Oracle Applications Install on AMD chipset

Hi,
Has anyone tried installing Oracle Applications 11i (11.5.3 and
beyond) on AMD chipset (not on Intel Pentium). I am planning to
have a fresh install of 11i (11.5.5) on AMD chipset. Would
appreciate any relevant information.
Thank you,
Rajesh Gupta

Apps install docs can be found at http://www.oracle.com/technology/documentation/applications.html
Depending on which version of R12 you are installing on which version of RHEL, these MOS Docs will have additional information
761566.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64
761564.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86
416305.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.0.4) for Linux (64-bit)
555874.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.0) for Linux (32-bit)
HTH
Srini

Similar Messages

Backup fails for a Hyper-V guest with VSS Writer failures using DPM 2012 R2 - Hyper-V guest has Oracle application installed,

I am trying to backup a VM which before it had Oracle installed backed up with no problems. It is a Windows 2008 R2 server which sites on an 8 node Hyper-V 2012 R2 cluster (with CSVs). I am using DPM 2012 R2 to run the backups which have been
successful for the last few weeks but then Oracle was installed and the backups have failed since then.
The job fails and a large number of VSS writers go into a 'Failed' state with the 'Last Error' showing as 'Timed out'. I then get 4 popups appear each referring to a 'temporary' drive which appears briefly in Disk Management with a RAW file system.
These pops say "You need to format the disk in drive X: before you can use it. Do you want to format it?" (where
X: is replaced by the drive letter assigned to each 'temporary' drive).
The System event log is populated with a large number of warnings with Event 51, Disk, stating "An error was detected on device \Device\Harddisk<number>\DR<number> during a paging operation". There are also a
few warnings for Ntfs (eventid 57) stating that "The system failed to flush data to the transaction log. Corruption may occur."
Prior to these warnings there are 5 other warnings for partmgr (eventid 58) stating "The disk signature of disk
<number x> is equal to the disk signatuire of disk <number y>" and 4 errors (eventid 1, VDS Basic Provider), "Unexpected failure. Error code: 490@01010004".
There is a script which is run to stop the Oracle application on the server and if this is run then the backups will complete successfully. We have been troubleshooting this by running a certain amount of the script and seeing which part affects the
backup and it seems that if the Weblogic (wls_reports) service is stopped then the backup will succeed but if it is running then the backup will fail and the above symptoms occur.
Another point which may help is that there is a pre-production server which resides on a Windows 2008 R2 Hyper-V standalone server, has the same scripts and installation of Oracle but backs up without any issues.
I have experienced VSS writer failures before with VM backups but I have not seen this before. It is not intermittent and I can find no work around to alleviate the problem of having no backup (except stopping this service or shutting the server down,
but as it is a production server this is not practical).
If anyone has experienced this before or have any suggestions / advice it would be much appreciated.
Thanks
Chris

Hi Chris
I have exactly the same issue.
2008 R2 Server running Oracle
6 node 2012 R2 Hyper-V Cluster with CSV
Exact same errors and popup "format disk" message.
DPM2012 R2
I also have some other VM's on the same cluster which do back up through DPM
The only difference I can see is the server which has the issue has a legacy network adapter.
Production server so cannot make any changes until later but will add new adapter and report back.
Interesting about the Weblogic service, may test this also.
Cheers
Kev.

What versions of Oracle Application Server suite to install on Windows 2008

Hello everyone!
Now I want to install Oracle Application Server on Windows Server 2008.
I downloaded 10.1.3.1.0 SOA suite, and also downloaded the patchset for 10.1.3.4, I'm working on windows server 2008,its version is 6.0. and 11g database release(11.1.0.6.0)(installed).
But when I try to install SOA suite, it give me error on 1st screen of universal installer as “checking operating system version: must be 5.0,5.1 or 5.2. actual 6.0 failed<<<< Press enter to exit”.
And when I try to install patchset for 10.1.3.4. It does not show any version problem,but it give me a Error message “There are no patches that need to be applied from the patchset oracle app server patchset 10.1.3.4.0 “,after screen “Specify file locations”.
Please tell me how to install successfully what kind of Oracle AS on Windows Server 2008!
Thanks so much!

