle AS).
My question is how could I connect the Discoverer plus to my ODS database, so I could create report or view report.
and where to find the Oracle Application Server Infrastructure (or How do I know I have the Oracle Application Server Infrastructure?)
I read the Oracle BI Discoverer Configuration Guide, and it tell me to associate the Oracle BI with the Oracle Application Server Infrastructure to deploy the Discoverer. so I went to the BI Application Server Control page, the Infrastructure section, the Identity Management to configure the Internet Directory, so I could I have the public connection, but it didn't work.
Also do I real need the Oracle AS Infrastructure to make the Discoverer Plus work?
Thanks in advance
Kevin C
Kevin
Edited by: cmingl on Feb 11, 2010 1:30 PM

Hi Kevin,
Oracle AS Infrastructure is needed only if you are implementing SSO for Discoverer or using Public connection .
Else only Oracle AS Middle tier is sufficient to work with Discoverer Plus .
Regarding "how could I connect the Discoverer plus to my ODS database, so I could create report or view report"
You need to create the End User Layer (EUL) and then grant privilege to the EUL to users who will be creating the report .
Thanks,
Sutirtha

Client-cert auth impl in web.xml does not work in Oracle Application Server

Hi,
I am new to implementing security features on the web applications.. I have developed a new web service using jdev1012 and deployed in OAS 10.1.2. Its working fine according to the business requirements, but I am in need of implementing client-cert authentication to enable the web service available to only those who have client certificate.
My server details are:
Oracle Application Server 10g Release 2 (10.1.2)
Server certificate is in place and SSL mode have been already enabled.. able to access my web service through https://<mydomain.com>/myws/TreqWS as well able to see the WSDL file through https://<mydomain.com>/myws/TreqWS?WSDL.
I tried to include the following in my web.xml file as part of implementing CLIENT-CERT authentication.
<security-constraint>
<display-name>SecurityConstraint</display-name>
<web-resource-collection>
<web-resource-name>WSCollection</web-resource-name>
<url-pattern>/*</url-pattern>
</web-resource-collection>
<user-data-constraint>
<transport-guarantee>CONFIDENTIAL</transport-guarantee>
</user-data-constraint>
</security-constraint>
<login-config>
<auth-method>CLIENT-CERT</auth-method>
<realm-name>WSCollection</realm-name> 
</login-config>
It is not woking as expected, though I have restarted my oc4j container after including this content to the web.xml file. i.e, I am able to invoke the web service though my sample java client program, though I donot have client certificate/keystore.
I believe I am missing something..Can anyone help me in this regard to implement CLIENT-CERT authentication successfully?
Thanks,
Ms

I am having the same problem with doc and xsl. I have added this
<mime-mapping>
<extension>xls</extension>
<mime-type>application/vnd.ms-excel</mime-type>
</mime-mapping>
<mime-mapping>
<extension>doc</extension>
<mime-type>application/msword</mime-type>
</mime-mapping>
to my web.xml. I even restarted the server. I still see doc and xsl in binary.
Is there some other setting that needs to take place?
I am using WL6.1 with fixpack 1.
I can see the doc and excel files in the browser if I don't go through the weblogic
server. That just confirms it's not my browser.
Kumar Allamraju <[email protected]> wrote:
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
It works fine for me in 6.1 SP1.
 
If the following doesn't work , can you
 try application/winword instead of application/msword?
--
 Kumar
Siming Mu wrote:
<blockquote TYPE=CITE>Hi,
I setup in my web.xml a mime mapping as follows,
<mime-mapping>
 <extension>doc</extension><mime-type>application/msword</mime-type>
 </mime-mapping>
When I specify a test.doc url, the doc file appears in my browser
as
binary data
 instead of download.
Please reference change request 055002, which decribes this problem.
According
 to edocs, it has been fixed in wls6.1sp1.
But I am seeing it fixed. Am I doing anything wrong? Thanks.
Siming</blockquote>
</html>

Client printer on oracle application server

Hi all.
I configured my own system on oracle application server and I connected my printer on client machine.
When I wanted to print through the application server on the printer I did not print.
Please could anyone shows me where is the error file (for the printer) located in oracle application server to check the error.
by

No. Not only it isn't certified, but it is also impossible to run forms compiled with the 11g compiler with the 10g runtime. For 11g there is a install bundle for the developer suite / application server.
cheers

How to install Oracle Report Services in Oracle Application Server 10.1.3.1

My project is running on Oracle Application Server(OAS) 10.1.3.1, and I need to develop some Oracle Reports for my client.
But I find out there is not "Oracle Report Services" component in OAS 10.1.3.1 like OAS 10.1.2.
Is there Oracle Report Services for OAS 10.1.3.1? How to get it?

Max Yuan wrote:
You mean I need to install 2 OAS(10.1.2 for report, 10.1.3 for my project), or deploy my project to 11g? For the Reports reporting project, you'll need a version/edition that includes AS Reports Services.
In "10gr2" that means AS 10.1.2.0.2 (plus Patch set): AS Infrastructure + AS BI&Forms installation (enterprise edition) or the standalone Forms and Reports installation (EE or separate licensing). You also need the Developer Suit (Reports Builder). OFM "11gr1" suite has some version of Reports Services but I don't know the available packages and installation types.

Oracle Application Server 10.1.3.5 and SSL

Hi,
We want to use SSL in combination with Oracle Application Server 10.1.3.5. I installed Oracle Application Server 10.1.3.5 on Windows 2008R2 64 bit. After that I installed 64 bit java(jdk-6-26-windows-x64.exe) to run jvm in 64bit. I'm facing the following problem. The wallet manager won't run on Windows 2008R2 64bit because we're using 64bit jdk. There is also a commandline version; mkwallet. When I start this up it says "Oracle Wallet Commandline tool for 32bit Windows" I also can't create a certificate or certificate request. When I install a 32bit java version I also get a different JAVA_HOME, and that I don't want.
What if I install Oracle Application Server 10.1.3.5 on a 32bit OS and use there also a 32bit jdk, then use wallet manager to generate a certificate? Can I than use this wallet on the 64bit windows and 64bit jdk?
What other options are there available in this situation to use SSL? Is for example keytool from java an option?
Kind regards,
Herman
Edited by: user1950921 on 21-nov-2011 3:59

Hi,
Here an update on this situation. I installed Oracle SOA Suite 10.1.3.5 on Windows 2008r2 64bit in a seperate environment. After that I installed the 32bit version of the jdk we used in the test and production environment. In the seperate environment I can startup Oracle Wallet Manager. Here I created a certificate request and then import the reply certificates from the CA. Then the wallet says "Certificate ready". In the directory where the wallet is, I put the certificate request, and the reply certificates. After that I copy the wallet-directory to the test environment(with a 64bit jdk) and in the ssl.conf file I point to the copied wallet-directory. After a restart of the app-server I got SSL.
Edited by: user1950921 on 2-dec-2011 0:11

Oracle Application Server Shutdown

Similar Messages

Maybe you are looking for