Oracle Applications Manager Workflow processes/activites

Hi All
I need to know what exactly is the item type OAM_BE is used for? Does purging the old data associated with the same can have any effect on the system?
Rgds...R

Hi sachin;
Any errors in the workflow mailer log file?
Any errors in the database log file?
Did you try to bounce the workflow services?
Please check below and see its helpful for your issue:
How to Resend Workflow e-mail Notifications Correctly Sent [ID 942267.1]
How To Resend Notifications That Failed [ID 784040.1]
Please also check Hussein Sawwan's greatest previous post about simalar thread:
Workflow notification Mailer Not sending notifitions in R12
Regard
Helios

Similar Messages

Oracle Applications Manager -- Workflow Manager -- Notification Mailer

Hi All,
We are facing an issue in the R12 E- Business Suite Po Approval Workflow cycle. The PO is being approved and
the buyer while approving the PO is mentioning the email address where the Po Approval Notification needs to be emailed.
The Po gets approved and in thw wf_notifications table we could see two records entered with the Message Type as mentioned below :
Message Type : PO_PO_HAS_BEEN_APPROVE , status : OPEN and mail_status : SENT , Recipient Role : DCASTAGNA
-- This is fine because the user DCASTAGNA , is receiving the email at the email address which is linked to the
fnd_user record in Oracle. This is an FYI notification which just says The PO has been approved
Message Type : PO_EMAIL_PO , status : OPEN and mail_status : FAILED, Recipient Role : [email protected] -- Why this status is showing as Failed.. The user is not receiving this email notification.
The issue is that the user whose email address has been keyed is not receiving the email notification.
We have the Workflow Notification Mailer configured which would listen to the Send Notification Message posted by the Workflow Engine.
Could someone please help with this issue after we have upgraded to R12. The user is receiving 1 email notifiaction but not receiving the email for the 2nd Message present in the wf_notifications table.
We are stuck because of this issue.
Thanks
sachin.

Hi sachin;
Any errors in the workflow mailer log file?
Any errors in the database log file?
Did you try to bounce the workflow services?
Please check below and see its helpful for your issue:
How to Resend Workflow e-mail Notifications Correctly Sent [ID 942267.1]
How To Resend Notifications That Failed [ID 784040.1]
Please also check Hussein Sawwan's greatest previous post about simalar thread:
Workflow notification Mailer Not sending notifitions in R12
Regard
Helios

Clicking on workflow from oracle applications manager getting directed to http instead of https

Oracle DB:11.2.0.3.0
Oracle Apps: 12.1.3
O/S: Sun Solaris
Hi All,
We are facing s strange issue - Whenever we click on workflow from oracle applications manager, it's getting directed to http instead of https?
Could anyone please share the fix to the above issue.
Thanks for your time.
Regards,

I've noticed that lsmod | grep agp gives me this output:
intel_agp 25436 1
agpgart 29332 2 drm,intel_agp
Is alright to see the intel_agp module or should I use ati_agp?
That module is motherboard dependent or VGA dependent?
Edit:
dmesg | grep agp
agpgart-intel 0000:00:00.0: Intel 865 Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
agpgart-intel 0000:00:00.0: AGP 3.0 bridge
agpgart-intel 0000:00:00.0: putting AGP V3 device into 4x mode
Last edited by pazioman (2009-06-04 14:25:59)

Oracle Application Manager

I know Oracle sells complete solutions. I know I don't need a complete. I just need a strong EJB application manager (like BEA WebLogic, or Imprise's Application Server)
which should be integrated later to a larger complete B2B solution.
Any answers will be gratituded*
Thanks.
*by sending a smiley on your phone, or whatever...

Yadnesh wrote:
Hi,
After navigating through System Administrator-->Oracle Application Manager -->concurrent Manager
a webpage is opened which displays various status overviews of various managers.
I want to know where are these status stored on back end(SQL developer).
Please help me which table would help me fetch the status of the managers.
Thanks in advance.FND_CONCURRENT_QUEUES_VL -- http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=FND_CONCURRENT_QUEUES_VL&c_owner=APPS&c_type=VIEW
FND_CONCURRENT_QUEUES -- http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=FND_CONCURRENT_QUEUES&c_owner=APPLSYS&c_type=TABLE
Concurrent Processing - What are the Meaning of the Codes in the STATUS_CODE and PHASE_CODE Columns of FND_CONCURRENT_REQUESTS Table? [ID 152209.1]
How To Determine Table and Column Name from a Field in a Form in 11i [ID 259722.1]
Thanks,
Hussein