Please see the following note on Metalink for most updated Certification Matrix for the OS, your machine and Oracle AS products.
Note Id: 742649.1
If you are using an AMD 64bit machine, then paritcularly check line 88. If you have an intel, see particularly 125 and 126 to see the relevant patches to be applied before installation of your type of AS software.
hope that helps!
AMN

Upgrading Application Express on Oracle XE (installed on Ubuntu 8.04)

I'd installed on my laptop (OP is Ubuntu 8.04) Oracle XE and is wotking quite fine.
But I really like to upgrade apex to last version (3.1.2). I read documentation but are not many information about how to upgrade.
Daniel

Thanks Arie,
On whatever version of Windows I've updated without problems Application Express.
I'm talking here about Ubuntu (a debian distribution of Linux).
My problem is where to unzip apex, where to use sqlplus command prompt etc., because is different than Windows.
If you don't have DBA rights on the account (user account other than root) you have errors in installation process and more.
For example they say in doc...:0
"To run the apxconf.sql configuration script:
1. Change your working directory to ORACLE_BASE\ORACLE_HOME\apex or whatever convention used to indicate the Oracle home.
2. Start SQL*Plus and connect to the database where Oracle Application Express is installed as SYS. For example:
* On Windows:
SYSTEM_DRIVE:\ sqlplus /nolog
SQL> CONNECT SYS as SYSDBA
Enter password: SYS_password
* On UNIX and Linux:
$ sqlplus /nolog
SQL> CONNECT SYS as SYSDBA
Enter password: SYS_password".....
When you install Oracle what version you need, OP (Linux) create a different user account for Oracle. Usually if you want to use your account like dba for oracle, you need to give to that account the proper rights.
So, I need a installation rutine (for upgrading) for apex on Linux.

Problem with apex listener install on Oracle Application Express 4.2.3

I have installed Oracle Application Express 4.2.3
Then i tried to install apex listener Oracle APEX Listener 2.0.5
but it dos not work.
I ask
It is possibile to install WebLogic Server 12c or 11c
and connect it to apex ??

Hi;
Please check Deploying Sun JRE (Native Plug-in) for Windows Clients in Oracle E-Business Suite Release 12 [ID 393931.1] and compare it wiht your steps
Regard
Helios

Need help on installing Oracle Application express 3.2

Hi,
I had downloaded Oracle 11g database and installed the personal edition.I got the Enterprise manager login page working and also the DBConsole
I had Downloaded APEX 3.2 and wanted to install apex 3.2.I wanted to do the following scenario
Scenario 3: Install from the Database and Configure the Embedded PL/SQL
Gateway
Planning to do these steps: ( I have few questions on these steps and are below each step)
■ Running the apxconf.sql Configuration Script
Do I have to install Oracle Application express or is it already installed in 11g personal edition?
Do I have to create a seperate database or schema for this step( I have only one instance orcl1) ?■ Verifying the Oracle XML DB HTTP Server Port
Can I do this step in my current orcl1 instance,if so which user■ Enabling Oracle XML DB HTTP Server
Once I carry out these steps, Can I access the admin page for apex with https://localhost:port/apex_admin ?
Am I missing any other steps ?
Thanks