Oracle Application Management Pack for Siebel 10gR4 is GA

Oracle Application Management Pack for Siebel 10gR4 is now generally available.
Go to this OTN page if you want more information about the product.
http://www.oracle.com/technology/products/oem/prod_focus/app_mgmt.html
You may also download it from OTN to try it out as part of Enterprise Manager 10gR4. We will be demonstrating it at booths D8 and J7 at the Oracle Demoground at Moscone South Hall, at session S291922 at Moscone West L2-2001 on Monday, 11/12 from 3:15 to 4:15 p.m., and at the Siebel Pack Hands-on Lab (S294089) at Marriott Hotel Golden Gate Room B1 on Thursday, 11/15 from 11:30 a.m.-12:30 p.m.
The Siebel Pack is designed to be a complete and integrated management tool for Siebel. Using this management pack, you may get proactive alerts on impending problems on the application, examine run-time statistics to troubleshoot and tune performance, compare configurations across different environments, keep track of configuration changes, proactively enforce configuration policies in order to avoid configuration related problems, monitor and report on service level delivered by the application and performance diagnostics of user and server performance. The pack may be used with other Oracle Enterprise Manager management packs and plug-in’s to achieve end-to-end management of the entire application environment, including both Oracle and non-Oracle databases, operating systems, storage and network devices.
The 10gR4 release of this pack adds integrated Siebel Transaction Diagnostic support using data captured via Siebel Application Response Measurement (SARM) framework. With this tool, you may:
- Analyze request processing for individual user requests
- Analyze CPU and memory consumption of processing requests for different Siebel Server Components
- Visualize SARM metric data graphically
- Compare performance profiles over time
- Create performance reports and share them with your co-worker for collaborative performance diagnostics
The 10gR4 version of this Siebel Transaction Diagnostic tool also adds support for Siebel 7.7 and 7.8 in addition to being compatible with Siebel 8.0. It is fully integrated with Oracle Enterprise Manager, which eliminates the need for separate install and user maintenance, and it runs on all operating system platforms that Oracle Enterprise Manager supports.

Working with the Oracle Enterprise Manager group to integrate closely with their monitoring solutions has been one of the most important advantages of joining the Oracle team. As our customers have started to use CRM more deeply as part of their business processes, CRM has quickly become Mission Critical, with 24/7 uptime requirements. Furthermore, as CRM becomes further integrated into the enterprise, knowing the status and health of the connections to multiple backend systems becomes evermore crucial.
Through our partnership with the Oracle Enterprise Manager, we aim to support true Enterprise-class CRM. We are the only solution out there with over six million live users, and we are leveraging the knowledge gained from those customers in our Enterprise Manager integration. With the real-time monitoring and diagnosis that Oracle Enterprise Manager provides, we simplify the process of managing sophisticated CRM implementations which span organizations and systems. If you have a Siebel implementation with four servers or more, or with integrations to several systems, you owe it to yourself to check out Oracle Enterprise Manager.

Oracle Application Management Pack for Siebel

Does anyone on this board have any experience with the Oracle 10G Grid Control software and the Oracle Application Management Pack for Siebel. The installation of the Oracle Enterprise Manager Grid Control with the Siebel Management Pack has been successful on the Windows 2003 servers and we can view a list of the servers within Oracle's OEM tool. The problem I am facing is when I try to add a Siebel Enterprise. I receive the following error when I attempt to add a Siebel Enterprise.
An error occured while adding Siebel Enterprise.
Credentials - Missing Credentials for host <HOST_NAME>
All of the credentials have been added properly. Does anyone have any experience or success using this product? If so please reply with feedback.
.

Please log a service request with tech support so that we can track this inquiry. On the service request, capture a screenshot of the page where you defined the host preferred credentials, and tell us the names of your servers.
Btw, I take that you are stuck in the step in which you:
- Click the "Add Enterprise" button to add the enterprise
- Fill in the 7 parameters
- Click Ok to start the discovery process
Which release of Siebel and Enterprise Manager are you using?
Chung

How to access Oracle Application Manager

Dear All,
I have installed EBS R12.0 in Oracle Enterprise Linux Release 4 environment. Through browser I am able to login using sysadmin username and password however I am unable to find Oracle Application Manager or AutoConfig option any where. Can any of you please tell me how I can enable or access OAM.
Kindly mention the step by step procedure.
Regards,
Asif