I have one idea..
Try to install again:
1) download and unzip apex_3.2 in $ORACLE_HOME
You will have:
$ORACLE_HOME/apex - old directory
$ORACLE_HOME/apex_3.2 - new directory
2) in command line go to $ORACLE_HOME/apex_3.2/apex
run sqlplus "/as sysdba"
in sqlplus run @apexins tablespace_apex tablespace_files tablespace_temp images
Where:
tablespace_apex is the name of the tablespace for the Oracle Application Express application user.
tablespace_files is the name of the tablespace for the Oracle Application Express files user.
tablespace_temp is the name of the temporary tablespace.
images is the virtual directory for Oracle Application Express images. To support future Oracle Application Express upgrades, define the virtual image directory as /i/.
Example:
@apexins SYSAUX SYSAUX TEMP /i/
3) check installation log for errors
4) in command line go to $ORACLE_HOME/apex_3.2/apex
run sqlplus "/as sysdba"
in sqlplus run @apxconf
set admin password
set port
5) run @apxldimg.sql $ORACLE_HOME/apex_3.2
6) check for running listener and try to login apex: http:\\host:port\apex\apex_admin
Good luck!

How to install Oracle Report Services in Oracle Application Server 10.1.3.1

My project is running on Oracle Application Server(OAS) 10.1.3.1, and I need to develop some Oracle Reports for my client.
But I find out there is not "Oracle Report Services" component in OAS 10.1.3.1 like OAS 10.1.2.
Is there Oracle Report Services for OAS 10.1.3.1? How to get it?

Max Yuan wrote:
You mean I need to install 2 OAS(10.1.2 for report, 10.1.3 for my project), or deploy my project to 11g? For the Reports reporting project, you'll need a version/edition that includes AS Reports Services.
In "10gr2" that means AS 10.1.2.0.2 (plus Patch set): AS Infrastructure + AS BI&Forms installation (enterprise edition) or the standalone Forms and Reports installation (EE or separate licensing). You also need the Developer Suit (Reports Builder). OFM "11gr1" suite has some version of Reports Services but I don't know the available packages and installation types.

How to install ADF Runtime libraries to an Oracle Application Server 10g?

Scenario:
- JDev 10.1.3 (production) installed on my Win XP station.
- OC4J 10.1.3 Standalone installed on my Win XP station.
- OAS 10.1.3 (not OC4J Standalone) installed on a Linux SuSe server.
- I have admin credentials for the OAS but don't for the server.
Is it possible to install ADF Runtime from OAS Enterprise Manager? If yes, please, let me know. If not, I will have to bother server admin in order to copy those files. In this case, ca I rely on the log html file resulted from the install I made on my local OC4J instance in order to select the needed files?
Thanks in advance.
Regards,
Gustavo
São Paulo - Brasil

As far as i know the ADF libraries can be updated via the solution you gave :
Tools -> ADF Runtime Installer -> Oracle Application Server
but this only applies for an OAS installed on the same machine where jdev resides
for OAS in UNIX like systems i'm not sure if this can be done
as far as i know the libraries must be copied manually but i can't confirm this theory
i would like to know if it's possible to update the libraries from the Wizard on jdev installed on a windows machine to an OAS installed in UNIX?

Installing Oracle Application Server 10g 10.1.2.0.2 on RHEL 5.3

Dear All,
My Linux version is RedHat 5.3
I want to Install oracle 10g Application Server on it please help me out to do so.
Please help me,thanks in advance.
Please provide me with the documentation link to install Oracle Application Server 10g 10.1.2.0.2 on RHEL5.3
Thanks and Regards
Monoj Das

install Oracle Application Server 10g 10.1.2.0.2 on RHEL5.3
Said that OAS 10.1.2.0.2 is desupported, you have to apply patch 10.1.2.3 to be fully certified on OEL/RHEL 5.
See MOS doc. ID 564174.1 Oracle Application Server 10g (10.1.2) Installation Requirements for Linux OEL 5 and RHEL 5

Install and configure report service on Oracle Application Server 10g

i want to know how to install and configure report service on Oracle Application Server 10g Release 3 (10.1.3.1.0)
Thanks

the case is that we developed an ADF Application, so we want to deploy it on the latest version of Oracle Application server.
our application communicate with Oracle reports (run oracle reports from our Application) as there are no Oracle report products for JEE Application.
so if there are not report service that can run on Oracle Application Server 10g Release 3 (10.1.3.1.0),
what is the other choices that oracle supports that can help us in this case ???