Hi Asif;
I have installed EBS R12.0 in Oracle Enterprise Linux Release 4 environment. Through browser I am able to login using sysadmin username and password however I am unable to find Oracle Application Manager or AutoConfig option any where. Can any of you please tell me how I can enable or access OAM.For OAM:
Login as sysadmin >> System Administrator>> Oracle Applications Manager (There are link under this)>> click dashboard then u will see Site map top of page click it
you will see System Configuration>>AutoConfig there
Regard
Helios

Host status is unavailable oracle application manager

Hi All
we have EBS 11.5.10.2 on MultiNode servers (SUNFIRE V890I) with solaris 10 platform
after converting to multinode system we notice that host status in oracle application manager for one of the two nodes is UNAVAILABLE
the system is working fine but it's confusing of making troubles in future
could you please provide us with more information about this issue
Thanks
Mohamed

Hi,
1) Make sure you have a valid entry in the hosts file and you can ping the server. Also, make sure this node is trusted registered in the database.
Note: 429328.1 - Application Server Status Always Shown as Down in OAM
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=429328.1
Note: 287415.1 - Host Status In Application Dashboard Overview Tab Shown As Down in OAM
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=287415.1
2) Clear the FND_NODES table, and run AutoConfig on the database tier, then on the application tier (on every application tier node)
Note: 391406.1 - How to get a clean Autoconfig Environment
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=391406.1
Regards,
Hussein

Oracle Application Manager - Patching and Utilities

Is there a section within the Patching and Utilities part of Oracle Application Manager where you can view the Navigation Path to forms where any changes were made/updated by the patch?
Thanks

864641 wrote:
Is there a section within the Patching and Utilities part of Oracle Application Manager where you can view the Navigation Path to forms where any changes were made/updated by the patch?
ThanksYes -- OAM > Patching and Utilities > Search for the Patch > Click on Details > Click on "Files Copied" and you will see the list of copied/updated form/reports/sql ..etc
OAM Usage And Navigation [ID 352235.1]
http://docs.oracle.com/cd/E18727_01/doc.121/e12148/T531058T531064.htm
Thanks,
Hussein

Oracle Application Management Pack

Hi,
We have R12 of EBS and asked to install Oracle Application Management Pack. I could see 394448.1 : Oracle Application Management Pack for Oracle E-Business Suite, Release 2.0 .
Do we need to reinstall OEM or simply applying patches as per metalink notes 394448.1?
Awaiting ur reply..

Hi,
I applied appspack patch 6809246 and it's applied successfully. after this I looged in to oem url and checked to see if the instance has been added under Targets>Oracle Applications. It was not there. Do we need to add databse there?I tried to add instance name and it was asking for "Monitoring Schema Username, Monitoring Schema Password, Monitoring Applications Username, Monitoring Applications User Password "
From where we get those details and do we need to add database explicitly?
Regards

Oracle Applications Manager - Compatibility ,Download, Installation

Hi People!
Is Oracle Application Manager compatible with Oracle Applications 11.03?
Where Can I download it or wich cd is it included.
Best Regards!

So, how should I do that????
I installed the "ORacle Management Pack" and "Oracle Enterprise Manager with ORacle Tuning Change Management and Diagnostics Packs" and i´m trying to use.
Best Regards!

Clone Oracle Applications 11i using Oracle Application Manager

Hi All,
I am working on the following Metalink documents:
*[Note: 398619.1 - Clone Oracle Applications 11i using Oracle Application Manager (OAM Clone)|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=398619.1]*
I am bit confused, if I am doing Cloning with OAM and providing all the information about the target system how does it work?
Is it that, cloning with OAM will make the required templates and I will have to just take the backup of my database and application and have to restore it on target machine and cloning is done!
Please suggest,
Anchorage

Is it that, cloning with OAM will make the required templates and I will have to just take the backup of my database and application and have to restore it on target machine and cloning is done!This is not enough. You still need to complete the following steps on the target node:
Task 5: Configure the Target System
Task 6: Initiate Data Purge
Task 7: Review Checklist

Look and feel of self-service pages under Oracle Applications Manager (OAM)

Hi All,
After applying patches for upgrading the HRMS module from 12.1.3 to 12.1.5, look and feel of self-service pages under Oracle Applications Manager (OAM) changed means Buttons not appearing in proper manner. and look of pages are not in proper manner. This is happening for OAM self-service pages only.
Current HRMS patchset level : r12.hr_pf.b.delta.5
OS : RHEL 5.3 x86_64
Any idea please....
Thanks inadvance,
Regards,
900076.

You need to ask your DBA to delete the cached stylesheets in /OA_HTML/cabo/styles/cache/...
You will also need to delete your temporary internet files.
Once both and deleted, re-access the page and you will see the updated stylesheets.
(Note: individual users may need to delete their temporary internet files too else they will see an old version cached on their computer)
Explanation: In new releases Oracle may introduce new additional OAF components. Each OAF component is assigned a shortcode/id by browsers in alphabetical order and a stylesheet generated.
If a new item is introduced, the shortcode/ids will change. However if an old version of the stylesheet still exists it will apply the wrong style to the wrong component.

Oracle Application Services Background Processes

Hi all,
Can any one list the Oracle Application services background processes.
adopmnctl.sh
adalnctl.sh
adapcctl.sh
adoacorectl.sh
adformsctl.sh
adoafmctl.sh
adcmctl.sh
jtffmctl.sh
Ex: adcmcttl.sh ---> FNDLIBR
Thanks,
Ramaraju

Hi Ramaraju,
You can identify the background process as below:
For - adopmnctl.sh | adapcctl.sh | adoacorectl.sh | adformsctl.sh | adoafmctl.sh
./adopmnctl.sh status -l
For Example :
Above command will give you the process id (Refer pid column) as shown below:
---------------------------------+--------------------+---------+----------+-
ias-component                    | process-type       |     pid | status   |
---------------------------------+--------------------+---------+----------+-
OC4JGroup:default_group          | OC4J:oafm          |   13457 | Alive    |
OC4JGroup:default_group          | OC4J:forms         |   13386 | Alive    |
OC4JGroup:default_group          | OC4J:oacore        |   13234 | Alive    |
HTTP_Server                      | HTTP_Server        |   13177 | Alive    |
ps -ef|grep <pid>
For - adalnctl.sh -
ps -ef|grep lsnr
Regards,
Kiran

Can not Start Oracle Application Server ORB process

I have just installed Oracle Application Server (OAS) on my
machine running Windows NT 4.0 Workstation. When I logon to the
OAS manager and tried to start ORB, I got below error message:
Please wait while the command is being processed on host ssoh_x
YOT-11034, Unable to make address: IP://ssoh_x.jgfhome:2649.
Error: YT::EXCEPTION::BADPARAM::NOSUCHADDR
Starting ORB processes...Returning filename D:
\orant\orb\admin\.event
waiting for ORB to be ready...
YOT-11034, Unable to make address: IP://ssoh_x.jgfhome:2649.
Error: YT::EXCEPTION::BADPARAM::NOSUCHADDR
ORB is not responding. Please restart manually...
I have tried to re-install OAS for the second time. But I still
got the same problem.
I plan to use the OAS, together with Oracle Internet Commerce
Server (ICS) to develop an e-commerce project. I am yet to
download and install the ICS. I don't have any Oracle databases
installed in my machine. I'm using MS SQL Server 7.0 instead.
Please advised me on how to configure the ORB so that I'll be
able to start the application server.
null

Hi,
Sock Hoon (guest) wrote:
: I have just installed Oracle Application Server (OAS) on my
: machine running Windows NT 4.0 Workstation. When I logon to the
OAS don't run on Win NT with installed service pack 4.
Go back to service pack 3 or apply patch from Developer 6.0 to
OAS.
: OAS manager and tried to start ORB, I got below error message:
: Please wait while the command is being processed on host ssoh_x
: YOT-11034, Unable to make address: IP://ssoh_x.jgfhome:2649.
: Error: YT::EXCEPTION::BADPARAM::NOSUCHADDR
: Starting ORB processes...Returning filename D:
: \orant\orb\admin\.event
: waiting for ORB to be ready...
: YOT-11034, Unable to make address: IP://ssoh_x.jgfhome:2649.
: Error: YT::EXCEPTION::BADPARAM::NOSUCHADDR
: ORB is not responding. Please restart manually...
: I have tried to re-install OAS for the second time. But I still
: got the same problem.
: I plan to use the OAS, together with Oracle Internet Commerce
: Server (ICS) to develop an e-commerce project. I am yet to
: download and install the ICS. I don't have any Oracle databases
: installed in my machine. I'm using MS SQL Server 7.0 instead.
: Please advised me on how to configure the ORB so that I'll be
: able to start the application server.
Best regards Andrew
null

Oracle Applications Manager Workflow processes/activites

Similar Messages

Maybe you are looking for