Error while installing Oracle Applications 11i on Windows XP Home

Hi friends,
I am a functional consultant and trying to install oracle apps 11i on my home pc for learning purpose (I made a fresh install of windows for this purpose). I strictly followed the instructions given in following article:
http://mhabib.wordpress.com/2007/03/14/installing-oracle-applications-e-bussiness-11i-on-windows-xp/
Step1 and Step2 complete successfully to 100%, however just before moving to Step3 it gives error: "RW-50004: Error code received when running external process.". I am attaching last part of the log file. Could someone please help me out, because I have checked everything I could. Thanks for reading this:
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 26-MAR-2008 20:40:13
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCkrish))
The command completed successfully
ECHO is off.
Listener krish has already been started.
ECHO is off.
addlnctl.cmd exiting with status 0
"runProcess_4"
ChangeServiceConfig succeeded
"runProcess_5"
"Statusstring Creating the database controlfile..."
ECHO is off.
ECHO is off.
Wed 03/26/2008 08:40 PM
ECHO is off.
ECHO is off.
Wed 03/26/2008 08:40 PM
krish_agarwalkk.cmd exiting with status 0
ECHO is off.
The environment settings are as follows ...
ECHO is off.
ORACLE_HOME : f:\oracle\krishdb\9.2.0
LOCAL : krish
ORACLE_SID :
PATH : f:\oracle\krishdb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\;f:\oracle\krishdb\9.2.0\bin;f:\oracle\krishdb\9.2.0\jre\1.4.2\bin;f:\oracle\krishdb\9.2.0\jre\1.4.2\bin;f:\oracle\krishdb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\;f:\oracle\krishdb\9.2.0\bin;f:\oracle\krishdb\9.2.0\jre\1.4.2\bin;f:\oracle\krishdb\9.2.0\jre\1.4.2\bin;F:\WinEBS\startCD\Disk1\rapidwiz\unzip\NT;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\ATI Technologies\ATI.ACE\;C:\PROGRA~1\CA\SHARED~1\SCANEN~1;C:\PROGRA~1\CA\ETRUST~1;c:\cygwin\bin;C:\Program Files\Microsoft Visual Studio\Common\Tools\WinNT;C:\Program Files\Microsoft Visual Studio\Common\MSDev98\Bin;C:\Program Files\Microsoft Visual Studio\Common\Tools;C:\VC98\bin;C:\cygwin\bin;;C:\PROGRA~1\COMMON~1\MUVEET~1\030625
LD_LIBRARY_PATH : f:\oracle\krishdb\9.2.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
"f:\oracle\krishdb\9.2.0\appsutil\log\krish_agarwalkk\adcrdb_krish.txt"
ECHO is off.
ECHO is off.
Creating the control file for krish database ...
ECHO is off.
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Mar 26 20:40:26 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to an idle instance.
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Disconnected
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Mar 26 20:41:11 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
LRM-00109: could not open parameter file 'g:\oracle\krishdb\9.2.0\dbs\krish_bhawana_ifile.ora'
LRM-00113: error when processing file 'g:\oracle\krishdb\9.2.0\dbs\krish_bhawana_ifile.ora'
ORA-01078: failure in processing system parameters
CREATE CONTROLFILE REUSE SET DATABASE "krish"
ERROR at line 1:
ORA-01034: ORACLE not available
alter database open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
alter tablespace TEMP add tempfile 'f:\oracle\krishdata/tmp1.dbf' REUSE
ERROR at line 1:
ORA-01034: ORACLE not available
ALTER DATABASE RENAME GLOBAL_NAME TO "krish.kka.com"
ERROR at line 1:
ORA-01034: ORACLE not available
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Connected to an idle instance.
LRM-00109: could not open parameter file 'g:\oracle\krishdb\9.2.0\dbs\krish_bhawana_ifile.ora'
LRM-00113: error when processing file 'g:\oracle\krishdb\9.2.0\dbs\krish_bhawana_ifile.ora'
ORA-01078: failure in processing system parameters
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-01034: ORACLE not available
ORACLE instance shut down.
Connected to an idle instance.
LRM-00109: could not open parameter file 'g:\oracle\krishdb\9.2.0\dbs\krish_bhawana_ifile.ora'
LRM-00113: error when processing file 'g:\oracle\krishdb\9.2.0\dbs\krish_bhawana_ifile.ora'
ORA-01078: failure in processing system parameters
CREATE CONTROLFILE REUSE SET DATABASE "krish"
ERROR at line 1:
ORA-01034: ORACLE not available
alter database open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
alter tablespace TEMP add tempfile 'f:\oracle\krishdata/tmp1.dbf' REUSE
ERROR at line 1:
ORA-01034: ORACLE not available
ALTER DATABASE RENAME GLOBAL_NAME TO "krish.kka.com"
ERROR at line 1:
ORA-01034: ORACLE not available
declare lib_ver varchar2(3);
ERROR at line 1:
ORA-01034: ORACLE not available
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
ERROR:
ORA-01012: not logged on
SP2-0359: memory exhausted
Disconnected
adcrdb.cmd exiting with status 3
"Error returned while creating control files"
There was an error while running the command - f:\oracle\krishdb\9.2.0\temp\krish_agarwalkk\adrundb.cmd APPS APPS
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
RW-50010: Error: - script has returned an error: 3
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for krish instance

It will not install on XP Home, try professional instead.
5.10.2 on windows xp HOME?

Oracle application server 10.1.3.1.0 install - JAVA error

Hi Everyone,
I am trying to Install Oracle Application Server 10.1.3.1.0 on 32 bit Red Hat Enterprise Linux Server release 5.8 (Tikanga)
When running the Installer, I use the -ignoreSysPrereqs option because 10.1.3.1.0 is only supported with Linux Server 4, I believe. But I know people have installed it on Linux 5.7 and 5.8
anyways, Oracle application server gets installed and asks me to run root.sh. I run root.sh and then hit the OK button to proceed,
At this point, it tries to run the configuration assistant and fails right away with the following error:
Starting to execute configuration assistants
Launched configuration assistant 'Oracle Application Server Configuration Assistant'
Tool type is: Optional.
The command being spawned is: '/u01/app/oracle/product/10.1.3.1/jdk/bin/java -cp /u01/app/oracle/product/10.1.3.1/j2ee/home/applications/ascontrol/ascontrol/WEB-INF/lib/ascontrol.jar:/u01/app/oracle/product/10.1.3.1/j2ee/home/applications/ascontrol/ascontrol/WEB-INF/lib/log4j-core.jar:/u01/app/oracle/product/10.1.3.1/jlib/oraclepki.jar:/u01/app/oracle/product/10.1.3.1/jlib/ojmisc.jar: oracle.sysman.ias.studio.installer.ASControlConfigAssistant -sso false -j2eeinstance home -username oc4jadmin -password Protected value, not to be logged -oraclehome /u01/app/oracle/product/10.1.3.1'
Start output from spawned process:
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/sysman/ias/studio/installer/ASControlConfigAssistant
End output from spawned process.
Configuration assistant "Oracle Application Server Configuration Assistant" failed
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/sysman/ias/studio/installer/ASControlConfigAssistant
Any ideas? am i missing a library or environment variable?
Thanks

I have now set the following environment variables
ORACLE_BASE
ORACLE_HOME
TNS_ADMIN
PATH
JAVA HOME
and now when I try to run opmnctl startall, I get:
opmnctl: starting opmn and all managed processes...
globalInitNLS: NLS boot file not found or invalid
-- default linked-in boot block used
main: NLS initialization failed!!
globalInitNLS: NLS boot file not found or invalid
-- default linked-in boot block used
main: NLS initialization failed!!
globalInitNLS: NLS boot file not found or invalid
-- default linked-in boot block used
main: NLS initialization failed!!
opmnctl: opmn start failed.

Help Needed in installing oracle applications on Linux

Hey i am trying to install oracle applications 11i on Red Hat Linux 9. Is it possible to install.
if so can you please help me out with the patches required for the installation.
thanks in advance

Duplicate Post:
Re: Installing Oracle appliaction on Red Hat Linux 9

Help needed in installing oracle applications 11i in Linux

Hi every one . i m trying to install oracle applications 11i suite in Linux machine.. but i am getting error in the following way
Error in File System
Error - Unable to create directory with proper privileges:
Database ORACLE_HOME
Mount Point = /d02/oracle/proddb/9.0.2
and it continues for all the directories which application is trying to create..
And also Error in File Space Check
Error - Not enough free disk space on system :
Database ORACLE_HOME = /d02/oracle/proddb/9.2.0
required = 2905.0
available = 0.0
I have some 140 GB free space in my disk... Please help me out... thankx in advance

Nothing changed .. its shows the same error...
i will explain my scenario... i have a dump of Oracle suite in Hard Drive.
assigned value to LD_ASSUME_KERNEL
Creater Users. group
created directories oracle & apps
and given permissions... to the directories...
Its showing the same error again and again... plz help out

How to install Oracle Application Testing Suite on ubuntu 12.4 64 bits?

Hi Guys,
I am trying to install Oracle Application Testing Suite on ubuntu 12.4 64 bits, I have downloaded the application (Oracle Application Testing Suite 12.1.0.1.0 - Complete Install ) from http://www.oracle.com/technetwork/oem/app-test/index-084446.html, unzipped the zip file and then did sh setup.sh and I got this error:
Exception java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-07-10_11-42-14AM/jre/lib/i386/xawt/libmawt.so: libXtst.so.6: cannot open shared object file: No such file or directory occurred..
java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-07-10_11-42-14AM/jre/lib/i386/xawt/libmawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
     at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1807)
     at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1703)
     at java.lang.Runtime.load0(Runtime.java:770)
     at java.lang.System.load(System.java:1003)
     at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1807)
     at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1724)
     at java.lang.Runtime.loadLibrary0(Runtime.java:823)
     at java.lang.System.loadLibrary(System.java:1028)
     at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.awt.Toolkit.loadLibraries(Toolkit.java:1605)
     at java.awt.Toolkit.<clinit>(Toolkit.java:1627)
     at oracle.bali.ewt.olaf.OracleLookAndFeel.<clinit>(Unknown Source)
     at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager._useOracleLookAndFeel(OiifmGraphicInterfaceManager.java:243)
     at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:263)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:209)
     at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:243)
     at oracle.sysman.oii.oiic.OiicInstaller.getInterfaceManager(OiicInstaller.java:466)
     at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:965)
     at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:905)
Exception in thread "main" java.lang.NoClassDefFoundError: Could not initialize class oracle.bali.ewt.olaf.OracleLookAndFeel
     at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager._useOracleLookAndFeel(OiifmGraphicInterfaceManager.java:243)
     at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:263)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:209)
     at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:243)
     at oracle.sysman.oii.oiif.oiifm.OiifmAlert.<clinit>(OiifmAlert.java:151)
     at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:1023)
     at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:905)
I have downloaded 64 bits for Linux but it comes with jre/lib/i386 which to my understanding it is 32 bits jre.
any help please on how to install this application on ubuntu 12.4 64 bits.
Many thanks in advance.
Regards,

Hi
OATS is not supported on Ubuntu only on OEL 5.2 and 4u8 both 64 bit
Thanks and Regards
Alex

Oracle Applications Install on AMD chipset

Similar Messages

Maybe you are looking for